// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*- #ifndef __AP_RANGEFINDER_PULSEDLIGHTLRF_H__ #define __AP_RANGEFINDER_PULSEDLIGHTLRF_H__ #include "RangeFinder.h" #include "RangeFinder_Backend.h" /* Connection diagram * * ------------------------------------------------------------------------------------ * | J2-1(LED) J2-2(5V) J2-3(Enable) J2-4(Ref Clk) J2-5(GND) J2-6(GND) | * | | * | | * | J1-3(I2C Clk) J1-2(I2C Data) J1-1(GND) | * ------------------------------------------------------------------------------------ * * To connect to APM2.x: * APM I2C Clock <-> J1-3 * APM I2C Data <-> J1-2 * APM GND (from output Rail) <-> J1-1 J2-5 * APM 5V (from output Rail fed by ESC or BEC) <-> J2-2 * * APM2.x's I2C connector from outside edge: GND, Data, CLK, 3.3V */ // i2c address #define AP_RANGEFINDER_PULSEDLIGHTLRF_ADDR 0x42 // min and max distances #define AP_RANGEFINDER_PULSEDLIGHTLRF_MIN_DISTANCE 0 #define AP_RANGEFINDER_PULSEDLIGHTLRF_MAX_DISTANCE 1400 // registers #define AP_RANGEFINDER_PULSEDLIGHTLRF_MEASURE_REG 0x00 #define AP_RANGEFINDER_PULSEDLIGHTLRF_DISTHIGH_REG 0x0f // high byte of distance measurement #define AP_RANGEFINDER_PULSEDLIGHTLRF_DISTLOW_REG 0x10 // low byte of distance measurement // command register values #define AP_RANGEFINDER_PULSEDLIGHTLRF_MSRREG_ACQUIRE 0x04 // Varies based on sensor revision, 0x04 is newest, 0x61 is older class AP_RangeFinder_PulsedLightLRF : public AP_RangeFinder_Backend { public: // constructor AP_RangeFinder_PulsedLightLRF(RangeFinder &ranger, uint8_t instance, RangeFinder::RangeFinder_State &_state); // static detection function static bool detect(RangeFinder &ranger, uint8_t instance); // update state void update(void); private: // start a reading static bool start_reading(void); static bool get_reading(uint16_t &reading_cm); }; #endif // __AP_RANGEFINDER_PULSEDLIGHTLRF_H__