/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*- #include "Copter.h" static bool land_with_gps; static uint32_t land_start_time; static bool land_pause; // land_init - initialise land controller bool Copter::land_init(bool ignore_checks) { // check if we have GPS and decide which LAND we're going to do land_with_gps = position_ok(); if (land_with_gps) { // set target to stopping point Vector3f stopping_point; wp_nav.get_loiter_stopping_point_xy(stopping_point); wp_nav.init_loiter_target(stopping_point); } // initialize vertical speeds and leash lengths pos_control.set_speed_z(wp_nav.get_speed_down(), wp_nav.get_speed_up()); pos_control.set_accel_z(wp_nav.get_accel_z()); // initialise altitude target to stopping point pos_control.set_target_to_stopping_point_z(); land_start_time = millis(); land_pause = false; // reset flag indicating if pilot has applied roll or pitch inputs during landing ap.land_repo_active = false; return true; } // land_run - runs the land controller // should be called at 100hz or more void Copter::land_run() { if (land_with_gps) { land_gps_run(); }else{ land_nogps_run(); } } // land_run - runs the land controller // horizontal position controlled with loiter controller // should be called at 100hz or more void Copter::land_gps_run() { int16_t roll_control = 0, pitch_control = 0; float target_yaw_rate = 0; // if not auto armed or landed or motor interlock not enabled set throttle to zero and exit immediately if(!ap.auto_armed || ap.land_complete || !motors.get_interlock()) { #if FRAME_CONFIG == HELI_FRAME // Helicopters always stabilize roll/pitch/yaw // call attitude controller attitude_control.angle_ef_roll_pitch_rate_ef_yaw_smooth(0, 0, 0, get_smoothing_gain()); attitude_control.set_throttle_out(0,false,g.throttle_filt); #else // multicopters do not stabilize roll/pitch/yaw when disarmed attitude_control.set_throttle_out_unstabilized(0,true,g.throttle_filt); #endif wp_nav.init_loiter_target(); #if LAND_REQUIRE_MIN_THROTTLE_TO_DISARM == ENABLED // disarm when the landing detector says we've landed and throttle is at minimum if (ap.land_complete && (ap.throttle_zero || failsafe.radio)) { init_disarm_motors(); } #else // disarm when the landing detector says we've landed if (ap.land_complete) { init_disarm_motors(); } #endif return; } // relax loiter target if we might be landed if (ap.land_complete_maybe) { wp_nav.loiter_soften_for_landing(); } // process pilot inputs if (!failsafe.radio) { if (g.land_repositioning) { // apply SIMPLE mode transform to pilot inputs update_simple_mode(); // process pilot's roll and pitch input roll_control = channel_roll->control_in; pitch_control = channel_pitch->control_in; // record if pilot has overriden roll or pitch if (roll_control != 0 || pitch_control != 0) { ap.land_repo_active = true; } } // get pilot's desired yaw rate target_yaw_rate = get_pilot_desired_yaw_rate(channel_yaw->control_in); } // process roll, pitch inputs wp_nav.set_pilot_desired_acceleration(roll_control, pitch_control); #if PRECISION_LANDING == ENABLED // run precision landing if (!ap.land_repo_active) { wp_nav.shift_loiter_target(precland.get_target_shift(wp_nav.get_loiter_target())); } #endif // run loiter controller wp_nav.update_loiter(ekfGndSpdLimit, ekfNavVelGainScaler); // call attitude controller attitude_control.angle_ef_roll_pitch_rate_ef_yaw(wp_nav.get_roll(), wp_nav.get_pitch(), target_yaw_rate); // pause 4 seconds before beginning land descent float cmb_rate; if(land_pause && millis()-land_start_time < 4000) { cmb_rate = 0; } else { land_pause = false; cmb_rate = get_land_descent_speed(); } // record desired climb rate for logging desired_climb_rate = cmb_rate; // update altitude target and call position