#include "Copter.h" /* * This event will be called when the failsafe changes * boolean failsafe reflects the current state */ bool Copter::failsafe_option(FailsafeOption opt) const { return (g2.fs_options & (uint32_t)opt); } void Copter::failsafe_radio_on_event() { AP::logger().Write_Error(LogErrorSubsystem::FAILSAFE_RADIO, LogErrorCode::FAILSAFE_OCCURRED); // set desired action based on FS_THR_ENABLE parameter Failsafe_Action desired_action; switch (g.failsafe_throttle) { case FS_THR_DISABLED: desired_action = Failsafe_Action_None; break; case FS_THR_ENABLED_ALWAYS_RTL: case FS_THR_ENABLED_CONTINUE_MISSION: desired_action = Failsafe_Action_RTL; break; case FS_THR_ENABLED_ALWAYS_SMARTRTL_OR_RTL: desired_action = Failsafe_Action_SmartRTL; break; case FS_THR_ENABLED_ALWAYS_SMARTRTL_OR_LAND: desired_action = Failsafe_Action_SmartRTL_Land; break; case FS_THR_ENABLED_ALWAYS_LAND: desired_action = Failsafe_Action_Land; break; default: desired_action = Failsafe_Action_Land; } // Conditions to deviate from FS_THR_ENABLE selection and send specific GCS warning if (should_disarm_on_failsafe()) { // should immediately disarm when we're on the ground gcs().send_text(MAV_SEVERITY_WARNING, "Radio Failsafe - Disarming"); arming.disarm(AP_Arming::Method::RADIOFAILSAFE); desired_action = Failsafe_Action_None; } else if (flightmode->is_landing() && ((battery.has_failsafed() && battery.get_highest_failsafe_priority() <= FAILSAFE_LAND_PRIORITY))) { // Allow landing to continue when battery failsafe requires it (not a user option) gcs().send_text(MAV_SEVERITY_WARNING, "Radio + Battery Failsafe - Continuing Landing"); desired_action = Failsafe_Action_Land; } else if (flightmode->is_landing() && failsafe_option(FailsafeOption::CONTINUE_IF_LANDING)) { // Allow landing to continue when FS_OPTIONS is set to continue landing gcs().send_text(MAV_SEVERITY_WARNING, "Radio Failsafe - Continuing Landing"); desired_action = Failsafe_Action_Land; } else if (control_mode == Mode::Number::AUTO && failsafe_option(FailsafeOption::RC_CONTINUE_IF_AUTO)) { // Allow mission to continue when FS_OPTIONS is set to continue mission gcs().send_text(MAV_SEVERITY_WARNING, "Radio Failsafe - Continuing Auto Mode"); desired_action = Failsafe_Action_None; } else if ((flightmode->in_guided_mode()) && (failsafe_option(FailsafeOption::RC_CONTINUE_IF_GUIDED)) && (g.failsafe_gcs != FS_GCS_DISABLED)) { // Allow guided mode to continue when FS_OPTIONS is set to continue in guided mode. Only if the GCS failsafe is enabled. gcs().send_text(MAV_SEVERITY_WARNING, "Radio Failsafe - Continuing Guided Mode"); desired_action = Failsafe_Action_None; } else { gcs().send_text(MAV_SEVERITY_WARNING, "Radio Failsafe"); } // Call the failsafe action handler do_failsafe_action(desired_action, ModeReason::RADIO_FAILSAFE); } // failsafe_off_event - respond to radio contact being regained void Copter::failsafe_radio_off_event() { // no need to do anything except log the error as resolved // user can now override roll, pitch, yaw and throttle and even use flight mode switch to restore previous flight mode AP::logger().Write_Error(LogErrorSubsystem::FAILSAFE_RADIO, LogErrorCode::FAILSAFE_RESOLVED); gcs().send_text(MAV_SEVERITY_WARNING, "Radio Failsafe Cleared"); } void Copter::handle_battery_failsafe(const char *type_str, const int8_t action) { AP::logger().Write_Error(LogErrorSubsystem::FAILSAFE_BATT, LogErrorCode::FAILSAFE_OCCURRED); Failsafe_Action desired_action = (Failsafe_Action)action; // Conditions