/*
  driver for TI CC2500 radio

  Many thanks to the cleanflight and betaflight projects
 */
#include "AP_Radio_config.h"

#if AP_RADIO_CC2500_ENABLED

#include <AP_HAL/AP_HAL.h>

// #pragma GCC optimize("O0")

#include <AP_Math/AP_Math.h>
#include "AP_Radio_cc2500.h"
#include <utility>
#include <stdio.h>
#include <StorageManager/StorageManager.h>
#include <AP_Notify/AP_Notify.h>
#include <GCS_MAVLink/GCS.h>
#include <AP_Math/crc.h>
#include <AP_Param/AP_Param.h>

#if CONFIG_HAL_BOARD == HAL_BOARD_CHIBIOS
#define TIMEOUT_PRIORITY 185
#define EVT_TIMEOUT EVENT_MASK(0)
#define EVT_IRQ EVENT_MASK(1)
#define EVT_BIND EVENT_MASK(2)
#endif

extern const AP_HAL::HAL& hal;

#define Debug(level, fmt, args...)   do { if ((level) <= get_debug_level()) { GCS_SEND_TEXT(MAV_SEVERITY_INFO, fmt, ##args); }} while (0)

// object instance for trampoline
AP_Radio_cc2500 *AP_Radio_cc2500::radio_singleton;
#if CONFIG_HAL_BOARD == HAL_BOARD_CHIBIOS
thread_t *AP_Radio_cc2500::_irq_handler_ctx;
virtual_timer_t AP_Radio_cc2500::timeout_vt;
uint32_t AP_Radio_cc2500::irq_time_us;
#endif

#define USE_D16_FORMAT 0

/*
  we are setup for a channel spacing of 0.3MHz, with channel 0 being 2403.6MHz

  For D16 protocol we select 47 channels from a max of 235 channels

  For SRT protocol we select 23 channels from a max of 235 channels,
  and avoid channels near to the WiFi channel of the Sonix video board
 */
#if USE_D16_FORMAT
#define NUM_CHANNELS 47
#define MAX_CHANNEL_NUMBER 0xEB
#define INTER_PACKET_MS 9
#define INTER_PACKET_INITIAL_MS (INTER_PACKET_MS+2)
#define PACKET_SENT_DELAY_US 3300
#else
#define NUM_CHANNELS 23
#define MAX_CHANNEL_NUMBER 0xEB
#define INTER_PACKET_MS 9
#define INTER_PACKET_INITIAL_MS (INTER_PACKET_MS+5)
#define PACKET_SENT_DELAY_US 2800
#endif

#define SEARCH_START_PKTS 40
#define AUTOBIND_CHANNEL 100

/*
  constructor
 */
AP_Radio_cc2500::AP_Radio_cc2500(AP_Radio &_radio) :
    AP_Radio_backend(_radio),
    cc2500(hal.spi->get_device("cc2500"))
{
    // link to instance for irq_trampoline
    radio_singleton = this;
}

/*
  initialise radio
 */
bool AP_Radio_cc2500::init(void)
{
#if CONFIG_HAL_BOARD == HAL_BOARD_CHIBIOS
    if (_irq_handler_ctx != nullptr) {
        AP_HAL::panic("AP_Radio_cc2500: double instantiation of irq_handler");
    }
    chVTObjectInit(&timeout_vt);
    _irq_handler_ctx = chThdCreateFromHeap(NULL,
                                           THD_WORKING_AREA_SIZE(2048),
                                           "radio_cc2500",
                                           TIMEOUT_PRIORITY,
                                           irq_handler_thd,
                                           NULL);
#endif

    return reset();
}

/*
  reset radio
 */
bool AP_Radio_cc2500::reset(void)
{
    if (!cc2500.lock_bus()) {
        return false;
    }

    radio_init();
    cc2500.unlock_bus();

    return true;
}

/*
  return statistics structure from radio
 */
const AP_Radio::stats &AP_Radio_cc2500::get_stats(void)
{
    return stats;
}

/*
  read one pwm channel from radio
 */
uint16_t AP_Radio_cc2500::read(uint8_t chan)
{
    if (chan >= CC2500_MAX_PWM_CHANNELS) {
        return 0;
    }
    return pwm_channels[chan];
}

/*
  update status - called from main thread
 */
void AP_Radio_cc2500::update(void)
{
    check_fw_ack();
}


/*
  return number of active channels
 */
uint8_t AP_Radio_cc2500::num_channels(void)
{
    uint32_t now = AP_HAL::millis();
    uint8_t chan = get_rssi_chan();
    if (chan > 0) {
        pwm_channels[chan-1] = t_status.rssi;
        chan_count = MAX(chan_count, chan);
    }

    chan = get_pps_chan();
    if (chan > 0) {
        pwm_channels[chan-1] = t_status.pps;
        chan_count = MAX(chan_count, chan);
    }

    chan = get_tx_rssi_chan();
    if (chan > 0) {
        pwm_channels[chan-1] = tx_rssi;
        chan_count = MAX(chan_count, chan);
    }

    chan = get_tx_pps_chan();
    if (chan > 0) {
        pwm_channels[chan-1] = tx_pps;
        chan_count = MAX(chan_count, chan);
    }
    pwm_channels[11] = (stats.recv_packets % 1000);
    chan_count = MAX(chan_count, 12);

    if (now - last_pps_ms > 1000) {
        last_pps_ms = now;
        t_status.pps = stats.recv_packets - last_stats.recv_packets;
        last_stats = stats;
        if (lost != 0 || timeouts != 0) {
            Debug(timeouts!=0?2:3,"lost=%u timeouts=%u TS=%u\n",
                  unsigned(lost), unsigned(timeouts), sizeof(struct telem_packet_cc2500));
        }
        lost=0;
        timeouts=0;
    }
    return chan_count;
}

/*
  return time of last receive in microseconds
 */
uint32_t AP_Radio_cc2500::last_recv_us(void)
{
    return packet_timer;
}

/*
  send len bytes as a single packet
 */
bool AP_Radio_cc2500::send(const uint8_t *pkt, uint16_t len)
{
    // disabled for now
    return false;
}

