/*
* This file is free software: you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This file is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program. If not, see .
*
* Author: Siddharth Bharat Purohit
*/
#include "AP_UAVCAN_IfaceMgr.h"
#if HAL_MAX_CAN_PROTOCOL_DRIVERS
#include "AP_UAVCAN_Clock.h"
#include
#include
using namespace uavcan;
extern const AP_HAL::HAL& hal;
#define LOG_TAG "UAVCANIface"
/*****************************************************
* *
* CAN Iface *
* *
* ***************************************************/
/**
* Non-blocking transmission.
*
* If the frame wasn't transmitted upon TX deadline, the driver should discard it.
*
* Note that it is LIKELY that the library will want to send the frames that were passed into the select()
* method as the next ones to transmit, but it is NOT guaranteed. The library can replace those with new
* frames between the calls.
*
* @return 1 = one frame transmitted, 0 = TX buffer full, negative for error.
*/
int16_t CanIface::send(const CanFrame& frame, MonotonicTime tx_deadline, CanIOFlags flags)
{
if (can_iface_ == UAVCAN_NULLPTR) {
return -1;
}
return can_iface_->send(AP_HAL::CANFrame(frame.id, frame.data, frame.dlc), tx_deadline.toUSec(), flags);
}
/**
* Non-blocking reception.
*
* Timestamps should be provided by the CAN driver, ideally by the hardware CAN controller.
*
* Monotonic timestamp is required and can be not precise since it is needed only for
* protocol timing validation (transfer timeouts and inter-transfer intervals).
*
* UTC timestamp is optional, if available it will be used for precise time synchronization;
* must be set to zero if not available.
*
* Refer to @ref ISystemClock to learn more about timestamps.
*
* @param [out] out_ts_monotonic Monotonic timestamp, mandatory.
* @param [out] out_ts_utc UTC timestamp, optional, zero if unknown.
* @return 1 = one frame received, 0 = RX buffer empty, negative for error.
*/
int16_t CanIface::receive(CanFrame& out_frame, MonotonicTime& out_ts_monotonic, UtcTime& out_ts_utc,
CanIOFlags& out_flags)
{
if (can_iface_ == UAVCAN_NULLPTR) {
return -1;
}
AP_HAL::CANFrame frame;
uint64_t rx_timestamp;
uint16_t flags;
out_ts_monotonic = SystemClock::instance().getMonotonic();
int16_t ret = can_iface_->receive(frame, rx_timestamp, flags);
if (ret < 0) {
return ret;
}
out_frame = CanFrame(frame.id, (const uint8_t*)frame.data, frame.dlc);
out_flags = flags;
if (rx_timestamp != 0) {
out_ts_utc = uavcan::UtcTime::fromUSec(SystemClock::instance().getAdjustUsec() + rx_timestamp);
} else {
out_ts_utc = uavcan::UtcTime::fromUSec(0);
}
return ret;
}
/**
* Configure the hardware CAN filters. @ref CanFilterConfig.
*
* @return 0 = success, negative for error.
*/
int16_t CanIface::configureFilters(const CanFilterConfig* filter_configs, uint16_t num_configs)
{
if (can_iface_ == UAVCAN_NULLPTR) {
return -1;
}
AP_HAL::CANIface::CanFilterConfig* hal_filter_configs = new AP_HAL::CANIface::CanFilterConfig[num_configs];
if (hal_filter_configs == nullptr) {
return -1;
}
for (uint16_t i = 0; i < num_configs; i++) {
hal_filter_configs[i].id = filter_configs[i].id;
hal_filter_configs[i].mask = filter_configs[i].mask;
}
return can_iface_->configureFilters(hal_filter_configs, num_configs);
}
/**
* Number of available hardware filters.
*/
uint16_t CanIface::getNumFilters() const
{
if (can_iface_ == UAVCAN_NULLPTR) {
return 0;
}
return can_iface_->getNumFilters();
}
/**
* Continuously incrementing counter of hardware errors.
* Arbitration lost should not be treated as a hardware error.
