/* This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #include "AP_GPS.h" #include #include #include #include #include #include #include #include #include "AP_GPS_NOVA.h" #include "AP_GPS_ERB.h" #include "AP_GPS_GSOF.h" #include "AP_GPS_MTK.h" #include "AP_GPS_MTK19.h" #include "AP_GPS_NMEA.h" #include "AP_GPS_SBF.h" #include "AP_GPS_SBP.h" #include "AP_GPS_SBP2.h" #include "AP_GPS_SIRF.h" #include "AP_GPS_UBLOX.h" #include "AP_GPS_MAV.h" #include "AP_GPS_MSP.h" #include "AP_GPS_ExternalAHRS.h" #include "GPS_Backend.h" #if HAL_ENABLE_LIBUAVCAN_DRIVERS #include #include #include "AP_GPS_UAVCAN.h" #endif #include #include #define GPS_RTK_INJECT_TO_ALL 127 #ifndef GPS_MAX_RATE_MS #define GPS_MAX_RATE_MS 200 // maximum value of rate_ms (i.e. slowest update rate) is 5hz or 200ms #endif #define GPS_BAUD_TIME_MS 1200 #define GPS_TIMEOUT_MS 4000u // defines used to specify the mask position for use of different accuracy metrics in the blending algorithm #define BLEND_MASK_USE_HPOS_ACC 1 #define BLEND_MASK_USE_VPOS_ACC 2 #define BLEND_MASK_USE_SPD_ACC 4 #define BLEND_COUNTER_FAILURE_INCREMENT 10 #ifndef HAL_GPS_COM_PORT_DEFAULT #define HAL_GPS_COM_PORT_DEFAULT 1 #endif extern const AP_HAL::HAL &hal; // baudrates to try to detect GPSes with const uint32_t AP_GPS::_baudrates[] = {9600U, 115200U, 4800U, 19200U, 38400U, 57600U, 230400U, 460800U}; // initialisation blobs to send to the GPS to try to get it into the // right mode const char AP_GPS::_initialisation_blob[] = UBLOX_SET_BINARY_230400 MTK_SET_BINARY SIRF_SET_BINARY; AP_GPS *AP_GPS::_singleton; // table of user settable parameters const AP_Param::GroupInfo AP_GPS::var_info[] = { // @Param: _TYPE // @DisplayName: 1st GPS type // @Description: GPS type of 1st GPS // @Values: 0:None,1:AUTO,2:uBlox,3:MTK,4:MTK19,5:NMEA,6:SiRF,7:HIL,8:SwiftNav,9:UAVCAN,10:SBF,11:GSOF,13:ERB,14:MAV,15:NOVA,16:HemisphereNMEA,17:uBlox-MovingBaseline-Base,18:uBlox-MovingBaseline-Rover,19:MSP,20:AllyStar,21:ExternalAHRS // @RebootRequired: True // @User: Advanced AP_GROUPINFO("_TYPE", 0, AP_GPS, _type[0], HAL_GPS_TYPE_DEFAULT), #if GPS_MAX_RECEIVERS > 1 // @Param: _TYPE2 // @DisplayName: 2nd GPS type // @Description: GPS type of 2nd GPS // @Values: 0:None,1:AUTO,2:uBlox,3:MTK,4:MTK19,5:NMEA,6:SiRF,7:HIL,8:SwiftNav,9:UAVCAN,10:SBF,11:GSOF,13:ERB,14:MAV,15:NOVA,16:HemisphereNMEA,17:uBlox-MovingBaseline-Base,18:uBlox-MovingBaseline-Rover,19:MSP,20:AllyStar,21:ExternalAHRS // @RebootRequired: True // @User: Advanced AP_GROUPINFO("_TYPE2", 1, AP_GPS, _type[1], 0), #endif // @Param: _NAVFILTER // @DisplayName: Navigation filter setting // @Description: Navigation filter engine setting // @Values: 0:Portable,2:Stationary,3:Pedestrian,4:Automotive,5:Sea,6:Airborne1G,7:Airborne2G,8:Airborne4G // @User: Advanced AP_GROUPINFO("_NAVFILTER", 2, AP_GPS, _navfilter, GPS_ENGINE_AIRBORNE_4G), #if GPS_MAX_RECEIVERS > 1 // @Param: _AUTO_SWITCH // @DisplayName: Automatic Switchover Setting // @Description: Automatic switchover to GPS reporting best lock, 1:UseBest selects the GPS with highest status, if both are equal the GPS with highest satellite count is used 4:Use primary if 3D fix or better, will revert to 'UseBest' behaviour if 3D fix is lost on primary // @Values: 0:Use primary, 1:UseBest, 2:Blend, 4:Use primary if 3D fix or better // @User: Advanced AP_GROUPINFO("_AUTO_SWITCH", 3, AP_GPS, _auto_switch, (int8_t)GPSAutoSwitch::USE_BEST), #endif // @Param: _MIN_DGPS // @DisplayName: Minimum Lock Type Accepted for DGPS // @Description: Sets the minimum type of differential GPS corrections required before allowing to switch into DGPS mode. // @Values: 0:Any,50:FloatRTK,100:IntegerRTK // @User: Advanced // @RebootRequired: True AP_GROUPINFO("_MIN_DGPS", 4, AP_GPS, _min_dgps, 100), // @Param: _SBAS_MODE // @DisplayName: SBAS Mode // @Description: This sets the SBAS (satellite based augmentation system) mode if available on this GPS. If set to 2 then the SBAS mode is not changed in the GPS. Otherwise the GPS will be reconfigured to enable/disable SBAS. Disabling SBAS may be worthwhile in some parts of the world where an SBAS signal is available but the baseline is too long to be useful. // @Values: 0:Disabled,1:Enabled,2:NoChange // @User: Advanced AP_GROUPINFO("_SBAS_MODE", 5, AP_GPS, _sbas_mode, 2), // @Param: _MIN_ELEV // @DisplayName: Minimum elevation // @Description: This sets the minimum elevation of satellites above the horizon for them to be used for navigation. Setting this to -100 leaves the minimum elevation set to the GPS modules default. // @Range: -100 90 // @Units: deg // @User: Advanced AP_GROUPINFO("_MIN_ELEV", 6, AP_GPS, _min_elevation, -100), // @Param: _INJECT_TO // @DisplayName: Destination for GPS_INJECT_DATA MAVLink packets // @Description: The GGS can send raw serial packets to inject data to multiple GPSes. // @Values: 0:send to first GPS,1:send to 2nd GPS,127:send to all // @User: Advanced AP_GROUPINFO("_INJECT_TO", 7, AP_GPS, _inject_to, GPS_RTK_INJECT_TO_ALL), // @Param: _SBP_LOGMASK // @DisplayName: Swift Binary Protocol Logging Mask // @Description: Masked with the SBP msg_type field to determine whether SBR1/SBR2 data is logged // @Values: 0:None (0x0000),-1:All (0xFFFF),-256:External only (0xFF00) // @User: Advanced AP_GROUPINFO("_SBP_LOGMASK", 8, AP_GPS, _sbp_logmask, -256), // @Param: _RAW_DATA // @DisplayName: Raw data logging // @Description: Handles logging raw data; on uBlox chips that support raw data this will log RXM messages into logger; on Septentrio this will log on the equipment's SD card and when set to 2, the autopilot will try to stop logging after disarming and restart after arming // @Values: 0:Ignore,1:Always log,2:Stop logging when disarmed (SBF only),5:Only log every five samples (uBlox only) // @RebootRequired: True // @User: Advanced AP_GROUPINFO("_RAW_DATA", 9, AP_GPS, _raw_data, 0), // @Param: _GNSS_MODE // @DisplayName: GNSS system configuration // @Description: Bitmask for what GNSS system to use on the first GPS (all unchecked or zero to leave GPS as configured) // @Bitmask: 0:GPS,1:SBAS,2:Galileo,3:Beidou,4:IMES,5:QZSS,6:GLONASS // @User: Advanced AP_GROUPINFO("_GNSS_MODE", 10, AP_GPS, _gnss_mode[0], 0), // @Param: _SAVE_CFG // @DisplayName: Save GPS configuration // @Description: Determines whether the configuration for this GPS should be written to non-volatile memory on the GPS. Currently working for UBlox 6 series and above. // @Values: 0:Do not save config,1:Save config,2:Save only when needed // @User: Advanced AP_GROUPINFO("_SAVE_CFG", 11, AP_GPS, _save_config, 2), #if GPS_MAX_RECEIVERS > 1 // @Param: _GNSS_MODE2 // @DisplayName: GNSS system configuration // @Description: Bitmask for what GNSS system to use on the second GPS (all unchecked or zero to leave GPS as configured) // @Bitmask: 0:GPS,1:SBAS,2:Galileo,3:Beidou,4:IMES,5:QZSS,6:GLONASS // @User: Advanced AP_GROUPINFO("_GNSS_MODE2", 12, AP_GPS, _gnss_mode[1], 0), #endif // @Param: _AUTO_CONFIG // @DisplayName: Automatic GPS configuration // @Description: Controls if the autopilot should automatically configure the GPS based on the parameters and default settings // @Values: 