controller pos_control.set_alt_target_from_climb_rate(cmb_rate, G_Dt, true); pos_control.update_z_controller(); } // land_nogps_run - runs the land controller // pilot controls roll and pitch angles // should be called at 100hz or more void Copter::land_nogps_run() { float target_roll = 0.0f, target_pitch = 0.0f; float target_yaw_rate = 0; // process pilot inputs if (!failsafe.radio) { if (g.land_repositioning) { // apply SIMPLE mode transform to pilot inputs update_simple_mode(); // get pilot desired lean angles get_pilot_desired_lean_angles(channel_roll->control_in, channel_pitch->control_in, target_roll, target_pitch); } // get pilot's desired yaw rate target_yaw_rate = get_pilot_desired_yaw_rate(channel_yaw->control_in); } // if not auto armed or landed or motor interlock not enabled set throttle to zero and exit immediately if(!ap.auto_armed || ap.land_complete || !motors.get_interlock()) { #if FRAME_CONFIG == HELI_FRAME // Helicopters always stabilize roll/pitch/yaw // call attitude controller attitude_control.angle_ef_roll_pitch_rate_ef_yaw_smooth(target_roll, target_pitch, target_yaw_rate, get_smoothing_gain()); attitude_control.set_throttle_out(0,false,g.throttle_filt); #else // multicopters do not stabilize roll/pitch/yaw when disarmed attitude_control.set_throttle_out_unstabilized(0,true,g.throttle_filt); #endif #if LAND_REQUIRE_MIN_THROTTLE_TO_DISARM == ENABLED // disarm when the landing detector says we've landed and throttle is at minimum if (ap.land_complete && (ap.throttle_zero || failsafe.radio)) { init_disarm_motors(); } #else // disarm when the landing detector says we've landed if (ap.land_complete) { init_disarm_motors(); } #endif return; } // call attitude controller attitude_control.angle_ef_roll_pitch_rate_ef_yaw_smooth(target_roll, target_pitch, target_yaw_rate, get_smoothing_gain()); // pause 4 seconds before beginning land descent float cmb_rate; if(land_pause && millis()-land_start_time < LAND_WITH_DELAY_MS) { cmb_rate = 0; } else { land_pause = false; cmb_rate = get_land_descent_speed(); } // record desired climb rate for logging desired_climb_rate = cmb_rate; // call position controller pos_control.set_alt_target_from_climb_rate(cmb_rate, G_Dt, true); pos_control.update_z_controller(); } // get_land_descent_speed - high level landing logic // returns climb rate (in cm/s) which should be passed to the position controller // should be called at 100hz or higher float Copter::get_land_descent_speed() { #if CONFIG_SONAR == ENABLED bool sonar_ok = sonar_enabled && (sonar.status() == RangeFinder::RangeFinder_Good); #else bool sonar_ok = false; #endif // if we are above 10m and the sonar does not sense anything perform regular alt hold descent if (pos_control.get_pos_target().z >= pv_alt_above_origin(LAND_START_ALT) && !(sonar_ok && sonar_alt_health >= SONAR_ALT_HEALTH_MAX)) { return pos_control.get_speed_down(); }else{ return -abs(g.land_speed); } } // land_do_not_use_GPS - forces land-mode to not use the GPS but instead rely on pilot input for roll and pitch // called during GPS failsafe to ensure that if we were already in LAND mode that we do not use the GPS // has no effect if we are not already in LAND mode void Copter::land_do_not_use_GPS() { land_with_gps = false; } // set_mode_land_with_pause - sets mode to LAND and triggers 4 second delay before descent starts // this is always called from a failsafe so we trigger notification to pilot void Copter::set_mode_land_with_pause() { set_mode(LAND); land_pause = true; // alert pilot to mode change AP_Notify::events.failsafe_mode_change = 1; } // landing_with_GPS - returns true if vehicle is landing using GPS bool Copter::landing_with_GPS() { return (control_mode == LAND && land_with_gps); }