/*
   This program is free software: you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation, either version 3 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
/*
  SRV_Channel.cpp - object to separate input and output channel
  ranges, trim and reversal
 */

#include <AP_HAL/AP_HAL.h>
#include <AP_Math/AP_Math.h>
#include <AP_Vehicle/AP_Vehicle.h>
#include "SRV_Channel.h"

#if HAL_WITH_UAVCAN
  #include <AP_BoardConfig/AP_BoardConfig_CAN.h>
  #include <AP_UAVCAN/AP_UAVCAN.h>

  // To be replaced with macro saying if KDECAN library is included
  #if APM_BUILD_TYPE(APM_BUILD_ArduCopter) || APM_BUILD_TYPE(APM_BUILD_ArduPlane) || APM_BUILD_TYPE(APM_BUILD_ArduSub)
    #include <AP_KDECAN/AP_KDECAN.h>
  #endif
  #include <AP_ToshibaCAN/AP_ToshibaCAN.h>
  #include <AP_PiccoloCAN/AP_PiccoloCAN.h>
#endif

extern const AP_HAL::HAL& hal;

SRV_Channel *SRV_Channels::channels;
SRV_Channels *SRV_Channels::_singleton;
AP_Volz_Protocol *SRV_Channels::volz_ptr;
AP_SBusOut *SRV_Channels::sbus_ptr;
AP_RobotisServo *SRV_Channels::robotis_ptr;

#if HAL_SUPPORT_RCOUT_SERIAL
AP_BLHeli *SRV_Channels::blheli_ptr;
#endif

uint16_t SRV_Channels::disabled_mask;
uint16_t SRV_Channels::digital_mask;
uint16_t SRV_Channels::reversible_mask;

bool SRV_Channels::disabled_passthrough;
bool SRV_Channels::initialised;
bool SRV_Channels::emergency_stop;
Bitmask<SRV_Channel::k_nr_aux_servo_functions> SRV_Channels::function_mask;
SRV_Channels::srv_function SRV_Channels::functions[SRV_Channel::k_nr_aux_servo_functions];

const AP_Param::GroupInfo SRV_Channels::var_info[] = {
    // @Group: 1_
    // @Path: SRV_Channel.cpp
    AP_SUBGROUPINFO(obj_channels[0], "1_",  1, SRV_Channels, SRV_Channel),

    // @Group: 2_
    // @Path: SRV_Channel.cpp
    AP_SUBGROUPINFO(obj_channels[1], "2_",  2, SRV_Channels, SRV_Channel),

    // @Group: 3_
    // @Path: SRV_Channel.cpp
    AP_SUBGROUPINFO(obj_channels[2], "3_",  3, SRV_Channels, SRV_Channel),

    // @Group: 4_
    // @Path: SRV_Channel.cpp
    AP_SUBGROUPINFO(obj_channels[3], "4_",  4, SRV_Channels, SRV_Channel),

    // @Group: 5_
    // @Path: SRV_Channel.cpp
    AP_SUBGROUPINFO(obj_channels[4], "5_",  5, SRV_Channels, SRV_Channel),

    // @Group: 6_
    // @Path: SRV_Channel.cpp
    AP_SUBGROUPINFO(obj_channels[5], "6_",  6, SRV_Channels, SRV_Channel),

    // @Group: 7_
    // @Path: SRV_Channel.cpp
    AP_SUBGROUPINFO(obj_channels[6], "7_",  7, SRV_Channels, SRV_Channel),

    // @Group: 8_
    // @Path: SRV_Channel.cpp
    AP_SUBGROUPINFO(obj_channels[7], "8_",  8, SRV_Channels, SRV_Channel),

    // @Group: 9_
    // @Path: SRV_Channel.cpp
    AP_SUBGROUPINFO(obj_channels[8], "9_",  9, SRV_Channels, SRV_Channel),

    // @Group: 10_
    // @Path: SRV_Channel.cpp
    AP_SUBGROUPINFO(obj_channels[9], "10_",  10, SRV_Channels, SRV_Channel),

    // @Group: 11_
    // @Path: SRV_Channel.cpp
    AP_SUBGROUPINFO(obj_channels[10], "11_",  11, SRV_Channels, SRV_Channel),

    // @Group: 12_
    // @Path: SRV_Channel.cpp
    AP_SUBGROUPINFO(obj_channels[11], "12_",  12, SRV_Channels, SRV_Channel),

    // @Group: 13_
    // @Path: SRV_Channel.cpp
    AP_SUBGROUPINFO(obj_channels[12], "13_",  13, SRV_Channels, SRV_Channel),

    // @Group: 14_
    // @Path: SRV_Channel.cpp
    AP_SUBGROUPINFO(obj_channels[13], "14_",  14, SRV_Channels, SRV_Channel),

    // @Group: 15_
    // @Path: SRV_Channel.cpp
    AP_SUBGROUPINFO(obj_channels[14], "15_",  15, SRV_Channels, SRV_Channel),

    // @Group: 16_
    // @Path: SRV_Channel.cpp
    AP_SUBGROUPINFO(obj_channels[15], "16_",  16, SRV_Channels, SRV_Channel),

    // @Param: _AUTO_TRIM
    // @DisplayName: Automatic servo trim
    // @Description: This enables automatic servo trim in flight. Servos will be trimed in stabilized flight modes when the aircraft is close to level. Changes to servo trim will be saved every 10 seconds and will persist between flights. The automatic trim won't go more than 20% away from a centered trim.
    // @Values: 0:Disable,1:Enable
    // @User: Advanced
    AP_GROUPINFO_FRAME("_AUTO_TRIM",  17, SRV_Channels, auto_trim, 0, AP_PARAM_FRAME_PLANE),

