// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
#include "AP_Mount_Alexmos.h"

extern const AP_HAL::HAL& hal;

void AP_Mount_Alexmos::init(const AP_SerialManager& serial_manager)
{
    // check for alexmos protcol
    if ((_port = serial_manager.find_serial(AP_SerialManager::SerialProtocol_AlexMos, 0))) {
        _initialised = true;
        get_boardinfo();
        read_params(0); //we request parameters for profile 0 and therfore get global and profile parameters
    }
}

// update mount position - should be called periodically
void AP_Mount_Alexmos::update()
{
    if (!_initialised) {
        return;
    }

    read_incoming(); // read the incoming messages from the gimbal

    // update based on mount mode
    switch(get_mode()) {
        // move mount to a "retracted" position.  we do not implement a separate servo based retract mechanism
        case MAV_MOUNT_MODE_RETRACT:
            control_axis(_state._retract_angles.get(), true);
            break;

        // move mount to a neutral position, typically pointing forward
        case MAV_MOUNT_MODE_NEUTRAL:
            control_axis(_state._neutral_angles.get(), true);
            break;

        // point to the angles given by a mavlink message
        case MAV_MOUNT_MODE_MAVLINK_TARGETING:
            // do nothing because earth-frame angle targets (i.e. _angle_ef_target_rad) should have already been set by a MOUNT_CONTROL message from GCS
            break;

        // RC radio manual angle control, but with stabilization from the AHRS
        case MAV_MOUNT_MODE_RC_TARGETING:
            // update targets using pilot's rc inputs
            update_targets_from_rc();
            control_axis(_angle_ef_target_rad, false);
            break;

        // point mount to a GPS point given by the mission planner
        case MAV_MOUNT_MODE_GPS_POINT:
            if(_frontend._ahrs.get_gps().status() >= AP_GPS::GPS_OK_FIX_2D) {
                calc_angle_to_location(_state._roi_target, _angle_ef_target_rad, true, false);
                control_axis(_angle_ef_target_rad, false);
            }
            break;

        default:
            // we do not know this mode so do nothing
            break;
    }
}

// has_pan_control - returns true if this mount can control it's pan (required for multicopters)
bool AP_Mount_Alexmos::has_pan_control() const
{
    return _gimbal_3axis;
}

// set_mode - sets mount's mode
void AP_Mount_Alexmos::set_mode(enum MAV_MOUNT_MODE mode)
{
    // record the mode change and return success
    _state._mode = mode;
}

// status_msg - called to allow mounts to send their status to GCS using the MOUNT_STATUS message
void AP_Mount_Alexmos::status_msg(mavlink_channel_t chan)
{
    get_angles();
    mavlink_msg_mount_status_send(chan, 0, 0, _current_angle.y*100, _current_angle.x*100, _current_angle.z*100);
}

/*
 * get_angles
 */
void AP_Mount_Alexmos::get_angles()
{
    uint8_t data[1] = {(uint8_t)1};
    send_command (CMD_GET_ANGLES,  data , 1);
}
	
/*
 * set_motor will activate motors if true , and disable them if false.
 */
void AP_Mount_Alexmos::set_motor(bool on){
    if (on) {
        uint8_t data[1] = {(uint8_t)1};
        send_command (CMD_MOTORS_ON,  data, 1);
    } else {
        uint8_t data[1] = {(uint8_t)1};
        send_command (CMD_MOTORS_OFF, data, 1);
    }
}

/*
 * get board version and firmware version
 */
void AP_Mount_Alexmos::get_boardinfo()
{
    if (_board_version != 0) {
        return;
    }
    uint8_t data[1] = {(uint8_t)1};
    send_command (CMD_BOARD_INFO,  data , 1);
}

/*
  control_axis : send new angles to the gimbal at a fixed speed of 30 deg/s2
*/
void AP_Mount_Alexmos::control_axis(const Vector3f& angle, bool target_in_degrees )
{
    // convert to degrees if necessary
    Vector3f target_deg = angle;
    if (!target_in_degrees) {
        target_deg *= RAD_TO_DEG;
    }
    alexmos_parameters outgoing_buffer;
    outgoing_buffer.angle_speed.mode = AP_MOUNT_ALEXMOS_MODE_ANGLE;
    outgoing_buffer.angle_speed.speed_roll = DEGREE_PER_SEC_TO_VALUE(AP_MOUNT_ALEXMOS_SPEED);
    outgoing_buffer.angle_speed.angle_roll = DEGREE_TO_VALUE(target_deg.x);
    outgoing_buffer.angle_speed.speed_pitch = DEGREE_PER_SEC_TO_VALUE(AP_MOUNT_ALEXMOS_SPEED);
    outgoing_buffer.angle_speed.angle_pitch = DEGREE_TO_VALUE(target_deg.y);
    outgoing_buffer.angle_speed.speed_yaw = DEGREE_PER_SEC_TO_VALUE(AP_MOUNT_ALEXMOS_SPEED);
    outgoing_buffer.angle_speed.angle_yaw = DEGREE_TO_VALUE(target_deg.z);
    send_command (CMD_CONTROL, (uint8_t *)&outgoing_buffer.angle_speed , sizeof(alexmos_angles_speed));
}