const AP_Radio_cc2500::config AP_Radio_cc2500::radio_config_GFSK[] = {
    /*
      radio config for GFSK with 57kHz deviation
    */
    {CC2500_00_IOCFG2,   0x01}, // GD2 high on RXFIFO filled or end of packet
    {CC2500_17_MCSM1,    0x03}, // RX->IDLE, CCA always, TX -> IDLE
    {CC2500_18_MCSM0,    0x08}, // XOSC expire 64, cal never
    {CC2500_06_PKTLEN,   0x0D}, // packet length 13
    {CC2500_07_PKTCTRL1, 0x0C}, // enable RSSI+LQI, no addr check, CRC autoflush, PQT=0
    {CC2500_08_PKTCTRL0, 0x44}, // fixed length mode, CRC, FIFO enable, whitening
    {CC2500_3E_PATABLE,  0xFF}, // initially max power
    {CC2500_0B_FSCTRL1,  0x0A}, // IF=253.90625kHz assuming 26MHz crystal
    {CC2500_0C_FSCTRL0,  0x00}, // freqoffs = 0
    {CC2500_0D_FREQ2,    0x5C}, // freq control high
    {CC2500_0E_FREQ1,    0x76}, // freq control middle
    {CC2500_0F_FREQ0,    0x27}, // freq control low
    {CC2500_10_MDMCFG4,  0x8C}, // filter bandwidth 203kHz
    {CC2500_11_MDMCFG3,  0x2F}, // data rate 120kbaud
    {CC2500_12_MDMCFG2,  0x13}, // 30/32 sync word bits, no manchester, GFSK, DC filter enabled
    {CC2500_13_MDMCFG1,  0xA3}, // chan spacing exponent 3, preamble 4 bytes, FEC enabled
    {CC2500_14_MDMCFG0,  0x7A}, // chan spacing 299.926757kHz for 26MHz crystal
    {CC2500_15_DEVIATN,  0x51}, // modem deviation 57kHz for 26MHz crystal
    {CC2500_19_FOCCFG,   0x16}, // frequency offset compensation
    {CC2500_1A_BSCFG,    0x6C}, // bit sync config
    {CC2500_1B_AGCCTRL2, 0x43}, // target amplitude 33dB
    {CC2500_1C_AGCCTRL1, 0x40}, // AGC control 2
    {CC2500_1D_AGCCTRL0, 0x91}, // AGC control 0
    {CC2500_21_FREND1,   0x56}, // frontend config1
    {CC2500_22_FREND0,   0x10}, // frontend config0
    {CC2500_23_FSCAL3,   0xA9}, // frequency synth cal3
    {CC2500_24_FSCAL2,   0x0A}, // frequency synth cal2
    {CC2500_25_FSCAL1,   0x00}, // frequency synth cal1
    {CC2500_26_FSCAL0,   0x11}, // frequency synth cal0
    {CC2500_29_FSTEST,   0x59}, // test bits
    {CC2500_2C_TEST2,    0x88}, // test settings
    {CC2500_2D_TEST1,    0x31}, // test settings
    {CC2500_2E_TEST0,    0x0B}, // test settings
    {CC2500_03_FIFOTHR,  0x07}, // TX fifo threashold 33, RX fifo threshold 32
    {CC2500_09_ADDR,     0x00}, // device address 0 (broadcast)
};

const AP_Radio_cc2500::config AP_Radio_cc2500::radio_config[] = {
    /* config for both TX and RX (from SmartRF Studio)
       setup for MSK at 120kbaud, FEC enabled, whitening enabled, base freq 2403.999756MHz
       channel spacing 299.926758, crystal 26MHz, RX filter bw 203.125kHz
    */
    {CC2500_06_PKTLEN,   0x0D},
    {CC2500_07_PKTCTRL1, 0x0C},
    {CC2500_08_PKTCTRL0, 0x44},
    {CC2500_0B_FSCTRL1,  0x0A},
    {CC2500_0D_FREQ2,    0x5C},
    {CC2500_0E_FREQ1,    0x76},
    {CC2500_0F_FREQ0,    0x27},
    {CC2500_11_MDMCFG3,  0x2F},
    {CC2500_12_MDMCFG2,  0x73},
    {CC2500_13_MDMCFG1,  0xA3},
    {CC2500_14_MDMCFG0,  0x7A},
    {CC2500_15_DEVIATN,  0x70},
    {CC2500_17_MCSM1,    0x03},
    {CC2500_18_MCSM0,    0x08},
    {CC2500_19_FOCCFG,   0x16},
    {CC2500_1B_AGCCTRL2, 0x43},
    {CC2500_23_FSCAL3,   0xEA},
    {CC2500_25_FSCAL1,   0x00},
    {CC2500_26_FSCAL0,   0x11},
    {CC2500_2B_AGCTEST,  0x3E},
    {CC2500_03_FIFOTHR,  0x07}, // TX fifo threashold 33, RX fifo threshold 32

    // config specific to RX
    {CC2500_00_IOCFG2,   0x01}, // GD2 high on RXFIFO filled or end of packet
    {CC2500_17_MCSM1,    0x03}, // RX->IDLE, CCA always, TX -> IDLE
    {CC2500_18_MCSM0,    0x08}, // XOSC expire 64, cal never
    {CC2500_3E_PATABLE,  0xFF}, // initially max power
};

const uint16_t CRCTable[] = {
    0x0000,0x1189,0x2312,0x329b,0x4624,0x57ad,0x6536,0x74bf,
    0x8c48,0x9dc1,0xaf5a,0xbed3,0xca6c,0xdbe5,0xe97e,0xf8f7,
    0x1081,0x0108,0x3393,0x221a,0x56a5,0x472c,0x75b7,0x643e,
    0x9cc9,0x8d40,0xbfdb,0xae52,0xdaed,0xcb64,0xf9ff,0xe876,
    0x2102,0x308b,0x0210,0x1399,0x6726,0x76af,0x4434,0x55bd,
    0xad4a,0xbcc3,0x8e58,0x9fd1,0xeb6e,0xfae7,0xc87c,0xd9f5,
    0x3183,0x200a,0x1291,0x0318,0x77a7,0x662e,0x54b5,0x453c,
    0xbdcb,0xac42,0x9ed9,0x8f50,0xfbef,0xea66,0xd8fd,0xc974,
    0x4204,0x538d,0x6116,0x709f,0x0420,0x15a9,0x2732,0x36bb,
    0xce4c,0xdfc5,0xed5e,0xfcd7,0x8868,0x99e1,0xab7a,0xbaf3,
    0x5285,0x430c,0x7197,0x601e,0x14a1,0x0528,0x37b3,0x263a,
    0xdecd,0xcf44,0xfddf,0xec56,0x98e9,0x8960,0xbbfb,0xaa72,
    0x6306,0x728f,0x4014,0x519d,0x2522,0x34ab,0x0630,0x17b9,
    0xef4e,0xfec7,0xcc5c,0xddd5,0xa96a,0xb8e3,0x8a78,0x9bf1,
    0x7387,0x620e,0x5095,0x411c,0x35a3,0x242a,0x16b1,0x0738,
    0xffcf,0xee46,0xdcdd,0xcd54,0xb9eb,0xa862,0x9af9,0x8b70,
    0x8408,0x9581,0xa71a,0xb693,0xc22c,0xd3a5,0xe13e,0xf0b7,
    0x0840,0x19c9,0x2b52,0x3adb,0x4e64,0x5fed,0x6d76,0x7cff,
    0x9489,0x8500,0xb79b,0xa612,0xd2ad,0xc324,0xf1bf,0xe036,
    0x18c1,0x0948,0x3bd3,0x2a5a,0x5ee5,0x4f6c,0x7df7,0x6c7e,
    0xa50a,0xb483,0x8618,0x9791,0xe32e,0xf2a7,0xc03c,0xd1b5,
    0x2942,0x38cb,0x0a50,0x1bd9,0x6f66,0x7eef,0x4c74,0x5dfd,
    0xb58b,0xa402,0x9699,0x8710,0xf3af,0xe226,0xd0bd,0xc134,
    0x39c3,0x284a,0x1ad1,0x0b58,0x7fe7,0x6e6e,0x5cf5,0x4d7c,
    0xc60c,0xd785,0xe51e,0xf497,0x8028,0x91a1,0xa33a,0xb2b3,
    0x4a44,0x5bcd,0x6956,0x78df,0x0c60,0x1de9,0x2f72,0x3efb,
    0xd68d,0xc704,0xf59f,0xe416,0x90a9,0x8120,0xb3bb,0xa232,
    0x5ac5,0x4b4c,0x79d7,0x685e,0x1ce1,0x0d68,0x3ff3,0x2e7a,
    0xe70e,0xf687,0xc41c,0xd595,0xa12a,0xb0a3,0x8238,0x93b1,
    0x6b46,0x7acf,0x4854,0x59dd,0x2d62,0x3ceb,0x0e70,0x1ff9,
    0xf78f,0xe606,0xd49d,0xc514,0xb1ab,0xa022,0x92b9,0x8330,
    0x7bc7,0x6a4e,0x58d5,0x495c,0x3de3,0x2c6a,0x1ef1,0x0f78
};

