/// @file AP_Mission.cpp /// @brief Handles the MAVLINK command mission stack. Reads and writes mission to storage. #include "AP_Mission.h" #include #include #include #include #include const AP_Param::GroupInfo AP_Mission::var_info[] = { // @Param: TOTAL // @DisplayName: Total mission commands // @Description: The number of mission mission items that has been loaded by the ground station. Do not change this manually. // @Range: 0 32766 // @Increment: 1 // @User: Advanced // @ReadOnly: True AP_GROUPINFO_FLAGS("TOTAL", 0, AP_Mission, _cmd_total, 0, AP_PARAM_FLAG_INTERNAL_USE_ONLY), // @Param: RESTART // @DisplayName: Mission Restart when entering Auto mode // @Description: Controls mission starting point when entering Auto mode (either restart from beginning of mission or resume from last command run) // @Values: 0:Resume Mission, 1:Restart Mission // @User: Advanced AP_GROUPINFO("RESTART", 1, AP_Mission, _restart, AP_MISSION_RESTART_DEFAULT), // @Param: OPTIONS // @DisplayName: Mission options bitmask // @Description: Bitmask of what options to use in missions. // @Bitmask: 0:Clear Mission on reboot, 1:Use distance to land calc on battery failsafe,2:ContinueAfterLand // @Bitmask{Copter}: 0:Clear Mission on reboot, 2:ContinueAfterLand // @Bitmask{Rover, Sub}: 0:Clear Mission on reboot // @User: Advanced AP_GROUPINFO("OPTIONS", 2, AP_Mission, _options, AP_MISSION_OPTIONS_DEFAULT), AP_GROUPEND }; extern const AP_HAL::HAL& hal; // storage object StorageAccess AP_Mission::_storage(StorageManager::StorageMission); HAL_Semaphore AP_Mission::_rsem; /// /// public mission methods /// /// init - initialises this library including checks the version in eeprom matches this library void AP_Mission::init() { // check_eeprom_version - checks version of missions stored in eeprom matches this library // command list will be cleared if they do not match check_eeprom_version(); // initialize the jump tracking array init_jump_tracking(); // If Mission Clear bit is set then it should clear the mission, otherwise retain the mission. if (AP_MISSION_MASK_MISSION_CLEAR & _options) { gcs().send_text(MAV_SEVERITY_INFO, "Clearing Mission"); clear(); } _last_change_time_ms = AP_HAL::millis(); } /// start - resets current commands to point to the beginning of the mission /// To-Do: should we validate the mission first and return true/false? void AP_Mission::start() { _flags.state = MISSION_RUNNING; reset(); // reset mission to the first command, resets jump tracking // advance to the first command if (!advance_current_nav_cmd()) { // on failure set mission complete complete(); } } /// stop - stops mission execution. subsequent calls to update() will have no effect until the mission is started or resumed void AP_Mission::stop() { _flags.state = MISSION_STOPPED; } /// resume - continues the mission execution from where we last left off /// previous running commands will be re-initialized void AP_Mission::resume() { // if mission had completed then start it from the first command if (_flags.state == MISSION_COMPLETE) { start(); return; } // if mission had stopped then restart it if (_flags.state == MISSION_STOPPED) { _flags.state = MISSION_RUNNING; // if no valid nav command index restart from beginning if (_nav_cmd.index == AP_MISSION_CMD_INDEX_NONE) { start(); return; } } // ensure cache coherence if (!read_cmd_from_storage(_nav_cmd.index, _nav_cmd)) { // if we failed to read the command from storage, then the command may have // been from a previously loaded mission it is illogical to ever resume // flying to a command that has been excluded from the current mission start(); return; } // rewind the mission wp if the repeat distance has been set via MAV_CMD_DO_SET_RESUME_REPEAT_DIST if (_repeat_dist > 0 && _wp_index_history[LAST_WP_PASSED] != AP_MISSION_CMD_INDEX_NONE) { // if not already in a resume state calculate the position to rewind to Mission_Command tmp_cmd; if (!_flags.resuming_mission && calc_rewind_pos(tmp_cmd)) { _resume_cmd = tmp_cmd; } // resume mission to rewound position if (_resume_cmd.index != AP_MISSION_CMD_INDEX_NONE && start_command(_resume_cmd)) { _nav_cmd = _resume_cmd; _flags.nav_cmd_loaded = true; // set flag to prevent history being re-written _flags.resuming_mission = true; return; } } // restart active navigation command. We run these on resume() // regardless of whether the mission was stopped, as we may be // re-entering AUTO mode and the nav_cmd callback needs to be run // to setup the current target waypoint if (_flags.do_cmd_loaded && _do_cmd.index != AP_MISSION_CMD_INDEX_NONE) { // restart the active do command, which will also load the nav command for us set_current_cmd(_do_cmd.index); } else if (_flags.nav_cmd_loaded) { // restart the active nav command set_current_cmd(_nav_cmd.index); } // Note: if there is no active command then the mission must have been stopped just after the previous nav command completed // update will take care of finding and starting the nav command } /// check if the next nav command is a takeoff, skipping delays bool AP_Mission::is_takeoff_next(uint16_t cmd_index) { Mission_Command cmd = {}; // check a maximum of 16 items, remembering that missions can have // loops in them for (uint8_t i=0; i<16; i++, cmd_index++) { if (!get_next_nav_cmd(cmd_index, cmd)) { return false; } switch (cmd.id) { // any of these are considered a takeoff command: case MAV_CMD_NAV_VTOL_TAKEOFF: case MAV_CMD_NAV_TAKEOFF: case MAV_CMD_NAV_TAKEOFF_LOCAL: return true; // any of these are considered "skippable" when determining if // we "start with a takeoff command" case MAV_CMD_DO_AUX_FUNCTION: case MAV_CMD_NAV_DELAY: continue; default: return false; } } return false; } /// check mission starts with a takeoff command bool AP_Mission::starts_with_takeoff_cmd() { uint16_t cmd_index = _restart ? AP_MISSION_CMD_INDEX_NONE : _nav_cmd.index; if (cmd_index == AP_MISSION_CMD_INDEX_NONE) { cmd_index = AP_MISSION_FIRST_REAL_COMMAND; } return is_takeoff_next(cmd_index); } /* return true if MIS_OPTIONS is set to allow continue of mission logic after a land and the next waypoint is a takeoff. If this is false then after a landing is complete the vehicle should disarm and mission logic should stop */ bool AP_Mission::continue_after_land_check_for_takeoff() { if (!continue_after_land()) { return false; } if (_nav_cmd.index == AP_MISSION_CMD_INDEX_NONE) { return false; } return is_takeoff_next(_nav_cmd.index+1); } /// start_or_resume - if MIS_AUTORESTART=0 this will call resume(), otherwise it will call start() void AP_Mission::start_or_resume() { if (_restart == 1 && !_force_resume) { start(); } else { resume(); _force_resume = false; } } /// reset - reset mission to the first command void AP_Mission::reset() { _flags.nav_cmd_loaded = false; _flags.do_cmd_loaded = false; _flags.do_cmd_all_done = false; _flags.in_landing_sequence = false; _nav_cmd.index = AP_MISSION_CMD_INDEX_NONE; _do_cmd.index = AP_MISSION_CMD_INDEX_NONE; _prev_nav_cmd_index = AP_MISSION_CMD_INDEX_NONE; _prev_nav_cmd_wp_index = AP_MISSION_CMD_INDEX_NONE; _prev_nav_cmd_id = AP_MISSION_CMD_ID_NONE; init_jump_tracking(); reset_wp_history(); } /// clear - clears out mission /// returns true if mission was running so it could not be cleared bool AP_Mission::clear() { // do not allow clearing the mission while it is running if (_flags.state == MISSION_RUNNING) { return false; } // remove all commands truncate(0); // clear index to commands _nav_cmd.index = AP_MISSION_CMD_INDEX_NONE; _do_cmd.index = AP_MISSION_CMD_INDEX_NONE; _flags.nav_cmd_loaded = false; _flags.do_cmd_loaded = false; // return success return true; } /// trucate - truncate any mission items beyond index void AP_Mission::truncate(uint16_t index) { if ((unsigned)_cmd_total > index) { _cmd_total.set_and_save(index); _last_change_time_ms = AP_HAL::millis(); } } /// update - ensures the command queues are loaded with the next command and calls main programs command_init and command_verify functions to progress the mission /// should be called at 10hz or higher void AP_Mission::update() { // exit immediately if not running or no mission commands if (_flags.state != MISSION_RUNNING || _cmd_total == 0) { return; } update_exit_position(); // save persistent waypoint_num for watchdog restore hal.util->persistent_data.waypoint_num = _nav_cmd.index; // check if we have an active nav command if (!