0:Disables automatic configuration,1:Enable automatic configuration // @User: Advanced AP_GROUPINFO("_AUTO_CONFIG", 13, AP_GPS, _auto_config, 1), // @Param: _RATE_MS // @DisplayName: GPS update rate in milliseconds // @Description: Controls how often the GPS should provide a position update. Lowering below 5Hz(default) is not allowed. Raising the rate above 5Hz usually provides little benefit and for some GPS (eg Ublox M9N) can severely impact performance. // @Units: ms // @Values: 100:10Hz,125:8Hz,200:5Hz // @Range: 50 200 // @User: Advanced AP_GROUPINFO("_RATE_MS", 14, AP_GPS, _rate_ms[0], 200), #if GPS_MAX_RECEIVERS > 1 // @Param: _RATE_MS2 // @DisplayName: GPS 2 update rate in milliseconds // @Description: Controls how often the GPS should provide a position update. Lowering below 5Hz(default) is not allowed. Raising the rate above 5Hz usually provides little benefit and for some GPS (eg Ublox M9N) can severely impact performance. // @Units: ms // @Values: 100:10Hz,125:8Hz,200:5Hz // @Range: 50 200 // @User: Advanced AP_GROUPINFO("_RATE_MS2", 15, AP_GPS, _rate_ms[1], 200), #endif // @Param: _POS1_X // @DisplayName: Antenna X position offset // @Description: X position of the first GPS antenna in body frame. Positive X is forward of the origin. Use antenna phase centroid location if provided by the manufacturer. // @Units: m // @Range: -5 5 // @Increment: 0.01 // @User: Advanced // @Param: _POS1_Y // @DisplayName: Antenna Y position offset // @Description: Y position of the first GPS antenna in body frame. Positive Y is to the right of the origin. Use antenna phase centroid location if provided by the manufacturer. // @Units: m // @Range: -5 5 // @Increment: 0.01 // @User: Advanced // @Param: _POS1_Z // @DisplayName: Antenna Z position offset // @Description: Z position of the first GPS antenna in body frame. Positive Z is down from the origin. Use antenna phase centroid location if provided by the manufacturer. // @Units: m // @Range: -5 5 // @Increment: 0.01 // @User: Advanced AP_GROUPINFO("_POS1", 16, AP_GPS, _antenna_offset[0], 0.0f), #if GPS_MAX_RECEIVERS > 1 // @Param: _POS2_X // @DisplayName: Antenna X position offset // @Description: X position of the second GPS antenna in body frame. Positive X is forward of the origin. Use antenna phase centroid location if provided by the manufacturer. // @Units: m // @Range: -5 5 // @Increment: 0.01 // @User: Advanced // @Param: _POS2_Y // @DisplayName: Antenna Y position offset // @Description: Y position of the second GPS antenna in body frame. Positive Y is to the right of the origin. Use antenna phase centroid location if provided by the manufacturer. // @Units: m // @Range: -5 5 // @Increment: 0.01 // @User: Advanced // @Param: _POS2_Z // @DisplayName: Antenna Z position offset // @Description: Z position of the second GPS antenna in body frame. Positive Z is down from the origin. Use antenna phase centroid location if provided by the manufacturer. // @Units: m // @Range: -5 5 // @Increment: 0.01 // @User: Advanced AP_GROUPINFO("_POS2", 17, AP_GPS, _antenna_offset[1], 0.0f), #endif // @Param: _DELAY_MS // @DisplayName: GPS delay in milliseconds // @Description: Controls the amount of GPS measurement delay that the autopilot compensates for. Set to zero to use the default delay for the detected GPS type. // @Units: ms // @Range: 0 250 // @User: Advanced // @RebootRequired: True AP_GROUPINFO("_DELAY_MS", 18, AP_GPS, _delay_ms[0], 0), #if GPS_MAX_RECEIVERS > 1 // @Param: _DELAY_MS2 // @DisplayName: GPS 2 delay in milliseconds // @Description: Controls the amount of GPS measurement delay that the autopilot compensates for. Set to zero to use the default delay for the detected GPS type. // @Units: ms // @Range: 0 250 // @User: Advanced // @RebootRequired: True AP_GROUPINFO("_DELAY_MS2", 19, AP_GPS, _delay_ms[1], 0), #endif #if defined(GPS_BLENDED_INSTANCE) // @Param: _BLEND_MASK // @DisplayName: Multi GPS Blending Mask // @Description: Determines which of the accuracy measures Horizontal position, Vertical Position and Speed are used to calculate the weighting on each GPS receiver when soft switching has been selected by setting GPS_AUTO_SWITCH to 2(Blend) // @Bitmask: 0:Horiz Pos,1:Vert Pos,2:Speed // @User: Advanced AP_GROUPINFO("_BLEND_MASK", 20, AP_GPS, _blend_mask, 5), // @Param: _BLEND_TC // @DisplayName: Blending time constant // @Description: Controls the slowest time constant applied to the calculation of GPS position and height offsets used to adjust different GPS receivers for steady state position differences. // @Units: s // @Range: 5.0 30.0 // @User: Advanced AP_GROUPINFO("_BLEND_TC", 21, AP_GPS, _blend_tc, 10.0f), #endif #if GPS_MOVING_BASELINE // @Param: _DRV_OPTIONS // @DisplayName: driver options // @Description: Additional backend specific options // @Bitmask: 0:Use UART2 for moving baseline on ublox,1:Use base station for GPS yaw on SBF // @User: Advanced AP_GROUPINFO("_DRV_OPTIONS", 22, AP_GPS, _driver_options, 0), #endif // @Param: _COM_PORT // @DisplayName: GPS physical COM port // @Description: The physical COM port on the connected device, currently only applies to SBF GPS // @Range: 0 10 // @Increment: 1 // @User: Advanced // @RebootRequired: True AP_GROUPINFO("_COM_PORT", 23, AP_GPS, _com_port[0], HAL_GPS_COM_PORT_DEFAULT), #if GPS_MAX_RECEIVERS > 1 // @Param: _COM_PORT2 // @DisplayName: GPS physical COM port // @Description: The physical COM port on the connected device, currently only applies to SBF GPS // @Range: 0 10 // @Increment: 1 // @User: Advanced // @RebootRequired: True AP_GROUPINFO("_COM_PORT2", 24, AP_GPS, _com_port[1], HAL_GPS_COM_PORT_DEFAULT), #endif #if GPS_MOVING_BASELINE // @Group: _MB1_ // @Path: MovingBase.cpp AP_SUBGROUPINFO(mb_params[0], "_MB1_", 25, AP_GPS, MovingBase), #if GPS_MAX_RECEIVERS > 1 // @Group: _MB2_ // @Path: MovingBase.cpp AP_SUBGROUPINFO(mb_params[1], "_MB2_", 26, AP_GPS, MovingBase), #endif // GPS_MAX_RECEIVERS > 1 #endif // GPS_MOVING_BASELINE #if GPS_MAX_RECEIVERS > 1 // @Param: _PRIMARY // @DisplayName: Primary GPS // @Description: This GPS will be used when GPS_AUTO_SWITCH is 0 and used preferentially with GPS_AUTO_SWITCH = 4. // @Increment: 1 // @Values: 0:FirstGPS, 1:SecondGPS // @User: Advanced AP_GROUPINFO("_PRIMARY", 27, AP_GPS, _primary, 0), #endif #if GPS_MAX_RECEIVERS > 1 && HAL_ENABLE_LIBUAVCAN_DRIVERS // @Param: _CAN_NODEID1 // @DisplayName: GPS Node ID 1 // @Description: GPS Node id for discovered first. // @ReadOnly: True // @User: Advanced AP_GROUPINFO("_CAN_NODEID1", 28, AP_GPS, _node_id[0], 0), // @Param: _CAN_NODEID2 // @DisplayName: GPS Node ID 2 // @Description: GPS Node id for discovered second. // @ReadOnly: True // @User: Advanced AP_GROUPINFO("_CAN_NODEID2", 29, AP_GPS, _node_id[1], 0), // @Param: 1_CAN_OVRIDE // @DisplayName: First UAVCAN GPS NODE ID // @Description: GPS Node id for first GPS. If 0 the gps will be automatically selected on first come basis. // @User: Advanced AP_GROUPINFO("1_CAN_OVRIDE", 30, AP_GPS, _override_node_id[0], 0), // @Param: 2_CAN_OVRIDE // @DisplayName: Second UAVCAN GPS NODE ID // @Description: GPS Node id for second GPS. If 0 the gps will be automatically selected on first come basis. // @User: Advanced AP_GROUPINFO("2_CAN_OVRIDE", 31, AP_GPS, _override_node_id[1], 0), #endif AP_GROUPEND }; // constructor AP_GPS::AP_GPS() { static_assert((sizeof(_initialisation_blob) * (CHAR_BIT + 2)) < (4800 * GPS_BAUD_TIME_MS * 1e-3), "GPS initilisation blob is too large to be completely sent before the baud rate changes"); AP_Param::setup_object_defaults(this, var_info); if (_singleton != nullptr) { AP_HAL::panic("AP_GPS must be singleton"); } _singleton = this; } // return true if a specific type of GPS uses a UART bool AP_GPS::needs_uart(GPS_Type type) const { switch (type) { case GPS_TYPE_NONE: case GPS_TYPE_HIL: case GPS_TYPE_UAVCAN: case GPS_TYPE_MAV: case GPS_TYPE_MSP: case GPS_TYPE_EXTERNAL_AHRS: return false; default: break; } return true; } /// Startup initialisation. void AP_GPS::init(const AP_SerialManager& serial_manager) { // Set new primary param based on old auto_switch use second option if ((_auto_switch.get() == 3) && !