    // @Param: _RATE
    // @DisplayName: Servo default output rate
    // @Description: This sets the default output rate in Hz for all outputs.
    // @Range: 25 400
    // @User: Advanced
    // @Units: Hz
    AP_GROUPINFO("_RATE",  18, SRV_Channels, default_rate, 50),

    // @Group: _VOLZ_
    // @Path: ../AP_Volz_Protocol/AP_Volz_Protocol.cpp
    AP_SUBGROUPINFO(volz, "_VOLZ_",  19, SRV_Channels, AP_Volz_Protocol),

    // @Group: _SBUS_
    // @Path: ../AP_SBusOut/AP_SBusOut.cpp
    AP_SUBGROUPINFO(sbus, "_SBUS_",  20, SRV_Channels, AP_SBusOut),

#if HAL_SUPPORT_RCOUT_SERIAL
    // @Group: _BLH_
    // @Path: ../AP_BLHeli/AP_BLHeli.cpp
    AP_SUBGROUPINFO(blheli, "_BLH_",  21, SRV_Channels, AP_BLHeli),
#endif

    // @Group: _ROB_
    // @Path: ../AP_RobotisServo/AP_RobotisServo.cpp
    AP_SUBGROUPINFO(robotis, "_ROB_",  22, SRV_Channels, AP_RobotisServo),
    
    AP_GROUPEND
};

/*
  constructor
 */
SRV_Channels::SRV_Channels(void)
{
    _singleton = this;
    channels = obj_channels;

    // set defaults from the parameter table
    AP_Param::setup_object_defaults(this, var_info);

    // setup ch_num on channels
    for (uint8_t i=0; i<NUM_SERVO_CHANNELS; i++) {
        channels[i].ch_num = i;
    }

    volz_ptr = &volz;
    sbus_ptr = &sbus;
    robotis_ptr = &robotis;
#if HAL_SUPPORT_RCOUT_SERIAL
    blheli_ptr = &blheli;
#endif
}

/*
  save adjusted trims
 */
void SRV_Channels::save_trim(void)
{
    for (uint8_t i=0; i<NUM_SERVO_CHANNELS; i++) {
        if (trimmed_mask & (1U<<i)) {
            channels[i].servo_trim.set_and_save(channels[i].servo_trim.get());
        }
    }
    trimmed_mask = 0;
}

void SRV_Channels::setup_failsafe_trim_all_non_motors(void)
{
    for (uint8_t i = 0; i < NUM_SERVO_CHANNELS; i++) {
        if (!SRV_Channel::is_motor(channels[i].get_function())) {
            hal.rcout->set_failsafe_pwm(1U<<channels[i].ch_num, channels[i].servo_trim);
        }
    }
}

/*
  run calc_pwm for all channels
 */
void SRV_Channels::calc_pwm(void)
{
    for (uint8_t i=0; i<NUM_SERVO_CHANNELS; i++) {
        channels[i].calc_pwm(functions[channels[i].function].output_scaled);
    }
}

// set output value for a specific function channel as a pwm value
void SRV_Channels::set_output_pwm_chan(uint8_t chan, uint16_t value)
{
    if (chan < NUM_SERVO_CHANNELS) {
        channels[chan].set_output_pwm(value);
    }
}

/*
  wrapper around hal.rcout->cork()
 */
void SRV_Channels::cork()
{
    hal.rcout->cork();
}

/*
  wrapper around hal.rcout->push()
 */
void SRV_Channels::push()
{
    hal.rcout->push();

    // give volz library a chance to update
    volz_ptr->update();

    // give sbus library a chance to update
    sbus_ptr->update();

    // give robotis library a chance to update
    robotis_ptr->update();
    
#if HAL_SUPPORT_RCOUT_SERIAL
    // give blheli telemetry a chance to update
    blheli_ptr->update_telemetry();
#endif

#if HAL_WITH_UAVCAN
    // push outputs to CAN
    uint8_t can_num_drivers = AP::can().get_num_drivers();
    for (uint8_t i = 0; i < can_num_drivers; i++) {
        switch (AP::can().get_protocol_type(i)) {
            case AP_BoardConfig_CAN::Protocol_Type_UAVCAN: {
                AP_UAVCAN *ap_uavcan = AP_UAVCAN::get_uavcan(i);
                if (ap_uavcan == nullptr) {
                    continue;
                }
                ap_uavcan->SRV_push_servos();
                break;
            }
            case AP_BoardConfig_CAN::Protocol_Type_KDECAN: {
// To be replaced with macro saying if KDECAN library is included
#if APM_BUILD_TYPE(APM_BUILD_ArduCopter) || APM_BUILD_TYPE(APM_BUILD_ArduPlane) || APM_BUILD_TYPE(APM_BUILD_ArduSub)
                AP_KDECAN *ap_kdecan = AP_KDECAN::get_kdecan(i);
                if (ap_kdecan == nullptr) {
                    continue;
                }
                ap_kdecan->update();
                break;
#endif
            }
            case AP_BoardConfig_CAN::Protocol_Type_ToshibaCAN: {
                AP_ToshibaCAN *ap_tcan = AP_ToshibaCAN::get_tcan(i);
                if (ap_tcan == nullptr) {
                    continue;
                }
                ap_tcan->update();
                break;
            }
#if HAL_PICCOLO_CAN_ENABLE
            case AP_BoardConfig_CAN::Protocol_Type_PiccoloCAN: {
                AP_PiccoloCAN *ap_pcan = AP_PiccoloCAN::get_pcan(i);
                if (ap_pcan == nullptr) {
                    continue;
                }
                ap_pcan->update();
                break;
            }
#endif
            case AP_BoardConfig_CAN::Protocol_Type_None:
            default:
                break;
        }
    }
#endif // HAL_WITH_UAVCAN
}