_flags.nav_cmd_loaded || _nav_cmd.index == AP_MISSION_CMD_INDEX_NONE) { // advance in mission if no active nav command if (!advance_current_nav_cmd()) { // failure to advance nav command means mission has completed complete(); return; } } else { // run the active nav command if (verify_command(_nav_cmd)) { // market _nav_cmd as complete (it will be started on the next iteration) _flags.nav_cmd_loaded = false; // immediately advance to the next mission command if (!advance_current_nav_cmd()) { // failure to advance nav command means mission has completed complete(); return; } } } // check if we have an active do command if (!_flags.do_cmd_loaded) { advance_current_do_cmd(); } else { // check the active do command if (verify_command(_do_cmd)) { // mark _do_cmd as complete _flags.do_cmd_loaded = false; } } } bool AP_Mission::verify_command(const Mission_Command& cmd) { switch (cmd.id) { // do-commands always return true for verify: #if AP_GRIPPER_ENABLED case MAV_CMD_DO_GRIPPER: #endif case MAV_CMD_DO_SET_SERVO: case MAV_CMD_DO_SET_RELAY: case MAV_CMD_DO_REPEAT_SERVO: case MAV_CMD_DO_REPEAT_RELAY: case MAV_CMD_DO_DIGICAM_CONFIGURE: case MAV_CMD_DO_DIGICAM_CONTROL: case MAV_CMD_DO_SET_CAM_TRIGG_DIST: case MAV_CMD_DO_PARACHUTE: case MAV_CMD_DO_SEND_SCRIPT_MESSAGE: case MAV_CMD_DO_SPRAYER: case MAV_CMD_DO_AUX_FUNCTION: case MAV_CMD_DO_SET_RESUME_REPEAT_DIST: case MAV_CMD_DO_GIMBAL_MANAGER_PITCHYAW: return true; default: return _cmd_verify_fn(cmd); } } bool AP_Mission::start_command(const Mission_Command& cmd) { // check for landing related commands and set in_landing_sequence flag if (is_landing_type_cmd(cmd.id) || cmd.id == MAV_CMD_DO_LAND_START) { set_in_landing_sequence_flag(true); } else if (is_takeoff_type_cmd(cmd.id)) { set_in_landing_sequence_flag(false); } gcs().send_text(MAV_SEVERITY_INFO, "Mission: %u %s", cmd.index, cmd.type()); switch (cmd.id) { case MAV_CMD_DO_AUX_FUNCTION: return start_command_do_aux_function(cmd); #if AP_GRIPPER_ENABLED case MAV_CMD_DO_GRIPPER: return start_command_do_gripper(cmd); #endif case MAV_CMD_DO_SET_SERVO: case MAV_CMD_DO_SET_RELAY: case MAV_CMD_DO_REPEAT_SERVO: case MAV_CMD_DO_REPEAT_RELAY: return start_command_do_servorelayevents(cmd); case MAV_CMD_DO_CONTROL_VIDEO: case MAV_CMD_DO_DIGICAM_CONFIGURE: case MAV_CMD_DO_DIGICAM_CONTROL: #if AP_CAMERA_ENABLED case MAV_CMD_DO_SET_CAM_TRIGG_DIST: return start_command_camera(cmd); #endif case MAV_CMD_DO_PARACHUTE: return start_command_parachute(cmd); case MAV_CMD_DO_SEND_SCRIPT_MESSAGE: return start_command_do_scripting(cmd); case MAV_CMD_DO_SPRAYER: return start_command_do_sprayer(cmd); case MAV_CMD_DO_SET_RESUME_REPEAT_DIST: return command_do_set_repeat_dist(cmd); case MAV_CMD_DO_GIMBAL_MANAGER_PITCHYAW: return start_command_do_gimbal_manager_pitchyaw(cmd); default: return _cmd_start_fn(cmd); } } /// /// public command methods /// /// add_cmd - adds a command to the end of the command list and writes to storage /// returns true if successfully added, false on failure /// cmd.index is updated with it's new position in the mission bool AP_Mission::add_cmd(Mission_Command& cmd) { // attempt to write the command to storage bool ret = write_cmd_to_storage(_cmd_total, cmd); if (ret) { // update command's index cmd.index = _cmd_total; // increment total number of commands _cmd_total.set_and_save(_cmd_total + 1); } return ret; } /// replace_cmd - replaces the command at position 'index' in the command list with the provided cmd /// replacing the current active command will have no effect until the command is restarted /// returns true if successfully replaced, false on failure bool AP_Mission::replace_cmd(uint16_t index, const Mission_Command& cmd) { // sanity check index if (index >= (unsigned)_cmd_total) { return false; } // attempt to write the command to storage return write_cmd_to_storage(index, cmd); } /// is_nav_cmd - returns true if the command's id is a "navigation" command, false if "do" or "conditional" command bool AP_Mission::is_nav_cmd(const Mission_Command& cmd) { // NAV commands all have ids below MAV_CMD_NAV_LAST, plus some exceptions return (cmd.id <= MAV_CMD_NAV_LAST || cmd.id == MAV_CMD_NAV_SET_YAW_SPEED || cmd.id == MAV_CMD_NAV_SCRIPT_TIME || cmd.id == MAV_CMD_NAV_ATTITUDE_TIME); } /// get_next_nav_cmd - gets next "navigation" command found at or after start_index /// returns true if found, false if not found (i.e. reached end of mission command list) /// accounts for do_jump commands but never increments the jump's num_times_run (advance_current_nav_cmd is responsible for this) bool AP_Mission::get_next_nav_cmd(uint16_t start_index, Mission_Command& cmd) { // search until the end of the mission command list for (uint16_t cmd_index = start_index; cmd_index < (unsigned)_cmd_total; cmd_index++) { // get next command if (!get_next_cmd(cmd_index, cmd, false)) { // no more commands so return failure return false; } // if found a "navigation" command then return it if (is_nav_cmd(cmd)) { return true; } } // if we got this far we did not find a navigation command return false; } /// get the ground course of the next navigation leg in centidegrees /// from 0 36000. Return default_angle if next navigation /// leg cannot be determined int32_t AP_Mission::get_next_ground_course_cd(int32_t default_angle) { Mission_Command cmd; if (!get_next_nav_cmd(_nav_cmd.index+1, cmd)) { return default_angle; } // special handling for nav commands with no target location if (cmd.id == MAV_CMD_NAV_GUIDED_ENABLE || cmd.id == MAV_CMD_NAV_DELAY) { return default_angle; } if (cmd.id == MAV_CMD_NAV_SET_YAW_SPEED) { return (_nav_cmd.content.set_yaw_speed.angle_deg * 100); } return _nav_cmd.content.location.get_bearing_to(cmd.content.location); } // set_current_cmd - jumps to command specified by index bool AP_Mission::set_current_cmd(uint16_t index, bool rewind) { // read command to check for DO_LAND_START Mission_Command cmd; if (!read_cmd_from_storage(index, cmd) || (cmd.id != MAV_CMD_DO_LAND_START)) { _flags.in_landing_sequence = false; } // mission command has been set and not as rewind command, don't track history. if (!rewind) { reset_wp_history(); } // sanity check index and that we have a mission if (index >= (unsigned)_cmd_total || _cmd_total == 1) { return false; } // stop the current running do command _do_cmd.index = AP_MISSION_CMD_INDEX_NONE; _flags.do_cmd_loaded = false; _flags.do_cmd_all_done = false; // stop current nav cmd _flags.nav_cmd_loaded = false; // if index is zero then the user wants to completely restart the mission if (index == 0 || _flags.state == MISSION_COMPLETE) { _prev_nav_cmd_id = AP_MISSION_CMD_ID_NONE; _prev_nav_cmd_index = AP_MISSION_CMD_INDEX_NONE; _prev_nav_cmd_wp_index = AP_MISSION_CMD_INDEX_NONE; // reset the jump tracking to zero init_jump_tracking(); if (index == 0) { index = 1; } } // if the mission is stopped or completed move the nav_cmd index to the specified point and set the state to stopped // so that if the user resumes the mission it will begin at the specified index if (_flags.state != MISSION_RUNNING) { // search until we find next nav command or reach end of command list while (!_flags.nav_cmd_loaded) { // get next command if (!get_next_cmd(index, cmd, true)) { _nav_cmd.index = AP_MISSION_CMD_INDEX_NONE; return false; } // check if navigation or "do" command if (is_nav_cmd(cmd)) { // set current navigation command _nav_cmd = cmd; _flags.nav_cmd_loaded = true; } else { // set current do command if (!_flags.do_cmd_loaded) { _do_cmd = cmd; _flags.do_cmd_loaded = true; } } // move onto next command index = cmd.index+1; } // if we have not found a do command then set flag to show there are no do-commands to be run before nav command completes if (!