#pragma once #include #include #include #include #include #include #include // Inertial Navigation library #include // Position control library #include // Attitude control library #include #include // Stop at fence library // maximum velocities and accelerations #define WPNAV_ACCELERATION 250.0f // maximum horizontal acceleration in cm/s/s that wp navigation will request #define WPNAV_WP_SPEED 1000.0f // default horizontal speed between waypoints in cm/s #define WPNAV_WP_SPEED_MIN 20.0f // minimum horizontal speed between waypoints in cm/s #define WPNAV_WP_RADIUS 200.0f // default waypoint radius in cm #define WPNAV_WP_RADIUS_MIN 5.0f // minimum waypoint radius in cm #define WPNAV_WP_SPEED_UP 250.0f // default maximum climb velocity #define WPNAV_WP_SPEED_DOWN 150.0f // default maximum descent velocity #define WPNAV_WP_ACCEL_Z_DEFAULT 100.0f // default vertical acceleration between waypoints in cm/s/s class AC_WPNav { public: /// Constructor AC_WPNav(const AP_InertialNav& inav, const AP_AHRS_View& ahrs, AC_PosControl& pos_control, const AC_AttitudeControl& attitude_control); /// provide pointer to terrain database void set_terrain(AP_Terrain* terrain_ptr) { _terrain = terrain_ptr; } /// provide rangefinder altitude void set_rangefinder_alt(bool use, bool healthy, float alt_cm) { _rangefinder_available = use; _rangefinder_healthy = healthy; _rangefinder_alt_cm = alt_cm; } // return true if range finder may be used for terrain following bool rangefinder_used() const { return _rangefinder_use; } bool rangefinder_used_and_healthy() const { return _rangefinder_use && _rangefinder_healthy; } // get expected source of terrain data if alt-above-terrain command is executed (used by Copter's ModeRTL) enum class TerrainSource { TERRAIN_UNAVAILABLE, TERRAIN_FROM_RANGEFINDER, TERRAIN_FROM_TERRAINDATABASE, }; AC_WPNav::TerrainSource get_terrain_source() const; /// /// waypoint controller /// /// wp_and_spline_init - initialise straight line and spline waypoint controllers /// speed_cms is the desired max speed to travel between waypoints. should be a positive value or omitted to use the default speed /// updates target roll, pitch targets and I terms based on vehicle lean angles /// should be called once before the waypoint controller is used but does not need to be called before subsequent updates to destination void wp_and_spline_init(float speed_cms = 0.0f); /// set current target horizontal speed during wp navigation void set_speed_xy(float speed_cms); /// set current target climb or descent rate during wp navigation void set_speed_up(float speed_up_cms); void set_speed_down(float speed_down_cms); /// get default target horizontal velocity during wp navigation float get_default_speed_xy() const { return _wp_speed_cms; } /// get default target climb speed in cm/s during missions float get_default_speed_up() const { return _wp_speed_up_cms; } /// get default target descent rate in cm/s during missions. Note: always positive float get_default_speed_down() const { return _wp_speed_down_cms; } /// get_speed_z - returns target descent speed in cm/s during missions. Note: always positive float get_accel_z() const { return _wp_accel_z_cmss; } /// get_wp_acceleration - returns acceleration in cm/s/s during missions float get_wp_acceleration() const { return _wp_accel_cmss.get(); } /// get_wp_destination waypoint using position vector /// x,y are distance from ekf origin in cm /// z may be cm above ekf origin or terrain (see origin_and_destination_are_terrain_alt method) const Vector3f &get_wp_destination() const { return _destination; } /// get origin using position vector (distance from ekf origin in cm) const Vector3f &get_wp_origin() const { return _origin; } /// true if origin.z and destination.z are alt-above-terrain, false if alt-above-ekf-origin bool origin_and_destination_are_terrain_alt() const { return _terrain_alt; } /// set_wp_destination waypoint using location class /// provide the next_destination if known /// returns false if conversion from location to vector from ekf origin cannot be calculated bool set_wp_destination_loc(const Location& destination); bool set_wp_destination_next_loc(const Location& destination); // get destination as a location. Altitude frame will be absolute (AMSL) or above terrain // returns false if unable to return a destination (for example if origin has not yet been set) bool get_wp_destination_loc(Location& destination) const; // returns object avoidance adjusted destination which is always the same as get_wp_destination // having this function unifies the AC_WPNav_OA and AC_WPNav interfaces making vehicle code simpler virtual bool get_oa_wp_destination(Location& destination) const { return get_wp_destination_loc(destination); } /// set_wp_destination waypoint using