#include #include #include "AC_WPNav_OA.h" AC_WPNav_OA::AC_WPNav_OA(const AP_InertialNav& inav, const AP_AHRS_View& ahrs, AC_PosControl& pos_control, const AC_AttitudeControl& attitude_control) : AC_WPNav(inav, ahrs, pos_control, attitude_control) { } // returns object avoidance adjusted wp location using location class // returns false if unable to convert from target vector to global coordinates bool AC_WPNav_OA::get_oa_wp_destination(Location& destination) const { // if oa inactive return unadjusted location if (_oa_state == AP_OAPathPlanner::OA_NOT_REQUIRED) { return get_wp_destination_loc(destination); } // return latest destination provided by oa path planner destination = _oa_destination; return true; } /// set_wp_destination waypoint using position vector (distance from ekf origin in cm) /// terrain_alt should be true if destination.z is a desired altitude above terrain /// returns false on failure (likely caused by missing terrain data) bool AC_WPNav_OA::set_wp_destination(const Vector3f& destination, bool terrain_alt) { const bool ret = AC_WPNav::set_wp_destination(destination, terrain_alt); if (ret) { // reset object avoidance state _oa_state = AP_OAPathPlanner::OA_NOT_REQUIRED; } return ret; } /// get_wp_distance_to_destination - get horizontal distance to destination in cm /// always returns distance to final destination (i.e. does not use oa adjusted destination) float AC_WPNav_OA::get_wp_distance_to_destination() const { if (_oa_state == AP_OAPathPlanner::OA_NOT_REQUIRED) { return AC_WPNav::get_wp_distance_to_destination(); } // get current location const Vector3f &curr = _inav.get_position(); return norm(_destination_oabak.x-curr.x, _destination_oabak.y-curr.y); } /// get_wp_bearing_to_destination - get bearing to next waypoint in centi-degrees /// always returns bearing to final destination (i.e. does not use oa adjusted destination) int32_t AC_WPNav_OA::get_wp_bearing_to_destination() const { if (_oa_state == AP_OAPathPlanner::OA_NOT_REQUIRED) { return AC_WPNav::get_wp_bearing_to_destination(); } return get_bearing_cd(_inav.get_position(), _destination_oabak); } /// true when we have come within RADIUS cm of the waypoint bool AC_WPNav_OA::reached_wp_destination() const { return (_oa_state == AP_OAPathPlanner::OA_NOT_REQUIRED) && AC_WPNav::reached_wp_destination(); } /// update_wpnav - run the wp controller - should be called at 100hz or higher bool AC_WPNav_OA::update_wpnav() { // run path planning around obstacles AP_OAPathPlanner *oa_ptr = AP_OAPathPlanner::get_singleton(); Location current_loc; if ((oa_ptr != nullptr) && AP::ahrs().get_position(current_loc)) { // backup _origin and _destination when not doing oa if (_oa_state == AP_OAPathPlanner::OA_NOT_REQUIRED) { _origin_oabak = _origin; _destination_oabak = _destination; _terrain_alt_oabak = _terrain_alt; } // convert origin and destination to Locations and pass into oa const Location origin_loc(_origin_oabak, _terrain_alt_oabak ? Location::AltFrame::ABOVE_TERRAIN : Location::AltFrame::ABOVE_ORIGIN); const Location destination_loc(_destination_oabak, _terrain_alt_oabak ? Location::AltFrame::ABOVE_TERRAIN : Location::AltFrame::ABOVE_ORIGIN); Location oa_origin_new, oa_destination_new; AP_OAPathPlanner::OAPathPlannerUsed path_planner_used = AP_OAPathPlanner::OAPathPlannerUsed::None; const AP_OAPathPlanner::OA_RetState oa_retstate = oa_ptr->mission_avoidance(current_loc, origin_loc, destination_loc, oa_origin_new, oa_destination_new, path_planner_used); switch (oa_retstate) { case AP_OAPathPlanner::OA_NOT_REQUIRED: if (_oa_state != oa_retstate) { // object avoidance has become inactive so reset target to original destination set_wp_destination(_destination_oabak, _terrain_alt_oabak); _oa_state = oa_retstate; } break; case AP_OAPathPlanner::OA_PROCESSING: case AP_OAPathPlanner::OA_ERROR: // during processing or in case of