_primary.configured()) { _primary.set_and_save(1); _auto_switch.set_and_save(0); } // search for serial ports with gps protocol uint8_t uart_idx = 0; for (uint8_t i=0; i GPS_MAX_RATE_MS) { _rate_ms[i] = GPS_MAX_RATE_MS; } } } // return number of active GPS sensors. Note that if the first GPS // is not present but the 2nd is then we return 2. Note that a blended // GPS solution is treated as an additional sensor. uint8_t AP_GPS::num_sensors(void) const { if (!_output_is_blended) { return num_instances; } else { return num_instances+1; } } bool AP_GPS::speed_accuracy(uint8_t instance, float &sacc) const { if (state[instance].have_speed_accuracy) { sacc = state[instance].speed_accuracy; return true; } return false; } bool AP_GPS::horizontal_accuracy(uint8_t instance, float &hacc) const { if (state[instance].have_horizontal_accuracy) { hacc = state[instance].horizontal_accuracy; return true; } return false; } bool AP_GPS::vertical_accuracy(uint8_t instance, float &vacc) const { if (state[instance].have_vertical_accuracy) { vacc = state[instance].vertical_accuracy; return true; } return false; } /** convert GPS week and milliseconds to unix epoch in milliseconds */ uint64_t AP_GPS::time_epoch_convert(uint16_t gps_week, uint32_t gps_ms) { uint64_t fix_time_ms = UNIX_OFFSET_MSEC + gps_week * AP_MSEC_PER_WEEK + gps_ms; return fix_time_ms; } /** calculate current time since the unix epoch in microseconds */ uint64_t AP_GPS::time_epoch_usec(uint8_t instance) const { const GPS_State &istate = state[instance]; if (istate.last_gps_time_ms == 0 || istate.time_week == 0) { return 0; } uint64_t fix_time_ms = time_epoch_convert(istate.time_week, istate.time_week_ms); // add in the milliseconds since the last fix return (fix_time_ms + (AP_HAL::millis() - istate.last_gps_time_ms)) * 1000ULL; } /* send some more initialisation string bytes if there is room in the UART transmit buffer */ void AP_GPS::send_blob_start(uint8_t instance, const char *_blob, uint16_t size) { initblob_state[instance].blob = _blob; initblob_state[instance].remaining = size; } /* send some more initialisation string bytes if there is room in the UART transmit buffer */ void AP_GPS::send_blob_update(uint8_t instance) { // exit immediately if no uart for this instance if (_port[instance] == nullptr) { return; } // see if we can write some more of the initialisation blob if (initblob_state[instance].remaining > 0) { int16_t space = _port[instance]->txspace(); if (space > (int16_t)initblob_state[instance].remaining) { space = initblob_state[instance].remaining; } while (space > 0) { _port[instance]->write(*initblob_state[instance].blob); initblob_state[instance].blob++; space--; initblob_state[instance].remaining--; } } } /* run detection step for one GPS instance. If this finds a GPS then it will fill in drivers[instance] and change state[instance].status from NO_GPS to NO_FIX. */ void AP_GPS::detect_instance(uint8_t instance) { AP_GPS_Backend *new_gps = nullptr; struct detect_state *dstate = &detect_state[instance]; const uint32_t now = AP_HAL::millis(); state[instance].status = NO_GPS; state[instance].hdop = GPS_UNKNOWN_DOP; state[instance].vdop = GPS_UNKNOWN_DOP; switch (_type[instance]) { // user has to explicitly set the MAV type, do not use AUTO // do not try to detect the MAV type, assume it's there case GPS_TYPE_MAV: #ifndef HAL_BUILD_AP_PERIPH dstate->auto_detected_baud = false; // specified, not detected new_gps = new AP_GPS_MAV(*this, state[instance], nullptr); goto found_gps; #endif break; // user has to explicitly set the UAVCAN type, do not use AUTO case GPS_TYPE_UAVCAN: #if HAL_ENABLE_LIBUAVCAN_DRIVERS dstate->auto_detected_baud = false; // specified, not detected new_gps = AP_GPS_UAVCAN::probe(*this, state[instance]); goto found_gps; #endif return; // We don't do anything here if UAVCAN is not supported #if HAL_MSP_GPS_ENABLED case GPS_TYPE_MSP: dstate->auto_detected_baud = false; // specified, not detected new_gps = new AP_GPS_MSP(*this, state[instance], nullptr); goto found_gps; #endif #if HAL_EXTERNAL_AHRS_ENABLED case GPS_TYPE_EXTERNAL_AHRS: dstate->auto_detected_baud = false; // specified, not detected new_gps = new AP_GPS_ExternalAHRS(*this, state[instance], nullptr); goto found_gps; #endif default: break; } if (_port[instance] == nullptr) { // UART not available return; } // all remaining drivers automatically cycle through baud rates to detect // the correct baud rate, and should have the selected baud broadcast dstate->auto_detected_baud = true; // don't build the less common GPS drivers on F1 AP_Periph #if !defined(HAL_BUILD_AP_PERIPH) || !defined(STM32F1) switch (_type[instance]) { // by default the sbf/trimble gps outputs no data on its port, until configured. case GPS_TYPE_SBF: new_gps = new AP_GPS_SBF(*this, state[instance], _port[instance]); break; case GPS_TYPE_GSOF: new_gps = new AP_GPS_GSOF(*this, state[instance], _port[instance]); break; case GPS_TYPE_NOVA: new_gps = new AP_GPS_NOVA(*this, state[instance], _port[instance]); break; default: break; } #endif // HAL_BUILD_AP_PERIPH if (now - dstate->last_baud_change_ms > GPS_BAUD_TIME_MS) { // try the next baud rate // incrementing like this will skip the first element in array of bauds // this is okay, and relied upon dstate->current_baud++; if (dstate->current_baud == ARRAY_SIZE(_baudrates)) { dstate->current_baud = 0; } uint32_t baudrate = _baudrates[dstate->current_baud]; _port[instance]->begin(baudrate); _port[instance]->set_flow_control(AP_HAL::UARTDriver::FLOW_CONTROL_DISABLE); dstate->last_baud_change_ms = now; if (_auto_config == GPS_AUTO_CONFIG_ENABLE && new_gps == nullptr) { if (_type[instance] == GPS_TYPE_HEMI) { send_blob_start(instance, AP_GPS_NMEA_HEMISPHERE_INIT_STRING, strlen(AP_GPS_NMEA_HEMISPHERE_INIT_STRING)); } else if ((_type[instance] == GPS_TYPE_UBLOX_RTK_BASE || _type[instance] == GPS_TYPE_UBLOX_RTK_ROVER) && ((_driver_options.get() & AP_GPS_Backend::DriverOptions::UBX_MBUseUart2) == 0)) { // we use 460800 when doing moving baseline as we need // more bandwidth. We don't do this if using UART2, as // in that case the RTCMv3 data doesn't go over the // link to the flight controller static const char blob[] = UBLOX_SET_BINARY_460800; send_blob_start(instance, blob, sizeof(blob)); } else { send_blob_start(instance, _initialisation_blob, sizeof(_initialisation_blob)); } } } if (_auto_config == GPS_AUTO_CONFIG_ENABLE && new_gps == nullptr) { send_blob_update(instance); } while (initblob_state[instance].remaining == 0 && _port[instance]->available() > 0 && new_gps == nullptr) { uint8_t data = _port[instance]->read(); /* running a uBlox at less than 38400 will lead to packet corruption, as we can't receive the packets in the 200ms window for 5Hz fixes. The NMEA startup message should force the uBlox into 230400 no matter what rate it is configured for. */ if ((_type[instance] == GPS_TYPE_AUTO || _type[instance] == GPS_TYPE_UBLOX) && ((!