_flags.do_cmd_loaded) { _flags.do_cmd_all_done = true; } // if we got this far then the mission can safely be "resumed" from the specified index so we set the state to "stopped" _flags.state = MISSION_STOPPED; return true; } // the state must be MISSION_RUNNING, allow advance_current_nav_cmd() to manage starting the item if (!advance_current_nav_cmd(index)) { // on failure set mission complete complete(); return false; } // if we got this far we must have successfully advanced the nav command return true; } // restart current navigation command. Used to handle external changes to mission // returns true on success, false if mission is not running or current nav command is invalid bool AP_Mission::restart_current_nav_cmd() { // return immediately if mission is not running if (_flags.state != MISSION_RUNNING) { return false; } // return immediately if nav command index is invalid const uint16_t nav_cmd_index = get_current_nav_index(); if ((nav_cmd_index == 0) || (nav_cmd_index >= num_commands())) { return false; } return set_current_cmd(_nav_cmd.index); } // returns false on any issue at all. bool AP_Mission::set_item(uint16_t index, mavlink_mission_item_int_t& src_packet) { // this is the on-storage format AP_Mission::Mission_Command cmd; // can't handle request for anything bigger than the mission size+1... if (index > num_commands()) { return false; } // convert from mavlink-ish format to storage format, if we can. if (mavlink_int_to_mission_cmd(src_packet, cmd) != MAV_MISSION_ACCEPTED) { return false; } // A request to set the 'next' item after the end is how we add an extra // item to the list, thus allowing us to write entire missions if needed. if (index == num_commands()) { return add_cmd(cmd); } // replacing an existing mission item... return AP_Mission::replace_cmd(index, cmd); } bool AP_Mission::get_item(uint16_t index, mavlink_mission_item_int_t& ret_packet) const { // setting ret_packet.command = -1 and/or returning false // means it contains invalid data after it leaves here. // this is the on-storage format AP_Mission::Mission_Command cmd; // can't handle request for anything bigger than the mission size... if (index >= num_commands()) { ret_packet.command = -1; return false; } // minimal placeholder values during read-from-storage ret_packet.target_system = 1; // unused sysid ret_packet.target_component = 1; // unused compid // 0=home, higher number/s = mission item number. ret_packet.seq = index; // retrieve mission from eeprom if (!read_cmd_from_storage(ret_packet.seq, cmd)) { ret_packet.command = -1; return false; } // convert into mavlink-ish format for lua and friends. if (!mission_cmd_to_mavlink_int(cmd, ret_packet)) { ret_packet.command = -1; return false; } // set packet's current field to 1 if this is the command being executed if (cmd.id == (uint16_t)get_current_nav_cmd().index) { ret_packet.current = 1; } else { ret_packet.current = 0; } // set auto continue to 1, becasue that's what's done elsewhere. ret_packet.autocontinue = 1; // 1 (true), 0 (false) ret_packet.command = cmd.id; return true; } struct PACKED Packed_Location_Option_Flags { uint8_t relative_alt : 1; // 1 if altitude is relative to home uint8_t unused1 : 1; // unused flag (defined so that loiter_ccw uses the correct bit) uint8_t loiter_ccw : 1; // 0 if clockwise, 1 if counter clockwise uint8_t terrain_alt : 1; // this altitude is above terrain uint8_t origin_alt : 1; // this altitude is above ekf origin uint8_t loiter_xtrack : 1; // 0 to crosstrack from center of waypoint, 1 to crosstrack from tangent exit location uint8_t type_specific_bit_0 : 1; // each mission item type can use this for storing 1 bit of extra data }; struct PACKED PackedLocation { union { Packed_Location_Option_Flags flags; ///< options bitmask (1<<0 = relative altitude) uint8_t options; /// allows writing all flags to eeprom as one byte }; // by making alt 24 bit we can make p1 in a command 16 bit, // allowing an accurate angle in centi-degrees. This keeps the // storage cost per mission item at 15 bytes, and allows mission // altitudes of up to +/- 83km int32_t alt:24; ///< param 2 - Altitude in centimeters (meters * 100) see LOCATION_ALT_MAX_M int32_t lat; ///< param 3 - Latitude * 10**7 int32_t lng; ///< param 4 - Longitude * 10**7 }; union PackedContent { // location PackedLocation location; // Waypoint location // raw bytes, for reading/writing to eeprom. Note that only 10 // bytes are available if a 16 bit command ID is used uint8_t bytes[12]; }; assert_storage_size assert_storage_size_PackedContent; /// load_cmd_from_storage - load command from storage /// true is return if successful bool AP_Mission::read_cmd_from_storage(uint16_t index, Mission_Command& cmd) const { WITH_SEMAPHORE(_rsem); // special handling for command #0 which is home if (index == 0) { cmd = {}; cmd.id = MAV_CMD_NAV_WAYPOINT; cmd.content.location = AP::ahrs().get_home(); return true; } if (index >= (unsigned)_cmd_total) { return false; } // ensure all bytes of cmd are zeroed cmd = {}; // Find out proper location in memory by using the start_byte position + the index // we can load a command, we don't process it yet // read WP position const uint16_t pos_in_storage = 4 + (index * AP_MISSION_EEPROM_COMMAND_SIZE); PackedContent packed_content {}; const uint8_t b1 = _storage.read_byte(pos_in_storage); if (b1 == 0) { cmd.id = _storage.read_uint16(pos_in_storage+1); cmd.p1 = _storage.read_uint16(pos_in_storage+3); _storage.read_block(packed_content.bytes, pos_in_storage+5, 10); } else { cmd.id = b1; cmd.p1 = _storage.read_uint16(pos_in_storage+1); _storage.read_block(packed_content.bytes, pos_in_storage+3, 12); } if (stored_in_location(cmd.id)) { #if CONFIG_HAL_BOARD == HAL_BOARD_SITL // NOTE! no 16-bit command may be stored_in_location as only // 10 bytes are available for storage and lat/lon/alt required // 4*sizeof(float) == 12 bytes of storage. if (b1 == 0) { AP_HAL::panic("May not store location for 16-bit commands"); } #endif // Location is not PACKED; field-wise copy it: cmd.content.location.relative_alt = packed_content.location.flags.relative_alt; cmd.content.location.loiter_ccw = packed_content.location.flags.loiter_ccw; cmd.content.location.terrain_alt = packed_content.location.flags.terrain_alt; cmd.content.location.origin_alt = packed_content.location.flags.origin_alt; cmd.content.location.loiter_xtrack = packed_content.location.flags.loiter_xtrack; cmd.content.location.alt = packed_content.location.alt; cmd.content.location.lat = packed_content.location.lat; cmd.content.location.lng = packed_content.location.lng; if (packed_content.location.flags.type_specific_bit_0) { cmd.type_specific_bits = 1U << 0; } } else { // all other options in Content are assumed to be packed: static_assert(sizeof(cmd.content) >= 12, "content is big enough to take bytes"); // (void *) cast to specify gcc that we know that we are copy byte into a non trivial type and leaving 4 bytes untouched memcpy((void *)&cmd.content, packed_content.bytes, 12); } // set command's index to it's position in eeprom cmd.index = index; // return success return true; } bool AP_Mission::stored_in_location(uint16_t id) { switch (id) { case MAV_CMD_NAV_WAYPOINT: case MAV_CMD_NAV_LOITER_UNLIM: case MAV_CMD_NAV_LOITER_TURNS: case MAV_CMD_NAV_LOITER_TIME: case MAV_CMD_NAV_LAND: case MAV_CMD_NAV_TAKEOFF: case MAV_CMD_NAV_CONTINUE_AND_CHANGE_ALT: case MAV_CMD_NAV_LOITER_TO_ALT: case MAV_CMD_NAV_SPLINE_WAYPOINT: case MAV_CMD_NAV_GUIDED_ENABLE: case MAV_CMD_DO_SET_HOME: case MAV_CMD_DO_LAND_START: case MAV_CMD_DO_GO_AROUND: case MAV_CMD_DO_SET_ROI: case MAV_CMD_NAV_VTOL_TAKEOFF: case MAV_CMD_NAV_VTOL_LAND: case MAV_CMD_NAV_PAYLOAD_PLACE: return true; default: return false; } } /// write_cmd_to_storage - write a command to storage /// index is used to calculate the storage location /// true is returned if successful bool AP_Mission::write_cmd_to_storage(uint16_t index, const Mission_Command& cmd) { WITH_SEMAPHORE(_rsem); // range check cmd's index if (index >= num_commands_max()) { return false; } PackedContent packed {}; if (stored_in_location(cmd.id)) { // Location is not PACKED; field-wise copy it: packed.location.flags.relative_alt = cmd.content.location.relative_alt; packed.location.flags.loiter_ccw = cmd.content.location.loiter_ccw; packed.location.flags.terrain_alt = cmd.content.location.terrain_alt; packed.location.flags.origin_alt = cmd.content.location.origin_alt; packed.location.flags.loiter_xtrack = cmd.content.location.loiter_xtrack; packed.location.flags.type_specific_bit_0 = cmd.type_specific_bits & (1U<<0); packed.location.alt = cmd.content.location.alt; packed.location.lat = cmd.content.location.lat; packed.location.lng = cmd.content.location.lng; } else { // all other options in Content