#include #include "AP_NavEKF3.h" #include "AP_NavEKF3_core.h" #include #include // Check basic filter health metrics and return a consolidated health status bool NavEKF3_core::healthy(void) const { uint16_t faultInt; getFilterFaults(faultInt); if (faultInt > 0) { return false; } if (velTestRatio > 1 && posTestRatio > 1 && hgtTestRatio > 1) { // all three metrics being above 1 means the filter is // extremely unhealthy. return false; } // Give the filter a second to settle before use if ((imuSampleTime_ms - ekfStartTime_ms) < 1000 ) { return false; } // position and height innovations must be within limits when on-ground and in a static mode of operation float horizErrSq = sq(innovVelPos[3]) + sq(innovVelPos[4]); if (onGround && (PV_AidingMode == AID_NONE) && ((horizErrSq > 1.0f) || (fabsF(hgtInnovFiltState) > 1.0f))) { return false; } // all OK return true; } // Return a consolidated error score where higher numbers represent larger errors // Intended to be used by the front-end to determine which is the primary EKF float NavEKF3_core::errorScore() const { float score = 0.0f; if (tiltAlignComplete && yawAlignComplete) { // Check GPS fusion performance score = MAX(score, 0.5f * (velTestRatio + posTestRatio)); // Check altimeter fusion performance score = MAX(score, hgtTestRatio); // Check airspeed fusion performance - only when we are using at least 2 airspeed sensors so we can switch lanes with // a better one. This only comes into effect for a forward flight vehicle. A sensitivity factor of 0.3 is added to keep the // EKF less sensitive to innovations arising due events like strong gusts of wind, thus, prevent reporting high error scores if (assume_zero_sideslip()) { const auto *arsp = dal.airspeed(); if (arsp != nullptr && arsp->get_num_sensors() >= 2 && (frontend->_affinity & EKF_AFFINITY_ARSP)) { score = MAX(score, 0.3f * tasTestRatio); } } // Check magnetometer fusion performance - need this when magnetometer affinity is enabled to override the inherent compass // switching mechanism, and instead be able to move to a better lane if (frontend->_affinity & EKF_AFFINITY_MAG) { score = MAX(score, 0.3f * (magTestRatio.x + magTestRatio.y + magTestRatio.z)); } } return score; } // provides the height limit to be observed by the control loops // returns false if no height limiting is required // this is needed to ensure the vehicle does not fly too high when using optical flow navigation bool NavEKF3_core::getHeightControlLimit(float &height) const { // only ask for limiting if we are doing optical flow navigation if (frontend->sources.useVelXYSource(AP_NavEKF_Source::SourceXY::OPTFLOW) && (PV_AidingMode == AID_RELATIVE) && flowDataValid) { // If are doing optical flow nav, ensure the height above ground is within range finder limits after accounting for vehicle tilt and control errors #if AP_RANGEFINDER_ENABLED const auto *_rng = dal.rangefinder(); if (_rng == nullptr) { // we really, really shouldn't be here. return false; } height = MAX(float(_rng->max_distance_cm_orient(ROTATION_PITCH_270)) * 0.007f - 1.0f, 1.0f); #else return false; #endif // If we are are not using the range finder as the height reference, then compensate for the difference between terrain and EKF origin if (frontend->sources.getPosZSource() != AP_NavEKF_Source::SourceZ::RANGEFINDER) { height -= terrainState; } return true; } else { return false; } } // return the Euler roll, pitch and yaw angle in radians void NavEKF3_core::getEulerAngles(Vector3f &euler) const { outputDataNew.quat.to_euler(euler); euler = euler - dal.get_trim(); } // return body axis gyro bias estimates in rad/sec void NavEKF3_core::getGyroBias(Vector3f &gyroBias) const { if (dtEkfAvg < 1e-6f) { gyroBias.zero(); return; } gyroBias = (stateStruct.gyro_bias / dtEkfAvg).tofloat(); } // return accelerometer bias in m/s/s void NavEKF3_core::getAccelBias(Vector3f &accelBias) const { if (!statesInitialised) { accelBias.zero(); return; } accelBias = (stateStruct.accel_bias / dtEkfAvg).tofloat(); } // return the transformation matrix from XYZ (body) to NED axes void NavEKF3_core::getRotationBodyToNED(Matrix3f &mat) const { outputDataNew.quat.rotation_matrix(mat); mat = mat * dal.get_rotation_vehicle_body_to_autopilot_body(); } // return the quaternions