_auto_config && _baudrates[dstate->current_baud] >= 38400) || _baudrates[dstate->current_baud] == 230400) && AP_GPS_UBLOX::_detect(dstate->ublox_detect_state, data)) { new_gps = new AP_GPS_UBLOX(*this, state[instance], _port[instance], GPS_ROLE_NORMAL); } const uint32_t ublox_mb_required_baud = (_driver_options.get() & AP_GPS_Backend::DriverOptions::UBX_MBUseUart2)?230400:460800; if ((_type[instance] == GPS_TYPE_UBLOX_RTK_BASE || _type[instance] == GPS_TYPE_UBLOX_RTK_ROVER) && _baudrates[dstate->current_baud] == ublox_mb_required_baud && AP_GPS_UBLOX::_detect(dstate->ublox_detect_state, data)) { GPS_Role role; if (_type[instance] == GPS_TYPE_UBLOX_RTK_BASE) { role = GPS_ROLE_MB_BASE; } else { role = GPS_ROLE_MB_ROVER; } new_gps = new AP_GPS_UBLOX(*this, state[instance], _port[instance], role); } #ifndef HAL_BUILD_AP_PERIPH #if !HAL_MINIMIZE_FEATURES // we drop the MTK drivers when building a small build as they are so rarely used // and are surprisingly large else if ((_type[instance] == GPS_TYPE_AUTO || _type[instance] == GPS_TYPE_MTK19) && AP_GPS_MTK19::_detect(dstate->mtk19_detect_state, data)) { new_gps = new AP_GPS_MTK19(*this, state[instance], _port[instance]); } else if ((_type[instance] == GPS_TYPE_AUTO || _type[instance] == GPS_TYPE_MTK) && AP_GPS_MTK::_detect(dstate->mtk_detect_state, data)) { new_gps = new AP_GPS_MTK(*this, state[instance], _port[instance]); } #endif else if ((_type[instance] == GPS_TYPE_AUTO || _type[instance] == GPS_TYPE_SBP) && AP_GPS_SBP2::_detect(dstate->sbp2_detect_state, data)) { new_gps = new AP_GPS_SBP2(*this, state[instance], _port[instance]); } else if ((_type[instance] == GPS_TYPE_AUTO || _type[instance] == GPS_TYPE_SBP) && AP_GPS_SBP::_detect(dstate->sbp_detect_state, data)) { new_gps = new AP_GPS_SBP(*this, state[instance], _port[instance]); } #if !HAL_MINIMIZE_FEATURES else if ((_type[instance] == GPS_TYPE_AUTO || _type[instance] == GPS_TYPE_SIRF) && AP_GPS_SIRF::_detect(dstate->sirf_detect_state, data)) { new_gps = new AP_GPS_SIRF(*this, state[instance], _port[instance]); } #endif else if ((_type[instance] == GPS_TYPE_AUTO || _type[instance] == GPS_TYPE_ERB) && AP_GPS_ERB::_detect(dstate->erb_detect_state, data)) { new_gps = new AP_GPS_ERB(*this, state[instance], _port[instance]); } else if ((_type[instance] == GPS_TYPE_NMEA || _type[instance] == GPS_TYPE_HEMI || _type[instance] == GPS_TYPE_ALLYSTAR) && AP_GPS_NMEA::_detect(dstate->nmea_detect_state, data)) { new_gps = new AP_GPS_NMEA(*this, state[instance], _port[instance]); } #endif // HAL_BUILD_AP_PERIPH if (new_gps) { goto found_gps; } } found_gps: if (new_gps != nullptr) { state[instance].status = NO_FIX; drivers[instance] = new_gps; timing[instance].last_message_time_ms = now; timing[instance].delta_time_ms = GPS_TIMEOUT_MS; new_gps->broadcast_gps_type(); } } AP_GPS::GPS_Status AP_GPS::highest_supported_status(uint8_t instance) const { if (instance < GPS_MAX_RECEIVERS && drivers[instance] != nullptr) { return drivers[instance]->highest_supported_status(); } return AP_GPS::GPS_OK_FIX_3D; } bool AP_GPS::should_log() const { #if HAL_LOGGING_ENABLED AP_Logger *logger = AP_Logger::get_singleton(); if (logger == nullptr) { return false; } if (_log_gps_bit == (uint32_t)-1) { return false; } if (!logger->should_log(_log_gps_bit)) { return false; } return true; #else return false; #endif } /* update one GPS instance. This should be called at 10Hz or greater */ void AP_GPS::update_instance(uint8_t instance) { if (_type[instance] == GPS_TYPE_HIL) { // in HIL, leave info alone return; } if (_type[instance] == GPS_TYPE_NONE) { // not enabled state[instance].status = NO_GPS; state[instance].hdop = GPS_UNKNOWN_DOP; state[instance].vdop = GPS_UNKNOWN_DOP; return; } if (locked_ports & (1U<read(); uint32_t tnow = AP_HAL::millis(); // if we did not get a message, and the idle timer of 2 seconds // has expired, re-initialise the GPS. This will cause GPS // detection to run again bool data_should_be_logged = false; if (!result) { if (tnow - timing[instance].last_message_time_ms > GPS_TIMEOUT_MS) { memset((void *)&state[instance], 0, sizeof(state[instance])); state[instance].instance = instance; state[instance].hdop = GPS_UNKNOWN_DOP; state[instance].vdop = GPS_UNKNOWN_DOP; timing[instance].last_message_time_ms = tnow; timing[instance].delta_time_ms = GPS_TIMEOUT_MS; // do not try to detect again if type is MAV or UAVCAN if (_type[instance] == GPS_TYPE_MAV || _type[instance] == GPS_TYPE_UAVCAN) { state[instance].status = NO_FIX; } else { // free the driver before we run the next detection, so we // don't end up with two allocated at any time delete drivers[instance]; drivers[instance] = nullptr; state[instance].status = NO_GPS; } // log this data as a "flag" that the GPS is no longer // valid (see PR#8144) data_should_be_logged = true; } } else { if (state[instance].uart_timestamp_ms != 0) { // set the timestamp for this messages based on // set_uart_timestamp() in backend, if available tnow = state[instance].uart_timestamp_ms; state[instance].uart_timestamp_ms = 0; } // delta will only be correct after parsing two messages timing[instance].delta_time_ms = tnow - timing[instance].last_message_time_ms; timing[instance].last_message_time_ms = tnow; // if GPS disabled for flight testing then don't update fix timing value if (state[instance].status >= GPS_OK_FIX_2D && !