are assumed to be packed: static_assert(sizeof(packed.bytes) >= 12, "packed.bytes is big enough to take content"); memcpy(packed.bytes, &cmd.content, 12); } // calculate where in storage the command should be placed uint16_t pos_in_storage = 4 + (index * AP_MISSION_EEPROM_COMMAND_SIZE); if (cmd.id < 256) { _storage.write_byte(pos_in_storage, cmd.id); _storage.write_uint16(pos_in_storage+1, cmd.p1); _storage.write_block(pos_in_storage+3, packed.bytes, 12); } else { // if the command ID is above 256 we store a 0 followed by the 16 bit command ID _storage.write_byte(pos_in_storage, 0); _storage.write_uint16(pos_in_storage+1, cmd.id); _storage.write_uint16(pos_in_storage+3, cmd.p1); _storage.write_block(pos_in_storage+5, packed.bytes, 10); } // remember when the mission last changed _last_change_time_ms = AP_HAL::millis(); // return success return true; } /// write_home_to_storage - writes the special purpose cmd 0 (home) to storage /// home is taken directly from ahrs void AP_Mission::write_home_to_storage() { Mission_Command home_cmd = {}; home_cmd.id = MAV_CMD_NAV_WAYPOINT; home_cmd.content.location = AP::ahrs().get_home(); write_cmd_to_storage(0,home_cmd); } MAV_MISSION_RESULT AP_Mission::sanity_check_params(const mavlink_mission_item_int_t& packet) { uint8_t nan_mask; switch (packet.command) { case MAV_CMD_NAV_WAYPOINT: nan_mask = ~(1 << 3); // param 4 can be nan break; case MAV_CMD_NAV_LAND: nan_mask = ~(1 << 3); // param 4 can be nan break; case MAV_CMD_NAV_TAKEOFF: nan_mask = ~(1 << 3); // param 4 can be nan break; case MAV_CMD_NAV_VTOL_TAKEOFF: nan_mask = ~(1 << 3); // param 4 can be nan break; case MAV_CMD_NAV_VTOL_LAND: nan_mask = ~((1 << 2) | (1 << 3)); // param 3 and 4 can be nan break; default: nan_mask = 0xff; break; } if (((nan_mask & (1 << 0)) && isnan(packet.param1)) || isinf(packet.param1)) { return MAV_MISSION_INVALID_PARAM1; } if (((nan_mask & (1 << 1)) && isnan(packet.param2)) || isinf(packet.param2)) { return MAV_MISSION_INVALID_PARAM2; } if (((nan_mask & (1 << 2)) && isnan(packet.param3)) || isinf(packet.param3)) { return MAV_MISSION_INVALID_PARAM3; } if (((nan_mask & (1 << 3)) && isnan(packet.param4)) || isinf(packet.param4)) { return MAV_MISSION_INVALID_PARAM4; } return MAV_MISSION_ACCEPTED; } // mavlink_int_to_mission_cmd - converts mavlink message to an AP_Mission::Mission_Command object which can be stored to eeprom // return MAV_MISSION_ACCEPTED on success, MAV_MISSION_RESULT error on failure MAV_MISSION_RESULT AP_Mission::mavlink_int_to_mission_cmd(const mavlink_mission_item_int_t& packet, AP_Mission::Mission_Command& cmd) { // command's position in mission list and mavlink id cmd.index = packet.seq; cmd.id = packet.command; cmd.content.location = {}; MAV_MISSION_RESULT param_check = sanity_check_params(packet); if (param_check != MAV_MISSION_ACCEPTED) { return param_check; } // command specific conversions from mavlink packet to mission command switch (cmd.id) { case 0: // this is reserved for storing 16 bit command IDs return MAV_MISSION_INVALID; case MAV_CMD_NAV_WAYPOINT: { // MAV ID: 16 /* the 15 byte limit means we can't fit both delay and radius in the cmd structure. When we expand the mission structure we can do this properly */ #if APM_BUILD_TYPE(APM_BUILD_ArduPlane) // acceptance radius in meters and pass by distance in meters uint16_t acp = packet.param2; // param 2 is acceptance radius in meters is held in low p1 uint16_t passby = packet.param3; // param 3 is pass by distance in meters is held in high p1 // limit to 255 so it does not wrap during the shift or mask operation passby = MIN(0xFF,passby); acp = MIN(0xFF,acp); cmd.p1 = (passby << 8) | (acp & 0x00FF); #else // delay at waypoint in seconds (this is for copters???) cmd.p1 = packet.param1; #endif } break; case MAV_CMD_NAV_LOITER_UNLIM: // MAV ID: 17 cmd.p1 = fabsf(packet.param3); // store radius as 16bit since no other params are competing for space cmd.content.location.loiter_ccw = (packet.param3 < 0); // -1 = counter clockwise, +1 = clockwise break; case MAV_CMD_NAV_LOITER_TURNS: { // MAV ID: 18 // number of turns is stored in the lowest bits. radii below // 255m are stored in the top 8 bits as an 8-bit integer. // Radii above 255m are stored divided by 10 and a bit set in // storage so that on retrieval they are multiplied by 10 cmd.p1 = MIN(255, packet.param1); // store number of times to circle in low p1 uint8_t radius_m; const float abs_radius = fabsf(packet.param3); if (abs_radius <= 255) { radius_m = abs_radius; } else { radius_m = MIN(255, abs_radius * 0.1); cmd.type_specific_bits = 1U << 0; } cmd.p1 |= (radius_m<<8); // store radius in high byte of p1 cmd.content.location.loiter_ccw = (packet.param3 < 0); cmd.content.location.loiter_xtrack = (packet.param4 > 0); // 0 to xtrack from center of waypoint, 1 to xtrack from tangent exit location } break; case MAV_CMD_NAV_LOITER_TIME: // MAV ID: 19 cmd.p1 = packet.param1; // loiter time in seconds uses all 16 bits, 8bit seconds is too small. No room for radius. cmd.content.location.loiter_ccw = (packet.param3 < 0); cmd.content.location.loiter_xtrack = (packet.param4 > 0); // 0 to xtrack from center of waypoint, 1 to xtrack from tangent exit location break; case MAV_CMD_NAV_RETURN_TO_LAUNCH: // MAV ID: 20 break; case MAV_CMD_NAV_LAND: // MAV ID: 21 cmd.p1 = packet.param1; // abort target altitude(m) (plane only) if (!isnan(packet.param4)) { cmd.content.location.loiter_ccw = is_negative(packet.param4); // yaw direction, (plane deepstall only) } break; case MAV_CMD_NAV_TAKEOFF: // MAV ID: 22 cmd.p1 = packet.param1; // minimum pitch (plane only) break; case MAV_CMD_NAV_CONTINUE_AND_CHANGE_ALT: // MAV ID: 30 cmd.p1 = packet.param1; // Climb/Descend // 0 = Neutral, cmd complete at +/- 5 of indicated alt. // 1 = Climb, cmd complete at or above indicated alt. // 2 = Descend, cmd complete at or below indicated alt. break; case MAV_CMD_NAV_LOITER_TO_ALT: // MAV ID: 31 cmd.p1 = fabsf(packet.param2); // param2 is radius in meters cmd.content.location.loiter_ccw = (packet.param2 < 0); cmd.content.location.loiter_xtrack = (packet.param4 > 0); // 0 to xtrack from center of waypoint, 1 to xtrack from tangent exit location break; case MAV_CMD_NAV_SPLINE_WAYPOINT: // MAV ID: 82 #if APM_BUILD_TYPE(APM_BUILD_ArduPlane) return MAV_MISSION_UNSUPPORTED; #else cmd.p1 = packet.param1; // delay at waypoint in seconds break; #endif case MAV_CMD_NAV_GUIDED_ENABLE: // MAV ID: 92 cmd.p1 = packet.param1; // on/off. >0.5 means "on", hand-over control to external controller break; case MAV_CMD_NAV_DELAY: // MAV ID: 93 cmd.content.nav_delay.seconds = packet.param1; // delay in seconds cmd.content.nav_delay.hour_utc = packet.param2;// absolute time's hour (utc) cmd.content.nav_delay.min_utc = packet.param3;// absolute time's min (utc) cmd.content.nav_delay.sec_utc = packet.param4; // absolute time's second (utc) break; case MAV_CMD_CONDITION_DELAY: // MAV ID: 112 cmd.content.delay.seconds = packet.param1; // delay in seconds break; case MAV_CMD_CONDITION_DISTANCE: // MAV ID: 114 cmd.content.distance.meters = packet.param1; // distance in meters from next waypoint break; case MAV_CMD_CONDITION_YAW: // MAV ID: 115 cmd.content.yaw.angle_deg = packet.param1; // target angle in degrees cmd.content.yaw.turn_rate_dps = packet.param2; // 0 = use default turn rate otherwise specific turn rate in deg/sec cmd.content.yaw.direction = packet.param3; // -1 = ccw, +1 = cw cmd.content.yaw.relative_angle = packet.param4; // lng=0: absolute angle provided, lng=1: relative angle provided break; case MAV_CMD_DO_JUMP: // MAV ID: 177 cmd.content.jump.target = packet.param1; // jump-to command number cmd.content.jump.num_times = packet.param2; // repeat count break; case MAV_CMD_DO_CHANGE_SPEED: // MAV ID: 178 cmd.content.speed.speed_type = packet.param1; // 0 = airspeed, 1 = ground speed cmd.content.speed.target_ms = packet.param2; // target speed in m/s cmd.content.speed.throttle_pct = packet.param3; // throttle as a percentage from 1 ~ 100% break; case MAV_CMD_DO_SET_HOME: cmd.p1 = packet.param1; // p1=0 means use current location, p=1 means use provided location break; case MAV_CMD_DO_SET_RELAY: // MAV ID: 181 cmd.content.relay.num = packet.param1; // relay number cmd.content.relay.state = packet.param2; // 0:off, 1:on break; case