to deviate from BATT_FS_XXX_ACT parameter setting if (should_disarm_on_failsafe()) { // should immediately disarm when we're on the ground arming.disarm(AP_Arming::Method::BATTERYFAILSAFE); desired_action = Failsafe_Action_None; gcs().send_text(MAV_SEVERITY_WARNING, "Battery Failsafe - Disarming"); } else if (flightmode->is_landing() && failsafe_option(FailsafeOption::CONTINUE_IF_LANDING) && desired_action != Failsafe_Action_None) { // Allow landing to continue when FS_OPTIONS is set to continue when landing desired_action = Failsafe_Action_Land; gcs().send_text(MAV_SEVERITY_WARNING, "Battery Failsafe - Continuing Landing"); } else { gcs().send_text(MAV_SEVERITY_WARNING, "Battery Failsafe"); } // Battery FS options already use the Failsafe_Options enum. So use them directly. do_failsafe_action(desired_action, ModeReason::BATTERY_FAILSAFE); } // failsafe_gcs_check - check for ground station failsafe void Copter::failsafe_gcs_check() { // Bypass GCS failsafe checks if disabled or GCS never connected if (g.failsafe_gcs == FS_GCS_DISABLED || failsafe.last_heartbeat_ms == 0) { return; } // calc time since last gcs update // note: this only looks at the heartbeat from the device id set by g.sysid_my_gcs const uint32_t last_gcs_update_ms = millis() - failsafe.last_heartbeat_ms; // Determine which event to trigger if (last_gcs_update_ms < FS_GCS_TIMEOUT_MS && failsafe.gcs) { // Recovery from a GCS failsafe set_failsafe_gcs(false); failsafe_gcs_off_event(); } else if (last_gcs_update_ms < FS_GCS_TIMEOUT_MS && !failsafe.gcs) { // No problem, do nothing } else if (last_gcs_update_ms > FS_GCS_TIMEOUT_MS && failsafe.gcs) { // Already in failsafe, do nothing } else if (last_gcs_update_ms > FS_GCS_TIMEOUT_MS && !failsafe.gcs) { // New GCS failsafe event, trigger events set_failsafe_gcs(true); failsafe_gcs_on_event(); } } // failsafe_gcs_on_event - actions to take when GCS contact is lost void Copter::failsafe_gcs_on_event(void) { AP::logger().Write_Error(LogErrorSubsystem::FAILSAFE_GCS, LogErrorCode::FAILSAFE_OCCURRED); RC_Channels::clear_overrides(); // convert the desired failsafe response to the Failsafe_Action enum Failsafe_Action desired_action; switch (g.failsafe_gcs) { case FS_GCS_DISABLED: desired_action = Failsafe_Action_None; break; case FS_GCS_ENABLED_ALWAYS_RTL: case FS_GCS_ENABLED_CONTINUE_MISSION: desired_action = Failsafe_Action_RTL; break; case FS_GCS_ENABLED_ALWAYS_SMARTRTL_OR_RTL: desired_action = Failsafe_Action_SmartRTL; break; case FS_GCS_ENABLED_ALWAYS_SMARTRTL_OR_LAND: desired_action = Failsafe_Action_SmartRTL_Land; break; case FS_GCS_ENABLED_ALWAYS_LAND: desired_action = Failsafe_Action_Land; break; default: // if an invalid parameter value is set, the fallback is RTL desired_action = Failsafe_Action_RTL; } // Conditions to deviate from FS_GCS_ENABLE parameter setting if (!motors->armed()) { desired_action = Failsafe_Action_None; gcs().send_text(MAV_SEVERITY_WARNING, "GCS Failsafe"); } else if (should_disarm_on_failsafe()) { // should immediately disarm when we're on the ground arming.disarm(AP_Arming::Method::GCSFAILSAFE); desired_action = Failsafe_Action_None; gcs().send_text(MAV_SEVERITY_WARNING, "GCS Failsafe - Disarming"); } else if (flightmode->is_landing() && ((battery.has_failsafed() && battery.get_highest_failsafe_priority() <= FAILSAFE_LAND_PRIORITY))) { // Allow landing to continue when battery failsafe requires it (not a user option) gcs().send_text(MAV_SEVERITY_WARNING, "GCS + Battery