/* DroneCAN gimbal driver Implements gimbal control and attitude feedback using the DroneCAN / DSDL / com / xacti messages see https://github.com/dronecan/DSDL/tree/master/com/xacti */ #pragma once #include "AP_Mount_Backend.h" #if HAL_MOUNT_XACTI_ENABLED #include #include #include #include #include #include "AP_Mount.h" class AP_Mount_Xacti : public AP_Mount_Backend { public: // Constructor AP_Mount_Xacti(class AP_Mount &frontend, class AP_Mount_Params ¶ms, uint8_t instance); /* Do not allow copies */ CLASS_NO_COPY(AP_Mount_Xacti); // init - performs any required initialisation for this instance void init() override; // update mount position - should be called periodically void update() override; // return true if healthy bool healthy() const override; // has_pan_control - returns true if this mount can control its pan (required for multicopters) bool has_pan_control() const override { return yaw_range_valid(); }; // // camera controls // // take a picture. returns true on success bool take_picture() override; // start or stop video recording // set start_recording = true to start record, false to stop recording bool record_video(bool start_recording) override; // set zoom specified as a rate or percentage bool set_zoom(ZoomType zoom_type, float zoom_value) override; // set focus specified as rate, percentage or auto // focus in = -1, focus hold = 0, focus out = 1 SetFocusResult set_focus(FocusType focus_type, float focus_value) override; // set camera lens as a value from 0 to 5 bool set_lens(uint8_t lens) override; // send camera information message to GCS void send_camera_information(mavlink_channel_t chan) const override; // send camera settings message to GCS void send_camera_settings(mavlink_channel_t chan) const override; // subscribe to Xacti DroneCAN messages static void subscribe_msgs(AP_DroneCAN* ap_dronecan); // xacti specific message handlers static void handle_gimbal_attitude_status(AP_DroneCAN* ap_dronecan, const CanardRxTransfer& transfer, const com_xacti_GimbalAttitudeStatus &msg); static void handle_gnss_status_req(AP_DroneCAN* ap_dronecan, const CanardRxTransfer& transfer, const com_xacti_GnssStatusReq &msg); protected: // get attitude as a quaternion. returns true on success bool get_attitude_quaternion(Quaternion& att_quat) override; private: // send text prefix string to reduce flash cost static const char* send_text_prefix; // Sensor mode enumeration (aka lens) enum class SensorsMode : uint8_t { RGB = 0, // RGB (aka "visible)") IR = 1, // Infrared, aka thermal PIP = 2, // RGB with IR PIP NDVI = 3, // NDVI (vegetation greenness) }; // array of sensor mode enumeration strings for display to user // if enum above is updated, also update sensor_mode_str definition in cpp static const char* sensor_mode_str[]; // send target pitch and yaw rates to gimbal // yaw_is_ef should be true if yaw_rads target is an earth frame rate, false if body_frame void send_target_rates(float pitch_rads, float yaw_rads, bool yaw_is_ef); // send target pitch and yaw angles to gimbal // yaw_is_ef should be true if yaw_rad target is an earth frame angle, false if body_frame void send_target_angles(float pitch_rad, float yaw_rad, bool yaw_is_ef); // register backend in detected modules array used to map DroneCAN port and node id to backend void register_backend(); // find backend associated with the given dronecan port and node_id. also associates backends with zero node ids // returns pointer to backend on success, nullptr on failure static AP_Mount_Xacti* get_dronecan_backend(AP_DroneCAN* ap_dronecan, uint8_t node_id); // DroneCAN parameter handling methods FUNCTOR_DECLARE(param_int_cb, bool, AP_DroneCAN*, const uint8_t, const char*, int32_t &); FUNCTOR_DECLARE(param_string_cb, bool, AP_DroneCAN*, const uint8_t, const char*, AP_DroneCAN::string &); FUNCTOR_DECLARE(param_save_cb, void, AP_DroneCAN*, const uint8_t, bool); bool handle_param_get_set_response_int(AP_DroneCAN* ap_dronecan, const uint8_t node_id, const char* name, int32_t &value); bool handle_param_get_set_response_string(AP_DroneCAN* ap_dronecan, const uint8_t node_id, const char* name, AP_DroneCAN::string &value); void handle_param_save_response(AP_DroneCAN* ap_dronecan, const uint8_t node_id, bool success); // param enum. If enum is updated also update _param_names definition in cpp enum class Param : uint8_t { SingleShot = 0, Recording, FocusMode, SensorMode, DigitalZoomMagnification, FirmwareVersion, Status, DateTime, OpticalZoomMagnification, LAST = OpticalZoomMagnification, // this should be equal to the final parameter enum }; static const char* _param_names[]; // array of Xacti parameter strings // get parameter name for a particular param enum value // returns an empty string if not found (which should never happen) const char* get_param_name_str(Param param) const; // helper function to get and set parameters bool set_param_int32(Param param, int32_t param_value); bool set_param_string(Param param, const AP_DroneCAN::string& param_value); bool get_param_string(Param param); // process queue of set parameter items. returns true if set-parameter message was sent bool process_set_param_int32_queue(); // send gimbal control message via DroneCAN // mode is 2:angle control or 3:rate control // pitch_cd is pitch angle in centi-degrees or pitch rate in cds // yaw_cd is angle in centi-degrees or yaw rate in cds void send_gimbal_control(uint8_t mode, int16_t pitch_cd, int16_t yaw_cd); // send vehicle attitude to gimbal via DroneCAN. now_ms is current system time // returns true if sent so that we avoid immediately trying to also send other