MAV_CMD_DO_REPEAT_RELAY: // MAV ID: 182 cmd.content.repeat_relay.num = packet.param1; // relay number cmd.content.repeat_relay.repeat_count = packet.param2; // count cmd.content.repeat_relay.cycle_time = packet.param3; // time converted from seconds to milliseconds break; case MAV_CMD_DO_SET_SERVO: // MAV ID: 183 cmd.content.servo.channel = packet.param1; // channel cmd.content.servo.pwm = packet.param2; // PWM break; case MAV_CMD_DO_REPEAT_SERVO: // MAV ID: 184 cmd.content.repeat_servo.channel = packet.param1; // channel cmd.content.repeat_servo.pwm = packet.param2; // PWM cmd.content.repeat_servo.repeat_count = packet.param3; // count cmd.content.repeat_servo.cycle_time = packet.param4; // time in seconds break; case MAV_CMD_DO_LAND_START: // MAV ID: 189 break; case MAV_CMD_DO_GO_AROUND: // MAV ID: 191 break; case MAV_CMD_DO_SET_ROI: // MAV ID: 201 cmd.p1 = packet.param1; // 0 = no roi, 1 = next waypoint, 2 = waypoint number, 3 = fixed location, 4 = given target (not supported) break; case MAV_CMD_DO_DIGICAM_CONFIGURE: // MAV ID: 202 cmd.content.digicam_configure.shooting_mode = packet.param1; cmd.content.digicam_configure.shutter_speed = packet.param2; cmd.content.digicam_configure.aperture = packet.param3; cmd.content.digicam_configure.ISO = packet.param4; cmd.content.digicam_configure.exposure_type = packet.x; cmd.content.digicam_configure.cmd_id = packet.y; cmd.content.digicam_configure.engine_cutoff_time = packet.z; break; case MAV_CMD_DO_DIGICAM_CONTROL: // MAV ID: 203 cmd.content.digicam_control.session = packet.param1; cmd.content.digicam_control.zoom_pos = packet.param2; cmd.content.digicam_control.zoom_step = packet.param3; cmd.content.digicam_control.focus_lock = packet.param4; cmd.content.digicam_control.shooting_cmd = packet.x; cmd.content.digicam_control.cmd_id = packet.y; break; case MAV_CMD_DO_MOUNT_CONTROL: // MAV ID: 205 cmd.content.mount_control.pitch = packet.param1; cmd.content.mount_control.roll = packet.param2; cmd.content.mount_control.yaw = packet.param3; break; case MAV_CMD_DO_SET_CAM_TRIGG_DIST: // MAV ID: 206 cmd.content.cam_trigg_dist.meters = packet.param1; // distance between camera shots in meters cmd.content.cam_trigg_dist.trigger = packet.param3; // when enabled, camera triggers once immediately break; case MAV_CMD_DO_FENCE_ENABLE: // MAV ID: 207 cmd.p1 = packet.param1; // action 0=disable, 1=enable break; case MAV_CMD_DO_AUX_FUNCTION: cmd.content.auxfunction.function = packet.param1; cmd.content.auxfunction.switchpos = packet.param2; break; case MAV_CMD_DO_PARACHUTE: // MAV ID: 208 cmd.p1 = packet.param1; // action 0=disable, 1=enable, 2=release. See PARACHUTE_ACTION enum break; case MAV_CMD_DO_INVERTED_FLIGHT: // MAV ID: 210 cmd.p1 = packet.param1; // normal=0 inverted=1 break; #if AP_GRIPPER_ENABLED case MAV_CMD_DO_GRIPPER: // MAV ID: 211 cmd.content.gripper.num = packet.param1; // gripper number cmd.content.gripper.action = packet.param2; // action 0=release, 1=grab. See GRIPPER_ACTION enum break; #endif case MAV_CMD_DO_GUIDED_LIMITS: // MAV ID: 222 cmd.p1 = packet.param1; // max time in seconds the external controller will be allowed to control the vehicle cmd.content.guided_limits.alt_min = packet.param2; // min alt below which the command will be aborted. 0 for no lower alt limit cmd.content.guided_limits.alt_max = packet.param3; // max alt above which the command will be aborted. 0 for no upper alt limit cmd.content.guided_limits.horiz_max = packet.param4;// max horizontal distance the vehicle can move before the command will be aborted. 0 for no horizontal limit break; case MAV_CMD_DO_AUTOTUNE_ENABLE: // MAV ID: 211 cmd.p1 = packet.param1; // disable=0 enable=1 break; case MAV_CMD_NAV_ALTITUDE_WAIT: // MAV ID: 83 cmd.content.altitude_wait.altitude = packet.param1; cmd.content.altitude_wait.descent_rate = packet.param2; cmd.content.altitude_wait.wiggle_time = packet.param3; break; case MAV_CMD_NAV_VTOL_TAKEOFF: break; case MAV_CMD_NAV_VTOL_LAND: cmd.p1 = (NAV_VTOL_LAND_OPTIONS)packet.param1; break; case MAV_CMD_DO_VTOL_TRANSITION: cmd.content.do_vtol_transition.target_state = packet.param1; break; case MAV_CMD_DO_SET_REVERSE: cmd.p1 = packet.param1; // 0 = forward, 1 = reverse break; case MAV_CMD_DO_ENGINE_CONTROL: cmd.content.do_engine_control.start_control = (packet.param1>0); cmd.content.do_engine_control.cold_start = (packet.param2>0); cmd.content.do_engine_control.height_delay_cm = packet.param3*100; break; case MAV_CMD_NAV_PAYLOAD_PLACE: cmd.p1 = packet.param1*100; // copy max-descend parameter (m->cm) break; case MAV_CMD_NAV_SET_YAW_SPEED: cmd.content.set_yaw_speed.angle_deg = packet.param1; // target angle in degrees cmd.content.set_yaw_speed.speed = packet.param2; // speed in meters/second cmd.content.set_yaw_speed.relative_angle = packet.param3; // 0 = absolute angle, 1 = relative angle break; case MAV_CMD_DO_WINCH: // MAV ID: 42600 cmd.content.winch.num = packet.param1; // winch number cmd.content.winch.action = packet.param2; // action (0 = relax, 1 = length control, 2 = rate control). See WINCH_ACTION enum cmd.content.winch.release_length = packet.param3; // cable distance to unwind in meters, negative numbers to wind in cable cmd.content.winch.release_rate = packet.param4; // release rate in meters/second break; case MAV_CMD_DO_SET_RESUME_REPEAT_DIST: cmd.p1 = packet.param1; // Resume repeat distance (m) break; case MAV_CMD_DO_SPRAYER: cmd.p1 = packet.param1; // action 0=disable, 1=enable break; case MAV_CMD_DO_SEND_SCRIPT_MESSAGE: cmd.p1 = packet.param1; cmd.content.scripting.p1 = packet.param2; cmd.content.scripting.p2 = packet.param3; cmd.content.scripting.p3 = packet.param4; break; case MAV_CMD_NAV_SCRIPT_TIME: cmd.content.nav_script_time.command = packet.param1; cmd.content.nav_script_time.timeout_s = packet.param2; cmd.content.nav_script_time.arg1 = packet.param3; cmd.content.nav_script_time.arg2 = packet.param4; break; case MAV_CMD_NAV_ATTITUDE_TIME: cmd.content.nav_attitude_time.time_sec = constrain_float(packet.param1, 0, UINT16_MAX); cmd.content.nav_attitude_time.roll_deg = (fabsf(packet.param2) <= 180) ? packet.param2 : 0; cmd.content.nav_attitude_time.pitch_deg = (fabsf(packet.param3) <= 90) ? packet.param3 : 0; cmd.content.nav_attitude_time.yaw_deg = ((packet.param4 >= -180) && (packet.param4 <= 360)) ? packet.param4 : 0; cmd.content.nav_attitude_time.climb_rate = packet.x; break; case MAV_CMD_DO_PAUSE_CONTINUE: cmd.p1 = packet.param1; break; case MAV_CMD_DO_GIMBAL_MANAGER_PITCHYAW: cmd.content.gimbal_manager_pitchyaw.pitch_angle_deg = packet.param1; cmd.content.gimbal_manager_pitchyaw.yaw_angle_deg = packet.param2; cmd.content.gimbal_manager_pitchyaw.pitch_rate_degs = packet.param3; cmd.content.gimbal_manager_pitchyaw.yaw_rate_degs = packet.param4; cmd.content.gimbal_manager_pitchyaw.flags = packet.x; cmd.content.gimbal_manager_pitchyaw.gimbal_id = packet.z; break; default: // unrecognised command return MAV_MISSION_UNSUPPORTED; } // copy location from mavlink to command if (stored_in_location(cmd.id)) { // sanity check location if (!check_lat(packet.x)) { return MAV_MISSION_INVALID_PARAM5_X; } if (!check_lng(packet.y)) { return MAV_MISSION_INVALID_PARAM6_Y; } if (isnan(packet.z) || fabsf(packet.z) >= LOCATION_ALT_MAX_M) { return MAV_MISSION_INVALID_PARAM7; } cmd.content.location.lat = packet.x; cmd.content.location.lng = packet.y; cmd.content.location.alt = packet.z * 100.0f; // convert packet's alt (m) to cmd alt (cm) switch (packet.frame) { case MAV_FRAME_MISSION: case MAV_FRAME_GLOBAL: case MAV_FRAME_GLOBAL_INT: cmd.content.location.relative_alt = 0; break; case MAV_FRAME_GLOBAL_RELATIVE_ALT: case MAV_FRAME_GLOBAL_RELATIVE_ALT_INT: cmd.content.location.relative_alt = 1; break; #if AP_TERRAIN_AVAILABLE case MAV_FRAME_GLOBAL_TERRAIN_ALT: case MAV_FRAME_GLOBAL_TERRAIN_ALT_INT: // we mark it as a relative altitude, as it doesn't have // home alt added cmd.content.location.relative_alt = 1; // mark altitude as above terrain, not above home cmd.content.location.terrain_alt = 1; break; #endif default: return MAV_MISSION_UNSUPPORTED_FRAME; } } // if we got this far then it must have been successful return MAV_MISSION_ACCEPTED; } MAV_MISSION_RESULT AP_Mission::convert_MISSION_ITEM_to_MISSION_ITEM_INT(const mavlink_mission_item_t &packet, mavlink_mission_item_int_t &mav_cmd) { // TODO: rename mav_cmd to mission_item_int // TODO: rename packet to mission_item mav_cmd.param1 = packet.param1; mav_cmd.param2 = packet.param2; mav_cmd.param3 = packet.param3; mav_cmd.param4 = packet.param4; mav_cmd.z = packet.z; mav_cmd.seq = packet.seq; mav_cmd.command = packet.command; mav_cmd.target_system = packet.target_system; mav_cmd.target_component = packet.target_component; mav_cmd.frame = packet.frame; mav_cmd.current = packet.current; mav_cmd.autocontinue = packet.autocontinue; mav_cmd.mission_type = packet.mission_type; /* the strategy for handling both MISSION_ITEM and MISSION_ITEM_INT is to pass the lat/lng in MISSION_ITEM_INT straight through, and for MISSION_ITEM multiply by 1e7 here. We need an exception for any commands which use the x and y fields not as latitude/longitude. */ switch (packet.command) { case MAV_CMD_DO_DIGICAM_CONTROL: case MAV_CMD_DO_DIGICAM_CONFIGURE: case MAV_CMD_NAV_ATTITUDE_TIME: case MAV_CMD_DO_GIMBAL_MANAGER_PITCHYAW: mav_cmd.x = packet.x; mav_cmd.y = packet.y; break; default: // all other commands use x and y as lat/lon. We need to // multiply by 1e7 to convert to int32_t if (!check_lat(packet.x)) { return MAV_MISSION_INVALID_PARAM5_X; } if (!check_lng(packet.y)) { return MAV_MISSION_INVALID_PARAM6_Y; } mav_cmd.x = packet.x * 1.0e7f; mav_cmd.y = packet.y * 1.0e7f; break; } return MAV_MISSION_ACCEPTED; } MAV_MISSION_RESULT AP_Mission::convert_MISSION_ITEM_INT_to_MISSION_ITEM(const mavlink_mission_item_int_t &item_int, mavlink_mission_item_t &item) { item.param1 = item_int.param1; item.param2 = item_int.param2; item.param3 = item_int.param3; item.param4 = item_int.param4; item.z = item_int.z; item.seq = item_int.seq; item.command = item_int.command; item.target_system = item_int.target_system; item.target_component = item_int.target_component; item.frame = item_int.frame; item.current = item_int.current; item.autocontinue = item_int.autocontinue; item.mission_type = item_int.mission_type; switch (item_int.command) { case MAV_CMD_DO_DIGICAM_CONTROL: case MAV_CMD_DO_DIGICAM_CONFIGURE: case MAV_CMD_NAV_ATTITUDE_TIME: case MAV_CMD_DO_GIMBAL_MANAGER_PITCHYAW: item.x = item_int.x; item.y = item_int.y; break; default: // all other commands use x and y as lat/lon. We need to // multiply by 1e-7 to convert to float item.x = item_int.x * 1.0e-7f; item.y = item_int.y * 1.0e-7f; if (!check_lat(item.x)) { return MAV_MISSION_INVALID_PARAM5_X; } if (!check_lng(item.y)) { return MAV_MISSION_INVALID_PARAM6_Y; } break; } return MAV_MISSION_ACCEPTED; } // mavlink_cmd_long_to_mission_cmd - converts a mavlink cmd long to an AP_Mission::Mission_Command object which can be stored to eeprom // return MAV_MISSION_ACCEPTED on success, MAV_MISSION_RESULT error on failure MAV_MISSION_RESULT AP_Mission::mavlink_cmd_long_to_mission_cmd(const mavlink_command_long_t& packet, AP_Mission::Mission_Command& cmd) { mavlink_mission_item_int_t miss_item = {0}; miss_item.param1 = packet.param1; miss_item.param2 = packet.param2; miss_item.param3 = packet.param3; miss_item.param4 = packet.param4; miss_item.command = packet.command; miss_item.target_system = packet.target_system; miss_item.target_component = packet.target_component; return mavlink_int_to_mission_cmd(miss_item, cmd); } // mission_cmd_to_mavlink_int - converts an AP_Mission::Mission_Command object to a mavlink message which can be sent to the GCS // return true on success, false on failure // NOTE: callers to this method current fill parts of "packet" in before calling this method, so do NOT attempt to zero the entire packet in here bool AP_Mission::mission_cmd_to_mavlink_int(const AP_Mission::Mission_Command& cmd, mavlink_mission_item_int_t& packet) { // command's position in mission list and mavlink id packet.seq = cmd.index; packet.command = cmd.id; // set defaults packet.current = 0; // 1 if we are passing back the mission command that is currently being executed packet.param1 = 0; packet.param2 = 0; packet.param3 = 0; packet.param4 = 0; packet.frame = 0; packet.autocontinue = 1; // command specific conversions from mission command to mavlink packet switch (cmd.id) { case 0: // this is reserved for 16 bit command IDs return false; case MAV_CMD_NAV_WAYPOINT: // MAV ID: 16 #if APM_BUILD_TYPE(APM_BUILD_ArduPlane) // acceptance radius in meters packet.param2 = LOWBYTE(cmd.p1); // param 2 is acceptance radius in meters is held in low p1 packet.param3 = HIGHBYTE(cmd.p1); // param 3 is pass by distance in meters is held in high p1 #else // delay at waypoint in seconds packet.param1 = cmd.p1; #endif break; case MAV_CMD_NAV_LOITER_UNLIM: // MAV ID: 17 packet.param3 = (float)cmd.p1; if (cmd.content.location.loiter_ccw) { packet.param3 *= -1; } break; case MAV_CMD_NAV_LOITER_TURNS: // MAV ID: 18 packet.param1 = LOWBYTE(cmd.p1); // number of times to circle is held in low byte of p1 packet.param3 = HIGHBYTE(cmd.p1); // radius is held in high byte of p1 if (cmd.content.location.loiter_ccw) { packet.param3 = -packet.param3; } if (cmd.type_specific_bits & (1U<<0)) { packet.param3 *= 10; } packet.param4 = cmd.content.location.loiter_xtrack; // 0 to xtrack from center of waypoint, 1 to xtrack from tangent exit location break; case MAV_CMD_NAV_LOITER_TIME: // MAV ID: 19 packet.param1 = cmd.p1; // loiter time in seconds if (cmd.content.location.loiter_ccw) { packet.param3 = -1; } else { packet.param3 = 1; } packet.param4 = cmd.content.location.loiter_xtrack; // 0 to xtrack from center of waypoint, 1 to xtrack from tangent exit location break; case MAV_CMD_NAV_RETURN_TO_LAUNCH: // MAV ID: 20 break; case MAV_CMD_NAV_LAND: // MAV ID: 21 packet.param1 = cmd.p1; // abort target altitude(m) (plane only) packet.param4 = cmd.content.location.loiter_ccw ? -1 : 1; // yaw direction, (plane deepstall only) break; case MAV_CMD_NAV_TAKEOFF: // MAV ID: 22 packet.param1 = cmd.p1; // minimum pitch (plane only) break; case MAV_CMD_NAV_CONTINUE_AND_CHANGE_ALT: // MAV ID: 30 packet.param1 = cmd.p1; // Climb/Descend // 0 = Neutral, cmd complete at +/- 5 of indicated alt. // 1 = Climb, cmd complete at or above indicated alt. // 2 = Descend, cmd complete at or below indicated alt. break; case MAV_CMD_NAV_LOITER_TO_ALT: // MAV ID: 31 packet.param2 = cmd.p1; // loiter radius(m) if (cmd.content.location.loiter_ccw) { packet.param2 = -packet.param2; } packet.param4 = cmd.content.location.loiter_xtrack; // 0 to xtrack from center of waypoint, 1 to xtrack from tangent exit location break; case MAV_CMD_NAV_SPLINE_WAYPOINT: // MAV ID: 82 packet.param1 = cmd.p1; // delay at waypoint in seconds break; case MAV_CMD_NAV_GUIDED_ENABLE: // MAV ID: 92 packet.param1 = cmd.p1; // on/off. >0.5 means "on", hand-over control to external controller break; case MAV_CMD_NAV_DELAY: // MAV ID: 93 packet.param1 = cmd.content.nav_delay.seconds; // delay in seconds packet.param2 = cmd.content.nav_delay.hour_utc; // absolute time's day of week (utc) packet.param3 = cmd.content.nav_delay.min_utc; // absolute time's hour (utc) packet.param4 = cmd.content.nav_delay.sec_utc; // absolute time's min (utc) break; case MAV_CMD_CONDITION_DELAY: // MAV ID: 112 packet.param1 = cmd.content.delay.seconds; // delay in seconds break; case MAV_CMD_CONDITION_DISTANCE: // MAV ID: 114 packet.param1 = cmd.content.distance.meters; // distance in meters from next waypoint break; case MAV_CMD_CONDITION_YAW: // MAV ID: 115 packet.param1 = cmd.content.yaw.angle_deg; // target angle in degrees packet.param2 = cmd.content.yaw.turn_rate_dps; // 0 = use default turn rate otherwise specific turn rate in deg/sec packet.param3 = cmd.content.yaw.direction; // -1 = ccw, +1 = cw packet.param4 = cmd.content.yaw.relative_angle; // 0 = absolute angle provided, 1 = relative angle provided break; case MAV_CMD_DO_JUMP: // MAV ID: 177 packet.param1 = cmd.content.jump.target; // jump-to command number packet.param2 = cmd.content.jump.num_times; // repeat count break; case MAV_CMD_DO_CHANGE_SPEED: // MAV ID: 178 packet.param1 = cmd.content.speed.speed_type; // 0 = airspeed, 1 = ground speed packet.param2 = cmd.content.speed.target_ms; // speed in m/s packet.param3 = cmd.content.speed.throttle_pct; // throttle as a percentage from 1 ~ 100% break; case MAV_CMD_DO_SET_HOME: // MAV ID: 179 packet.param1 = cmd.p1; // p1=0 means use