/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*- /* * control_circle.pde - init and run calls for circle flight mode */ // circle_init - initialise circle controller flight mode static bool circle_init(bool ignore_checks) { if (position_ok() || ignore_checks) { circle_pilot_yaw_override = false; // initialize speeds and accelerations pos_control.set_speed_xy(wp_nav.get_speed_xy()); pos_control.set_accel_xy(wp_nav.get_wp_acceleration()); pos_control.set_speed_z(-g.pilot_velocity_z_max, g.pilot_velocity_z_max); pos_control.set_accel_z(g.pilot_accel_z); // initialise circle controller including setting the circle center based on vehicle speed circle_nav.init(); return true; }else{ return false; } } // circle_run - runs the circle flight mode // should be called at 100hz or more static void circle_run() { float target_yaw_rate = 0; float target_climb_rate = 0; // if not auto armed set throttle to zero and exit immediately if(!ap.auto_armed || ap.land_complete) { // To-Do: add some initialisation of position controllers attitude_control.relax_bf_rate_controller(); attitude_control.set_yaw_target_to_current_heading(); attitude_control.set_throttle_out(0, false); pos_control.set_alt_target_to_current_alt(); return; } // process pilot inputs if (!failsafe.radio) { // get pilot's desired yaw rate target_yaw_rate = get_pilot_desired_yaw_rate(g.rc_4.control_in); if (target_yaw_rate != 0) { circle_pilot_yaw_override = true; } // get pilot desired climb rate target_climb_rate = get_pilot_desired_climb_rate(g.rc_3.control_in); // check for pilot requested take-off if (ap.land_complete && target_climb_rate > 0) { // indicate we are taking off set_land_complete(false); // clear i term when we're taking off set_throttle_takeoff(); } } // run circle controller circle_nav.update(); // call attitude controller if (circle_pilot_yaw_override) { attitude_control.angle_ef_roll_pitch_rate_ef_yaw(circle_nav.get_roll(), circle_nav.get_pitch(), target_yaw_rate); }else{ attitude_control.angle_ef_roll_pitch_yaw(circle_nav.get_roll(), circle_nav.get_pitch(), circle_nav.get_yaw(),true); } // run altitude controller if (sonar_alt_health >= SONAR_ALT_HEALTH_MAX) { // if sonar is ok, use surface tracking target_climb_rate = get_surface_tracking_climb_rate(target_climb_rate, pos_control.get_alt_target(), G_Dt); } // update altitude target and call position controller pos_control.set_alt_target_from_climb_rate(target_climb_rate, G_Dt); pos_control.update_z_controller(); }