_force_disable_gps) { timing[instance].last_fix_time_ms = tnow; } data_should_be_logged = true; } #if GPS_MAX_RECEIVERS > 1 if (drivers[instance] && _type[instance] == GPS_TYPE_UBLOX_RTK_BASE) { // see if a moving baseline base has some RTCMv3 data // which we need to pass along to the rover const uint8_t *rtcm_data; uint16_t rtcm_len; if (drivers[instance]->get_RTCMV3(rtcm_data, rtcm_len)) { for (uint8_t i=0; i< GPS_MAX_RECEIVERS; i++) { if (i != instance && _type[i] == GPS_TYPE_UBLOX_RTK_ROVER) { // pass the data to the rover inject_data(i, rtcm_data, rtcm_len); drivers[instance]->clear_RTCMV3(); break; } } } } #endif if (data_should_be_logged) { // keep count of delayed frames and average frame delay for health reporting const uint16_t gps_max_delta_ms = 245; // 200 ms (5Hz) + 45 ms buffer GPS_timing &t = timing[instance]; if (t.delta_time_ms > gps_max_delta_ms) { t.delayed_count++; } else { t.delayed_count = 0; } if (t.delta_time_ms < 2000) { if (t.average_delta_ms <= 0) { t.average_delta_ms = t.delta_time_ms; } else { t.average_delta_ms = 0.98f * t.average_delta_ms + 0.02f * t.delta_time_ms; } } } #if HAL_LOGGING_ENABLED if (data_should_be_logged && should_log()) { Write_GPS(instance); } #endif #ifndef HAL_BUILD_AP_PERIPH if (state[instance].status >= GPS_OK_FIX_3D) { const uint64_t now = time_epoch_usec(instance); if (now != 0) { AP::rtc().set_utc_usec(now, AP_RTC::SOURCE_GPS); } } #else (void)data_should_be_logged; #endif } /* update all GPS instances */ void AP_GPS::update(void) { WITH_SEMAPHORE(rsem); for (uint8_t i=0; i 0) { _blend_health_counter--; } // stop blending if unhealthy if (_blend_health_counter >= 50) { _output_is_blended = false; } } else { _output_is_blended = false; _blend_health_counter = 0; } if (_output_is_blended) { // Use the weighting to calculate blended GPS states calc_blended_state(); // set primary to the virtual instance primary_instance = GPS_BLENDED_INSTANCE; return; } // check the primary param is set to possible GPS int8_t primary_param = _primary.get(); if ((primary_param < 0) || (primary_param>=GPS_MAX_RECEIVERS)) { primary_param = 0; } // if primary is not enabled try first instance if (get_type(primary_param) == GPS_TYPE_NONE) { primary_param = 0; } if ((GPSAutoSwitch)_auto_switch.get() == GPSAutoSwitch::NONE) { // No switching of GPSs, always use the primary instance primary_instance = primary_param; return; } uint32_t now = AP_HAL::millis(); // special handling of RTK moving baseline pair. Always use the // base as the rover position is derived from the base, which // means the rover always has worse position and velocity than the // base. This overrides the normal logic which would select the // rover as it typically is in fix type 6 (RTK) whereas base is // usually fix type 3 for (uint8_t i=0; i= GPS_OK_FIX_3D) || (state[i].status >= state[i^1].status))) { if (primary_instance != i) { _last_instance_swap_ms = now; primary_instance = i; } // don't do any more switching logic. We don't want the // RTK status of the rover to cause a switch return; } } // handling switching away from blended GPS if (primary_instance == GPS_BLENDED_INSTANCE) { primary_instance = 0; for (uint8_t i=1; i state[primary_instance].status) || ((state[i].status == state[primary_instance].status) && (state[i].num_sats > state[primary_instance].num_sats))) { primary_instance = i; _last_instance_swap_ms = now; } } return; } // Use primary if 3D fix or better if (((GPSAutoSwitch)_auto_switch.get() == GPSAutoSwitch::USE_PRIMARY_IF_3D_FIX) && (state[primary_param].status >= GPS_OK_FIX_3D)) { // Primary GPS has a least a 3D fix, switch to it if necessary if (primary_instance != primary_param) { primary_instance = primary_param; _last_instance_swap_ms = now; } return; } // handle switch between real GPSs for (uint8_t i=0; i state[primary_instance].status) { // we have a higher status lock, or primary is set to the blended GPS, change GPS primary_instance = i; _last_instance_swap_ms = now; continue; } bool another_gps_has_1_or_more_sats = (state[i].num_sats >= state[primary_instance].num_sats + 1); if (state[i].status == state[primary_instance].status && another_gps_has_1_or_more_sats) { bool another_gps_has_2_or_more_sats = (state[i].num_sats >= state[primary_instance].num_sats + 2); if ((another_gps_has_1_or_more_sats && (now - _last_instance_swap_ms) >= 20000) || (another_gps_has_2_or_more_sats && (now - _last_instance_swap_ms) >= 5000)) { // this GPS has more satellites than the // current primary, switch primary. Once we switch we will // then tend to stick to the new GPS as primary. We don't // want to switch too often as it will look like a // position shift to the controllers. primary_instance = i; _last_instance_swap_ms = now; } } } #endif // GPS_BLENDED_INSTANCE } void AP_GPS::handle_gps_inject(const mavlink_message_t &msg) { mavlink_gps_inject_data_t packet; mavlink_msg_gps_inject_data_decode(&msg, &packet); if (packet.len > sizeof(packet.data)) { // invalid packet return; } handle_gps_rtcm_fragment(0, packet.data, packet.len); } /* pass along a mavlink message (for MAV type) */ void AP_GPS::handle_msg(const mavlink_message_t &msg) { switch (msg.msgid) { case MAVLINK_MSG_ID_GPS_RTCM_DATA: // pass data to de-fragmenter handle_gps_rtcm_data(msg); break; case MAVLINK_MSG_ID_GPS_INJECT_DATA: handle_gps_inject(msg); break; default: { uint8_t i; for (i=0; ihandle_msg(msg); } } break; } } } #if HAL_MSP_GPS_ENABLED void AP_GPS::handle_msp(const MSP::msp_gps_data_message_t &pkt) { for (uint8_t i=0; ihandle_msp(pkt); } } } #endif // HAL_MSP_GPS_ENABLED #if HAL_EXTERNAL_AHRS_ENABLED void AP_GPS::handle_external(const AP_ExternalAHRS::gps_data_message_t &pkt) { for (uint8_t i=0; ihandle_external(pkt); } } } #endif // HAL_EXTERNAL_AHRS_ENABLED /** Lock a GPS port, preventing the GPS driver from using it. This can be used to allow a user to control a GPS port via the SERIAL_CONTROL protocol */ void AP_GPS::lock_port(uint8_t instance, bool lock) { if (instance >= GPS_MAX_RECEIVERS) { return; } if (lock) { locked_ports |= (1U<inject_data(data, len); } } /* get GPS yaw following mavlink GPS_RAW_INT and GPS2_RAW convention. We return 0 if the GPS is not configured to provide yaw. We return 65535 for a GPS configured to provide yaw that can't currently provide it. We return from 1 to 36000 for yaw otherwise */ uint16_t AP_GPS::gps_yaw_cdeg(uint8_t instance) const { if (!have_gps_yaw_configured(instance)) { return 0; } float yaw_deg, accuracy_deg; uint32_t time_ms; if (!gps_yaw_deg(instance, yaw_deg, accuracy_deg, time_ms)) { return 65535; } int yaw_cd = wrap_360_cd(yaw_deg * 100); if (yaw_cd == 0) { return 36000; } return yaw_cd; } void AP_GPS::send_mavlink_gps_raw(mavlink_channel_t chan) { const Location &loc = location(0); float hacc = 0.0f; float vacc = 0.0f; float sacc = 0.0f; horizontal_accuracy(0, hacc); vertical_accuracy(0, vacc); speed_accuracy(0, sacc); mavlink_msg_gps_raw_int_send( chan, last_fix_time_ms(0)*(uint64_t)1000, status(0), loc.lat, // in 1E7 degrees loc.lng, // in 1E7 degrees loc.alt * 10UL, // in mm get_hdop(0), get_vdop(0), ground_speed(0)*100, // cm/s ground_course(0)*100, // 1/100 degrees, num_sats(0), 0, // TODO: Elipsoid height in mm hacc * 1000, // one-sigma standard deviation in mm vacc * 1000, // one-sigma standard deviation in mm sacc * 1000, // one-sigma standard deviation in mm/s 0, // TODO one-sigma heading accuracy standard deviation gps_yaw_cdeg(0)); } #if GPS_MAX_RECEIVERS > 1 void AP_GPS::send_mavlink_gps2_raw(mavlink_channel_t chan) { // always send the message if 2nd GPS is configured if (_type[1] == GPS_TYPE_NONE) { return; } const Location &loc = location(1); float hacc = 0.0f; float vacc = 0.0f; float sacc = 0.0f; horizontal_accuracy(1, hacc); vertical_accuracy(1, vacc); speed_accuracy(1, sacc); mavlink_msg_gps2_raw_send( chan, last_fix_time_ms(1)*(uint64_t)1000, status(1), loc.lat, loc.lng, loc.alt * 10UL, get_hdop(1), get_vdop(1), ground_speed(1)*100, // cm/s ground_course(1)*100, // 1/100 degrees, num_sats(1), state[1].rtk_num_sats, state[1].rtk_age_ms, gps_yaw_cdeg(1), 0, // TODO: Elipsoid height in mm hacc * 1000, // one-sigma standard deviation in