current location, p=1 means use provided location break; case MAV_CMD_DO_SET_RELAY: // MAV ID: 181 packet.param1 = cmd.content.relay.num; // relay number packet.param2 = cmd.content.relay.state; // 0:off, 1:on break; case MAV_CMD_DO_REPEAT_RELAY: // MAV ID: 182 packet.param1 = cmd.content.repeat_relay.num; // relay number packet.param2 = cmd.content.repeat_relay.repeat_count; // count packet.param3 = cmd.content.repeat_relay.cycle_time; // time in seconds break; case MAV_CMD_DO_SET_SERVO: // MAV ID: 183 packet.param1 = cmd.content.servo.channel; // channel packet.param2 = cmd.content.servo.pwm; // PWM break; case MAV_CMD_DO_REPEAT_SERVO: // MAV ID: 184 packet.param1 = cmd.content.repeat_servo.channel; // channel packet.param2 = cmd.content.repeat_servo.pwm; // PWM packet.param3 = cmd.content.repeat_servo.repeat_count; // count packet.param4 = cmd.content.repeat_servo.cycle_time; // time in milliseconds converted to seconds break; case MAV_CMD_DO_LAND_START: // MAV ID: 189 break; case MAV_CMD_DO_GO_AROUND: // MAV ID: 191 break; case MAV_CMD_DO_SET_ROI: // MAV ID: 201 packet.param1 = cmd.p1; // 0 = no roi, 1 = next waypoint, 2 = waypoint number, 3 = fixed location, 4 = given target (not supported) break; case MAV_CMD_DO_DIGICAM_CONFIGURE: // MAV ID: 202 packet.param1 = cmd.content.digicam_configure.shooting_mode; packet.param2 = cmd.content.digicam_configure.shutter_speed; packet.param3 = cmd.content.digicam_configure.aperture; packet.param4 = cmd.content.digicam_configure.ISO; packet.x = cmd.content.digicam_configure.exposure_type; packet.y = cmd.content.digicam_configure.cmd_id; packet.z = cmd.content.digicam_configure.engine_cutoff_time; break; case MAV_CMD_DO_DIGICAM_CONTROL: // MAV ID: 203 packet.param1 = cmd.content.digicam_control.session; packet.param2 = cmd.content.digicam_control.zoom_pos; packet.param3 = cmd.content.digicam_control.zoom_step; packet.param4 = cmd.content.digicam_control.focus_lock; packet.x = cmd.content.digicam_control.shooting_cmd; packet.y = cmd.content.digicam_control.cmd_id; break; case MAV_CMD_DO_MOUNT_CONTROL: // MAV ID: 205 packet.param1 = cmd.content.mount_control.pitch; packet.param2 = cmd.content.mount_control.roll; packet.param3 = cmd.content.mount_control.yaw; break; case MAV_CMD_DO_SET_CAM_TRIGG_DIST: // MAV ID: 206 packet.param1 = cmd.content.cam_trigg_dist.meters; // distance between camera shots in meters packet.param3 = cmd.content.cam_trigg_dist.trigger; // when enabled, camera triggers once immediately break; case MAV_CMD_DO_FENCE_ENABLE: // MAV ID: 207 packet.param1 = cmd.p1; // action 0=disable, 1=enable break; case MAV_CMD_DO_PARACHUTE: // MAV ID: 208 packet.param1 = cmd.p1; // action 0=disable, 1=enable, 2=release. See PARACHUTE_ACTION enum break; case MAV_CMD_DO_SPRAYER: packet.param1 = cmd.p1; // action 0=disable, 1=enable break; case MAV_CMD_DO_AUX_FUNCTION: packet.param1 = cmd.content.auxfunction.function; packet.param2 = cmd.content.auxfunction.switchpos; break; case MAV_CMD_DO_INVERTED_FLIGHT: // MAV ID: 210 packet.param1 = cmd.p1; // normal=0 inverted=1 break; #if AP_GRIPPER_ENABLED case MAV_CMD_DO_GRIPPER: // MAV ID: 211 packet.param1 = cmd.content.gripper.num; // gripper number packet.param2 = cmd.content.gripper.action; // action 0=release, 1=grab. See GRIPPER_ACTION enum break; #endif case MAV_CMD_DO_GUIDED_LIMITS: // MAV ID: 222 packet.param1 = cmd.p1; // max time in seconds the external controller will be allowed to control the vehicle packet.param2 = cmd.content.guided_limits.alt_min; // min alt below which the command will be aborted. 0 for no lower alt limit packet.param3 = cmd.content.guided_limits.alt_max; // max alt above which the command will be aborted. 0 for no upper alt limit packet.param4 = cmd.content.guided_limits.horiz_max;// max horizontal distance the vehicle can move before the command will be aborted. 0 for no horizontal limit break; case MAV_CMD_DO_AUTOTUNE_ENABLE: packet.param1 = cmd.p1; // disable=0 enable=1 break; case MAV_CMD_DO_SET_REVERSE: packet.param1 = cmd.p1; // 0 = forward, 1 = reverse break; case MAV_CMD_NAV_ALTITUDE_WAIT: // MAV ID: 83 packet.param1 = cmd.content.altitude_wait.altitude; packet.param2 = cmd.content.altitude_wait.descent_rate; packet.param3 = cmd.content.altitude_wait.wiggle_time; break; case MAV_CMD_NAV_VTOL_TAKEOFF: break; case MAV_CMD_NAV_VTOL_LAND: packet.param1 = cmd.p1; break; case MAV_CMD_DO_VTOL_TRANSITION: packet.param1 = cmd.content.do_vtol_transition.target_state; break; case MAV_CMD_DO_ENGINE_CONTROL: packet.param1 = cmd.content.do_engine_control.start_control?1:0; packet.param2 = cmd.content.do_engine_control.cold_start?1:0; packet.param3 = cmd.content.do_engine_control.height_delay_cm*0.01f; break; case MAV_CMD_NAV_PAYLOAD_PLACE: packet.param1 = cmd.p1/100.0f; // copy max-descend parameter (cm->m) break; case MAV_CMD_NAV_SET_YAW_SPEED: packet.param1 = cmd.content.set_yaw_speed.angle_deg; // target angle in degrees packet.param2 = cmd.content.set_yaw_speed.speed; // speed in meters/second packet.param3 = cmd.content.set_yaw_speed.relative_angle; // 0 = absolute angle, 1 = relative angle break; case MAV_CMD_DO_WINCH: packet.param1 = cmd.content.winch.num; // winch number packet.param2 = cmd.content.winch.action; // action (0 = relax, 1 = length control, 2 = rate control). See WINCH_ACTION enum packet.param3 = cmd.content.winch.release_length; // cable distance to unwind in meters, negative numbers to wind in cable packet.param4 = cmd.content.winch.release_rate; // release rate in meters/second break; case MAV_CMD_DO_SET_RESUME_REPEAT_DIST: packet.param1 = cmd.p1; // Resume repeat distance (m) break; case MAV_CMD_DO_SEND_SCRIPT_MESSAGE: packet.param1 = cmd.p1; packet.param2 = cmd.content.scripting.p1; packet.param3 = cmd.content.scripting.p2; packet.param4 = cmd.content.scripting.p3; break; case MAV_CMD_NAV_SCRIPT_TIME: packet.param1 = cmd.content.nav_script_time.command; packet.param2 = cmd.content.nav_script_time.timeout_s; packet.param3 = cmd.content.nav_script_time.arg1; packet.param4 = cmd.content.nav_script_time.arg2; break; case MAV_CMD_NAV_ATTITUDE_TIME: packet.param1 = cmd.content.nav_attitude_time.time_sec; packet.param2 = cmd.content.nav_attitude_time.roll_deg; packet.param3 = cmd.content.nav_attitude_time.pitch_deg; packet.param4 = cmd.content.nav_attitude_time.yaw_deg; packet.x = cmd.content.nav_attitude_time.climb_rate; break; case MAV_CMD_DO_PAUSE_CONTINUE: packet.param1 = cmd.p1; break; case MAV_CMD_DO_GIMBAL_MANAGER_PITCHYAW: packet.param1 = cmd.content.gimbal_manager_pitchyaw.pitch_angle_deg; packet.param2 = cmd.content.gimbal_manager_pitchyaw.yaw_angle_deg; packet.param3 = cmd.content.gimbal_manager_pitchyaw.pitch_rate_degs; packet.param4 = cmd.content.gimbal_manager_pitchyaw.yaw_rate_degs; packet.x = cmd.content.gimbal_manager_pitchyaw.flags; packet.z = cmd.content.gimbal_manager_pitchyaw.gimbal_id; break; default: // unrecognised command return false; } // copy location from mavlink to command if (stored_in_location(cmd.id)) { packet.x = cmd.content.location.lat; packet.y = cmd.content.location.lng; packet.z = cmd.content.location.alt * 0.01f; // cmd alt in cm to m if (cmd.content.location.relative_alt) { packet.frame = MAV_FRAME_GLOBAL_RELATIVE_ALT; } else { packet.frame = MAV_FRAME_GLOBAL; } #if AP_TERRAIN_AVAILABLE if (cmd.content.location.terrain_alt) { // this is a above-terrain altitude if (!cmd.content.location.relative_alt) { // refuse to return non-relative terrain mission // items. Internally we do have these, and they // have home.alt added, but we should never be // returning them to the GCS, as the GCS doesn't know // our home.alt, so it would have no way to properly // interpret it return false; } packet.z = cmd.content.location.alt * 0.01f; packet.frame = MAV_FRAME_GLOBAL_TERRAIN_ALT; } #else // don't ever return terrain mission items if no terrain support if (cmd.content.location.terrain_alt) { return false; } #endif } // if we got this far then it must have been successful return true; } /// /// private methods /// /// complete - mission is marked complete and clean-up performed including calling the mission_complete_fn void AP_Mission::complete() { // flag mission as complete _flags.state = MISSION_COMPLETE; _flags.in_landing_sequence = false; // callback to main program's mission complete function _mission_complete_fn(); } /// advance_current_nav_cmd - moves current nav command forward /// do command will also be loaded /// accounts for do-jump commands // returns true if command is advanced, false if failed (i.e. mission completed) bool AP_Mission::advance_current_nav_cmd(uint16_t starting_index) { // exit immediately if we're not running if (_flags.state != MISSION_RUNNING) { return false; } // exit immediately if current nav command has not completed if (_flags.nav_cmd_loaded) { return false; } // stop the current running do command _do_cmd.index = AP_MISSION_CMD_INDEX_NONE; _flags.do_cmd_loaded = false; _flags.do_cmd_all_done = false; // get starting point for search uint16_t cmd_index = starting_index > 0 ? starting_index - 1 : _nav_cmd.index; if (cmd_index == AP_MISSION_CMD_INDEX_NONE) { // start from beginning of the mission command list cmd_index = AP_MISSION_FIRST_REAL_COMMAND; } else { // start from one position past the current nav command cmd_index++; } // avoid endless loops uint8_t max_loops = 255; // search until we find next nav command or reach end of command list while (!