error stop the vehicle // by setting the oa_destination to a stopping point if ((_oa_state != AP_OAPathPlanner::OA_PROCESSING) && (_oa_state != AP_OAPathPlanner::OA_ERROR)) { // calculate stopping point Vector3f stopping_point; get_wp_stopping_point(stopping_point); _oa_destination = Location(stopping_point, Location::AltFrame::ABOVE_ORIGIN); if (set_wp_destination(stopping_point, false)) { _oa_state = oa_retstate; } } break; case AP_OAPathPlanner::OA_SUCCESS: // handling of returned destination depends upon path planner used switch (path_planner_used) { case AP_OAPathPlanner::OAPathPlannerUsed::None: // this should never happen. this means the path planner has returned success but has failed to set the path planner used INTERNAL_ERROR(AP_InternalError::error_t::flow_of_control); return false; case AP_OAPathPlanner::OAPathPlannerUsed::Dijkstras: // Dijkstra's. Action is only needed if path planner has just became active or the target destination's lat or lon has changed if ((_oa_state != AP_OAPathPlanner::OA_SUCCESS) || !oa_destination_new.same_latlon_as(_oa_destination)) { Location origin_oabak_loc(_origin_oabak, _terrain_alt_oabak ? Location::AltFrame::ABOVE_TERRAIN : Location::AltFrame::ABOVE_ORIGIN); Location destination_oabak_loc(_destination_oabak, _terrain_alt_oabak ? Location::AltFrame::ABOVE_TERRAIN : Location::AltFrame::ABOVE_ORIGIN); oa_destination_new.linearly_interpolate_alt(origin_oabak_loc, destination_oabak_loc); if (!set_wp_destination_loc(oa_destination_new)) { // trigger terrain failsafe return false; } // if new target set successfully, update oa state and destination _oa_state = oa_retstate; _oa_destination = oa_destination_new; } break; case AP_OAPathPlanner::OAPathPlannerUsed::BendyRulerHorizontal: { _oa_state = oa_retstate; _oa_destination = oa_destination_new; // altitude target interpolated from current_loc's distance along the original path Location target_alt_loc = current_loc; target_alt_loc.linearly_interpolate_alt(origin_loc, destination_loc); // correct target_alt_loc's alt-above-ekf-origin if using terrain altitudes // positive terr_offset means terrain below vehicle is above ekf origin's altitude float terr_offset = 0; if (_terrain_alt_oabak && !get_terrain_offset(terr_offset)) { // trigger terrain failsafe return false; } // calculate final destination as an offset from EKF origin in NEU Vector2f dest_NE; if (!_oa_destination.get_vector_xy_from_origin_NE(dest_NE)) { // this should never happen because we can only get here if we have an EKF origin INTERNAL_ERROR(AP_InternalError::error_t::flow_of_control); return false; } Vector3p dest_NEU{dest_NE.x, dest_NE.y, (float)target_alt_loc.alt}; // pass the desired position directly to the position controller _pos_control.input_pos_xyz(dest_NEU, terr_offset, 1000.0); // update horizontal position controller (vertical is updated in vehicle code) _pos_control.update_xy_controller(); // return success without calling parent AC_WPNav return true; } case AP_OAPathPlanner::OAPathPlannerUsed::BendyRulerVertical: { _oa_state = oa_retstate; _oa_destination = oa_destination_new; // calculate final destination as an offset from EKF origin in NEU Vector3f dest_NEU; if (!_oa_destination.get_vector_from_origin_NEU(dest_NEU)) { // this should never happen because we can only get here if we have an EKF origin INTERNAL_ERROR(AP_InternalError::error_t::flow_of_control); return false; } // pass the desired position directly to the position controller as an offset from EKF origin in NEU Vector3p dest_NEU_p{dest_NEU.x, dest_NEU.y, dest_NEU.z}; _pos_control.input_pos_xyz(dest_NEU_p, 0, 1000.0); // update horizontal position controller (vertical is updated in vehicle code) _pos_control.update_xy_controller(); // return success without calling parent AC_WPNav return true; } } } } // run the non-OA update return AC_WPNav::update_wpnav(); }