defining the rotation from NED to XYZ (body) axes void NavEKF3_core::getQuaternion(Quaternion& ret) const { ret = outputDataNew.quat.tofloat(); } // return the amount of yaw angle change due to the last yaw angle reset in radians // returns the time of the last yaw angle reset or 0 if no reset has ever occurred uint32_t NavEKF3_core::getLastYawResetAngle(float &yawAng) const { yawAng = yawResetAngle; return lastYawReset_ms; } // return the amount of NE position change due to the last position reset in metres // returns the time of the last reset or 0 if no reset has ever occurred uint32_t NavEKF3_core::getLastPosNorthEastReset(Vector2f &pos) const { pos = posResetNE.tofloat(); return lastPosReset_ms; } // return the amount of vertical position change due to the last vertical position reset in metres // returns the time of the last reset or 0 if no reset has ever occurred uint32_t NavEKF3_core::getLastPosDownReset(float &posD) const { posD = posResetD; return lastPosResetD_ms; } // return the amount of NE velocity change due to the last velocity reset in metres/sec // returns the time of the last reset or 0 if no reset has ever occurred uint32_t NavEKF3_core::getLastVelNorthEastReset(Vector2f &vel) const { vel = velResetNE.tofloat(); return lastVelReset_ms; } // return the NED wind speed estimates in m/s (positive is air moving in the direction of the axis) // returns true if wind state estimation is active bool NavEKF3_core::getWind(Vector3f &wind) const { wind.x = stateStruct.wind_vel.x; wind.y = stateStruct.wind_vel.y; wind.z = 0.0f; // currently don't estimate this return !inhibitWindStates; } // return the NED velocity of the body frame origin in m/s // void NavEKF3_core::getVelNED(Vector3f &vel) const { // correct for the IMU position offset (EKF calculations are at the IMU) vel = (outputDataNew.velocity + velOffsetNED).tofloat(); } // return estimate of true airspeed vector in body frame in m/s // returns false if estimate is unavailable bool NavEKF3_core::getAirSpdVec(Vector3f &vel) const { if (PV_AidingMode == AID_NONE) { return false; } vel = (outputDataNew.velocity + velOffsetNED).tofloat(); if (!inhibitWindStates) { vel.x -= stateStruct.wind_vel.x; vel.y -= stateStruct.wind_vel.y; } Matrix3f Tnb; // rotation from nav to body frame outputDataNew.quat.inverse().rotation_matrix(Tnb); vel = Tnb * vel; return true; } // return the innovation in m/s, innovation variance in (m/s)^2 and age in msec of the last TAS measurement processed // returns false if the data is unavailable bool NavEKF3_core::getAirSpdHealthData(float &innovation, float &innovationVariance, uint32_t &age_ms) const { if (tasDataDelayed.time_ms == 0) { // no data has been processed since startup return false; } innovation = (float)innovVtas; innovationVariance = (float)varInnovVtas; age_ms = imuSampleTime_ms - tasDataDelayed.time_ms; return true; } // Return the rate of change of vertical position in the down direction (dPosD/dt) of the body frame origin in m/s float NavEKF3_core::getPosDownDerivative(void) const { // return the value calculated from a complementary filter applied to the EKF height and vertical acceleration // correct for the IMU offset (EKF calculations are at the IMU) return vertCompFiltState.vel + velOffsetNED.z; } // Write the last estimated NE position of the body frame origin relative to the reference point (m). // Return true if the estimate is valid bool NavEKF3_core::getPosNE(Vector2f &posNE) const { // There are three modes of operation, absolute position (GPS fusion), relative position (optical flow fusion) and constant position (no position estimate available) if (PV_AidingMode != AID_NONE) { // This is the normal mode of operation where we can use the EKF position states // correct for the IMU offset (EKF calculations are at the IMU) posNE = (outputDataNew.position.xy() + posOffsetNED.xy() + public_origin.get_distance_NE_ftype(EKF_origin)).tofloat(); return true; } else { // In constant position mode the EKF position states are at the origin, so we cannot use them as a position estimate if(validOrigin) { auto &gps = dal.gps(); if ((gps.status(selected_gps) >= AP_DAL_GPS::GPS_OK_FIX_2D)) { // If the origin has been set and we have GPS, then return the GPS position relative