messages bool send_copter_att_status(uint32_t now_ms); // update zoom rate controller. now_ms is current system time // returns true if sent so that we avoid immediately trying to also send other messages bool update_zoom_rate_control(uint32_t now_ms); // request firmware version. now_ms is current system time // returns true if sent so that we avoid immediately trying to also send other messages bool request_firmware_version(uint32_t now_ms); // request parameters used to determine camera capabilities. now_ms is current system time // returns true if a param get/set was sent so that we avoid sending other messages bool request_capabilities(uint32_t now_ms); // set date and time. now_ms is current system time bool set_datetime(uint32_t now_ms); // request status. now_ms is current system time // returns true if sent so that we avoid immediately trying to also send other messages bool request_status(uint32_t now_ms); // check if safe to send message (if messages sent too often camera will not respond) // now_ms is current system time bool is_safe_to_send(uint32_t now_ms) const; // internal variables bool _initialised; // true once the driver has been initialised // attitude received from gimbal Quaternion _current_attitude_quat; // current attitude as a quaternion uint32_t _last_current_attitude_quat_ms; // system time _current_angle_rad was updated bool _recording_video; // true if recording video uint16_t _last_digital_zoom_param_value = 100; // last digital zoom parameter value sent to camera. 100 ~ 1000 (interval 100) uint16_t _last_optical_zoom_param_value = 100; // last optical zoom parameter value sent to camera. 100 ~ 250 (interval 10) struct { bool enabled; // true if zoom rate control is enabled int8_t dir; // zoom direction (-1 to zoom out, +1 to zoom in) uint32_t last_update_ms; // system time that zoom rate control last updated zoom } _zoom_rate_control; // firmware version received from gimbal struct { uint32_t last_request_ms; // system time of last request for firmware version bool received; // true once firmware version has been received char str[12] {}; // firmware version string (11 bytes + 1 null byte) uint32_t mav_ver; // version formatted for reporting to GCS via CAMERA_INFORMATION message } _firmware_version; // date and time handling struct { uint32_t last_request_ms; // system time that date/time was last requested bool set; // true once date/time has been set } _datetime; // capability handling enum class Capability : uint8_t { False = 0, True = 1, Unknown = 2, }; struct { bool received; // true if we have determined cameras capabilities uint32_t first_request_ms; // system time of first request for capabilities (used to timeout) uint32_t last_request_ms; // system time of last capability related parameter check Capability optical_zoom; // Yes if camera has optical zoom } capabilities = {false, 0, 0, Capability::Unknown}; // gimbal status handling enum class ErrorStatus : uint32_t { TAKING_PICTURE = 0x04, // currently taking a picture RECORDING_VIDEO = 0x08, // currently recording video CANNOT_TAKE_PIC = 0x20, TIME_NOT_SET = 0x10000, MEDIA_ERROR = 0x20000, LENS_ERROR = 0x40000, MOTOR_INIT_ERROR = 0x100000, MOTOR_OPERATION_ERROR = 0x200000, GIMBAL_CONTROL_ERROR = 0x400000, TEMP_WARNING = 0x1000000 }; struct { uint32_t error_status; // see ErrorStatus enum uint32_t video_remain_time; // max seconds of video that may be recorded before SD card is full uint32_t photo_remain_count; // max number of pics before SD card is full uint32_t sd_card_size_mb; // SD card size in MB uint32_t sd_card_free_mb; // SD card remaining size in MB uint16_t body; // body type uint16_t cmos; // cmos type uint16_t gimbal_pitch; // gimbal pitch angle uint16_t gimbal_roll; // gimbal roll angle uint16_t gimbal_yaw; // gimbal yaw angle uint16_t reserved1; uint8_t date_time[7]; // camera's date and time uint8_t reserved2; uint32_t exposure_time_us; // camera's exposure time in us uint16_t apeture; // cameras' aperture * 100 uint16_t iso_sensitivity; // camera's iso sensitivity } _status; // latest status received static_assert(sizeof(_status) == 48); // status should be 48 bytes struct { uint32_t last_request_ms; // system time that status was last requested uint32_t last_error_status; // last error status reported to user } _status_report; bool _motor_error; // true if status reports motor or control error (used for health reporting) bool _camera_error; // true if status reports camera error // DroneCAN related variables static bool _subscribed; // true once subscribed to receive DroneCAN messages static struct DetectedModules { AP_Mount_Xacti *driver; // pointer to Xacti backends AP_DroneCAN* ap_dronecan; // DroneCAN interface used by this backend uint8_t node_id; // DroneCAN node id associated by this backend } _detected_modules[AP_MOUNT_MAX_INSTANCES]; static HAL_Semaphore _sem_registry; // semaphore protecting access to _detected_modules table uint32_t last_send_gimbal_control_ms; // system time that send_gimbal_control was last called (used to slow down sends to 5hz) uint32_t last_send_copter_att_status_ms; // system time that send_copter_att_status was last called (used to slow down sends to 10hz) uint32_t last_send_getset_param_ms; // system time that a get or set parameter message was sent // queue of set parameter int32 items. set-parameter requests to camera are throttled to improve reliability struct SetParamQueueItem { Param param; // parameter (name) int32_t value; // parameter value }; ObjectArray *_set_param_int32_queue; // queue of set-parameter items }; #endif // HAL_MOUNT_XACTI_ENABLED