/*
  static probe function for radio auto-detect
 */
bool AP_Radio_cc2500::probe(void)
{
    auto dev = hal.spi->get_device("cc2500");
    dev->get_semaphore()->take_blocking();
    uint8_t r1=0, r2=0;
    if (!dev->read_registers(CC2500_30_PARTNUM | CC2500_READ_BURST | CC2500_READ_SINGLE, &r1, 1) || r1 != 0x80 ||
        !dev->read_registers(CC2500_31_VERSION | CC2500_READ_BURST | CC2500_READ_SINGLE, &r2, 1) || r2 != 0x03) {
        dev->get_semaphore()->give();
        return false;
    }
    dev->get_semaphore()->give();
    return true;
}

/*
  initialise the radio
 */
void AP_Radio_cc2500::radio_init(void)
{
    if (cc2500.ReadReg(CC2500_30_PARTNUM | CC2500_READ_BURST) != 0x80 ||
        cc2500.ReadReg(CC2500_31_VERSION | CC2500_READ_BURST) != 0x03) {
        Debug(1, "cc2500: radio not found\n");
        return;
    }

    Debug(1, "cc2500: radio_init starting\n");

    cc2500.Reset();
    hal.scheduler->delay_microseconds(100);
    if (get_protocol() == AP_Radio::PROTOCOL_CC2500_GFSK) {
        Debug(1,"Using GFSK configuration\n");
        for (uint8_t i=0; i<ARRAY_SIZE(radio_config_GFSK); i++) {
            cc2500.WriteRegCheck(radio_config_GFSK[i].reg, radio_config_GFSK[i].value);
        }
    } else {
        for (uint8_t i=0; i<ARRAY_SIZE(radio_config); i++) {
            cc2500.WriteRegCheck(radio_config[i].reg, radio_config[i].value);
        }
    }

    cc2500.Strobe(CC2500_SIDLE);	// Go to idle...

    hal.scheduler->delay_microseconds(10*1000);

    // setup handler for rising edge of IRQ pin
    hal.gpio->attach_interrupt(HAL_GPIO_RADIO_IRQ, trigger_irq_radio_event, AP_HAL::GPIO::INTERRUPT_RISING);

    // fill in rxid for use in double bind prevention
    char sysid[50] {};
    hal.util->get_system_id(sysid);
    uint16_t sysid_crc = calc_crc((const uint8_t *)sysid, strnlen(sysid, sizeof(sysid)));
    if (sysid_crc == 0) {
        sysid_crc = 1;
    }
    t_status.rxid[0] = sysid_crc & 0xFF;
    t_status.rxid[1] = sysid_crc >> 8;

    initTuneRx();

    if (load_bind_info()) {
        Debug(3,"Loaded bind info\n");
    } else {
        listLength = NUM_CHANNELS;
        bindOffset = 0;
        setup_hopping_table_SRT();
    }

    uint8_t factory_test = get_factory_test();
    if (factory_test != 0) {
        bindTxId[0] = uint8_t(factory_test * 17);
        bindTxId[1] = uint8_t(~bindTxId[0]);
        setup_hopping_table_SRT();
    }

    // we go straight into search, and rely on autobind
    initialiseData(0);
    protocolState = STATE_SEARCH;
    packet_timer = AP_HAL::micros();
    chanskip = 1;
    nextChannel(1);

    // set default autobind power to suit the cc2500
    AP_Param::set_default_by_name("BRD_RADIO_ABLVL", 90);

    chVTSet(&timeout_vt, chTimeMS2I(INTER_PACKET_INITIAL_MS), trigger_timeout_event, nullptr);

}

void AP_Radio_cc2500::trigger_irq_radio_event()
{
    //we are called from ISR context
    chSysLockFromISR();
    irq_time_us = AP_HAL::micros();
    chEvtSignalI(_irq_handler_ctx, EVT_IRQ);
    chSysUnlockFromISR();
}

void AP_Radio_cc2500::trigger_timeout_event(virtual_timer_t* vt, void *arg)
{
    (void)arg;
    //we are called from ISR context
    chSysLockFromISR();
    chVTSetI(&timeout_vt, chTimeMS2I(INTER_PACKET_INITIAL_MS), trigger_timeout_event, nullptr);
    chEvtSignalI(_irq_handler_ctx, EVT_TIMEOUT);
    chSysUnlockFromISR();
}

void AP_Radio_cc2500::start_recv_bind(void)
{
    chan_count = 0;
    packet_timer = AP_HAL::micros();
    chEvtSignal(_irq_handler_ctx, EVT_BIND);
    Debug(1,"Starting bind\n");
}

// handle a data96 mavlink packet for fw upload
void AP_Radio_cc2500::handle_data_packet(mavlink_channel_t chan, const mavlink_data96_t &m)
{
    uint32_t ofs=0;
    memcpy(&ofs, &m.data[0], 4);
    Debug(4, "got data96 of len %u from chan %u at offset %u\n", m.len, chan, unsigned(ofs));
    if (sem.take_nonblocking()) {
        fwupload.chan = chan;
        fwupload.need_ack = false;
        fwupload.offset = ofs;
        fwupload.length = MIN(m.len-4, 92);
        fwupload.acked = 0;
        fwupload.sequence++;
        if (m.type == 43) {
            // sending a tune to play - for development testing
            fwupload.fw_type = TELEM_PLAY;
            fwupload.length = MIN(m.len, 90);
            fwupload.offset = 0;
            memcpy(&fwupload.pending_data[0], &m.data[0], fwupload.length);
        } else {
            // sending a chunk of firmware OTA upload
            fwupload.fw_type = TELEM_FW;
            memcpy(&fwupload.pending_data[0], &m.data[4], fwupload.length);
        }
        sem.give();
    }
}

/*
  handle a FrSky D16 packet
 */
bool AP_Radio_cc2500::handle_D16_packet(const uint8_t *packet)
{
    if (packet[0] != 0x1D) {
        return false;
    }
    if (packet[1] != bindTxId[0] ||
        packet[2] != bindTxId[1]) {
        Debug(3, "p1=%02x p2=%02x p6=%02x\n", packet[1], packet[2], packet[6]);
        // not for us
        return false;
    }
    if (packet[7] == 0x00 ||
        packet[7] == 0x20 ||
        packet[7] == 0x10 ||
        packet[7] == 0x12 ||
        packet[7] == 0x14 ||
        packet[7] == 0x16 ||
        packet[7] == 0x18 ||
        packet[7] == 0x1A ||
        packet[7] == 0x1C ||
        packet[7] == 0x1E) {
        // channel packet or range check packet
        parse_frSkyX(packet);

        packet3 = packet[3];

        uint8_t hop_chan = packet[4] & 0x3F;
        uint8_t skip = (packet[4]>>6) | (packet[5]<<2);
        if (channr != hop_chan) {
            Debug(2, "channr=%u hop_chan=%u\n", channr, hop_chan);
        }
        channr = hop_chan;
        if (chanskip != skip) {
            Debug(2, "chanskip=%u skip=%u\n", chanskip, skip);
        }
        chanskip = skip;
        return true;
    }
    return false;
}