position vector (distance from ekf origin in cm) /// terrain_alt should be true if destination.z is a desired altitude above terrain virtual bool set_wp_destination(const Vector3f& destination, bool terrain_alt = false); bool set_wp_destination_next(const Vector3f& destination, bool terrain_alt = false); /// set waypoint destination using NED position vector from ekf origin in meters /// provide next_destination_NED if known bool set_wp_destination_NED(const Vector3f& destination_NED); bool set_wp_destination_next_NED(const Vector3f& destination_NED); /// shifts the origin and destination horizontally to the current position /// used to reset the track when taking off without horizontal position control /// relies on set_wp_destination or set_wp_origin_and_destination having been called first void shift_wp_origin_and_destination_to_current_pos_xy(); /// shifts the origin and destination horizontally to the achievable stopping point /// used to reset the track when horizontal navigation is enabled after having been disabled (see Copter's wp_navalt_min) /// relies on set_wp_destination or set_wp_origin_and_destination having been called first void shift_wp_origin_and_destination_to_stopping_point_xy(); /// get_wp_stopping_point_xy - calculates stopping point based on current position, velocity, waypoint acceleration /// results placed in stopping_position vector void get_wp_stopping_point_xy(Vector2f& stopping_point) const; void get_wp_stopping_point(Vector3f& stopping_point) const; /// get_wp_distance_to_destination - get horizontal distance to destination in cm virtual float get_wp_distance_to_destination() const; /// get_bearing_to_destination - get bearing to next waypoint in centi-degrees virtual int32_t get_wp_bearing_to_destination() const; /// reached_destination - true when we have come within RADIUS cm of the waypoint virtual bool reached_wp_destination() const { return _flags.reached_destination; } // reached_wp_destination_xy - true if within RADIUS_CM of waypoint in x/y bool reached_wp_destination_xy() const { return get_wp_distance_to_destination() < _wp_radius_cm; } /// update_wpnav - run the wp controller - should be called at 100hz or higher virtual bool update_wpnav(); // returns true if update_wpnav has been run very recently bool is_active() const; /// /// spline methods /// /// set_spline_destination waypoint using location class /// returns false if conversion from location to vector from ekf origin cannot be calculated /// next_destination should be the next segment's destination /// next_is_spline should be true if next_destination is a spline segment bool set_spline_destination_loc(const Location& destination, const Location& next_destination, bool next_is_spline); /// set next destination (e.g. the one after the current destination) as a spline segment specified as a location /// returns false if conversion from location to vector from ekf origin cannot be calculated /// next_next_destination should be the next segment's destination /// next_next_is_spline should be true if next_next_destination is a spline segment bool set_spline_destination_next_loc(const Location& next_destination, const Location& next_next_destination, bool next_next_is_spline); /// set_spline_destination waypoint using position vector (distance from ekf origin in cm) /// terrain_alt should be true if destination.z is a desired altitude above terrain (false if its desired altitudes above ekf origin) /// next_destination is the next segment's destination /// next_terrain_alt should be true if next_destination.z is a desired altitude above terrain (false if its desired altitudes above ekf origin) /// next_destination.z must be in the same "frame" as destination.z (i.e. if destination is a alt-above-terrain, next_destination must be too) /// next_is_spline should be true if next_destination is a spline segment bool set_spline_destination(const Vector3f& destination, bool terrain_alt, const Vector3f& next_destination, bool next_terrain_alt, bool next_is_spline); /// set next destination (e.g. the one after the current destination) as an offset (in cm, NEU frame) from the EKF origin /// next_terrain_alt should be true if next_destination.z is a desired altitude above terrain (false if its desired altitudes above ekf origin) /// next_next_destination is the next segment's destination /// next_next_terrain_alt should be true if next_next_destination.z is a desired altitude above terrain (false if it is desired altitude above ekf origin) /// next_next_destination.z must be in the same "frame" as destination.z (i.e. if next_destination is a alt-above-terrain, next_next_destination must be too) /// next_next_is_spline should be true if next_next_destination is a spline segment bool set_spline_destination_next(const