to the origin const Location &gpsloc = gps.location(selected_gps); posNE = public_origin.get_distance_NE_ftype(gpsloc).tofloat(); return false; #if EK3_FEATURE_BEACON_FUSION } else if (rngBcn.alignmentStarted) { // If we are attempting alignment using range beacon data, then report the position posNE.x = rngBcn.receiverPos.x; posNE.y = rngBcn.receiverPos.y; return false; #endif } else { // If no GPS fix is available, all we can do is provide the last known position posNE = outputDataNew.position.xy().tofloat(); return false; } } else { // If the origin has not been set, then we have no means of providing a relative position posNE.zero(); return false; } } return false; } // Write the last calculated D position of the body frame origin relative to the EKF local origin // Return true if the estimate is valid bool NavEKF3_core::getPosD_local(float &posD) const { posD = outputDataNew.position.z + posOffsetNED.z; // Return the current height solution status return filterStatus.flags.vert_pos; } // Write the last calculated D position of the body frame origin relative to the public origin // Return true if the estimate is valid bool NavEKF3_core::getPosD(float &posD) const { bool ret = getPosD_local(posD); // adjust posD for difference between our origin and the public_origin Location local_origin; if (getOriginLLH(local_origin)) { posD += (public_origin.alt - local_origin.alt) * 0.01; } return ret; } // return the estimated height of body frame origin above ground level bool NavEKF3_core::getHAGL(float &HAGL) const { HAGL = terrainState - outputDataNew.position.z - posOffsetNED.z; // If we know the terrain offset and altitude, then we have a valid height above ground estimate return !hgtTimeout && gndOffsetValid && healthy(); } // Return the last calculated latitude, longitude and height in WGS-84 // If a calculated location isn't available, return a raw GPS measurement // The status will return true if a calculation or raw measurement is available // The getFilterStatus() function provides a more detailed description of data health and must be checked if data is to be used for flight control bool NavEKF3_core::getLLH(Location &loc) const { Location origin; if (getOriginLLH(origin)) { float posD; if (getPosD_local(posD) && PV_AidingMode != AID_NONE) { // Altitude returned is an absolute altitude relative to the WGS-84 spherioid loc.set_alt_cm(origin.alt - posD*100.0, Location::AltFrame::ABSOLUTE); if (filterStatus.flags.horiz_pos_abs || filterStatus.flags.horiz_pos_rel) { // The EKF is able to provide a position estimate loc.lat = EKF_origin.lat; loc.lng = EKF_origin.lng; loc.offset(outputDataNew.position.x + posOffsetNED.x, outputDataNew.position.y + posOffsetNED.y); return true; } else { // We have been be doing inertial dead reckoning for too long so use raw GPS if available if (getGPSLLH(loc)) { return true; } else { // Return the EKF estimate but mark it as invalid loc.lat = EKF_origin.lat; loc.lng = EKF_origin.lng; loc.offset(outputDataNew.position.x + posOffsetNED.x, outputDataNew.position.y + posOffsetNED.y); return false; } } } else { // Return a raw GPS reading if available and the last recorded positon if not if (getGPSLLH(loc)) { return true; } else { loc.lat = EKF_origin.lat; loc.lng = EKF_origin.lng; loc.offset(lastKnownPositionNE.x + posOffsetNED.x, lastKnownPositionNE.y + posOffsetNED.y); loc.alt = EKF_origin.alt - lastKnownPositionD*100.0; return false; } } } else { // The EKF is not navigating so use raw GPS if available return getGPSLLH(loc); } } bool NavEKF3_core::getGPSLLH(Location &loc) const { const auto &gps = dal.gps(); if ((gps.status(selected_gps) >= AP_DAL_GPS::GPS_OK_FIX_3D)) { loc = gps.location(selected_gps); return true; } return false; } // return the horizontal speed limit in m/s set by optical flow sensor limits // return the scale factor to be applied to navigation velocity gains to compensate for increase in velocity noise with height when using optical flow void NavEKF3_core::getEkfControlLimits(float &ekfGndSpdLimit, float &ekfNavVelGainScaler) const { // If in the last 10 seconds we have received flow data and no odometry data, then we are relying on optical flow bool relyingOnFlowData = (imuSampleTime_ms - prevBodyVelFuseTime_ms > 