mm vacc * 1000, // one-sigma standard deviation in mm sacc * 1000, // one-sigma standard deviation in mm/s 0); // TODO one-sigma heading accuracy standard deviation } #endif // GPS_MAX_RECEIVERS void AP_GPS::send_mavlink_gps_rtk(mavlink_channel_t chan, uint8_t inst) { if (inst >= GPS_MAX_RECEIVERS) { return; } if (drivers[inst] != nullptr && drivers[inst]->supports_mavlink_gps_rtk_message()) { drivers[inst]->send_mavlink_gps_rtk(chan); } } bool AP_GPS::first_unconfigured_gps(uint8_t &instance) const { for (int i = 0; i < GPS_MAX_RECEIVERS; i++) { if (_type[i] != GPS_TYPE_NONE && (drivers[i] == nullptr || !drivers[i]->is_configured())) { instance = i; return true; } } return false; } void AP_GPS::broadcast_first_configuration_failure_reason(void) const { uint8_t unconfigured; if (first_unconfigured_gps(unconfigured)) { if (drivers[unconfigured] == nullptr) { GCS_SEND_TEXT(MAV_SEVERITY_INFO, "GPS %d: was not found", unconfigured + 1); } else { drivers[unconfigured]->broadcast_configuration_failure_reason(); } } } // pre-arm check that all GPSs are close to each other. farthest distance between GPSs (in meters) is returned bool AP_GPS::all_consistent(float &distance) const { // return true immediately if only one valid receiver if (num_instances <= 1 || drivers[0] == nullptr || _type[0] == GPS_TYPE_NONE) { distance = 0; return true; } // calculate distance distance = state[0].location.get_distance_NED(state[1].location).length(); // success if distance is within 50m return (distance < 50); } // pre-arm check of GPS blending. True means healthy or that blending is not being used bool AP_GPS::blend_health_check() const { return (_blend_health_counter < 50); } /* re-assemble fragmented RTCM data */ void AP_GPS::handle_gps_rtcm_fragment(uint8_t flags, const uint8_t *data, uint8_t len) { if ((flags & 1) == 0) { // it is not fragmented, pass direct inject_data(data, len); return; } // see if we need to allocate re-assembly buffer if (rtcm_buffer == nullptr) { rtcm_buffer = (struct rtcm_buffer *)calloc(1, sizeof(*rtcm_buffer)); if (rtcm_buffer == nullptr) { // nothing to do but discard the data return; } } const uint8_t fragment = (flags >> 1U) & 0x03; const uint8_t sequence = (flags >> 3U) & 0x1F; // see if this fragment is consistent with existing fragments if (rtcm_buffer->fragments_received && (rtcm_buffer->sequence != sequence || (rtcm_buffer->fragments_received & (1U<fragment_count = 0; rtcm_buffer->fragments_received = 0; } // add this fragment rtcm_buffer->sequence = sequence; rtcm_buffer->fragments_received |= (1U << fragment); // copy the data memcpy(&rtcm_buffer->buffer[MAVLINK_MSG_GPS_RTCM_DATA_FIELD_DATA_LEN*(uint16_t)fragment], data, len); // when we get a fragment of less than max size then we know the // number of fragments. Note that this means if you want to send a // block of RTCM data of an exact multiple of the buffer size you // need to send a final packet of zero length if (len < MAVLINK_MSG_GPS_RTCM_DATA_FIELD_DATA_LEN) { rtcm_buffer->fragment_count = fragment+1; rtcm_buffer->total_length = (MAVLINK_MSG_GPS_RTCM_DATA_FIELD_DATA_LEN*fragment) + len; } else if (rtcm_buffer->fragments_received == 0x0F) { // special case of 4 full fragments rtcm_buffer->fragment_count = 4; rtcm_buffer->total_length = MAVLINK_MSG_GPS_RTCM_DATA_FIELD_DATA_LEN*4; } // see if we have all fragments if (rtcm_buffer->fragment_count != 0 && rtcm_buffer->fragments_received == (1U << rtcm_buffer->fragment_count) - 1) { // we have them all, inject inject_data(rtcm_buffer->buffer, rtcm_buffer->total_length); rtcm_buffer->fragment_count = 0; rtcm_buffer->fragments_received = 0; } } /* re-assemble GPS_RTCM_DATA message */ void AP_GPS::handle_gps_rtcm_data(const mavlink_message_t &msg) { mavlink_gps_rtcm_data_t packet; mavlink_msg_gps_rtcm_data_decode(&msg, &packet); if (packet.len > sizeof(packet.data)) { // invalid packet return; } handle_gps_rtcm_fragment(packet.flags, packet.data, packet.len); } void AP_GPS::Write_AP_Logger_Log_Startup_messages() { for (uint8_t instance=0; instanceWrite_AP_Logger_Log_Startup_messages(); } } /* return the expected lag (in seconds) in the position and velocity readings from the gps return true if the GPS hardware configuration is known or the delay parameter has been set */ bool AP_GPS::get_lag(uint8_t instance, float &lag_sec) const { // always enusre a lag is provided lag_sec = 0.22f; if (instance >= GPS_MAX_INSTANCES) { return false; } #if defined(GPS_BLENDED_INSTANCE) // return lag of blended GPS if (instance == GPS_BLENDED_INSTANCE) { lag_sec = _blended_lag_sec; // auto switching uses all GPS receivers, so all must be configured uint8_t inst; // we don't actually care what the number is, but must pass it return first_unconfigured_gps(inst); } #endif if (_delay_ms[instance] > 0) { // if the user has specified a non zero time delay, always return that value lag_sec = 0.001f * (float)_delay_ms[instance]; // the user is always right !! return true; } else if (drivers[instance] == nullptr || state[instance].status == NO_GPS) { // no GPS was detected in this instance so return the worst possible lag term if (_type[instance] == GPS_TYPE_NONE) { lag_sec = 0.0f; return true; } return _type[instance] == GPS_TYPE_AUTO; } else { // the user has not specified a delay so we determine it from the GPS type return drivers[instance]->get_lag(lag_sec); } } // return a 3D vector defining the offset of the GPS antenna in meters relative to the body frame origin const Vector3f &AP_GPS::get_antenna_offset(uint8_t instance) const { if (instance >= GPS_MAX_INSTANCES) { // we have to return a reference so use instance 0 return _antenna_offset[0]; } #if defined(GPS_BLENDED_INSTANCE) if (instance == GPS_BLENDED_INSTANCE) { // return an offset for the blended GPS solution return _blended_antenna_offset; } #endif return _antenna_offset[instance]; } /* returns the desired gps update rate in milliseconds this does not provide any guarantee that the GPS is updating at the requested rate it is simply a helper for use in the backends for determining what rate they should be configuring the GPS to run at */ uint16_t AP_GPS::get_rate_ms(uint8_t instance) const { // sanity check if (instance >= num_instances || _rate_ms[instance] <= 0) { return GPS_MAX_RATE_MS; } return MIN(_rate_ms[instance], GPS_MAX_RATE_MS); } #if defined(GPS_BLENDED_INSTANCE) /* calculate the weightings used to blend GPSs location and velocity data */ bool AP_GPS::calc_blend_weights(void) { // zero the blend weights memset(&_blend_weights, 0, sizeof(_blend_weights)); static_assert(GPS_MAX_RECEIVERS == 2, "GPS blending only currently works with 2 receivers"); // Note that the early quit below relies upon exactly 2 instances // The time delta calculations below also rely upon every instance being currently detected and being parsed // exit immediately if not enough receivers to do blending if (state[0].status <= NO_FIX || state[1].status <= NO_FIX) { return false; } // Use the oldest non-zero time, but if time difference is excessive, use newest to prevent a disconnected receiver from blocking updates uint32_t max_ms = 0; // newest non-zero system time of