// These are function definitions so the Menu can be constructed before the functions // are defined below. Order matters to the compiler. static int8_t test_radio_pwm(uint8_t argc, const Menu::arg *argv); static int8_t test_radio(uint8_t argc, const Menu::arg *argv); static int8_t test_failsafe(uint8_t argc, const Menu::arg *argv); static int8_t test_stabilize(uint8_t argc, const Menu::arg *argv); static int8_t test_fbw(uint8_t argc, const Menu::arg *argv); static int8_t test_gps(uint8_t argc, const Menu::arg *argv); static int8_t test_adc(uint8_t argc, const Menu::arg *argv); static int8_t test_imu(uint8_t argc, const Menu::arg *argv); static int8_t test_dcm(uint8_t argc, const Menu::arg *argv); static int8_t test_omega(uint8_t argc, const Menu::arg *argv); static int8_t test_battery(uint8_t argc, const Menu::arg *argv); static int8_t test_current(uint8_t argc, const Menu::arg *argv); static int8_t test_relay(uint8_t argc, const Menu::arg *argv); static int8_t test_wp(uint8_t argc, const Menu::arg *argv); static int8_t test_pressure(uint8_t argc, const Menu::arg *argv); static int8_t test_mag(uint8_t argc, const Menu::arg *argv); static int8_t test_xbee(uint8_t argc, const Menu::arg *argv); static int8_t test_eedump(uint8_t argc, const Menu::arg *argv); // This is the help function // PSTR is an AVR macro to read strings from flash memory // printf_P is a version of printf that reads from flash memory /*static int8_t help_test(uint8_t argc, const Menu::arg *argv) { Serial.printf_P(PSTR("\n" "Commands:\n" " radio\n" " servos\n" " gps\n" " imu\n" " battery\n" "\n")); }*/ // Creates a constant array of structs representing menu options // and stores them in Flash memory, not RAM. // User enters the string in the console to call the functions on the right. // See class Menu in AP_Coommon for implementation details const struct Menu::command test_menu_commands[] PROGMEM = { {"pwm", test_radio_pwm}, {"radio", test_radio}, {"failsafe", test_failsafe}, {"stabilize", test_stabilize}, {"fbw", test_fbw}, {"gps", test_gps}, {"adc", test_adc}, {"imu", test_imu}, {"dcm", test_dcm}, {"omega", test_omega}, {"battery", test_battery}, {"current", test_current}, {"relay", test_relay}, {"waypoints", test_wp}, {"airpressure", test_pressure}, {"compass", test_mag}, {"xbee", test_xbee}, {"eedump", test_eedump}, }; // A Macro to create the Menu MENU(test_menu, "test", test_menu_commands); int8_t test_mode(uint8_t argc, const Menu::arg *argv) { Serial.printf_P(PSTR("Test Mode\n\n")); test_menu.run(); } static int8_t test_eedump(uint8_t argc, const Menu::arg *argv) { int i, j; // hexdump the EEPROM for (i = 0; i < EEPROM_MAX_ADDR; i += 16) { Serial.printf_P(PSTR("%04x:"), i); for (j = 0; j < 16; j++) Serial.printf_P(PSTR(" %02x"), eeprom_read_byte((const uint8_t *)(i + j))); Serial.println(); } return(0); } static int8_t test_radio_pwm(uint8_t argc, const Menu::arg *argv) { print_hit_enter(); delay(1000); while(1){ delay(20); // Filters radio input - adjust filters in the radio.pde file // ---------------------------------------------------------- read_radio(); Serial.printf_P(PSTR("IN: 1: %d\t2: %d\t3: %d\t4: %d\t5: %d\t6: %d\t7: %d\t8: %d\n"), rc_1.radio_in, rc_2.radio_in, rc_3.radio_in, rc_4.radio_in, rc_5.radio_in, rc_6.radio_in, rc_7.radio_in, rc_8.radio_in); if(Serial.available() > 0){ return (0); } } } static int8_t test_radio(uint8_t argc, const Menu::arg *argv) { print_hit_enter(); delay(1000); // read the radio to set trims // --------------------------- trim_radio(); while(1){ delay(20); read_radio(); output_manual_throttle(); rc_1.calc_pwm(); rc_2.calc_pwm(); rc_3.calc_pwm(); rc_4.calc_pwm(); Serial.printf_P(PSTR("IN 1: %d\t2: %d\t3: %d\t4: %d\t5: %d\t6: %d\t7: %d\n"), (rc_1.control_in), (rc_2.control_in), (rc_3.control_in), (rc_4.control_in), rc_5.control_in, rc_6.control_in, rc_7.control_in); //Serial.printf_P(PSTR("OUT 1: %d\t2: %d\t3: %d\t4: %d\n"), (rc_1.servo_out / 100), (rc_2.servo_out / 100), rc_3.servo_out, (rc_4.servo_out / 100)); /*Serial.printf_P(PSTR( "min: %d" "\t in: %d" "\t pwm_in: %d" "\t sout: %d" "\t pwm_out %d\n"), rc_3.radio_min, rc_3.control_in, rc_3.radio_in, rc_3.servo_out, rc_3.pwm_out ); */ if(Serial.available() > 0){ return (0); } } } static int8_t test_failsafe(uint8_t argc, const Menu::arg *argv) { byte fail_test; print_hit_enter(); for(int i = 0; i < 50; i++){ delay(20); read_radio(); } // read the radio to set trims // --------------------------- trim_radio(); oldSwitchPosition = readSwitch(); Serial.printf_P(PSTR("Unplug battery, throttle in neutral, turn off radio.\n")); while(rc_3.control_in > 0){ delay(20); read_radio(); } while(1){ delay(20); read_radio(); if(rc_3.control_in > 0){ Serial.printf_P(PSTR("THROTTLE CHANGED %d \n"), rc_3.control_in); fail_test++; } if(oldSwitchPosition != readSwitch()){ Serial.printf_P(PSTR("CONTROL MODE CHANGED: ")); Serial.println(flight_mode_strings[readSwitch()]); fail_test++; } if(throttle_failsafe_enabled && rc_3.get_failsafe()){ Serial.printf_P(PSTR("THROTTLE FAILSAFE ACTIVATED: %d, "), rc_3.radio_in); Serial.println(flight_mode_strings[readSwitch()]); fail_test++; } if(fail_test > 0){ return (0); } if(Serial.available() > 0){ Serial.printf_P(PSTR("LOS caused no change in ACM.\n")); return (0); } } } static int8_t test_stabilize(uint8_t argc, const Menu::arg *argv) { static byte ts_num; print_hit_enter(); delay(1000); // setup the radio // --------------- init_rc_in(); control_mode = STABILIZE; Serial.printf_P(PSTR("pid_stabilize_roll.kP: %4.4f\n"), pid_stabilize_roll.kP()); Serial.printf_P(PSTR("max_stabilize_dampener:%d\n\n "), max_stabilize_dampener); trim_radio(); motor_auto_safe = false; motor_armed = true; while(1){ // 50 hz if (millis() - fast_loopTimer > 19) { delta_ms_fast_loop = millis() - fast_loopTimer; fast_loopTimer = millis(); G_Dt = (float)delta_ms_fast_loop / 1000.f; if(compass_enabled){ medium_loopCounter++; if(medium_loopCounter == 5){ compass.read(); // Read magnetometer compass.calculate(roll, pitch); // Calculate heading medium_loopCounter = 0; } } // for trim features read_trim_switch(); // Filters radio input - adjust filters in the radio.pde file // ---------------------------------------------------------- read_radio(); // IMU // --- read_AHRS(); // allow us to zero out sensors with control switches if(rc_5.control_in < 600){ dcm.roll_sensor = dcm.pitch_sensor = 0; } // custom code/exceptions for flight modes // --------------------------------------- update_current_flight_mode(); // write out the servo PWM values // ------------------------------ set_servos_4(); ts_num++; if (ts_num > 10){ ts_num = 0; Serial.printf_P(PSTR("r: %d, p:%d, rc1:%d, Int:%4.4f, "), (int)(dcm.roll_sensor/100), (int)(dcm.pitch_sensor/100), rc_1.pwm_out, pid_stabilize_roll.get_integrator()); print_motor_out(); } // R: 1417, L: 1453 F: 1453 B: 1417 //Serial.printf_P(PSTR("timer: %d, r: %d\tp: %d\t y: %d\n"), (int)delta_ms_fast_loop, ((int)dcm.roll_sensor/100), ((int)dcm.pitch_sensor/100), ((uint16_t)dcm.yaw_sensor/100)); //Serial.printf_P(PSTR("timer: %d, r: %d\tp: %d\t y: %d\n"), (int)delta_ms_fast_loop, ((int)dcm.roll_sensor/100), ((int)dcm.pitch_sensor/100), ((uint16_t)dcm.yaw_sensor/100)); if(Serial.available() > 0){ return (0); } } } } static int8_t test_fbw(uint8_t argc, const Menu::arg *argv) { static byte ts_num; print_hit_enter(); delay(1000); // setup the radio // --------------- init_rc_in(); control_mode = FBW; //Serial.printf_P(PSTR("pid_stabilize_roll.kP: %4.4f\n"), pid_stabilize_roll.kP()); //Serial.printf_P(PSTR("max_stabilize_dampener:%d\n\n "), max_stabilize_dampener); motor_armed = true; trim_radio(); nav_yaw = 8000; scaleLongDown = 1; while(1){ // 50 hz if (millis() - fast_loopTimer > 19) { delta_ms_fast_loop = millis() - fast_loopTimer; fast_loopTimer = millis(); G_Dt = (float)delta_ms_fast_loop / 1000.f; if(compass_enabled){ medium_loopCounter++; if(medium_loopCounter == 5){ compass.read(); // Read magnetometer compass.calculate(roll, pitch); // Calculate heading medium_loopCounter = 0; } } // for trim features read_trim_switch(); // Filters radio input - adjust filters in the radio.pde file // ---------------------------------------------------------- read_radio(); // IMU // --- read_AHRS(); // allow us to zero out sensors with control switches if(rc_5.control_in < 600){ dcm.roll_sensor = dcm.pitch_sensor = 0; } // custom code/exceptions for flight modes // --------------------------------------- update_current_flight_mode(); // write out the servo PWM values // ------------------------------ set_servos_4(); ts_num++; if (ts_num == 5){ // 10 hz ts_num = 0; GPS.longitude = 0; GPS.latitude = 0; calc_nav(); Serial.printf_P(PSTR("ys:%ld, WP.lat:%ld, WP.lng:%ld, n_lat:%ld, n_lon:%ld, nroll:%ld, npitch:%ld, pmax:%ld, \t- "), dcm.yaw_sensor, next_WP.lat, next_WP.lng, nav_lat, nav_lon, nav_roll, nav_pitch, pitch_max); print_motor_out(); } if(Serial.available() > 0){ return (0); } } } } static int8_t test_adc(uint8_t argc, const Menu::arg *argv) { print_hit_enter(); adc.Init(); delay(1000); Serial.printf_P(PSTR("ADC\n")); delay(1000); while(1){ for(int i = 0; i < 9; i++){ Serial.printf_P(PSTR("i:%d\t"),adc.Ch(i)); } Serial.println(); delay(20); if(Serial.available() > 0){ return (0); } } } static int8_t test_imu(uint8_t argc, const Menu::arg *argv) { //Serial.printf_P(PSTR("Calibrating.")); imu.init_gyro(); print_hit_enter(); delay(1000); while(1){ delay(20); if (millis() - fast_loopTimer > 19) { delta_ms_fast_loop = millis() - fast_loopTimer; G_Dt = (float)delta_ms_fast_loop / 1000.f; // used by DCM integrator fast_loopTimer = millis(); // IMU // --- read_AHRS(); Vector3f accels = imu.get_accel(); Vector3f gyros = imu.get_gyro(); if(compass_enabled){ medium_loopCounter++; if(medium_loopCounter == 5){ compass.read(); // Read magnetometer compass.calculate(roll, pitch); // Calculate heading medium_loopCounter = 0; } } // We are using the IMU // --------------------- Serial.printf_P(PSTR("A: %4.4f, %4.4f, %4.4f\t" "G: %4.4f, %4.4f, %4.4f\t"), accels.x, accels.y, accels.z, gyros.x, gyros.y, gyros.z); Serial.printf_P(PSTR("r: %ld\tp: %ld\t y: %ld\n"), dcm.roll_sensor, dcm.pitch_sensor, dcm.yaw_sensor); } if(Serial.available() > 0){ return (0); } } } static int8_t test_gps(uint8_t argc, const Menu::arg *argv) { print_hit_enter(); delay(1000); while(1){ delay(100); update_GPS(); if(Serial.available() > 0){ return (0); } if(home.lng != 0){ break; } } while(1){ delay(100); calc_distance_error(); // Blink GPS LED if we don't have a fix // ------------------------------------ //update_GPS_light(); GPS.update(); if (GPS.new_data){ Serial.print("Lat:"); Serial.print((float)GPS.latitude/10000000, 10); Serial.print(" Lon:"); Serial.print((float)GPS.longitude/10000000, 10); Serial.printf_P(PSTR(" alt %dm, spd: %d dist:%d, #sats: %d\n"), (int)GPS.altitude/100, (int)GPS.ground_speed, (int)wp_distance, (int)GPS.num_sats); }else{ //Serial.print("."); } if(Serial.available() > 0){ return (0); } } } static int8_t test_dcm(uint8_t argc, const Menu::arg *argv) { print_hit_enter(); delay(1000); Serial.printf_P(PSTR("Gyro | Accel\n")); Vector3f _cam_vector; Vector3f _out_vector; G_Dt = .02; while(1){ for(byte i = 0; i <= 50; i++){ delay(20); // IMU // --- read_AHRS(); } Matrix3f temp = dcm.get_dcm_matrix(); Matrix3f temp_t = dcm.get_dcm_transposed(); Serial.printf_P(PSTR("dcm\n" "%4.4f \t %4.4f \t %4.4f \n" "%4.4f \t %4.4f \t %4.4f \n" "%4.4f \t %4.4f \t %4.4f \n\n"), temp.a.x, temp.a.y, temp.a.z, temp.b.x, temp.b.y, temp.b.z, temp.c.x, temp.c.y, temp.c.z); int _pitch = degrees(-asin(temp.c.x)); int _roll = degrees(atan2(temp.c.y, temp.c.z)); int _yaw = degrees(atan2(temp.b.x, temp.a.x)); Serial.printf_P(PSTR( "angles\n" "%d \t %d \t %d\n\n"), _pitch, _roll, _yaw); //_out_vector = _cam_vector * temp; //Serial.printf_P(PSTR( "cam\n" // "%d \t %d \t %d\n\n"), // (int)temp.a.x * 100, (int)temp.a.y * 100, (int)temp.a.x * 100); if(Serial.available() > 0){ return (0); } } } /* static int8_t test_dcm(uint8_t argc, const Menu::arg *argv) { print_hit_enter(); delay(1000); Serial.printf_P(PSTR("Gyro | Accel\n")); delay(1000); while(1){ Vector3f accels = dcm.get_accel(); Serial.print("accels.z:"); Serial.print(accels.z); Serial.print("omega.z:"); Serial.print(omega.z); delay(100); if(Serial.available() > 0){ return (0); } } } */ static int8_t test_omega(uint8_t argc, const Menu::arg *argv) { static byte ts_num; float old_yaw; print_hit_enter(); delay(1000); Serial.printf_P(PSTR("Omega")); delay(1000); G_Dt = .02; while(1){ delay(20); // IMU // --- read_AHRS(); float my_oz = (dcm.yaw - old_yaw) * 50; old_yaw = dcm.yaw; ts_num++; if (ts_num > 2){ ts_num = 0; //Serial.printf_P(PSTR("R: %4.4f\tP: %4.4f\tY: %4.4f\tY: %4.4f\n"), omega.x, omega.y, omega.z, my_oz); Serial.printf_P(PSTR(" Yaw: %ld\tY: %4.4f\tY: %4.4f\n"), dcm.yaw_sensor, omega.z, my_oz); } if(Serial.available() > 0){ return (0); } } return (0); } static int8_t test_battery(uint8_t argc, const Menu::arg *argv) { #if BATTERY_EVENT == 1 for (int i = 0; i < 20; i++){ delay(20); read_battery(); } Serial.printf_P(PSTR("Volts: 1:")); Serial.print(battery_voltage1, 4); Serial.print(" 2:"); Serial.print(battery_voltage2, 4); Serial.print(" 3:"); Serial.print(battery_voltage3, 4); Serial.print(" 4:"); Serial.println(battery_voltage4, 4); #else Serial.printf_P(PSTR("Not enabled\n")); #endif return (0); } static int8_t test_current(uint8_t argc, const Menu::arg *argv) { print_hit_enter(); delta_ms_medium_loop = 100; while(1){ delay(100); read_radio(); read_current(); Serial.printf_P(PSTR("V: %4.4f, A: %4.4f, mAh: %4.4f\n"), current_voltage, current_amps, current_total); //if(rc_3.control_in > 0){ APM_RC.OutputCh(CH_1, rc_3.radio_in); APM_RC.OutputCh(CH_2, rc_3.radio_in); APM_RC.OutputCh(CH_3, rc_3.radio_in); APM_RC.OutputCh(CH_4, rc_3.radio_in); //} if(Serial.available() > 0){ return (0); } } } static int8_t test_relay(uint8_t argc, const Menu::arg *argv) { print_hit_enter(); delay(1000); while(1){ Serial.println("Relay A"); relay_A(); delay(3000); if(Serial.available() > 