1000) && (imuSampleTime_ms - flowValidMeaTime_ms <= 10000); // If relying on optical flow, limit speed to prevent sensor limit being exceeded and adjust // nav gains to prevent body rate feedback into flow rates destabilising the control loop if (PV_AidingMode == AID_RELATIVE && relyingOnFlowData) { // allow 1.0 rad/sec margin for angular motion ekfGndSpdLimit = MAX((frontend->_maxFlowRate - 1.0f), 0.0f) * MAX((terrainState - stateStruct.position[2]), rngOnGnd); // use standard gains up to 5.0 metres height and reduce above that ekfNavVelGainScaler = 4.0f / MAX((terrainState - stateStruct.position[2]),4.0f); } else { ekfGndSpdLimit = 400.0f; //return 80% of max filter speed ekfNavVelGainScaler = 1.0f; } } // return the LLH location of the filters NED origin bool NavEKF3_core::getOriginLLH(Location &loc) const { if (validOrigin) { loc = public_origin; // report internally corrected reference height if enabled if ((frontend->_originHgtMode & (1<<2)) == 0) { loc.alt = (int32_t)(100.0f * (float)ekfGpsRefHgt); } } return validOrigin; } // return earth magnetic field estimates in measurement units / 1000 void NavEKF3_core::getMagNED(Vector3f &magNED) const { magNED = (stateStruct.earth_magfield * 1000.0f).tofloat(); } // return body magnetic field estimates in measurement units / 1000 void NavEKF3_core::getMagXYZ(Vector3f &magXYZ) const { magXYZ = (stateStruct.body_magfield*1000.0f).tofloat(); } // return magnetometer offsets // return true if offsets are valid bool NavEKF3_core::getMagOffsets(uint8_t mag_idx, Vector3f &magOffsets) const { const auto &compass = dal.compass(); if (!compass.available()) { return false; } // compass offsets are valid if we have finalised magnetic field initialisation, magnetic field learning is not prohibited, // primary compass is valid and state variances have converged const float maxMagVar = 5E-6f; bool variancesConverged = (P[19][19] < maxMagVar) && (P[20][20] < maxMagVar) && (P[21][21] < maxMagVar); if ((mag_idx == magSelectIndex) && finalInflightMagInit && !inhibitMagStates && compass.healthy(magSelectIndex) && variancesConverged) { magOffsets = compass.get_offsets(magSelectIndex) - stateStruct.body_magfield.tofloat()*1000.0; return true; } else { magOffsets = compass.get_offsets(magSelectIndex); return false; } } // return the index for the active magnetometer // return the index for the active airspeed uint8_t NavEKF3_core::getActiveAirspeed() const { return (uint8_t)selected_airspeed; } // return the innovations for the NED Pos, NED Vel, XYZ Mag and Vtas measurements bool NavEKF3_core::getInnovations(Vector3f &velInnov, Vector3f &posInnov, Vector3f &magInnov, float &tasInnov, float &yawInnov) const { velInnov.x = innovVelPos[0]; velInnov.y = innovVelPos[1]; velInnov.z = innovVelPos[2]; posInnov.x = innovVelPos[3]; posInnov.y = innovVelPos[4]; posInnov.z = innovVelPos[5]; magInnov.x = 1e3f*innovMag[0]; // Convert back to sensor units magInnov.y = 1e3f*innovMag[1]; // Convert back to sensor units magInnov.z = 1e3f*innovMag[2]; // Convert back to sensor units tasInnov = innovVtas; yawInnov = innovYaw; return true; } // return the synthetic air data drag and sideslip innovations void NavEKF3_core::getSynthAirDataInnovations(Vector2f &dragInnov, float &betaInnov) const { #if EK3_FEATURE_DRAG_FUSION dragInnov.x = innovDrag[0]; dragInnov.y = innovDrag[1]; betaInnov = innovBeta; #endif } // return the innovation consistency test ratios for the velocity, position, magnetometer and true airspeed measurements // this indicates the amount of margin available when tuning the various error traps // also return the delta in position due to the last position reset bool NavEKF3_core::getVariances(float &velVar, float &posVar, float &hgtVar, Vector3f &magVar, float &tasVar, Vector2f &offset) const { velVar = sqrtF(velTestRatio); posVar = sqrtF(posTestRatio); hgtVar = sqrtF(hgtTestRatio); // If we are using simple compass yaw fusion, populate all three components with the yaw test ratio to provide an equivalent output magVar.x = sqrtF(MAX(magTestRatio.x,yawTestRatio)); magVar.y = sqrtF(MAX(magTestRatio.y,yawTestRatio)); magVar.z = sqrtF(MAX(magTestRatio.z,yawTestRatio)); tasVar = sqrtF(tasTestRatio); offset = posResetNE.tofloat(); return true; } // get a particular