# parameters for Foxtech GreatShark

# https://www.foxtechfpv.com/foxtech-great-shark-330-vtol.html

# airspeed
ARSPD_FBW_MAX    35
ARSPD_FBW_MIN    18
TRIM_ARSPD_CM    2300
TRIM_THROTTLE    60

# notch filter
INS_HNTCH_ENABLE 1
INS_HNTCH_ATT   50.000000
INS_HNTCH_BW    38.000000
INS_HNTCH_ENABLE 1.000000
INS_HNTCH_FREQ  75.000000
INS_HNTCH_HMNCS 15.000000
INS_HNTCH_MODE  1.000000
INS_HNTCH_REF   0.337000

# fixed wing limits
LIM_PITCH_MIN    -2000
LIM_ROLL_CD      4000
LEVEL_ROLL_LIMIT 12

FBWB_CLIMB_RATE  5
WP_LOITER_RAD    250
WP_RADIUS        200
RTL_RADIUS       200

# fixed wing tune
RLL2SRV_RMAX     75
RLL_RATE_D       0.009886
RLL_RATE_FF      0.442834
RLL_RATE_FLTD    12.5
RLL_RATE_FLTT    3.183099
RLL_RATE_I       0.442834
RLL_RATE_P       0.385863
RLL_RATE_SMAX    100

PTCH2SRV_RMAX_DN 75
PTCH2SRV_RMAX_UP 75
PTCH2SRV_TCONST  0.75
PTCH_RATE_D      0.027
PTCH_RATE_FF     1.835124
PTCH_RATE_FLTD   12.5
PTCH_RATE_FLTT   2.122066
PTCH_RATE_I      1.835124
PTCH_RATE_P      1.113065
PTCH_RATE_SMAX   100

# quadplane parameters
Q_ENABLE         1
Q_FRAME_CLASS    1
Q_FRAME_TYPE     1
Q_ANGLE_MAX      1500
Q_ASSIST_ANGLE   30
Q_ASSIST_SPEED   15
Q_A_ACCEL_P_MAX  30000
Q_A_ACCEL_R_MAX  30000
Q_A_ACCEL_Y_MAX  9000
Q_A_ANG_PIT_P    3
Q_A_ANG_RLL_P    3
Q_A_ANG_YAW_P    3
Q_A_RATE_P_MAX   60
Q_A_RATE_R_MAX   60
Q_A_RATE_Y_MAX   60
Q_A_RAT_PIT_D    0.005523
Q_A_RAT_PIT_FLTD 12.5
Q_A_RAT_PIT_FLTT 12.5
Q_A_RAT_PIT_I    0.198349
Q_A_RAT_PIT_P    0.198349
Q_A_RAT_RLL_D    0.003301
Q_A_RAT_RLL_FLTD 12.5
Q_A_RAT_RLL_FLTT 12.5
Q_A_RAT_RLL_I    0.233438
Q_A_RAT_RLL_P    0.233438
Q_A_RAT_YAW_D    0.01
Q_A_RAT_YAW_FLTD 12.5
Q_A_RAT_YAW_FLTE 2
Q_A_RAT_YAW_FLTT 12.5
Q_A_RAT_YAW_P    1
Q_A_SLEW_YAW     3000
Q_LAND_FINAL_ALT 12
Q_LAND_SPEED     40
Q_M_BAT_IDX      1
Q_M_BAT_VOLT_MAX 50.4
Q_M_BAT_VOLT_MIN 40
Q_M_THST_HOVER   0.338

# soften VTOL position controller
Q_P_POSXY_P      0.5
Q_P_VELXY_D      0.17
Q_P_VELXY_I      0.35
Q_P_VELXY_P      0.7

Q_RTL_ALT        40
Q_TRANS_DECEL    1.5
Q_TRANS_FAIL     20
Q_VELZ_MAX       200
Q_VELZ_MAX_DN    130
Q_VFWD_ALT       6
Q_VFWD_GAIN      0.05
Q_WVANE_GAIN     0.3
Q_WVANE_TAKEOFF  0

# servo setup
SERVO1_REVERSED  1
SERVO2_FUNCTION  79
SERVO2_REVERSED  1
SERVO4_FUNCTION  80
SERVO_AUTO_TRIM  1