/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-

#pragma once

#include <DataFlash/DataFlash.h>
#include <GCS_MAVLink/GCS_MAVLink.h>

namespace SITL {

struct PACKED sitl_fdm {
    // this is the packet sent by the simulator
    // to the APM executable to update the simulator state
    // All values are little-endian
    uint64_t timestamp_us;
    double latitude, longitude; // degrees
    double altitude;  // MSL
    double heading;   // degrees
    double speedN, speedE, speedD; // m/s
    double xAccel, yAccel, zAccel;       // m/s/s in body frame
    double rollRate, pitchRate, yawRate; // degrees/s/s in body frame
    double rollDeg, pitchDeg, yawDeg;    // euler angles, degrees
    double airspeed; // m/s
    uint32_t magic; // 0x4c56414f
};

// number of rc output channels
#define SITL_NUM_CHANNELS 14


class SITL {
public:

    SITL() {
        // set a default compass offset
        mag_ofs.set(Vector3f(5, 13, -18));
        AP_Param::setup_object_defaults(this, var_info);
    }

    enum GPSType {
        GPS_TYPE_NONE  = 0,
        GPS_TYPE_UBLOX = 1,
        GPS_TYPE_MTK   = 2,
        GPS_TYPE_MTK16 = 3,
        GPS_TYPE_MTK19 = 4,
        GPS_TYPE_NMEA  = 5,
        GPS_TYPE_SBP   = 6,
        GPS_TYPE_FILE  = 7
    };

    struct sitl_fdm state;

    static const struct AP_Param::GroupInfo var_info[];

    // noise levels for simulated sensors
    AP_Float baro_noise;  // in metres
    AP_Float baro_drift;  // in metres per second
    AP_Float baro_glitch; // glitch in meters
    AP_Float gyro_noise;  // in degrees/second
    AP_Float accel_noise; // in m/s/s
    AP_Float accel2_noise; // in m/s/s
    AP_Vector3f accel_bias; // in m/s/s
    AP_Float aspd_noise;  // in m/s
    AP_Float aspd_fail;   // pitot tube failure

    AP_Float mag_noise;   // in mag units (earth field is 818)
    AP_Float mag_error;   // in degrees
    AP_Vector3f mag_mot;  // in mag units per amp
    AP_Vector3f mag_ofs;  // in mag units
    AP_Float servo_rate;  // servo speed in degrees/second

    AP_Float sonar_glitch;// probablility between 0-1 that any given sonar sample will read as max distance
    AP_Float sonar_noise; // in metres
    AP_Float sonar_scale; // meters per volt

    AP_Float drift_speed; // degrees/second/minute
    AP_Float drift_time;  // period in minutes
    AP_Float engine_mul;  // engine multiplier
    AP_Int8  gps_disable; // disable simulated GPS
    AP_Int8  gps2_enable; // enable 2nd simulated GPS
    AP_Int8  gps_delay;   // delay in samples
    AP_Int8  gps_type;    // see enum GPSType
    AP_Float gps_byteloss;// byte loss as a percent
    AP_Int8  gps_numsats; // number of visible satellites
    AP_Vector3f  gps_glitch;  // glitch offsets in lat, lon and altitude
    AP_Int8  gps_hertz;   // GPS update rate in Hz
    AP_Float batt_voltage; // battery voltage base
    AP_Float accel_fail;  // accelerometer failure value
    AP_Int8  rc_fail;     // fail RC input
    AP_Int8  baro_disable; // disable simulated barometer
    AP_Int8  float_exception; // enable floating point exception checks
    AP_Int8  flow_enable; // enable simulated optflow
    AP_Int16 flow_rate; // optflow data rate (Hz)
    AP_Int8  flow_delay; // optflow data delay
    AP_Int8  terrain_enable; // enable using terrain for height

    // wind control
    AP_Float wind_speed;
    AP_Float wind_direction;
    AP_Float wind_turbulance;
    AP_Float gps_drift_alt;

    AP_Int16  baro_delay; // barometer data delay in ms
    AP_Int16  mag_delay; // magnetometer data delay in ms
    AP_Int16  wind_delay; // windspeed data delay in ms

    void simstate_send(mavlink_channel_t chan);

    void Log_Write_SIMSTATE(DataFlash_Class &dataflash);

    // convert a set of roll rates from earth frame to body frame
    static void convert_body_frame(double rollDeg, double pitchDeg,
                                   double rollRate, double pitchRate, double yawRate,
                                   double *p, double *q, double *r);

    // convert a set of roll rates from body frame to earth frame
    static Vector3f convert_earth_frame(const Matrix3f &dcm, const Vector3f &gyro);
};

} // namespace SITL