/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*- /* test CPU speed Andrew Tridgell September 2011 */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include const AP_HAL::HAL& hal = AP_HAL_BOARD_DRIVER; void setup() { } static void show_sizes(void) { hal.console->println("Type sizes:"); hal.console->printf("char : %d\n", sizeof(char)); hal.console->printf("short : %d\n", sizeof(short)); hal.console->printf("int : %d\n", sizeof(int)); hal.console->printf("long : %d\n", sizeof(long)); hal.console->printf("long long : %d\n", sizeof(long long)); hal.console->printf("bool : %d\n", sizeof(bool)); hal.console->printf("void* : %d\n", sizeof(void *)); hal.console->printf("printing NaN: %f\n", sqrt(-1.0f)); hal.console->printf("printing +Inf: %f\n", 1.0f/0.0f); hal.console->printf("printing -Inf: %f\n", -1.0f/0.0f); } #define TENTIMES(x) do { x; x; x; x; x; x; x; x; x; x; } while (0) #define FIFTYTIMES(x) do { TENTIMES(x); TENTIMES(x); TENTIMES(x); TENTIMES(x); TENTIMES(x); } while (0) #define TIMEIT(name, op, count) do { \ uint32_t us_end, us_start; \ us_start = hal.scheduler->micros(); \ for (uint8_t i=0; imicros(); \ hal.console->printf("%-10s %7.2f usec/call\n", name, double(us_end-us_start)/(count*50.0)); \ } while (0) volatile float v_f = 1.0; volatile float v_out; volatile double v_d = 1.0; volatile double v_out_d; volatile uint32_t v_32 = 1; volatile uint32_t v_out_32 = 1; volatile uint16_t v_16 = 1; volatile uint16_t v_out_16 = 1; volatile uint8_t v_8 = 1; volatile uint8_t v_out_8 = 1; volatile uint8_t mbuf1[128], mbuf2[128]; volatile uint64_t v_64 = 1; volatile uint64_t v_out_64 = 1; static void show_timings(void) { v_f = 1+(hal.scheduler->micros() % 5); v_out = 1+(hal.scheduler->micros() % 3); v_32 = 1+(hal.scheduler->micros() % 5); v_out_32 = 1+(hal.scheduler->micros() % 3); v_16 = 1+(hal.scheduler->micros() % 5); v_out_16 = 1+(hal.scheduler->micros() % 3); v_8 = 1+(hal.scheduler->micros() % 5); v_out_8 = 1+(hal.scheduler->micros() % 3); hal.console->println("Operation timings:"); hal.console->println("Note: timings for some operations are very data dependent"); TIMEIT("nop", asm volatile("nop"::), 255); TIMEIT("micros()", hal.scheduler->micros(), 200); TIMEIT("millis()", hal.scheduler->millis(), 200); TIMEIT("fadd", v_out += v_f, 100); TIMEIT("fsub", v_out -= v_f, 100); TIMEIT("fmul", v_out *= v_f, 100); TIMEIT("fdiv /=", v_out /= v_f, 100); TIMEIT("fdiv 2/x", v_out = 2.0f/v_f, 100); TIMEIT("dadd", v_out_d += v_d, 100); TIMEIT("dsub", v_out_d -= v_d, 100); TIMEIT("dmul", v_out_d *= v_d, 100); TIMEIT("ddiv", v_out_d /= v_d, 100); TIMEIT("sin()", v_out = sinf(v_f), 20); TIMEIT("cos()", v_out = cosf(v_f), 20); TIMEIT("tan()", v_out = tanf(v_f), 20); TIMEIT("acos()", v_out = acosf(v_f * 0.2), 20); TIMEIT("asin()", v_out = asinf(v_f * 0.2), 20); TIMEIT("atan2()", v_out = atan2f(v_f * 0.2, v_f * 0.3), 20); TIMEIT("sqrt()",v_out = sqrtf(v_f), 20); TIMEIT("iadd8", v_out_8 += v_8, 100); TIMEIT("isub8", v_out_8 -= v_8, 100); TIMEIT("imul8", v_out_8 *= v_8, 100); TIMEIT("idiv8", v_out_8 /= v_8, 100); TIMEIT("iadd16", v_out_16 += v_16, 100); TIMEIT("isub16", v_out_16 -= v_16, 100); TIMEIT("imul16", v_out_16 *= v_16, 100); TIMEIT("idiv16", v_out_16 /= v_16, 100); TIMEIT("iadd32", v_out_32 += v_32, 100); TIMEIT("isub32", v_out_32 -= v_32, 100); TIMEIT("imul32", v_out_32 *= v_32, 100); TIMEIT("idiv32", v_out_32 /= v_32, 100); TIMEIT("iadd64", v_out_64 += v_64, 100); TIMEIT("isub64", v_out_64 -= v_64, 100); TIMEIT("imul64", v_out_64 *= v_64, 100); TIMEIT("idiv64", v_out_64 /= v_64, 100); TIMEIT("memcpy128", memcpy((void*)mbuf1, (const void *)mbuf2, sizeof(mbuf1)), 20); TIMEIT("memset128", memset((void*)mbuf1, 1, sizeof(mbuf1)), 20); TIMEIT("delay(1)", hal.scheduler->delay(1), 5); } void loop() { show_sizes(); hal.console->println(""); show_timings(); hal.console->println(""); hal.scheduler->delay(3000); } AP_HAL_MAIN();