source's velocity innovations // returns true on success and results are placed in innovations and variances arguments bool NavEKF3_core::getVelInnovationsAndVariancesForSource(AP_NavEKF_Source::SourceXY source, Vector3f &innovations, Vector3f &variances) const { switch (source) { case AP_NavEKF_Source::SourceXY::GPS: // check for timeouts if (dal.millis() - gpsVelInnovTime_ms > 500) { return false; } innovations = gpsVelInnov.tofloat(); variances = gpsVelVarInnov.tofloat(); return true; #if EK3_FEATURE_EXTERNAL_NAV case AP_NavEKF_Source::SourceXY::EXTNAV: // check for timeouts if (dal.millis() - extNavVelInnovTime_ms > 500) { return false; } innovations = extNavVelInnov.tofloat(); variances = extNavVelVarInnov.tofloat(); return true; #endif // EK3_FEATURE_EXTERNAL_NAV case AP_NavEKF_Source::SourceXY::OPTFLOW: // check for timeouts if (dal.millis() - flowInnovTime_ms > 500) { return false; } innovations.x = flowInnov[0]; innovations.y = flowInnov[1]; innovations.z = 0; variances.x = flowVarInnov[0]; variances.y = flowVarInnov[1]; variances.z = 0; return true; default: // variances are not available for this source return false; } // should never get here but just in case return false; } /* return the filter fault status as a bitmasked integer 0 = quaternions are NaN 1 = velocities are NaN 2 = badly conditioned X magnetometer fusion 3 = badly conditioned Y magnetometer fusion 4 = badly conditioned Z magnetometer fusion 5 = badly conditioned airspeed fusion 6 = badly conditioned synthetic sideslip fusion 7 = filter is not initialised */ void NavEKF3_core::getFilterFaults(uint16_t &faults) const { faults = (stateStruct.quat.is_nan()<<0 | stateStruct.velocity.is_nan()<<1 | faultStatus.bad_xmag<<2 | faultStatus.bad_ymag<<3 | faultStatus.bad_zmag<<4 | faultStatus.bad_airspeed<<5 | faultStatus.bad_sideslip<<6 | !statesInitialised<<7); } // Return the navigation filter status message void NavEKF3_core::getFilterStatus(nav_filter_status &status) const { status = filterStatus; } #if HAL_GCS_ENABLED // send an EKF_STATUS message to GCS void NavEKF3_core::send_status_report(GCS_MAVLINK &link) const { // prepare flags uint16_t flags = 0; if (filterStatus.flags.attitude) { flags |= EKF_ATTITUDE; } if (filterStatus.flags.horiz_vel) { flags |= EKF_VELOCITY_HORIZ; } if (filterStatus.flags.vert_vel) { flags |= EKF_VELOCITY_VERT; } if (filterStatus.flags.horiz_pos_rel) { flags |= EKF_POS_HORIZ_REL; } if (filterStatus.flags.horiz_pos_abs) { flags |= EKF_POS_HORIZ_ABS; } if (filterStatus.flags.vert_pos) { flags |= EKF_POS_VERT_ABS; } if (filterStatus.flags.terrain_alt) { flags |= EKF_POS_VERT_AGL; } if (filterStatus.flags.const_pos_mode) { flags |= EKF_CONST_POS_MODE; } if (filterStatus.flags.pred_horiz_pos_rel) { flags |= EKF_PRED_POS_HORIZ_REL; } if (filterStatus.flags.pred_horiz_pos_abs) { flags |= EKF_PRED_POS_HORIZ_ABS; } if (!filterStatus.flags.initalized) { flags |= EKF_UNINITIALIZED; } if (filterStatus.flags.gps_glitching) { flags |= (1<<15); } // get variances float velVar = 0, posVar = 0, hgtVar = 0, tasVar = 0; Vector3f magVar; Vector2f offset; getVariances(velVar, posVar, hgtVar, magVar, tasVar, offset); // Only report range finder normalised innovation levels if the EKF needs the data for primary // height estimation or optical flow operation. This prevents false alarms at the GCS if a // range finder is fitted for other applications float temp = 0; if (((frontend->_useRngSwHgt > 0) && activeHgtSource == AP_NavEKF_Source::SourceZ::RANGEFINDER) || (PV_AidingMode == AID_RELATIVE && flowDataValid)) { temp = sqrtF(auxRngTestRatio); } const mavlink_ekf_status_report_t packet{ velVar, posVar, hgtVar, fmaxf(fmaxf(magVar.x,magVar.y),magVar.z), temp, flags, tasVar }; // send message mavlink_msg_ekf_status_report_send_struct(link.get_chan(), &packet); } #endif // HAL_GCS_ENABLED // report the reason for why the backend is refusing to initialise const char *NavEKF3_core::prearm_failure_reason(void) const { if (gpsGoodToAlign) { // we are not failing return nullptr; } return prearm_fail_string; } // report the number of frames lapsed since the last state prediction // this is used by other instances to level load uint8_t NavEKF3_core::getFramesSincePredict(void) const { return framesSincePredict; }