/*
  handle a SRT packet
 */
bool AP_Radio_cc2500::handle_SRT_packet(const uint8_t *packet)
{
    const struct srt_packet *pkt = (const struct srt_packet *)packet;
    if (pkt->length != sizeof(struct srt_packet)-1 ||
        pkt->txid[0] != bindTxId[0] ||
        pkt->txid[1] != bindTxId[1]) {
        Debug(3, "len=%u p1=%02x p2=%02x\n", pkt->length, pkt->txid[0], pkt->txid[1]);
        // not for us
        return false;
    }
    if (pkt->version != 1) {
        // only support version 1 so far
        return false;
    }
    uint16_t chan_new[CC2500_MAX_PWM_CHANNELS];
    memcpy(chan_new, pwm_channels, sizeof(pwm_channels));

    chan_new[0] = pkt->chan1 + 1000 + ((pkt->chan_high&0xC0)<<2);
    chan_new[1] = pkt->chan2 + 1000 + ((pkt->chan_high&0x30)<<4);
    chan_new[2] = pkt->chan3 + 1000 + ((pkt->chan_high&0x0C)<<6);
    chan_new[3] = pkt->chan4 + 1000 + ((pkt->chan_high&0x03)<<8);
    // we map the buttons onto two PWM channels for ease of integration with ArduPilot
    chan_new[4] = 1000 + (pkt->buttons & 0x7) * 100;
    chan_new[5] = 1000 + (pkt->buttons >> 3) * 100;

    // cope with mode1/mode2
    map_stick_mode(chan_new);

    memcpy(pwm_channels, chan_new, sizeof(pwm_channels));

    uint8_t data = pkt->data;
    /*
      decode special data field
     */
    switch (pkt->pkt_type) {
    case PKTYPE_VOLTAGE:
        // voltage from TX is in 0.025 volt units. Convert to 0.01 volt units for easier display
        pwm_channels[6] = data * 4;
        break;
    case PKTYPE_YEAR:
        tx_date.firmware_year = data;
        break;
    case PKTYPE_MONTH:
        tx_date.firmware_month = data;
        break;
    case PKTYPE_DAY:
        tx_date.firmware_day = data;
        break;
    case PKTYPE_TELEM_RSSI:
        tx_rssi = data;
        break;
    case PKTYPE_TELEM_PPS:
        tx_pps = data;
        if (!have_tx_pps) {
            check_double_bind();
        }
        have_tx_pps = true;
        break;
    case PKTYPE_BL_VERSION:
        // unused so far for cc2500
        break;
    case PKTYPE_RXID1:
        if (data != t_status.rxid[0]) {
            Debug(4, "Double bind1 - disconnecting\n");
            start_recv_bind();
        }
        break;
    case PKTYPE_RXID2:
        if (data != t_status.rxid[1]) {
            Debug(4, "Double bind2 - disconnecting\n");
            start_recv_bind();
        }
        break;
    case PKTYPE_FW_ACK: {
        // got an fw upload ack
        Debug(4, "ack %u seq=%u acked=%u length=%u len=%u\n",
              data, fwupload.sequence, unsigned(fwupload.acked), unsigned(fwupload.length), fwupload.len);
        if (fwupload.sequence == data && sem.take_nonblocking()) {
            fwupload.sequence++;
            fwupload.acked += fwupload.len;
            if (fwupload.acked == fwupload.length) {
                // trigger send of DATA16 ack to client
                fwupload.need_ack = true;
            }
            sem.give();
        }
        break;
    }
    }

    if (chan_count < 7) {
        chan_count = 7;
    }

    if (pkt->channr != channr) {
        Debug(2, "channr=%u hop_chan=%u\n", channr, pkt->channr);
        channr = pkt->channr;
    }
    if (pkt->chanskip != chanskip) {
        Debug(2, "chanskip=%u skip=%u\n", chanskip, pkt->chanskip);
        chanskip = pkt->chanskip;
    }
    return true;
}

/*
  see if we have already assigned a channel
 */
bool AP_Radio_cc2500::have_channel(uint8_t channel, uint8_t count, uint8_t loop)
{
    uint8_t i;
    for (i=0; i<count; i++) {
        if (bindHopData[i] == channel) {
            return true;
        }
        if (loop < 5) {
            int separation = ((int)bindHopData[i]) - (int)channel;
            if (separation < 0) {
                separation = -separation;
            }
            if (separation < 4) {
                // try if possible to stay at least 4 channels from existing channels
                return true;
            }
        }
    }
    return false;
}

/*
  mapping from WiFi channel number minus 1 to cc2500 channel
  number. WiFi channels are separated by 5MHz starting at 2412 MHz,
  except for channel 14, which has a 12MHz separation. We represent
  channel 14 as 255 as we want to keep this table 8 bit.
 */
static const uint8_t wifi_chan_map[14] = {
    28, 44, 61, 78, 94, 111, 128, 144, 161, 178, 194, 211, 228, 255
};

/*
  create hopping table for SRT protocol
 */
void AP_Radio_cc2500::setup_hopping_table_SRT(void)
{
    uint8_t val;
    uint8_t channel = bindTxId[0] % 127;
    uint8_t channel_spacing = bindTxId[1] % 127;
    uint8_t i;
    uint8_t wifi_chan = t_status.wifi_chan;
    uint8_t cc_wifi_mid, cc_wifi_low, cc_wifi_high;
    const uint8_t wifi_separation = 65;

    if (wifi_chan == 0 || wifi_chan > 14) {
        wifi_chan = 9;
    }
    cc_wifi_mid = wifi_chan_map[wifi_chan-1];
    if (cc_wifi_mid < wifi_separation) {
        cc_wifi_low = 0;
    } else {
        cc_wifi_low = cc_wifi_mid - wifi_separation;
    }
    if (cc_wifi_mid > 225) {
        cc_wifi_high = 255;
    } else {
        cc_wifi_high = cc_wifi_mid + wifi_separation;
    }

    if (channel_spacing < 7) {
        channel_spacing += 7;
    }

    for (i=0; i<NUM_CHANNELS; i++) {
        // loop is to prevent any possibility of non-completion
        uint8_t loop = 0;
        do {
            channel = (channel+channel_spacing) % MAX_CHANNEL_NUMBER;

            if ((channel <= cc_wifi_low || channel >= cc_wifi_high) && !have_channel(channel, i, loop)) {
                // accept if not in wifi range and not already allocated
                break;
            }
        } while (loop++ < 100);
        val=channel;
        // channels to avoid from D16 code, not properly understood
        if ((val==0x00) || (val==0x5A) || (val==0xDC)) {
            val++;
        }
        bindHopData[i] = val;
    }

    if (get_protocol() != AP_Radio::PROTOCOL_CC2500_GFSK) {
        // additional loop to fix any close channels
        for (i=0; i<NUM_CHANNELS; i++) {
            // first loop only accepts channels that are outside wifi band
            if (have_channel(bindHopData[i], i, 0)) {
                uint8_t c;
                for (c = 0; c<MAX_CHANNEL_NUMBER; c++) {
                    if ((channel <= cc_wifi_low || channel >= cc_wifi_high) && !have_channel(c, i, 0)) {
                        bindHopData[i] = c;
                        break;
                    }
                }
            }
            // if that fails then accept channels within the wifi band
            if (have_channel(bindHopData[i], i, 0)) {
                uint8_t c;
                for (c = 0; c<MAX_CHANNEL_NUMBER; c++) {
                    if (!have_channel(c, i, 0)) {
                        bindHopData[i] = c;
                        break;
                    }
                }
            }
        }
    }

    for (i=0; i<NUM_CHANNELS; i++) {
        Debug(3, "%u ", bindHopData[i]);
    }
    Debug(3, "\n");
    last_wifi_channel = t_status.wifi_chan;
    Debug(2, "Setup hopping for 0x%x:0x%0x WiFi %u %u-%u spc:%u\n",
          bindTxId[0], bindTxId[1],
          wifi_chan, cc_wifi_low, cc_wifi_high, channel_spacing);
}