Failsafe - Continuing Landing"); desired_action = Failsafe_Action_Land; } else if (flightmode->is_landing() && failsafe_option(FailsafeOption::CONTINUE_IF_LANDING)) { // Allow landing to continue when FS_OPTIONS is set to continue landing gcs().send_text(MAV_SEVERITY_WARNING, "GCS Failsafe - Continuing Landing"); desired_action = Failsafe_Action_Land; } else if (control_mode == Mode::Number::AUTO && failsafe_option(FailsafeOption::GCS_CONTINUE_IF_AUTO)) { // Allow mission to continue when FS_OPTIONS is set to continue mission gcs().send_text(MAV_SEVERITY_WARNING, "GCS Failsafe - Continuing Auto Mode"); desired_action = Failsafe_Action_None; } else if (failsafe_option(FailsafeOption::GCS_CONTINUE_IF_PILOT_CONTROL) && !flightmode->is_autopilot()) { // should continue when in a pilot controlled mode because FS_OPTIONS is set to continue in pilot controlled modes gcs().send_text(MAV_SEVERITY_WARNING, "GCS Failsafe - Continuing Pilot Control"); desired_action = Failsafe_Action_None; } else { gcs().send_text(MAV_SEVERITY_WARNING, "GCS Failsafe"); } // Call the failsafe action handler do_failsafe_action(desired_action, ModeReason::GCS_FAILSAFE); } // failsafe_gcs_off_event - actions to take when GCS contact is restored void Copter::failsafe_gcs_off_event(void) { gcs().send_text(MAV_SEVERITY_WARNING, "GCS Failsafe Cleared"); AP::logger().Write_Error(LogErrorSubsystem::FAILSAFE_GCS, LogErrorCode::FAILSAFE_RESOLVED); } // executes terrain failsafe if data is missing for longer than a few seconds void Copter::failsafe_terrain_check() { // trigger within milliseconds of failures while in various modes bool timeout = (failsafe.terrain_last_failure_ms - failsafe.terrain_first_failure_ms) > FS_TERRAIN_TIMEOUT_MS; bool trigger_event = timeout && flightmode->requires_terrain_failsafe(); // check for clearing of event if (trigger_event != failsafe.terrain) { if (trigger_event) { failsafe_terrain_on_event(); } else { AP::logger().Write_Error(LogErrorSubsystem::FAILSAFE_TERRAIN, LogErrorCode::ERROR_RESOLVED); failsafe.terrain = false; } } } // set terrain data status (found or not found) void Copter::failsafe_terrain_set_status(bool data_ok) { uint32_t now = millis(); // record time of first and latest failures (i.e. duration of failures) if (!data_ok) { failsafe.terrain_last_failure_ms = now; if (failsafe.terrain_first_failure_ms == 0) { failsafe.terrain_first_failure_ms = now; } } else { // failures cleared after 0.1 seconds of persistent successes if (now - failsafe.terrain_last_failure_ms > 100) { failsafe.terrain_last_failure_ms = 0; failsafe.terrain_first_failure_ms = 0; } } } // terrain failsafe action void Copter::failsafe_terrain_on_event() { failsafe.terrain = true; gcs().send_text(MAV_SEVERITY_CRITICAL,"Failsafe: Terrain data missing"); AP::logger().Write_Error(LogErrorSubsystem::FAILSAFE_TERRAIN, LogErrorCode::FAILSAFE_OCCURRED); if (should_disarm_on_failsafe()) { arming.disarm(AP_Arming::Method::TERRAINFAILSAFE); #if MODE_RTL_ENABLED == ENABLED } else if (control_mode == Mode::Number::RTL) { mode_rtl.restart_without_terrain(); #endif } else { set_mode_RTL_or_land_with_pause(ModeReason::TERRAIN_FAILSAFE); } } // check for gps glitch failsafe void Copter::gpsglitch_check() { // get filter status nav_filter_status filt_status = inertial_nav.get_filter_status(); bool gps_glitching = filt_status.flags.gps_glitching; // log start or stop of gps glitch. AP_Notify update is handled from within AP_AHRS if (ap.gps_glitching != gps_glitching) { ap.gps_glitching = gps_glitching; if (gps_glitching) { AP::logger().Write_Error(LogErrorSubsystem::GPS, LogErrorCode::GPS_GLITCH); gcs().send_text(MAV_SEVERITY_CRITICAL,"GPS Glitch"); } else { AP::logger().Write_Error(LogErrorSubsystem::GPS, LogErrorCode::ERROR_RESOLVED); gcs().send_text(MAV_SEVERITY_CRITICAL,"GPS Glitch cleared"); } } } // set_mode_RTL_or_land_with_pause - sets mode to RTL if possible or LAND with 4 second delay before descent starts // this is always called from a failsafe so we trigger notification to pilot void Copter::set_mode_RTL_or_land_with_pause(ModeReason reason) { // attempt to switch to RTL, if this fails then switch to Land if (!set_mode(Mode::Number::RTL, reason)) { // set mode to land will trigger mode change notification to pilot set_mode_land_with_pause(reason); } else { // alert pilot to mode change AP_Notify::events.failsafe_mode_change = 1; } } // set_mode_SmartRTL_or_land_with_pause - sets mode to SMART_RTL if possible or LAND with 4 second delay before descent starts // this is always called from a failsafe so we trigger notification to pilot void Copter::set_mode_SmartRTL_or_land_with_pause(ModeReason reason) { // attempt to switch to SMART_RTL, if this failed then switch to Land if (!set_mode(Mode::Number::SMART_RTL, reason)) { gcs().send_text(MAV_SEVERITY_WARNING, "SmartRTL Unavailable, Using Land Mode"); set_mode_land_with_pause(reason); } else { AP_Notify::events.failsafe_mode_change = 1; } } // set_mode_SmartRTL_or_RTL - sets mode to SMART_RTL if possible or RTL if possible or LAND with 4 second delay before descent starts // this is always called from a failsafe so we trigger notification to pilot void Copter::set_mode_SmartRTL_or_RTL(ModeReason reason) { // attempt to switch to SmartRTL, if this failed then attempt to RTL // if that fails, then land if (!set_mode(Mode::Number::SMART_RTL, reason)) { gcs().send_text(MAV_SEVERITY_WARNING, "SmartRTL Unavailable, Trying RTL Mode"); set_mode_RTL_or_land_with_pause(reason); } else { AP_Notify::events.failsafe_mode_change = 1; } } bool Copter::should_disarm_on_failsafe() { if (ap.in_arming_delay) { return true; } switch (control_mode) { case Mode::Number::STABILIZE: case Mode::Number::ACRO: // if throttle is zero OR vehicle is landed disarm motors return ap.throttle_zero || ap.land_complete; case Mode::Number::AUTO: // if mission has not started AND vehicle is landed, disarm motors return !ap.auto_armed && ap.land_complete; default: // used for AltHold, Guided, Loiter, RTL, Circle, Drift, Sport, Flip, Autotune, PosHold // if landed disarm return ap.land_complete; } } void Copter::do_failsafe_action(Failsafe_Action action, ModeReason reason){ // Execute the specified desired_action switch (action) { case Failsafe_Action_None: return; case Failsafe_Action_Land: set_mode_land_with_pause(reason); break; case Failsafe_Action_RTL: set_mode_RTL_or_land_with_pause(reason); break; case Failsafe_Action_SmartRTL: set_mode_SmartRTL_or_RTL(reason); break; case Failsafe_Action_SmartRTL_Land: set_mode_SmartRTL_or_land_with_pause(reason); break; case Failsafe_Action_Terminate: #if ADVANCED_FAILSAFE == ENABLED char battery_type_str[17]; snprintf(battery_type_str, 17, "%s battery", type_str); g2.afs.gcs_terminate(true, battery_type_str); #else arming.disarm(AP_Arming::Method::FAILSAFE_ACTION_TERMINATE); #endif } #if GRIPPER_ENABLED == ENABLED if (failsafe_option(FailsafeOption::RELEASE_GRIPPER)) { copter.g2.gripper.release(); } #endif }