/* failsafe support Andrew Tridgell, December 2011 */ #include "Rover.h" #include /* our failsafe strategy is to detect main loop lockup and disarm. */ /* this failsafe_check function is called from the core timer interrupt at 1kHz. */ void Rover::failsafe_check() { static uint16_t last_ticks; static uint32_t last_timestamp; const uint32_t tnow = AP_HAL::micros(); const uint16_t ticks = scheduler.ticks(); if (ticks != last_ticks) { // the main loop is running, all is OK last_ticks = ticks; last_timestamp = tnow; return; } if (tnow - last_timestamp > 200000) { // we have gone at least 0.2 seconds since the main loop // ran. That means we're in trouble, or perhaps are in // an initialisation routine or log erase. disarm the motors // To-Do: log error if (arming.is_armed()) { // disarm motors arming.disarm(AP_Arming::Method::CPUFAILSAFE); } } } /* called to set/unset a failsafe event. */ void Rover::failsafe_trigger(uint8_t failsafe_type, const char* type_str, bool on) { uint8_t old_bits = failsafe.bits; if (on) { failsafe.bits |= failsafe_type; } else { failsafe.bits &= ~failsafe_type; } if (old_bits == 0 && failsafe.bits != 0) { // a failsafe event has started failsafe.start_time = millis(); } if (failsafe.triggered != 0 && failsafe.bits == 0) { // a failsafe event has ended gcs().send_text(MAV_SEVERITY_INFO, "%s Failsafe Cleared", type_str); } failsafe.triggered &= failsafe.bits; if ((failsafe.triggered == 0) && (failsafe.bits != 0) && (millis() - failsafe.start_time > g.fs_timeout * 1000) && (control_mode != &mode_rtl) && ((control_mode != &mode_hold || (g2.fs_options & (uint32_t)Failsafe_Options::Failsafe_Option_Active_In_Hold)))) { failsafe.triggered = failsafe.bits; gcs().send_text(MAV_SEVERITY_WARNING, "%s Failsafe", type_str); // clear rc overrides RC_Channels::clear_overrides(); if ((control_mode == &mode_auto) && ((failsafe_type == FAILSAFE_EVENT_THROTTLE && g.fs_throttle_enabled == FS_THR_ENABLED_CONTINUE_MISSION) || (failsafe_type == FAILSAFE_EVENT_GCS && g.fs_gcs_enabled == FS_GCS_ENABLED_CONTINUE_MISSION))) { // continue with mission in auto mode gcs().send_text(MAV_SEVERITY_WARNING, "Failsafe - Continuing Auto Mode"); } else { switch ((FailsafeAction)g.fs_action.get()) { case FailsafeAction::None: break; case FailsafeAction::SmartRTL: if (set_mode(mode_smartrtl, ModeReason::FAILSAFE)) { break; } FALLTHROUGH; case FailsafeAction::RTL: if (set_mode(mode_rtl, ModeReason::FAILSAFE)) { break; } FALLTHROUGH; case FailsafeAction::Hold: set_mode(mode_hold, ModeReason::FAILSAFE); break; case FailsafeAction::SmartRTL_Hold: if (!set_mode(mode_smartrtl, ModeReason::FAILSAFE)) { set_mode(mode_hold, ModeReason::FAILSAFE); } break; case FailsafeAction::Terminate: arming.disarm(AP_Arming::Method::FAILSAFE_ACTION_TERMINATE); break; } } } } void Rover::handle_battery_failsafe(const char* type_str, const int8_t action) { switch ((FailsafeAction)action) { case FailsafeAction::None: break; case FailsafeAction::SmartRTL: if (set_mode(mode_smartrtl, ModeReason::BATTERY_FAILSAFE)) { break; } FALLTHROUGH; case FailsafeAction::RTL: if (set_mode(mode_rtl, ModeReason::BATTERY_FAILSAFE)) { break; } FALLTHROUGH; case FailsafeAction::Hold: set_mode(mode_hold, ModeReason::BATTERY_FAILSAFE); break; case FailsafeAction::SmartRTL_Hold: if (!set_mode(mode_smartrtl, ModeReason::BATTERY_FAILSAFE)) { set_mode(mode_hold, ModeReason::BATTERY_FAILSAFE); } break; case FailsafeAction::Terminate: #if ADVANCED_FAILSAFE == ENABLED char battery_type_str[17]; snprintf(battery_type_str, 17, "%s battery", type_str); g2.afs.gcs_terminate(true, battery_type_str); #else arming.disarm(AP_Arming::Method::BATTERYFAILSAFE); #endif // ADVANCED_FAILSAFE == ENABLED break; } } #if ADVANCED_FAILSAFE == ENABLED /* check for AFS failsafe check */ void Rover::afs_fs_check(void) { // perform AFS failsafe checks g2.afs.check(failsafe.last_valid_rc_ms); } #endif