*/
uint64_t CanIface::getErrorCount() const
{
if (can_iface_ == UAVCAN_NULLPTR) {
return 0;
}
return can_iface_->getErrorCount();
}
/*****************************************************
* *
* CAN Driver *
* *
* ***************************************************/
bool CanIfaceMgr::add_interface(AP_HAL::CANIface *can_iface)
{
if (num_ifaces > HAL_NUM_CAN_IFACES) {
AP::can().log_text(AP_CANManager::LOG_ERROR, LOG_TAG, "UAVCANIfaceMgr: Num Ifaces Exceeded\n");
return false;
}
if (can_iface == nullptr) {
AP::can().log_text(AP_CANManager::LOG_ERROR, LOG_TAG, "UAVCANIfaceMgr: Iface Null\n");
return false;
}
if (ifaces[num_ifaces] != nullptr) {
AP::can().log_text(AP_CANManager::LOG_ERROR, LOG_TAG, "UAVCANIfaceMgr: Iface already added\n");
return false;
}
ifaces[num_ifaces] = new CanIface(can_iface);
if (ifaces[num_ifaces] == nullptr) {
AP::can().log_text(AP_CANManager::LOG_ERROR, LOG_TAG, "UAVCANIfaceMgr: Can't alloc uavcan::iface\n");
return false;
}
if (!ifaces[num_ifaces]->can_iface_->set_event_handle(&_event_handle)) {
AP::can().log_text(AP_CANManager::LOG_ERROR, LOG_TAG, "UAVCANIfaceMgr: Setting event handle failed\n");
return false;
}
AP::can().log_text(AP_CANManager::LOG_INFO, LOG_TAG, "UAVCANIfaceMgr: Successfully added interface %d\n");
num_ifaces++;
return true;
}
/**
* Returns an interface by index, or null pointer if the index is out of range.
*/
ICanIface* CanIfaceMgr::getIface(uint8_t iface_index)
{
if (iface_index >= num_ifaces) {
return UAVCAN_NULLPTR;
}
return ifaces[iface_index];
}
/**
* Total number of available CAN interfaces.
* This value shall not change after initialization.
*/
uint8_t CanIfaceMgr::getNumIfaces() const
{
return num_ifaces;
}
CanSelectMasks CanIfaceMgr::makeSelectMasks(const CanSelectMasks in_mask, const CanFrame* (& pending_tx)[MaxCanIfaces]) const
{
CanSelectMasks msk;
for (uint8_t i = 0; i < num_ifaces; i++) {
bool read = in_mask.read & (1 << i);
bool write = in_mask.write & (1 << i);
CanIface* iface = ifaces[i];
if (iface == nullptr) {
continue;
}
if (pending_tx[i] == UAVCAN_NULLPTR) {
if (iface->can_iface_->select(read, write, nullptr, 0)) {
msk.read |= (read ? 1 : 0) << i;
msk.write |= (write ? 1 : 0) << i;
}
} else {
AP_HAL::CANFrame frame {pending_tx[i]->id, pending_tx[i]->data, pending_tx[i]->dlc};
if (iface->can_iface_->select(read, write, &frame, 0)) {
msk.read |= (read ? 1 : 0) << i;
msk.write |= (write ? 1 : 0) << i;
}
}
}
return msk;
}
/**
* Block until the deadline, or one of the specified interfaces becomes available for read or write.
*
* Iface masks will be modified by the driver to indicate which exactly interfaces are available for IO.
*
* Bit position in the masks defines interface index.
*
* Note that it is allowed to return from this method even if no requested events actually happened, or if
* there are events that were not requested by the library.
*
* The pending TX argument contains an array of pointers to CAN frames that the library wants to transmit
* next, per interface. This is intended to allow the driver to properly prioritize transmissions; many
* drivers will not need to use it. If a write flag for the given interface is set to one in the select mask
* structure, then the corresponding pointer is guaranteed to be valid (not UAVCAN_NULLPTR).
*
* @param [in,out] inout_masks Masks indicating which interfaces are needed/available for IO.
* @param [in] pending_tx Array of frames, per interface, that are likely to be transmitted next.
* @param [in] blocking_deadline Zero means non-blocking operation.
* @return Positive number of ready interfaces or negative error code.
*/
int16_t CanIfaceMgr::select(CanSelectMasks& inout_masks,
const CanFrame* (& pending_tx)[MaxCanIfaces],
const MonotonicTime blocking_deadline)
{
const CanSelectMasks in_masks = inout_masks;
const uint64_t time = SystemClock::instance().getMonotonic().toUSec();
inout_masks = makeSelectMasks(in_masks, pending_tx); // Check if we already have some of the requested events
if ((inout_masks.read & in_masks.read) != 0 ||
(inout_masks.write & in_masks.write) != 0) {
return 1;
}
if (time < blocking_deadline.toUSec()) {
_event_handle.wait(blocking_deadline.toUSec() - time); // Block until timeout expires or any iface updates
}
inout_masks = makeSelectMasks(in_masks, pending_tx); // Return what we got even if none of the requested events are set
return 1; // Return value doesn't matter as long as it is non-negative
}
#endif