/// @file	AP_Camera.h
/// @brief	Photo or video camera manager, with EEPROM-backed storage of constants.
#pragma once

#include <AP_Param/AP_Param.h>
#include <AP_Common/AP_Common.h>
#include <GCS_MAVLink/GCS_MAVLink.h>
#include <GCS_MAVLink/GCS.h>
#include <AP_Relay/AP_Relay.h>
#include <AP_GPS/AP_GPS.h>
#include <AP_AHRS/AP_AHRS.h>
#include <AP_Mission/AP_Mission.h>
#if CONFIG_HAL_BOARD == HAL_BOARD_PX4
#include <drivers/drv_hrt.h>
#endif

#define AP_CAMERA_TRIGGER_TYPE_SERVO                0
#define AP_CAMERA_TRIGGER_TYPE_RELAY                1

#define AP_CAMERA_TRIGGER_DEFAULT_TRIGGER_TYPE  AP_CAMERA_TRIGGER_TYPE_SERVO    // default is to use servo to trigger camera

#define AP_CAMERA_TRIGGER_DEFAULT_DURATION  10      // default duration servo or relay is held open in 10ths of a second (i.e. 10 = 1 second)

#define AP_CAMERA_SERVO_ON_PWM              1300    // default PWM value to move servo to when shutter is activated
#define AP_CAMERA_SERVO_OFF_PWM             1100    // default PWM value to move servo to when shutter is deactivated

#define AP_CAMERA_FEEDBACK_DEFAULT_FEEDBACK_PIN -1  // default is to not use camera feedback pin

/// @class	Camera
/// @brief	Object managing a Photo or video camera
class AP_Camera {

public:
    AP_Camera(AP_Relay *obj_relay, uint32_t _log_camera_bit, const struct Location &_loc, const AP_AHRS &_ahrs)
        : log_camera_bit(_log_camera_bit)
        , current_loc(_loc)
        , ahrs(_ahrs)
    {
        AP_Param::setup_object_defaults(this, var_info);
        _apm_relay = obj_relay;
    }

    /* Do not allow copies */
    AP_Camera(const AP_Camera &other) = delete;
    AP_Camera &operator=(const AP_Camera&) = delete;


    // MAVLink methods
    void            control_msg(const mavlink_message_t* msg);
    void            send_feedback(mavlink_channel_t chan);

    // Command processing
    void            configure(float shooting_mode, float shutter_speed, float aperture, float ISO, float exposure_type, float cmd_id, float engine_cutoff_time);
    // handle camera control
    void            control(float session, float zoom_pos, float zoom_step, float focus_lock, float shooting_cmd, float cmd_id);

    // set camera trigger distance in a mission
    void            set_trigger_distance(uint32_t distance_m) { _trigg_dist.set(distance_m); }

    void take_picture();

    // Update - to be called periodically @at least 10Hz
    void update();

    // update camera trigger - 50Hz
    void update_trigger();

    static const struct AP_Param::GroupInfo        var_info[];

    // set if vehicle is in AUTO mode
    void set_is_auto_mode(bool enable) { _is_in_auto_mode = enable; }

private:
    AP_Int8         _trigger_type;      // 0:Servo,1:Relay
    AP_Int8         _trigger_duration;  // duration in 10ths of a second that the camera shutter is held open
    AP_Int8         _relay_on;          // relay value to trigger camera
    AP_Int16        _servo_on_pwm;      // PWM value to move servo to when shutter is activated
    AP_Int16        _servo_off_pwm;     // PWM value to move servo to when shutter is deactivated
    uint8_t         _trigger_counter;   // count of number of cycles shutter has been held open
    AP_Relay       *_apm_relay;         // pointer to relay object from the base class Relay.
    AP_Int8         _auto_mode_only;    // if 1: trigger by distance only if in AUTO mode.
    bool            _is_in_auto_mode;   // true if in AUTO mode

    void            servo_pic();        // Servo operated camera
    void            relay_pic();        // basic relay activation
    void            feedback_pin_timer();
    void            setup_feedback_callback(void);
#if CONFIG_HAL_BOARD == HAL_BOARD_PX4
    static void     capture_callback(void *context, uint32_t chan_index,
                                     hrt_abstime edge_time, uint32_t edge_state, uint32_t overflow);
#endif
    
    AP_Float        _trigg_dist;        // distance between trigger points (meters)
    AP_Int16        _min_interval;      // Minimum time between shots required by camera
    AP_Int16        _max_roll;          // Maximum acceptable roll angle when trigging camera
    uint32_t        _last_photo_time;   // last time a photo was taken
    struct Location _last_location;
    uint16_t        _image_index;       // number of pictures taken since boot
    uint16_t        _feedback_events;   // number of feedback events since boot

    // pin number for accurate camera feedback messages
    AP_Int8         _feedback_pin;
    AP_Int8         _feedback_polarity;

    // this is set to 1 when camera trigger pin has fired
    static volatile bool   _camera_triggered;
    bool            _timer_installed:1;
    uint8_t         _last_pin_state;

    void log_picture();

    uint32_t log_camera_bit;
    const struct Location &current_loc;
    const AP_AHRS &ahrs;

    // entry point to trip local shutter (e.g. by relay or servo)
    void trigger_pic();

    // de-activate the trigger after some delay, but without using a delay() function
    // should be called at 50hz from main program
    void trigger_pic_cleanup();

    // check if feedback pin has fired
    bool check_feedback_pin(void);

    // return true if we are using a feedback pin
    bool using_feedback_pin(void) const { return _feedback_pin > 0; }

};