/*
  handle a autobind packet
 */
bool AP_Radio_cc2500::handle_autobind_packet(const uint8_t *packet, uint8_t lqi)
{
    if (get_factory_test() != 0) {
        // no autobind in factory test mode
        return false;
    }
    const struct autobind_packet_cc2500 *pkt = (const struct autobind_packet_cc2500 *)packet;
    if (stats.recv_packets != 0) {
        // don't process autobind packets once we're connected
        Debug(4,"autobind discard\n");
        return false;
    }
    if (pkt->length != sizeof(struct autobind_packet_cc2500)-1 ||
        pkt->magic1 != 0xC5 ||
        pkt->magic2 != 0xA2 ||
        pkt->txid[0] != uint8_t(~pkt->txid_inverse[0]) ||
        pkt->txid[1] != uint8_t(~pkt->txid_inverse[1])) {
        Debug(3, "AB l=%u el=%u m1=%02x m2=%02x %02x:%02x %02x:%02x %02x:%02x\n",
              pkt->length, sizeof(struct autobind_packet_cc2500)-1, pkt->magic1, pkt->magic2,
              pkt->txid[0], pkt->txid[1], uint8_t(~pkt->txid_inverse[0]), uint8_t(~pkt->txid_inverse[1]),
              pkt->crc[0], pkt->crc[1]);
        // not a valid autobind packet
        return false;
    }
    for (uint8_t i=0; i<sizeof(pkt->pad); i++) {
        if (pkt->pad[i] != i+1) {
            Debug(3, "AB pad[%u]=%u\n", i, pkt->pad[i]);
            return false;
        }
    }
    uint16_t lcrc = calc_crc(packet,sizeof(*pkt)-2);
    if ((lcrc>>8)!=pkt->crc[0] || (lcrc&0x00FF)!=pkt->crc[1]) {
        Debug(3, "AB bad CRC\n");
        return false;
    }

    uint8_t rssi_raw = packet[sizeof(struct autobind_packet_cc2500)];
    uint8_t rssi_dbm = map_RSSI_to_dBm(rssi_raw);

    if (lqi >= 50) {
        Debug(3,"autobind bad LQI %u\n", lqi);
        return false;
    }

    if (rssi_dbm < get_autobind_rssi()) {
        Debug(1,"autobind RSSI %u needs %u\n", (unsigned)rssi_dbm, (unsigned)get_autobind_rssi());
        return false;
    }
    Debug(1,"autobind RSSI %u above %u lqi=%u bofs=%d\n", (unsigned)rssi_dbm, (unsigned)get_autobind_rssi(), lqi, auto_bindOffset);

    bindOffset = auto_bindOffset;

    bindTxId[0] = pkt->txid[0];
    bindTxId[1] = pkt->txid[1];

    listLength = NUM_CHANNELS;
    t_status.wifi_chan = pkt->wifi_chan;

    setup_hopping_table_SRT();

    Debug(1,"Saved bind data\n");
    save_bind_info();

    return true;
}

/*
  map a raw RSSI value to a dBm value
 */
uint8_t AP_Radio_cc2500::map_RSSI_to_dBm(uint8_t rssi_raw)
{
    float rssi_dbm;
    if (rssi_raw >= 128) {
        rssi_dbm = ((((uint16_t)rssi_raw) * 18) >> 5) - 82;
    } else {
        rssi_dbm = ((((uint16_t)rssi_raw) * 18) >> 5) + 65;
    }
    return rssi_dbm;
}

// main IRQ handler
void AP_Radio_cc2500::irq_handler(void)
{
    uint8_t ccLen;
    bool matched = false;
    do {
        ccLen = cc2500.ReadReg(CC2500_3B_RXBYTES | CC2500_READ_BURST);
        hal.scheduler->delay_microseconds(20);
        uint8_t ccLen2 = cc2500.ReadReg(CC2500_3B_RXBYTES | CC2500_READ_BURST);
        matched = (ccLen == ccLen2);
    } while (!matched);

    if (ccLen & 0x80) {
        Debug(6,"Fifo overflow %02x\n", ccLen);
        // RX FIFO overflow
        cc2500.Strobe(CC2500_SFRX);
        cc2500.Strobe(CC2500_SRX);
        return;
    }

    uint8_t packet[ccLen];
    cc2500.ReadFifo(packet, ccLen);

    if (get_fcc_test() != 0) {
        // don't process interrupts in FCCTEST mode
        return;
    }

    if (ccLen != 32 &&
        ccLen != sizeof(srt_packet)+2 &&
        ccLen != sizeof(autobind_packet_cc2500)+2) {
        cc2500.Strobe(CC2500_SFRX);
        cc2500.Strobe(CC2500_SRX);
        Debug(4, "bad len %u SRT=%u AB=%u\n", ccLen,
              sizeof(srt_packet)+2,
              sizeof(autobind_packet_cc2500)+2);
        return;
    }

    if (get_debug_level() > 6) {
        Debug(6, "CC2500 IRQ state=%u\n", unsigned(protocolState));
        Debug(6,"len=%u\n", ccLen);
        for (uint8_t i=0; i<ccLen; i++) {
            Debug(6, "%02x:%02x ", i, packet[i]);
            if ((i+1) % 16 == 0) {
                Debug(6, "\n");
            }
        }
        if (ccLen % 16 != 0) {
            Debug(6, "\n");
        }
    }

    if (!check_crc(ccLen, packet)) {
        Debug(4, "bad CRC ccLen=%u\n", ccLen);
        return;
    }

    switch (protocolState) {
    case STATE_BIND_TUNING:
        tuneRx(ccLen, packet);
        break;

    case STATE_BIND_BINDING:
        if (getBindData(ccLen, packet)) {
            Debug(2,"Bind complete\n");
            protocolState = STATE_BIND_COMPLETE;
        }
        break;

    case STATE_BIND_COMPLETE:
        protocolState = STATE_STARTING;
        save_bind_info();
        Debug(3,"listLength=%u\n", listLength);
        Debug(3,"Saved bind info\n");
        break;

    case STATE_STARTING:
        listLength = NUM_CHANNELS;
        initialiseData(0);
        protocolState = STATE_SEARCH;
        chanskip = 1;
        nextChannel(1);
        break;

    case STATE_SEARCH:
        protocolState = STATE_DATA;
    // fallthrough

    case STATE_DATA: {
        bool ok = false;
        if (ccLen == 32) {
            ok = handle_D16_packet(packet);
        } else if (ccLen == sizeof(srt_packet)+2) {
            ok = handle_SRT_packet(packet);
            if (!ok) {
                uint8_t Lqi = packet[ccLen - 1] & 0x7F;
                ok = handle_autobind_packet(packet, Lqi);
            }
        }
        if (ok) {
            // get RSSI value from status byte
            uint8_t rssi_raw = packet[ccLen-2];
            float rssi_dbm = map_RSSI_to_dBm(rssi_raw);
            rssi_filtered = 0.95 * rssi_filtered + 0.05 * rssi_dbm;
            t_status.rssi = uint8_t(MAX(rssi_filtered, 1));

            if (stats.recv_packets == 0) {
                Debug(3,"cc2500: got 1st packet\n");
            }
            stats.recv_packets++;

            packet_timer = irq_time_us;
            chVTSet(&timeout_vt, chTimeMS2I(INTER_PACKET_INITIAL_MS), trigger_timeout_event, nullptr);

            cc2500.Strobe(CC2500_SIDLE);
            if (get_telem_enable()) {
                cc2500.SetPower(get_transmit_power());
                if (ccLen == 32 || get_protocol() == AP_Radio::PROTOCOL_D16) {
                    send_D16_telemetry();
                } else {
                    if (have_tx_pps) {
                        /* we don't start sending telemetry until we have the tx_pps rate. This allows us
                           to reliably detect double-bind, where one TX is bound to multiple RX
                        */
                        send_SRT_telemetry();
                    }
                }