Vector3f& next_destination, bool next_terrain_alt, const Vector3f& next_next_destination, bool next_next_terrain_alt, bool next_next_is_spline); /// /// shared methods /// /// get desired roll, pitch which should be fed into stabilize controllers float get_roll() const { return _pos_control.get_roll_cd(); } float get_pitch() const { return _pos_control.get_pitch_cd(); } Vector3f get_thrust_vector() const { return _pos_control.get_thrust_vector(); } // get target yaw in centi-degrees float get_yaw() const { return _pos_control.get_yaw_cd(); } float get_yaw_rate_cds() const { return _pos_control.get_yaw_rate_cds(); } /// advance_wp_target_along_track - move target location along track from origin to destination bool advance_wp_target_along_track(float dt); /// recalculate path with update speed and/or acceleration limits void update_track_with_speed_accel_limits(); /// return the crosstrack_error - horizontal error of the actual position vs the desired position float crosstrack_error() const { return _track_error_xy;} static const struct AP_Param::GroupInfo var_info[]; protected: // flags structure struct wpnav_flags { uint8_t reached_destination : 1; // true if we have reached the destination uint8_t fast_waypoint : 1; // true if we should ignore the waypoint radius and consider the waypoint complete once the intermediate target has reached the waypoint uint8_t wp_yaw_set : 1; // true if yaw target has been set } _flags; // get terrain's altitude (in cm above the ekf origin) at the current position (+ve means terrain below vehicle is above ekf origin's altitude) bool get_terrain_offset(float& offset_cm); // convert location to vector from ekf origin. terrain_alt is set to true if resulting vector's z-axis should be treated as alt-above-terrain // returns false if conversion failed (likely because terrain data was not available) bool get_vector_NEU(const Location &loc, Vector3f &vec, bool &terrain_alt); // helper function to calculate scurve jerk and jerk_time values // updates _scurve_jerk and _scurve_jerk_time void calc_scurve_jerk_and_jerk_time(); // references and pointers to external libraries const AP_InertialNav& _inav; const AP_AHRS_View& _ahrs; AC_PosControl& _pos_control; const AC_AttitudeControl& _attitude_control; AP_Terrain *_terrain; // parameters AP_Float _wp_speed_cms; // default maximum horizontal speed in cm/s during missions AP_Float _wp_speed_up_cms; // default maximum climb rate in cm/s AP_Float _wp_speed_down_cms; // default maximum descent rate in cm/s AP_Float _wp_radius_cm; // distance from a waypoint in cm that, when crossed, indicates the wp has been reached AP_Float _wp_accel_cmss; // horizontal acceleration in cm/s/s during missions AP_Float _wp_accel_z_cmss; // vertical acceleration in cm/s/s during missions AP_Float _wp_jerk; // maximum jerk used to generate scurve trajectories in m/s/s/s // scurve SCurve _scurve_prev_leg; // previous scurve trajectory used to blend with current scurve trajectory SCurve _scurve_this_leg; // current scurve trajectory SCurve _scurve_next_leg; // next scurve trajectory used to blend with current scurve trajectory float _scurve_jerk; // scurve jerk max in m/s/s/s float _scurve_jerk_time; // scurve jerk time (time in seconds for jerk to increase from zero _scurve_jerk) // spline curves SplineCurve _spline_this_leg; // spline curve for current segment SplineCurve _spline_next_leg; // spline curve for next segment // the type of this leg bool _this_leg_is_spline; // true if this leg is a spline bool _next_leg_is_spline; // true if the next leg is a spline // waypoint controller internal variables uint32_t _wp_last_update; // time of last update_wpnav call float _wp_desired_speed_xy_cms; // desired wp speed in cm/sec Vector3f _origin; // starting point of trip to next waypoint in cm from ekf origin Vector3f _destination; // target destination in cm from ekf origin float _track_error_xy; // horizontal error of the actual position vs the desired position float _track_scalar_dt; // time compression multiplier to slow the progress along the track // terrain following variables bool _terrain_alt; // true if origin and destination.z are alt-above-terrain, false if alt-above-ekf-origin bool _rangefinder_available; // true if rangefinder is enabled (user switch can turn this true/false) AP_Int8 _rangefinder_use; // parameter that specifies if the range finder should be used for terrain following commands bool _rangefinder_healthy; // true if rangefinder distance is healthy (i.e. between min and maximum) float _rangefinder_alt_cm; // latest distance from the rangefinder // position, velocity and acceleration targets passed to position controller postype_t _pos_terrain_offset; float _vel_terrain_offset; float _accel_terrain_offset; };