0){ return (0); } Serial.println("Relay B"); relay_B(); delay(3000); if(Serial.available() > 0){ return (0); } } } static int8_t test_wp(uint8_t argc, const Menu::arg *argv) { delay(1000); read_EEPROM_waypoint_info(); // save the alitude above home option if(alt_to_hold == -1){ Serial.printf_P(PSTR("Hold current altitude\n")); }else{ Serial.printf_P(PSTR("Hold altitude of %dm\n"), alt_to_hold/100); } Serial.printf_P(PSTR("%d waypoints\n"), wp_total); Serial.printf_P(PSTR("Hit radius: %d\n"), wp_radius); Serial.printf_P(PSTR("Loiter radius: %d\n\n"), loiter_radius); for(byte i = 0; i <= wp_total; i++){ struct Location temp = get_wp_with_index(i); print_waypoint(&temp, i); } return (0); } static int8_t test_xbee(uint8_t argc, const Menu::arg *argv) { print_hit_enter(); delay(1000); Serial.printf_P(PSTR("Begin XBee X-CTU Range and RSSI Test:\n")); while(1){ delay(250); // Timeout set high enough for X-CTU RSSI Calc over XBee @ 115200 Serial3.printf_P(PSTR("0123456789:;<=>?@ABCDEFGHIJKLMNO\n")); //Serial.print("X"); // Default 32bit data from X-CTU Range Test if(Serial.available() > 0){ return (0); } } } static int8_t test_pressure(uint8_t argc, const Menu::arg *argv) { uint32_t sum; Serial.printf_P(PSTR("Uncalibrated Abs Airpressure\n")); Serial.printf_P(PSTR("Altitude is relative to the start of this test\n")); print_hit_enter(); Serial.printf_P(PSTR("\nCalibrating....\n")); /* for (int i = 1; i < 301; i++) { read_barometer(); if(i > 200) sum += abs_pressure; delay(10); } abs_pressure_ground = (float)sum / 100.0; */ home.alt = 0; wp_distance = 0; init_pressure_ground(); while(1){ if (millis()-fast_loopTimer > 9) { delta_ms_fast_loop = millis() - fast_loopTimer; G_Dt = (float)delta_ms_fast_loop / 1000.f; // used by DCM integrator fast_loopTimer = millis(); calc_altitude_error(); calc_nav_throttle(); } if (millis()-medium_loopTimer > 100) { medium_loopTimer = millis(); read_radio(); // read the radio first next_WP.alt = home.alt + rc_6.control_in; // 0 - 2000 (20 meters) read_trim_switch(); read_barometer(); //Serial.printf_P(PSTR("Alt: %dm, Raw: %d\n"), pressure_altitude / 100, abs_pressure); // Someone needs to fix the formatting here for long integers /* Serial.print("Altitude: "); Serial.print((int)current_loc.alt,DEC); Serial.print("\tnext_alt: "); Serial.print((int)next_WP.alt,DEC); Serial.print("\talt_err: "); Serial.print((int)altitude_error,DEC); Serial.print("\ttNom: "); Serial.print(throttle_cruise,DEC); Serial.print("\ttOut: "); Serial.println(rc_3.servo_out,DEC); */ //Serial.print(" Raw pressure value: "); //Serial.println(abs_pressure); } if(Serial.available() > 0){ return (0); } } } static int8_t test_mag(uint8_t argc, const Menu::arg *argv) { if(compass_enabled == false){ Serial.printf_P(PSTR("Compass disabled\n")); return (0); }else{ print_hit_enter(); while(1){ delay(250); compass.read(); compass.calculate(0,0); Serial.printf_P(PSTR("Heading: (")); Serial.print(ToDeg(compass.heading)); Serial.printf_P(PSTR(") XYZ: (")); Serial.print(compass.mag_x); Serial.print(comma); Serial.print(compass.mag_y); Serial.print(comma); Serial.print(compass.mag_z); Serial.println(")"); if(Serial.available() > 0){ return (0); } } } } void print_hit_enter() { Serial.printf_P(PSTR("Hit Enter to exit.\n\n")); } void print_motor_out(){ Serial.printf("out: R: %d, L: %d F: %d B: %d\n", (motor_out[RIGHT] - rc_3.radio_min), (motor_out[LEFT] - rc_3.radio_min), (motor_out[FRONT] - rc_3.radio_min), (motor_out[BACK] - rc_3.radio_min)); }