// User specific config file. Any items listed in config.h can be overridden here. // If you used to define your CONFIG_APM_HARDWARE setting here, it is no longer // valid! You should switch to using a HAL_BOARD flag in your local config.mk. // uncomment the lines below to disable features (flash sizes listed are for APM2 boards and will underestimate savings on Pixhawk and other boards) //#define LOGGING_ENABLED DISABLED // disable logging to save 11K of flash space //#define MOUNT DISABLED // disable the camera gimbal to save 8K of flash space //#define AUTOTUNE_ENABLED DISABLED // disable the auto tune functionality to save 7k of flash //#define AC_FENCE DISABLED // disable fence to save 2k of flash //#define CAMERA DISABLED // disable camera trigger to save 1k of flash //#define RANGEFINDER_ENABLED DISABLED // disable rangefinder to save 1k of flash //#define PROXIMITY_ENABLED DISABLED // disable proximity sensors //#define AC_RALLY DISABLED // disable rally points library (must also disable terrain which relies on rally) //#define AC_AVOID_ENABLED DISABLED // disable stop-at-fence library //#define AC_OAPATHPLANNER_ENABLED DISABLED // disable path planning around obstacles //#define AC_TERRAIN DISABLED // disable terrain library //#define PARACHUTE DISABLED // disable parachute release to save 1k of flash //#define NAV_GUIDED DISABLED // disable external navigation computer ability to control vehicle through MAV_CMD_NAV_GUIDED mission commands //#define OPTFLOW DISABLED // disable optical flow sensor to save 5K of flash space //#define FRSKY_TELEM_ENABLED DISABLED // disable FRSky telemetry //#define ADSB_ENABLED DISABLED // disable ADSB support //#define PRECISION_LANDING DISABLED // disable precision landing using companion computer or IRLock sensor //#define BEACON_ENABLED DISABLED // disable beacon support //#define SPRAYER_ENABLED DISABLED // disable the crop sprayer feature (two ESC controlled pumps the speed of which depends upon the vehicle's horizontal velocity) //#define WINCH_ENABLED DISABLED // disable winch support //#define GRIPPER_ENABLED DISABLED // disable gripper support //#define RPM_ENABLED DISABLED // disable rotations per minute sensor support //#define STATS_ENABLED DISABLED // disable statistics support //#define MODE_ACRO_ENABLED DISABLED // disable acrobatic mode support //#define MODE_AUTO_ENABLED DISABLED // disable auto mode support //#define MODE_BRAKE_ENABLED DISABLED // disable brake mode support //#define MODE_CIRCLE_ENABLED DISABLED // disable circle mode support //#define MODE_DRIFT_ENABLED DISABLED // disable drift mode support //#define MODE_FLIP_ENABLED DISABLED // disable flip mode support //#define MODE_FOLLOW_ENABLED DISABLED // disable follow mode support //#define MODE_GUIDED_ENABLED DISABLED // disable guided mode support //#define MODE_GUIDED_NOGPS_ENABLED DISABLED // disable guided/nogps mode support //#define MODE_LOITER_ENABLED DISABLED // disable loiter mode support //#define MODE_POSHOLD_ENABLED DISABLED // disable poshold mode support //#define MODE_RTL_ENABLED DISABLED // disable rtl mode support //#define MODE_SMARTRTL_ENABLED DISABLED // disable smartrtl mode support //#define MODE_SPORT_ENABLED DISABLED // disable sport mode support //#define MODE_SYSTEMID_ENABLED DISABLED // disable system ID mode support //#define MODE_THROW_ENABLED DISABLED // disable throw mode support //#define MODE_ZIGZAG_ENABLED DISABLED // disable zigzag mode support //#define OSD_ENABLED DISABLED // disable on-screen-display support //#define BUTTON_ENABLED DISABLED // disable button support // features below are disabled by default on all boards //#define CAL_ALWAYS_REBOOT // flight controller will reboot after compass or accelerometer calibration completes //#define DISALLOW_GCS_MODE_CHANGE_DURING_RC_FAILSAFE // disable mode changes from GCS during Radio failsafes. Avoids a race condition for vehicle like Solo in which the RC and telemetry travel along the same link //#define ADVANCED_FAILSAFE ENABLED // enabled advanced failsafe which allows running a portion of the mission in failsafe events // other settings //#define THROTTLE_IN_DEADBAND 100 // redefine size of throttle deadband in pwm (0 ~ 1000) //#define HIL_MODE HIL_MODE_SENSORS // build for hardware-in-the-loop simulation // User Hooks : For User Developed code that you wish to run // Put your variable definitions into the UserVariables.h file (or another file name and then change the #define below). //#define USERHOOK_VARIABLES "UserVariables.h" // Put your custom code into the UserCode.cpp with function names matching those listed below and ensure the appropriate #define below is uncommented below //#define USERHOOK_INIT userhook_init(); // for code to be run once at startup //#define USERHOOK_FASTLOOP userhook_FastLoop(); // for code to be run at 100hz //#define USERHOOK_50HZLOOP userhook_50Hz(); // for code to be run at 50hz //#define USERHOOK_MEDIUMLOOP userhook_MediumLoop(); // for code to be run at 10hz //#define USERHOOK_SLOWLOOP userhook_SlowLoop(); // for code to be run at 3.3hz //#define USERHOOK_SUPERSLOWLOOP userhook_SuperSlowLoop(); // for code to be run at 1hz //#define USERHOOK_AUXSWITCH ENABLED // for code to handle user aux switches //#define USER_PARAMS_ENABLED ENABLED // to enable user parameters