                // now we sleep for enough time for the packet to be
                // transmitted. We can safely sleep here as we have a
                // dedicated thread for radio processing.
                cc2500.unlock_bus();
                hal.scheduler->delay_microseconds(PACKET_SENT_DELAY_US);
                cc2500.lock_bus();
            }

            nextChannel(chanskip);
        }
        break;
    }

    case STATE_FCCTEST:
        // nothing to do, all done in timeout code
        Debug(3,"IRQ in FCCTEST state\n");
        break;

    default:
        Debug(2,"state %u\n", (unsigned)protocolState);
        break;
    }
}

/*
  setup for the 6 possible FCC channel values (3 normal, 3 CW)
 */
void AP_Radio_cc2500::set_fcc_channel(void)
{
    uint8_t chan = MAX_CHANNEL_NUMBER/2;
    switch (get_fcc_test()) {
    case 1:
    case 4:
        chan = 0;
        break;
    case 2:
    case 5:
        chan = MAX_CHANNEL_NUMBER/2;
        break;
    case 3:
    case 6:
        chan = MAX_CHANNEL_NUMBER-1;
        break;
    }
    setChannel(chan);
}

// handle timeout IRQ
void AP_Radio_cc2500::irq_timeout(void)
{
    if (get_fcc_test() != 0 && protocolState != STATE_FCCTEST) {
        protocolState = STATE_FCCTEST;
        last_fcc_chan = 0;
        set_fcc_channel();
        send_SRT_telemetry();
    }

    switch (protocolState) {
    case STATE_BIND_TUNING: {
        if (bindOffset >= 126) {
            if (check_best_LQI()) {
                return;
            }
            bindOffset = -126;
        }
        uint32_t now = AP_HAL::millis();
        if (now - timeTunedMs > 20) {
            timeTunedMs = now;
            bindOffset += 5;
            Debug(6,"bindOffset=%d\n", int(bindOffset));
            cc2500.Strobe(CC2500_SIDLE);
            cc2500.WriteRegCheck(CC2500_0C_FSCTRL0, (uint8_t)bindOffset);
            cc2500.Strobe(CC2500_SFRX);
            cc2500.Strobe(CC2500_SRX);
        }
        break;
    }

    case STATE_DATA: {
        uint32_t now = AP_HAL::micros();

        if (now - packet_timer > SEARCH_START_PKTS*INTER_PACKET_MS*1000UL) {
            Debug(3,"searching %u\n", unsigned(now - packet_timer));
            cc2500.Strobe(CC2500_SIDLE);
            cc2500.Strobe(CC2500_SFRX);
            nextChannel(1);
            cc2500.Strobe(CC2500_SRX);
            timeouts++;
            protocolState = STATE_SEARCH;
            search_count = 0;
        } else {
            // to keep the timeouts a constant time behind the
            // expected time we need to set the timeout to the
            // inter-packet delay again now
            chVTSet(&timeout_vt, chTimeMS2I(INTER_PACKET_MS), trigger_timeout_event, nullptr);
            nextChannel(chanskip);
            lost++;
        }
        break;
    }

    case STATE_SEARCH: {
        uint32_t now = AP_HAL::millis();
        search_count++;
        if (stats.recv_packets == 0 &&
            get_autobind_time() != 0 &&
            get_factory_test() == 0 &&
            (AP_HAL::micros() - packet_timer) > get_autobind_time() * 1000UL*1000UL &&
            (search_count & 1) == 0) {
            // try for an autobind packet every 2nd packet, waiting 3 packet delays
            static uint32_t cc;
            auto_bindOffset += 5;
            if (auto_bindOffset >= 126) {
                auto_bindOffset = -126;
            }
            Debug(4,"ab recv %u boffset=%d", unsigned(cc), int(auto_bindOffset));
            cc++;
            cc2500.WriteRegCheck(CC2500_0C_FSCTRL0, (uint8_t)auto_bindOffset);
            setChannelRX(AUTOBIND_CHANNEL);
            autobind_start_recv_ms = now;
            chVTSet(&timeout_vt, chTimeMS2I(60), trigger_timeout_event, nullptr);
        } else {
            // shift by one channel at a time when searching
            if (autobind_start_recv_ms == 0 || now - autobind_start_recv_ms > 50) {
                autobind_start_recv_ms = 0;
                cc2500.WriteRegCheck(CC2500_0C_FSCTRL0, (uint8_t)bindOffset);
                nextChannel(1);
            }
        }
        break;
    }

    case STATE_FCCTEST: {
        if (get_fcc_test() == 0) {
            protocolState = STATE_DATA;
            Debug(1,"Ending FCCTEST\n");
        }
        // send every 9ms
        chVTSet(&timeout_vt, chTimeMS2I(INTER_PACKET_MS), trigger_timeout_event, nullptr);
        cc2500.SetPower(get_transmit_power());
        if (get_fcc_test() < 4 || last_fcc_chan != get_fcc_test()) {
            set_fcc_channel();
            send_SRT_telemetry();
        }
        if (last_fcc_chan != get_fcc_test() && get_fcc_test() != 0) {
            Debug(1,"Starting FCCTEST %u at power %u\n", unsigned(get_fcc_test()), unsigned(get_transmit_power()));
        }
        last_fcc_chan = get_fcc_test();
        break;
    }

    default:
        break;
    }
}

void AP_Radio_cc2500::irq_handler_thd(void *arg)
{
    (void)arg;
    while (true) {
        eventmask_t evt = chEvtWaitAny(ALL_EVENTS);

        radio_singleton->cc2500.lock_bus();

        switch (evt) {
        case EVT_IRQ:
            if (radio_singleton->protocolState == STATE_FCCTEST) {
                DEV_PRINTF("IRQ FCC\n");
            }
            radio_singleton->irq_handler();
            break;
        case EVT_TIMEOUT:
            if (radio_singleton->cc2500.ReadReg(CC2500_3B_RXBYTES | CC2500_READ_BURST) & 0x80) {
                irq_time_us = AP_HAL::micros();
                radio_singleton->irq_handler();
            } else {
                radio_singleton->irq_timeout();
            }
            break;
        case EVT_BIND:
            // clear the current bind information
            radio_singleton->bindTxId[0] = 1;
            radio_singleton->bindTxId[1] = 1;

            radio_singleton->setup_hopping_table_SRT();

            radio_singleton->protocolState = STATE_SEARCH;
            radio_singleton->packet_timer = AP_HAL::micros();
            radio_singleton->stats.recv_packets = 0;
            radio_singleton->chanskip = 1;
            radio_singleton->nextChannel(1);
            radio_singleton->save_bind_info();
            break;
        default:
            break;
        }

