#include "Copter.h" #if FRAME_CONFIG == HELI_FRAME /* * Init and run calls for stabilize flight mode for trad heli */ // stabilize_init - initialise stabilize controller bool Copter::ModeStabilize_Heli::init(bool ignore_checks) { // set stab collective true to use stabilize scaled collective pitch range copter.input_manager.set_use_stab_col(true); return true; } // stabilize_run - runs the main stabilize controller // should be called at 100hz or more void Copter::ModeStabilize_Heli::run() { float target_roll, target_pitch; float target_yaw_rate; float pilot_throttle_scaled; // Tradheli should not reset roll, pitch, yaw targets when motors are not runup, because // we may be in autorotation flight. These should be reset only when transitioning from disarmed // to armed, because the pilot will have placed the helicopter down on the landing pad. This is so // that the servos move in a realistic fashion while disarmed for operational checks. // Also, unlike multicopters we do not set throttle (i.e. collective pitch) to zero so the swash servos move if(!motors->armed()) { copter.heli_flags.init_targets_on_arming = true; attitude_control->set_yaw_target_to_current_heading(); attitude_control->reset_rate_controller_I_terms(); } if(motors->armed() && copter.heli_flags.init_targets_on_arming) { attitude_control->set_yaw_target_to_current_heading(); attitude_control->reset_rate_controller_I_terms(); if (motors->get_interlock()) { copter.heli_flags.init_targets_on_arming=false; } } // clear landing flag above zero throttle if (motors->armed() && motors->get_interlock() && motors->rotor_runup_complete() && !ap.throttle_zero) { set_land_complete(false); } // apply SIMPLE mode transform to pilot inputs update_simple_mode(); // convert pilot input to lean angles get_pilot_desired_lean_angles(target_roll, target_pitch, copter.aparm.angle_max, copter.aparm.angle_max); // get pilot's desired yaw rate target_yaw_rate = get_pilot_desired_yaw_rate(channel_yaw->get_control_in()); // get pilot's desired throttle pilot_throttle_scaled = copter.input_manager.get_pilot_desired_collective(channel_throttle->get_control_in()); // call attitude controller attitude_control->input_euler_angle_roll_pitch_euler_rate_yaw(target_roll, target_pitch, target_yaw_rate); // output pilot's throttle - note that TradHeli does not used angle-boost attitude_control->set_throttle_out(pilot_throttle_scaled, false, g.throttle_filt); } #endif //HELI_FRAME