/*
  read current profile profile_id and global parameters from the gimbal settings
*/
void AP_Mount_Alexmos::read_params(uint8_t profile_id){
    uint8_t data[1] = {(uint8_t) profile_id}; 
    send_command (CMD_READ_PARAMS,  data , 1);
}

/*
  write new parameters to the gimbal settings
*/
void AP_Mount_Alexmos::write_params()
{
    if (!_param_read_once) {
        return;
    }
    send_command (CMD_WRITE_PARAMS,  (uint8_t *)&_current_parameters.params , sizeof(alexmos_params));
}

/*
 send a command to the Alemox Serial API
*/
void AP_Mount_Alexmos::send_command(uint8_t cmd, uint8_t* data, uint8_t size)
{
    if (_port->txspace() < (size + 5)) {
        return;
    }
    uint8_t checksum = 0;
    _port->write( '>' );
    _port->write( cmd );  // write command id
    _port->write( size );  // write body size
    _port->write( cmd+size ); // write header checkum

    for (uint8_t i = 0;  i != size ; i++) {
        checksum += data[i];
        _port->write ( data[i] );
    }
    _port->write (checksum);
}

/*
 * Parse the body of the message received from the Alexmos gimbal
 */
void AP_Mount_Alexmos::parse_body()
{
    switch (_command_id ) {
        case CMD_BOARD_INFO:
            _board_version = _buffer.version._board_version/ 10;
            _current_firmware_version = _buffer.version._firmware_version / 1000.0f ;
            _firmware_beta_version = _buffer.version._firmware_version % 10 ;
            _gimbal_3axis = ( _buffer.version._board_features & 0x1 );
            _gimbal_bat_monitoring = (_buffer.version._board_features & 0x2 );
            break;

        case CMD_GET_ANGLES:
            _current_angle.x = VALUE_TO_DEGREE(_buffer.angles.angle_roll);
            _current_angle.y = VALUE_TO_DEGREE(_buffer.angles.angle_pitch);
            _current_angle.z = VALUE_TO_DEGREE(_buffer.angles.angle_yaw);
            break;

        case CMD_READ_PARAMS:
            _param_read_once = true;
            _current_parameters.params = _buffer.params;
            break;

        case CMD_WRITE_PARAMS:
            break;

        default :
            _last_command_confirmed = true;
            break;
    }
}

/*
 * detect and read the header of the incoming message from the gimbal
 */
void AP_Mount_Alexmos::read_incoming()
{
    uint8_t data;
    int16_t numc;

    numc = _port->available();

    if (numc < 0 ){
        return;
    }
        
    for (int16_t i = 0; i < numc; i++) {        // Process bytes received
        data = _port->read();
        switch (_step) {
            case 0:
                if ( '>' == data) {
                    _step = 1;
                    _checksum = 0; //reset checksum accumulator
                    _last_command_confirmed = false;
                }
                break;

            case 1: // command ID
                _checksum = data;
                _command_id = data;
                _step++;
                break;

            case 2: // Size of the body of the message
                _checksum += data;
                _payload_length = data;
                _step++;
                break;

            case 3:	// checksum of the header
                if (_checksum != data ) {
                    _step = 0;
                    _checksum = 0;
                    // checksum error
                    break;
                }
                _step++;
                _checksum = 0;
                _payload_counter = 0;                               // prepare to receive payload
                break;

            case 4: // parsing body
                _checksum += data;
                if (_payload_counter < sizeof(_buffer)) {
                    _buffer.bytes[_payload_counter] = data;
                }
                if (++_payload_counter == _payload_length)
                    _step++;
                break;

            case 5:// body checksum
                _step = 0;
                if (_checksum  != data) {
                    break;
                }
                parse_body ();
        }
    }
}