        radio_singleton->cc2500.unlock_bus();
    }
}

void AP_Radio_cc2500::initTuneRx(void)
{
    cc2500.WriteReg(CC2500_19_FOCCFG, 0x14);
    timeTunedMs = AP_HAL::millis();
    bindOffset = -126;
    best_lqi = 255;
    best_bindOffset = bindOffset;
    cc2500.WriteReg(CC2500_0C_FSCTRL0, (uint8_t)bindOffset);
    //cc2500.WriteReg(CC2500_07_PKTCTRL1, 0x0C);
    //cc2500.WriteReg(CC2500_18_MCSM0, 0x8);

    setChannelRX(0);
}

void AP_Radio_cc2500::initialiseData(uint8_t adr)
{
    cc2500.WriteRegCheck(CC2500_0C_FSCTRL0, bindOffset);
    //cc2500.WriteRegCheck(CC2500_18_MCSM0, 0x8);
    //cc2500.WriteRegCheck(CC2500_07_PKTCTRL1, 0x0D); // address check, no broadcast, autoflush, status enable
    cc2500.WriteRegCheck(CC2500_19_FOCCFG, 0x16);
    hal.scheduler->delay_microseconds(10*1000);
}

void AP_Radio_cc2500::initGetBind(void)
{
    setChannelRX(0);
    hal.scheduler->delay_microseconds(20); // waiting flush FIFO

    cc2500.Strobe(CC2500_SRX);
    listLength = 0;
}

/*
  we've wrapped in the search for the best bind offset. Accept the
  best so far if its good enough
 */
bool AP_Radio_cc2500::check_best_LQI(void)
{
    if (best_lqi >= 50) {
        return false;
    }
    bindOffset = best_bindOffset;
    initGetBind();
    initialiseData(1);
    protocolState = STATE_BIND_BINDING;
    bind_mask = 0;
    listLength = 0;
    Debug(2,"Bind tuning %d with Lqi %u\n", best_bindOffset, best_lqi);
    return true;
}

/*
  check if we have received a packet with sufficiently good link
  quality to start binding
 */
bool AP_Radio_cc2500::tuneRx(uint8_t ccLen, uint8_t *packet)
{
    if (bindOffset >= 126) {
        // we've scanned the whole range, if any were below 50 then
        // accept it
        if (check_best_LQI()) {
            return true;
        }
        bindOffset = -126;
    }
    if ((packet[ccLen - 1] & 0x80) && packet[2] == 0x01) {
        uint8_t Lqi = packet[ccLen - 1] & 0x7F;
        if (Lqi < best_lqi) {
            best_lqi = Lqi;
            best_bindOffset = bindOffset;
        }
    }
    return false;
}

/*
  get a block of hopping data from a bind packet
 */
bool AP_Radio_cc2500::getBindData(uint8_t ccLen, uint8_t *packet)
{
    // parse a bind data packet */
    if ((packet[ccLen - 1] & 0x80) && packet[2] == 0x01) {
        if (bind_mask == 0) {
            bindTxId[0] = packet[3];
            bindTxId[1] = packet[4];
        } else if (bindTxId[0] != packet[3] ||
                   bindTxId[1] != packet[4]) {
            Debug(2,"Bind restart\n");
            bind_mask = 0;
            listLength = 0;
        }

        for (uint8_t n = 0; n < 5; n++) {
            uint8_t c = packet[5] + n;
            if (c < sizeof(bindHopData)) {
                bindHopData[c] = packet[6 + n];
                bind_mask |= (uint64_t(1)<<c);
                listLength = MAX(listLength, c+1);
            }
        }
        // bind has finished when we have hopping data for all channels
        return (listLength == NUM_CHANNELS && bind_mask == ((uint64_t(1)<<NUM_CHANNELS)-1));
    }
    return false;
}

void AP_Radio_cc2500::setChannel(uint8_t channel)
{
    cc2500.Strobe(CC2500_SIDLE);
    cc2500.WriteReg(CC2500_0A_CHANNR, channel);
    // manually recalibrate the PLL for the new channel. This
    // allows for temperature change and voltage fluctuation on
    // the flight board
    cc2500.Strobe(CC2500_SCAL);
    hal.scheduler->delay_microseconds(730);
}

void AP_Radio_cc2500::setChannelRX(uint8_t channel)
{
    setChannel(channel);
    cc2500.Strobe(CC2500_SFRX);
    cc2500.Strobe(CC2500_SRX);
}

void AP_Radio_cc2500::nextChannel(uint8_t skip)
{
    channr = (channr + skip) % listLength;
    setChannelRX(bindHopData[channr]);
}

void AP_Radio_cc2500::parse_frSkyX(const uint8_t *packet)
{
    uint16_t c[8];

    c[0] = (uint16_t)((packet[10] <<8)& 0xF00) | packet[9];
    c[1] = (uint16_t)((packet[11]<<4)&0xFF0) | (packet[10]>>4);
    c[2] = (uint16_t)((packet[13] <<8)& 0xF00) | packet[12];
    c[3] = (uint16_t)((packet[14]<<4)&0xFF0) | (packet[13]>>4);
    c[4] = (uint16_t)((packet[16] <<8)& 0xF00) | packet[15];
    c[5] = (uint16_t)((packet[17]<<4)&0xFF0) | (packet[16]>>4);
    c[6] = (uint16_t)((packet[19] <<8)& 0xF00) | packet[18];
    c[7] = (uint16_t)((packet[20]<<4)&0xFF0) | (packet[19]>>4);

    uint8_t j;
    for (uint8_t i=0; i<8; i++) {
        if (c[i] > 2047)  {
            j = 8;
            c[i] = c[i] - 2048;
        } else {
            j = 0;
        }
        if (c[i] == 0) {
            continue;
        }
        uint16_t word_temp = (((c[i]-64)<<1)/3+860);
        if ((word_temp > 800) && (word_temp < 2200)) {
            uint8_t chan = i+j;
            if (chan < CC2500_MAX_PWM_CHANNELS) {
                pwm_channels[chan] = word_temp;
                if (chan >= chan_count) {
                    chan_count = chan+1;
                }
            }
        }
    }
}

uint16_t AP_Radio_cc2500::calc_crc(const uint8_t *data, uint8_t len)
{
    uint16_t crc = 0;
    for (uint8_t i=0; i < len; i++) {
        crc = (crc<<8) ^ (CRCTable[((uint8_t)(crc>>8) ^ *data++) & 0xFF]);
    }
    return crc;
}

bool AP_Radio_cc2500::check_crc(uint8_t ccLen, uint8_t *packet)
{
    if (ccLen == sizeof(srt_packet)+2 ||
        ccLen == sizeof(autobind_packet_cc2500)+2) {
        // using hardware CRC
        return true;
    } else if (ccLen == 32) {
        // D16 packet
        uint16_t lcrc = calc_crc(&packet[3],(ccLen-7));
        return ((lcrc >>8)==packet[ccLen-4] && (lcrc&0x00FF)==packet[ccLen-3]);
    }
    return false;
}

/*
  save bind info
 */
void AP_Radio_cc2500::save_bind_info(void)
{
    // access to storage for bind information
    StorageAccess bind_storage(StorageManager::StorageBindInfo);
    struct bind_info info;

    info.magic = bind_magic;
    info.bindTxId[0] = bindTxId[0];
    info.bindTxId[1] = bindTxId[1];
    info.bindOffset = bindOffset;
    info.wifi_chan = t_status.wifi_chan;
    memcpy(info.bindHopData, bindHopData, sizeof(info.bindHopData));
    bind_storage.write_block(0, &info, sizeof(info));
}

