#include "mode.h" #include "Rover.h" bool ModeLoiter::_enter() { // set _destination to reasonable stopping point calc_stopping_location(_destination); // initialise desired speed to current speed if (!attitude_control.get_forward_speed(_desired_speed)) { _desired_speed = 0.0f; } // initialise heading to current heading _desired_yaw_cd = ahrs.yaw_sensor; return true; } void ModeLoiter::update() { // get distance (in meters) to destination _distance_to_destination = rover.current_loc.get_distance(_destination); // if within loiter radius slew desired speed towards zero and use existing desired heading if (_distance_to_destination <= g2.loit_radius) { // sailboats should not stop unless motoring const float desired_speed_within_radius = rover.g2.sailboat.tack_enabled() ? 0.1f : 0.0f; _desired_speed = attitude_control.get_desired_speed_accel_limited(desired_speed_within_radius, rover.G_Dt); } else { // P controller with hard-coded gain to convert distance to desired speed // To-Do: make gain configurable or calculate from attitude controller's maximum accelearation _desired_speed = MIN((_distance_to_destination - g2.loit_radius) * 0.5f, g2.wp_nav.get_default_speed()); // calculate bearing to destination _desired_yaw_cd = rover.current_loc.get_bearing_to(_destination); float yaw_error_cd = wrap_180_cd(_desired_yaw_cd - ahrs.yaw_sensor); // if destination is behind vehicle, reverse towards it if (fabsf(yaw_error_cd) > 9000 && g2.loit_type == 0) { _desired_yaw_cd = wrap_180_cd(_desired_yaw_cd + 18000); yaw_error_cd = wrap_180_cd(_desired_yaw_cd - ahrs.yaw_sensor); _desired_speed = -_desired_speed; } // reduce desired speed if yaw_error is large // 45deg of error reduces speed to 75%, 90deg of error reduces speed to 50% float yaw_error_ratio = 1.0f - constrain_float(fabsf(yaw_error_cd / 9000.0f), 0.0f, 1.0f) * 0.5f; _desired_speed *= yaw_error_ratio; } // run steering and throttle controllers calc_steering_to_heading(_desired_yaw_cd); calc_throttle(_desired_speed, true); } // get desired location bool ModeLoiter::get_desired_location(Location& destination) const { destination = _destination; return true; }