arrival of a GPS message uint32_t min_ms = -1; // oldest non-zero system time of arrival of a GPS message uint32_t max_rate_ms = 0; // largest update interval of a GPS receiver for (uint8_t i=0; i max_ms) { max_ms = state[i].last_gps_time_ms; } if ((state[i].last_gps_time_ms < min_ms) && (state[i].last_gps_time_ms > 0)) { min_ms = state[i].last_gps_time_ms; } max_rate_ms = MAX(get_rate_ms(i), max_rate_ms); if (isinf(state[i].speed_accuracy) || isinf(state[i].horizontal_accuracy) || isinf(state[i].vertical_accuracy)) { return false; } } if ((max_ms - min_ms) < (2 * max_rate_ms)) { // data is not too delayed so use the oldest time_stamp to give a chance for data from that receiver to be updated state[GPS_BLENDED_INSTANCE].last_gps_time_ms = min_ms; } else { // receiver data has timed out so fail out of blending return false; } // calculate the sum squared speed accuracy across all GPS sensors float speed_accuracy_sum_sq = 0.0f; if (_blend_mask & BLEND_MASK_USE_SPD_ACC) { for (uint8_t i=0; i= GPS_OK_FIX_3D) { if (state[i].have_speed_accuracy && state[i].speed_accuracy > 0.0f) { speed_accuracy_sum_sq += state[i].speed_accuracy * state[i].speed_accuracy; } else { // not all receivers support this metric so set it to zero and don't use it speed_accuracy_sum_sq = 0.0f; break; } } } } // calculate the sum squared horizontal position accuracy across all GPS sensors float horizontal_accuracy_sum_sq = 0.0f; if (_blend_mask & BLEND_MASK_USE_HPOS_ACC) { for (uint8_t i=0; i= GPS_OK_FIX_2D) { if (state[i].have_horizontal_accuracy && state[i].horizontal_accuracy > 0.0f) { horizontal_accuracy_sum_sq += state[i].horizontal_accuracy * state[i].horizontal_accuracy; } else { // not all receivers support this metric so set it to zero and don't use it horizontal_accuracy_sum_sq = 0.0f; break; } } } } // calculate the sum squared vertical position accuracy across all GPS sensors float vertical_accuracy_sum_sq = 0.0f; if (_blend_mask & BLEND_MASK_USE_VPOS_ACC) { for (uint8_t i=0; i= GPS_OK_FIX_3D) { if (state[i].have_vertical_accuracy && state[i].vertical_accuracy > 0.0f) { vertical_accuracy_sum_sq += state[i].vertical_accuracy * state[i].vertical_accuracy; } else { // not all receivers support this metric so set it to zero and don't use it vertical_accuracy_sum_sq = 0.0f; break; } } } } // Check if we can do blending using reported accuracy bool can_do_blending = (horizontal_accuracy_sum_sq > 0.0f || vertical_accuracy_sum_sq > 0.0f || speed_accuracy_sum_sq > 0.0f); // if we can't do blending using reported accuracy, return false and hard switch logic will be used instead if (!can_do_blending) { return false; } float sum_of_all_weights = 0.0f; // calculate a weighting using the reported horizontal position float hpos_blend_weights[GPS_MAX_RECEIVERS] = {}; if (horizontal_accuracy_sum_sq > 0.0f && (_blend_mask & BLEND_MASK_USE_HPOS_ACC)) { // calculate the weights using the inverse of the variances float sum_of_hpos_weights = 0.0f; for (uint8_t i=0; i= GPS_OK_FIX_2D && state[i].horizontal_accuracy >= 0.001f) { hpos_blend_weights[i] = horizontal_accuracy_sum_sq / (state[i].horizontal_accuracy * state[i].horizontal_accuracy); sum_of_hpos_weights += hpos_blend_weights[i]; } } // normalise the weights if (sum_of_hpos_weights > 0.0f) { for (uint8_t i=0; i 0.0f && (_blend_mask & BLEND_MASK_USE_VPOS_ACC)) { // calculate the weights using the inverse of the variances float sum_of_vpos_weights = 0.0f; for (uint8_t i=0; i= GPS_OK_FIX_3D && state[i].vertical_accuracy >= 0.001f) { vpos_blend_weights[i] = vertical_accuracy_sum_sq / (state[i].vertical_accuracy * state[i].vertical_accuracy); sum_of_vpos_weights += vpos_blend_weights[i]; } } // normalise the weights if (sum_of_vpos_weights > 0.0f) { for (uint8_t i=0; i 0.0f && (_blend_mask & BLEND_MASK_USE_SPD_ACC)) { // calculate the weights using the inverse of the variances float sum_of_spd_weights = 0.0f; for (uint8_t i=0; i= GPS_OK_FIX_3D && state[i].speed_accuracy >= 0.001f) { spd_blend_weights[i] = speed_accuracy_sum_sq / (state[i].speed_accuracy * state[i].speed_accuracy); sum_of_spd_weights += spd_blend_weights[i]; } } // normalise the weights if (sum_of_spd_weights > 0.0f) { for (uint8_t i=0; i state[GPS_BLENDED_INSTANCE].status) { state[GPS_BLENDED_INSTANCE].status = state[i].status; } // calculate a blended average velocity state[GPS_BLENDED_INSTANCE].velocity += state[i].velocity * _blend_weights[i]; // report the best valid accuracies and DOP metrics if (state[i].have_horizontal_accuracy && state[i].horizontal_accuracy > 0.0f && state[i].horizontal_accuracy < state[GPS_BLENDED_INSTANCE].horizontal_accuracy) { state[GPS_BLENDED_INSTANCE].have_horizontal_accuracy = true; state[GPS_BLENDED_INSTANCE].horizontal_accuracy = state[i].horizontal_accuracy; } if (state[i].have_vertical_accuracy && state[i].vertical_accuracy > 0.0f && state[i].vertical_accuracy < state[GPS_BLENDED_INSTANCE].vertical_accuracy) { state[GPS_BLENDED_INSTANCE].have_vertical_accuracy = true; state[GPS_BLENDED_INSTANCE].vertical_accuracy = state[i].vertical_accuracy; } if (state[i].have_vertical_velocity) { state[GPS_BLENDED_INSTANCE].have_vertical_velocity = true; } if (state[i].have_speed_accuracy && state[i].speed_accuracy > 0.0f && state[i].speed_accuracy < state[GPS_BLENDED_INSTANCE].speed_accuracy) { state[GPS_BLENDED_INSTANCE].have_speed_accuracy = true; state[GPS_BLENDED_INSTANCE].speed_accuracy = state[i].speed_accuracy; } if (state[i].hdop > 0 && state[i].hdop < state[GPS_BLENDED_INSTANCE].hdop) { state[GPS_BLENDED_INSTANCE].hdop = state[i].hdop; } if (state[i].vdop > 0 && state[i].vdop < state[GPS_BLENDED_INSTANCE].vdop) { state[GPS_BLENDED_INSTANCE].vdop = state[i].vdop; } if (state[i].num_sats > 0 && state[i].num_sats > state[GPS_BLENDED_INSTANCE].num_sats) { state[GPS_BLENDED_INSTANCE].num_sats = state[i].num_sats; } // report a blended average GPS antenna position Vector3f temp_antenna_offset = _antenna_offset[i]; temp_antenna_offset *= _blend_weights[i]; _blended_antenna_offset += temp_antenna_offset; // blend the timing data if (timing[i].last_fix_time_ms > timing[GPS_BLENDED_INSTANCE].last_fix_time_ms) { timing[GPS_BLENDED_INSTANCE].last_fix_time_ms = timing[i].last_fix_time_ms; } if (timing[i].last_message_time_ms > timing[GPS_BLENDED_INSTANCE].last_message_time_ms) { timing[GPS_BLENDED_INSTANCE].last_message_time_ms = timing[i].last_message_time_ms; } } /* * Calculate an instantaneous weighted/blended average location from the available GPS instances and store in the _output_state. * This will be statistically the most likely location, but will be not stable enough for direct use by the autopilot. */ // Use the GPS with the highest weighting as the reference position float best_weight = 0.0f; uint8_t best_index = 0; for (uint8_t i=0; i best_weight) { best_weight = _blend_weights[i]; best_index = i; state[GPS_BLENDED_INSTANCE].location = state[i].location; } } // Calculate the weighted sum of horizontal and vertical position offsets relative to the reference position Vector2f blended_NE_offset_m; float blended_alt_offset_cm = 0.0f; blended_NE_offset_m.zero(); for (uint8_t i=0; i 0.0f && i != best_index) { blended_NE_offset_m += state[GPS_BLENDED_INSTANCE].location.get_distance_NE(state[i].location) * _blend_weights[i]; blended_alt_offset_cm += (float)(state[i].location.alt - state[GPS_BLENDED_INSTANCE].location.alt) * _blend_weights[i]; } } // Add the sum of weighted offsets to the reference location to obtain the blended location state[GPS_BLENDED_INSTANCE].location.offset(blended_NE_offset_m.x, blended_NE_offset_m.y); state[GPS_BLENDED_INSTANCE].location.alt += (int)blended_alt_offset_cm; // Calculate ground speed and course from blended velocity vector state[GPS_BLENDED_INSTANCE].ground_speed = norm(state[GPS_BLENDED_INSTANCE].velocity.x, state[GPS_BLENDED_INSTANCE].velocity.y); state[GPS_BLENDED_INSTANCE].ground_course = wrap_360(degrees(atan2f(state[GPS_BLENDED_INSTANCE].velocity.y, state[GPS_BLENDED_INSTANCE].velocity.x))); // If the GPS week is the same then use a blended time_week_ms // If week is different, then use time stamp from GPS with largest weighting // detect inconsistent week data uint8_t last_week_instance = 0; bool weeks_consistent = true; for (uint8_t i=0; i 0) { // this is our first valid sensor week data last_week_instance = state[i].time_week; } else if (last_week_instance != 0 && _blend_weights[i] > 0 && last_week_instance != state[i].time_week) { // there is valid sensor week data that is inconsistent weeks_consistent = false; } } // calculate output if (!weeks_consistent) { // use data from highest weighted sensor state[GPS_BLENDED_INSTANCE].time_week = state[best_index].time_week; state[GPS_BLENDED_INSTANCE].time_week_ms = state[best_index].time_week_ms; } else { // use week number from highest weighting GPS (they should all have the same week number) state[GPS_BLENDED_INSTANCE].time_week = state[best_index].time_week; // calculate a blended value for the number of ms lapsed in the week double temp_time_0 = 0.0; for (uint8_t i=0; i 0.0f) { temp_time_0 += (double)state[i].time_week_ms * (double)_blend_weights[i]; } } state[GPS_BLENDED_INSTANCE].time_week_ms = (uint32_t)temp_time_0; } // calculate a blended value for the timing data and lag double temp_time_1 = 0.0; double temp_time_2 = 0.0; for (uint8_t i=0; i 0.0f) { temp_time_1 += (double)timing[i].last_fix_time_ms * (double) _blend_weights[i]; temp_time_2 += (double)timing[i].last_message_time_ms * (double)_blend_weights[i]; float gps_lag_sec = 0; get_lag(i, gps_lag_sec); _blended_lag_sec += gps_lag_sec * _blend_weights[i]; } } timing[GPS_BLENDED_INSTANCE].last_fix_time_ms = (uint32_t)temp_time_1; timing[GPS_BLENDED_INSTANCE].last_message_time_ms = (uint32_t)temp_time_2; #if HAL_LOGGING_ENABLED if (timing[GPS_BLENDED_INSTANCE].last_message_time_ms > last_blended_message_time_ms && should_log()) { Write_GPS(GPS_BLENDED_INSTANCE); } #endif } #endif // GPS_BLENDED_INSTANCE bool AP_GPS::is_healthy(uint8_t instance) const { if (instance >= GPS_MAX_INSTANCES) { return false; } if (get_type(_primary.get()) == GPS_TYPE_NONE) { return false; } /* allow two lost frames before declaring the GPS unhealthy, but require the average frame rate to be close to 5Hz. We allow for a bit higher average for a rover due to the packet loss that happens with the RTCMv3 data */ const uint8_t delay_threshold = 2; const float delay_avg_max = _type[instance] == GPS_TYPE_UBLOX_RTK_ROVER?245:215; const GPS_timing &t = timing[instance]; bool delay_ok = (t.delayed_count < delay_threshold) && t.average_delta_ms < delay_avg_max && state[instance].lagged_sample_count < 5; #if defined(GPS_BLENDED_INSTANCE) if (instance == GPS_BLENDED_INSTANCE) { return delay_ok && blend_health_check(); } #endif return delay_ok && drivers[instance] != nullptr && drivers[instance]->is_healthy(); } bool AP_GPS::prepare_for_arming(void) { bool all_passed = true; for (uint8_t i = 0; i < GPS_MAX_RECEIVERS; i++) { if (drivers[i] != nullptr) { all_passed &= drivers[i]->prepare_for_arming(); } } return all_passed; } bool AP_GPS::backends_healthy(char failure_msg[], uint16_t failure_msg_len) { #if HAL_ENABLE_LIBUAVCAN_DRIVERS for (uint8_t i = 0; i < GPS_MAX_RECEIVERS; i++) { if (_type[i] == GPS_TYPE_UAVCAN) { if (!AP_GPS_UAVCAN::backends_healthy(failure_msg, failure_msg_len)) { return false; } } } #endif return true; } bool AP_GPS::logging_failed(void) const { if (!logging_enabled()) { return false; } for (uint8_t i = 0; i < GPS_MAX_RECEIVERS; i++) { if ((drivers[i] != nullptr) && !(drivers[i]->logging_healthy())) { return true; } } return false; } // get iTOW, if supported, zero otherwie uint32_t AP_GPS::get_itow(uint8_t instance) const { if (instance >= GPS_MAX_RECEIVERS || drivers[instance] == nullptr) { return 0; } return drivers[instance]->get_last_itow(); } bool AP_GPS::get_error_codes(uint8_t instance, uint32_t &error_codes) const { if (instance >= GPS_MAX_RECEIVERS || drivers[instance] == nullptr) { return false; } return drivers[instance]->get_error_codes(error_codes); } // Logging support: // Write an GPS packet void AP_GPS::Write_GPS(uint8_t i) { const uint64_t time_us = AP_HAL::micros64(); const struct Location &loc = location(i); float yaw_deg=0, yaw_accuracy_deg=0; uint32_t yaw_time_ms; gps_yaw_deg(i, yaw_deg, yaw_accuracy_deg, yaw_time_ms); const struct log_GPS pkt { LOG_PACKET_HEADER_INIT(LOG_GPS_MSG), time_us : time_us, instance : i, status : (uint8_t)status(i), gps_week_ms : time_week_ms(i), gps_week : time_week(i), num_sats : num_sats(i), hdop : get_hdop(i), latitude : loc.lat, longitude : loc.lng, altitude : loc.alt, ground_speed : ground_speed(i), ground_course : ground_course(i), vel_z : velocity(i).z, yaw : yaw_deg, used : (uint8_t)(AP::gps().primary_sensor() == i) }; AP::logger().WriteBlock(&pkt, sizeof(pkt)); /* write auxiliary accuracy information as well */ float hacc = 0, vacc = 0, sacc = 0; horizontal_accuracy(i, hacc); vertical_accuracy(i, vacc); speed_accuracy(i, sacc); struct log_GPA pkt2{ LOG_PACKET_HEADER_INIT(LOG_GPA_MSG), time_us : time_us, instance : i, vdop : get_vdop(i), hacc : (uint16_t)MIN((hacc*100), UINT16_MAX), vacc : (uint16_t)MIN((vacc*100), UINT16_MAX), sacc : (uint16_t)MIN((sacc*100), UINT16_MAX), yaw_accuracy : yaw_accuracy_deg, have_vv : (uint8_t)have_vertical_velocity(i), sample_ms : last_message_time_ms(i), delta_ms : last_message_delta_time_ms(i) }; AP::logger().WriteBlock(&pkt2, sizeof(pkt2)); } /* get GPS based yaw */ bool AP_GPS::gps_yaw_deg(uint8_t instance, float &yaw_deg, float &accuracy_deg, uint32_t &time_ms) const { #if GPS_MAX_RECEIVERS > 1 if (instance < GPS_MAX_RECEIVERS && _type[instance] == GPS_TYPE_UBLOX_RTK_BASE && _type[instance^1] == GPS_TYPE_UBLOX_RTK_ROVER) { // return the yaw from the rover instance ^= 1; } #endif if (!have_gps_yaw(instance)) { return false; } yaw_deg = state[instance].gps_yaw; // get lagged timestamp time_ms = state[instance].gps_yaw_time_ms; float lag_s; if (get_lag(instance, lag_s)) { uint32_t lag_ms = lag_s * 1000; time_ms -= lag_ms; } if (state[instance].have_gps_yaw_accuracy) { accuracy_deg = state[instance].gps_yaw_accuracy; } else { // fall back to 10 degrees as a generic default accuracy_deg = 10; } return true; } namespace AP { AP_GPS &gps() { return *AP_GPS::get_singleton(); } };