/*
  load bind info
 */
bool AP_Radio_cc2500::load_bind_info(void)
{
    // access to storage for bind information
    StorageAccess bind_storage(StorageManager::StorageBindInfo);
    struct bind_info info;

    if (!bind_storage.read_block(&info, 0, sizeof(info)) || info.magic != bind_magic) {
        return false;
    }

    bindTxId[0] = info.bindTxId[0];
    bindTxId[1] = info.bindTxId[1];
    bindOffset = info.bindOffset;
    listLength = NUM_CHANNELS;
    t_status.wifi_chan = info.wifi_chan;
    memcpy(bindHopData, info.bindHopData, sizeof(bindHopData));

    setup_hopping_table_SRT();

    return true;
}

/*
  send a D16 telemetry packet
 */
void AP_Radio_cc2500::send_D16_telemetry(void)
{
    uint8_t frame[15];

    memset(frame, 0, sizeof(frame));

    frame[0] = sizeof(frame)-1;
    frame[1] = bindTxId[0];
    frame[2] = bindTxId[1];
    frame[3] = packet3;
    if (telem_send_rssi) {
        frame[4] = MAX(MIN(t_status.rssi, 0x7f),1) | 0x80;
    } else {
        frame[4] = uint8_t(hal.analogin->board_voltage() * 10) & 0x7F;
    }
    telem_send_rssi = !telem_send_rssi;

    uint16_t lcrc = calc_crc(&frame[3], 10);
    frame[13] = lcrc>>8;
    frame[14] = lcrc;

    cc2500.Strobe(CC2500_SIDLE);
    cc2500.Strobe(CC2500_SFTX);
    if (get_fcc_test() <= 3) {
        // in CW FCC test modes we don't write to the FIFO, which
        // gives continuous transmission
        cc2500.WriteFifo(frame, sizeof(frame));
    }
    cc2500.Strobe(CC2500_STX);
}


/*
  send a SRT telemetry packet
 */
void AP_Radio_cc2500::send_SRT_telemetry(void)
{
    struct telem_packet_cc2500 pkt {};

    pkt.length = sizeof(pkt)-1;

    t_status.flags = 0;
    t_status.flags |= AP_Notify::flags.gps_status >= 3?TELEM_FLAG_GPS_OK:0;
    t_status.flags |= AP_Notify::flags.pre_arm_check?TELEM_FLAG_ARM_OK:0;
    t_status.flags |= AP_Notify::flags.failsafe_battery?0:TELEM_FLAG_BATT_OK;
    t_status.flags |= hal.util->get_soft_armed()?TELEM_FLAG_ARMED:0;
    t_status.flags |= AP_Notify::flags.have_pos_abs?TELEM_FLAG_POS_OK:0;
    t_status.flags |= AP_Notify::flags.video_recording?TELEM_FLAG_VIDEO:0;
    t_status.flight_mode = AP_Notify::flags.flight_mode;
    t_status.tx_max = get_tx_max_power();
    t_status.note_adjust = get_tx_buzzer_adjust();

    // send fw update packet for 7/8 of packets if any data pending
    if (fwupload.length != 0 &&
        fwupload.length > fwupload.acked &&
        ((fwupload.counter++ & 0x07) != 0) &&
        sem.take_nonblocking()) {
        pkt.type = fwupload.fw_type;
        pkt.payload.fw.seq = fwupload.sequence;
        uint32_t len = fwupload.length>fwupload.acked?fwupload.length - fwupload.acked:0;
        const uint8_t maxlen = sizeof(pkt.payload.fw.data);
        pkt.payload.fw.len = len<=maxlen?len:maxlen;
        pkt.payload.fw.offset = fwupload.offset+fwupload.acked;
        memcpy(&pkt.payload.fw.data[0], &fwupload.pending_data[fwupload.acked], pkt.payload.fw.len);
        fwupload.len = pkt.payload.fw.len;
        Debug(4, "sent fw seq=%u offset=%u len=%u type=%u\n",
              pkt.payload.fw.seq,
              pkt.payload.fw.offset,
              pkt.payload.fw.len,
              pkt.type);
        sem.give();
    } else {
        pkt.type = TELEM_STATUS;
        pkt.payload.status = t_status;
    }
    pkt.txid[0] = bindTxId[0];
    pkt.txid[1] = bindTxId[1];

    cc2500.Strobe(CC2500_SIDLE);
    cc2500.Strobe(CC2500_SFTX);
    if (get_fcc_test() <= 3) {
        // in CW FCC test modes we don't write to the FIFO, which gives
        // continuous transmission
        cc2500.WriteFifo((const uint8_t *)&pkt, sizeof(pkt));
    }
    cc2500.Strobe(CC2500_STX);

    if (last_wifi_channel != t_status.wifi_chan) {
        setup_hopping_table_SRT();
        save_bind_info();
    }

    telem_send_count++;
}

/*
  send a fwupload ack if needed
 */
void AP_Radio_cc2500::check_fw_ack(void)
{
    if (fwupload.need_ack && sem.take_nonblocking()) {
        // ack the send of a DATA96 fw packet to TX
        fwupload.need_ack = false;
        uint8_t data16[16] {};
        uint32_t ack_to = fwupload.offset + fwupload.acked;
        memcpy(&data16[0], &ack_to, 4);
        mavlink_msg_data16_send(fwupload.chan, 42, 4, data16);
        Debug(4,"sent ack DATA16\n");
        sem.give();
    }
}

/*
  support all 4 rc input modes by swapping channels.
 */
void AP_Radio_cc2500::map_stick_mode(uint16_t *channels)
{
    switch (get_stick_mode()) {
    case 1: {
        // mode1
        uint16_t tmp = channels[1];
        channels[1] = 3000 - channels[2];
        channels[2] = 3000 - tmp;
        break;
    }

    case 3: {
        // mode3
        uint16_t tmp = channels[1];
        channels[1] = 3000 - channels[2];
        channels[2] = 3000 - tmp;
        tmp = channels[0];
        channels[0] = channels[3];
        channels[3] = tmp;
        break;
    }

    case 4: {
        // mode4
        uint16_t tmp = channels[0];
        channels[0] = channels[3];
        channels[3] = tmp;
        break;
    }

    case 2:
    default:
        // nothing to do, transmitter is natively mode2
        break;
    }
}

/*
  check if we are the 2nd RX bound to this TX
 */
void AP_Radio_cc2500::check_double_bind(void)
{
    if (tx_pps <= telem_send_count ||
        get_autobind_time() == 0) {
        return;
    }
    // the TX has received more telemetry packets in the last second
    // than we have ever sent. There must be another RX sending
    // telemetry packets. We will reset our mfg_id and go back waiting
    // for a new bind packet, hopefully with the right TX
    Debug(1,"Double-bind detected\n");

    // clear the current bind information
    radio_singleton->bindTxId[0] = 1;
    radio_singleton->bindTxId[1] = 1;

    radio_singleton->setup_hopping_table_SRT();

    radio_singleton->protocolState = STATE_SEARCH;
    radio_singleton->packet_timer = AP_HAL::micros();
    radio_singleton->stats.recv_packets = 0;
    radio_singleton->chanskip = 1;
    radio_singleton->nextChannel(1);
}

#endif  // AP_RADIO_CC2500_ENABLED