# hw definition file f405 Matek CAN GPS

# MCU class and specific type
MCU STM32F4xx STM32F405xx

# crystal frequency
OSCILLATOR_HZ 8000000

# board ID for firmware load
APJ_BOARD_ID 1014

# setup build for a peripheral firmware
env AP_PERIPH 1

FLASH_RESERVE_START_KB 0
FLASH_SIZE_KB 1024
FLASH_BOOTLOADER_LOAD_KB 64

PA14 LED_BOOTLOADER OUTPUT LOW GPIO(0)  # blue
define HAL_LED_ON 0

# order of UARTs
SERIAL_ORDER OTG1

PA9  USART1_TX USART1
PA10 USART1_RX USART1

PA2 USART2_TX USART2
PA3 USART2_RX USART2

PC10  USART3_TX USART3
PC11  USART3_RX USART3

PA0 UART4_TX UART4
PA1 UART4_RX UART4

PC12 UART5_TX UART5
PD2  UART5_RX UART5

PA11 OTG_FS_DM OTG1
PA12 OTG_FS_DP OTG1

# enable CAN support
PB8 CAN1_RX CAN1
PB9 CAN1_TX CAN1
PC13 GPIO_CAN1_SILENT OUTPUT PUSHPULL SPEED_LOW LOW

define HAL_USE_CAN TRUE
define STM32_CAN_USE_CAN1 TRUE

define CAN_APP_NODE_NAME "org.ardupilot.f405_MatekGPS"


# Add CS pins to ensure they are high in bootloader
PA4 MPU_CS CS
PB12  MAG_CS CS
PC14 SDCARD_CS CS