/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-

#include <AP_HAL/AP_HAL.h>
#if (CONFIG_HAL_BOARD == HAL_BOARD_APM1 || CONFIG_HAL_BOARD == HAL_BOARD_APM2)

#include <avr/io.h>
#include <avr/interrupt.h>

#include <AP_HAL/AP_HAL.h>
#include "AnalogIn.h"
using namespace AP_HAL_AVR;

extern const AP_HAL::HAL& hal;

/* CHANNEL_READ_REPEAT: how many reads on a channel before using the value.
 * This seems to be determined empirically */
#define CHANNEL_READ_REPEAT 2

AVRAnalogIn::AVRAnalogIn() :
    _vcc(ADCSource(ANALOG_INPUT_BOARD_VCC))
{}

void AVRAnalogIn::init(void* machtnichts) 
{
    /* Register AVRAnalogIn::_timer_event with the scheduler. */
    hal.scheduler->register_timer_process(FUNCTOR_BIND_MEMBER(&AVRAnalogIn::_timer_event, void));
    /* Register each private channel with AVRAnalogIn. */
    _register_channel(&_vcc);
}

ADCSource* AVRAnalogIn::_create_channel(int16_t chnum) {
    ADCSource *ch = new ADCSource(chnum);
    _register_channel(ch);
    return ch;
}

void AVRAnalogIn::_register_channel(ADCSource* ch) {
    if (_num_channels >= AVR_INPUT_MAX_CHANNELS) {
        for(;;) {
            hal.console->print_P(PSTR(
                "Error: AP_HAL_AVR::AVRAnalogIn out of channels\r\n"));
            hal.scheduler->delay(1000);
        }
    }
    _channels[_num_channels] = ch;
    /* Need to lock to increment _num_channels as it is used
     * by the interrupt to access _channels */
    uint8_t sreg = SREG;
    cli();
    _num_channels++;
    SREG = sreg;

    if (_num_channels == 1) {
        /* After registering the first channel, we can enable the ADC */
        PRR0 &= ~_BV(PRADC);
        ADCSRA |= _BV(ADEN);
    }
}

void AVRAnalogIn::_timer_event(void) 
{
    if (_channels[_active_channel]->_pin == ANALOG_INPUT_NONE) {
        _channels[_active_channel]->new_sample(0);
        goto next_channel;
    }

    if (ADCSRA & _BV(ADSC)) {
        /* ADC Conversion is still running - this should not happen, as we
         * are called at 1khz. */
        return;
    }

    if (_num_channels == 0) {
        /* No channels are registered - nothing to be done. */
        return;
    }

    _channel_repeat_count++;
    if (_channel_repeat_count < CHANNEL_READ_REPEAT ||
        !_channels[_active_channel]->reading_settled()) {
        /* Start a new conversion, throw away the current conversion */
        ADCSRA |= _BV(ADSC);
        return;
    }

    _channel_repeat_count = 0;

    /* Read the conversion registers. */
    {
        uint8_t low = ADCL;
        uint8_t high = ADCH;
        uint16_t sample = low | (((uint16_t)high) << 8);
        /* Give the active channel a new sample */
        _channels[_active_channel]->new_sample( sample );
    }
next_channel:
    /* stop the previous channel, if a stop pin is defined */
    _channels[_active_channel]->stop_read();
    /* Move to the next channel */
    _active_channel = (_active_channel + 1) % _num_channels;
    /* Setup the next channel's conversion */
    _channels[_active_channel]->setup_read();
    /* Start conversion */
    ADCSRA |= _BV(ADSC);
}


AP_HAL::AnalogSource* AVRAnalogIn::channel(int16_t ch) 
{
    if (ch == ANALOG_INPUT_BOARD_VCC) {
            return &_vcc;
    } else {
        return _create_channel(ch);
    }
}

/*
  return board voltage in volts
 */
float AVRAnalogIn::board_voltage(void)
{
    return _vcc.voltage_latest();
}

#endif