_flags.nav_cmd_loaded && max_loops-- > 0) { // get next command Mission_Command cmd; if (!get_next_cmd(cmd_index, cmd, true)) { return false; } // check if navigation or "do" command if (is_nav_cmd(cmd)) { // save previous nav command index _prev_nav_cmd_id = _nav_cmd.id; _prev_nav_cmd_index = _nav_cmd.index; // save separate previous nav command index if it contains lat,long,alt if (!(cmd.content.location.lat == 0 && cmd.content.location.lng == 0)) { _prev_nav_cmd_wp_index = _nav_cmd.index; } // set current navigation command and start it _nav_cmd = cmd; if (start_command(_nav_cmd)) { _flags.nav_cmd_loaded = true; } // save a loaded wp index in history array for when _repeat_dist is set via MAV_CMD_DO_SET_RESUME_REPEAT_DIST // and prevent history being re-written until vehicle returns to interrupted position if (_repeat_dist > 0 && !_flags.resuming_mission && _nav_cmd.index != AP_MISSION_CMD_INDEX_NONE && !(_nav_cmd.content.location.lat == 0 && _nav_cmd.content.location.lng == 0)) { // update mission history. last index position is always the most recent wp loaded. for (uint8_t i=0; i= (unsigned)_cmd_total) || (temp_cmd.content.jump.target == 0)) { // To-Do: log an error? return false; } // check for endless loops if (!increment_jump_num_times_if_found && jump_index == cmd_index) { // we have somehow reached this jump command twice and there is no chance it will complete // To-Do: log an error? return false; } // record this command so we can check for endless loops if (jump_index == AP_MISSION_CMD_INDEX_NONE) { jump_index = cmd_index; } // check if jump command is 'repeat forever' if (temp_cmd.content.jump.num_times == AP_MISSION_JUMP_REPEAT_FOREVER) { // continue searching from jump target cmd_index = temp_cmd.content.jump.target; } else { // get number of times jump command has already been run int16_t jump_times_run = get_jump_times_run(temp_cmd); if (jump_times_run < temp_cmd.content.jump.num_times) { // update the record of the number of times run if (increment_jump_num_times_if_found && !_flags.resuming_mission) { increment_jump_times_run(temp_cmd, send_gcs_msg); } // continue searching from jump target cmd_index = temp_cmd.content.jump.target; } else { // jump has been run specified number of times so move search to next command in mission cmd_index++; } } } else { // this is a non-jump command so return it cmd = temp_cmd; return true; } } // if we got this far we did not find a navigation command return false; } /// get_next_do_cmd - gets next "do" or "conditional" command after start_index /// returns true if found, false if not found /// stops and returns false if it hits another navigation command before it finds the first do or conditional command /// accounts for do_jump commands but never increments the jump's num_times_run (advance_current_nav_cmd is responsible for this) bool AP_Mission::get_next_do_cmd(uint16_t start_index, Mission_Command& cmd) { Mission_Command temp_cmd; // check we have not passed the end of the mission list if (start_index >= (unsigned)_cmd_total) { return false; } // get next command if (!get_next_cmd(start_index, temp_cmd, false)) { // no more commands so return failure return false; } else if (is_nav_cmd(temp_cmd)) { // if it's a "navigation" command then return false because we do not progress past nav commands return false; } else { // this must be a "do" or "conditional" and is not a do-jump command so return it cmd = temp_cmd; return true; } } /// /// jump handling methods /// // init_jump_tracking - initialise jump_tracking variables void AP_Mission::init_jump_tracking() { for (uint8_t i=0; i= (unsigned)_cmd_total) || (cmd.content.jump.target == 0)) { // To-Do: log an error? return AP_MISSION_JUMP_TIMES_MAX; } // search through jump_tracking array for this cmd for (uint8_t i=0; i= dist_continue_to_land) { // then the mission should carry on uninterrupted as that is the shorter distance gcs().send_text(MAV_SEVERITY_NOTICE, "Rejecting RTL: closer land if mis continued"); return true; } else { // allow failsafes to interrupt the current mission return false; } } // Approximate the distance travelled to get to a landing. DO_JUMP commands are observed in look forward. bool AP_Mission::distance_to_landing(uint16_t index, float &tot_distance, Location prev_loc) { Mission_Command temp_cmd; tot_distance = 0.0f; bool ret; // back up jump tracking to reset after distance calculation jump_tracking_struct _jump_tracking_backup[AP_MISSION_MAX_NUM_DO_JUMP_COMMANDS]; for (uint8_t i=0; i=0; i--) { // to get this far there has to be at least one 'passed wp' stored in history. This is to check incase // of history array no being completely filled with valid waypoints upon resume. if (_wp_index_history[i] == AP_MISSION_CMD_INDEX_NONE) { // no more stored history resume_index = i+1; break; } if (!read_cmd_from_storage(_wp_index_history[i], temp_cmd)) { // if read from storage failed then don't use rewind return false; } // calculate distance float disttemp = prev_loc.get_distance(temp_cmd.content.location); //(m) rewind_distance -= disttemp; resume_index = i; if (rewind_distance <= 0.0f) { // history rewound enough distance to meet _repeat_dist requirement rewind_cmd = temp_cmd; break; } // store wp location as previous prev_loc = temp_cmd.content.location; } if (rewind_distance > 0.0f) { // then the history array was rewound all of the way without finding a wp distance > _repeat_dist distance. // the last read temp_cmd will be the furthest cmd back in the history array so resume to that. rewind_cmd = temp_cmd; return true; } // if we have got this far the desired rewind distance lies between two waypoints stored in history array. // calculate the location for the mission to resume // the last wp read from storage is the wp that is before the resume wp in the mission order Location passed_wp_loc = temp_cmd.content.location; // fetch next destination wp if (!read_cmd_from_storage(_wp_index_history[resume_index+1], temp_cmd)) { // if read from storage failed then don't use rewind return false; } // determine the length of the mission leg that the resume wp lies in float leg_length = passed_wp_loc.get_distance(temp_cmd.content.location); //(m) // calculate the percentage along the leg that resume wp will be positioned float leg_percent = fabsf(rewind_distance)/leg_length; // calculate difference vector of mission leg Vector3f dist_vec = passed_wp_loc.get_distance_NED(temp_cmd.content.location); // calculate the resume wp position rewind_cmd.content.location.offset(dist_vec.x * leg_percent, dist_vec.y * leg_percent); rewind_cmd.content.location.alt -= dist_vec.z * leg_percent * 100; //(cm) // The rewind_cmd.index has the index of the 'last passed wp' from the history array. This ensures that the mission order // continues as planned without further intervention. The resume wp is not written to memory so will not perminantely change the mission. // if we got this far then mission rewind position was successfully calculated return true; } // singleton instance AP_Mission *AP_Mission::_singleton; namespace AP { AP_Mission *mission() { return AP_Mission::get_singleton(); } }