''' Fly Helicopter in SITL AP_FLAKE8_CLEAN ''' from __future__ import print_function from arducopter import AutoTestCopter from common import AutoTest from common import NotAchievedException, AutoTestTimeoutException from pymavlink import mavutil from pysim import vehicleinfo import copy class AutoTestHelicopter(AutoTestCopter): sitl_start_loc = mavutil.location(40.072842, -105.230575, 1586, 0) # Sparkfun AVC Location def vehicleinfo_key(self): return 'Helicopter' def log_name(self): return "HeliCopter" def default_frame(self): return "heli" def sitl_start_location(self): return self.sitl_start_loc def default_speedup(self): '''Heli seems to be race-free''' return 100 def is_heli(self): return True def rc_defaults(self): ret = super(AutoTestHelicopter, self).rc_defaults() ret[8] = 1000 ret[3] = 1000 # collective return ret @staticmethod def get_position_armable_modes_list(): '''filter THROW mode out of armable modes list; Heli is special-cased''' ret = AutoTestCopter.get_position_armable_modes_list() ret = filter(lambda x : x != "THROW", ret) return ret def loiter_requires_position(self): self.progress("Skipping loiter-requires-position for heli; rotor runup issues") def get_collective_out(self): servo = self.mav.recv_match(type='SERVO_OUTPUT_RAW', blocking=True) chan_pwm = (servo.servo1_raw + servo.servo2_raw + servo.servo3_raw)/3.0 return chan_pwm def RotorRunup(self): '''Test rotor runip''' # Takeoff and landing in Loiter TARGET_RUNUP_TIME = 10 self.zero_throttle() self.change_mode('LOITER') self.wait_ready_to_arm() self.arm_vehicle() servo = self.mav.recv_match(type='SERVO_OUTPUT_RAW', blocking=True) coll = servo.servo1_raw coll = coll + 50 self.set_parameter("H_RSC_RUNUP_TIME", TARGET_RUNUP_TIME) self.progress("Initiate Runup by putting some throttle") self.set_rc(8, 2000) self.set_rc(3, 1700) self.progress("Collective threshold PWM %u" % coll) tstart = self.get_sim_time() self.progress("Wait that collective PWM pass threshold value") servo = self.mav.recv_match(condition='SERVO_OUTPUT_RAW.servo1_raw>%u' % coll, blocking=True) runup_time = self.get_sim_time() - tstart self.progress("Collective is now at PWM %u" % servo.servo1_raw) self.mav.wait_heartbeat() if runup_time < TARGET_RUNUP_TIME: self.zero_throttle() self.set_rc(8, 1000) self.disarm_vehicle() self.mav.wait_heartbeat() raise NotAchievedException("Takeoff initiated before runup time complete %u" % runup_time) self.progress("Runup time %u" % runup_time) self.zero_throttle() self.set_rc(8, 1000) self.land_and_disarm() self.mav.wait_heartbeat() # fly_avc_test - fly AVC mission def AVCMission(self): '''fly AVC mission''' self.change_mode('STABILIZE') self.wait_ready_to_arm() self.arm_vehicle() self.progress("Raising rotor speed") self.set_rc(8, 2000) # upload mission from file self.progress("# Load copter_AVC2013_mission") # load the waypoint count num_wp = self.load_mission("copter_AVC2013_mission.txt", strict=False) if not num_wp: raise NotAchievedException("load copter_AVC2013_mission failed") self.progress("Fly AVC mission from 1 to %u" % num_wp) self.set_current_waypoint(1) # wait for motor runup self.delay_sim_time(20) # switch into AUTO mode and raise throttle self.change_mode('AUTO') self.set_rc(3, 1500) # fly the mission self.wait_waypoint(0, num_wp-1, timeout=500) # set throttle to minimum self.zero_throttle() # wait for disarm self.wait_disarmed() self.progress("MOTORS DISARMED OK") self.progress("Lowering rotor speed") self.set_rc(8, 1000) self.progress("AVC mission completed: passed!") def takeoff(self, alt_min=30, takeoff_throttle=1700, require_absolute=True, mode="STABILIZE", timeout=120): """Takeoff get to 30m altitude.""" self.progress("TAKEOFF") self.change_mode(mode) if not self.armed(): self.wait_ready_to_arm(require_absolute=require_absolute, timeout=timeout) self.zero_throttle() self.arm_vehicle() self.progress("Raising rotor speed") self.set_rc(8, 2000) self.progress("wait for rotor runup to complete") if self.get_parameter("H_RSC_MODE") == 4: self.context_collect('STATUSTEXT') self.wait_statustext("Governor Engaged", check_context=True) elif self.get_parameter("H_RSC_MODE") == 3: self.wait_rpm(1, 1300, 1400) else: self.wait_servo_channel_value(8, 1659, timeout=10) # wait for motor runup self.delay_sim_time(20) if mode == 'GUIDED': self.user_takeoff(alt_min=alt_min) else: self.set_rc(3, takeoff_throttle) self.wait_altitude(alt_min-1, alt_min+5, relative=True, timeout=timeout) self.hover() self.progress("TAKEOFF COMPLETE") def FlyEachFrame(self): '''Fly each supported internal frame''' vinfo = vehicleinfo.VehicleInfo() vinfo_options = vinfo.options[self.vehicleinfo_key()] known_broken_frames = { } for frame in sorted(vinfo_options["frames"].keys()): self.start_subtest("Testing frame (%s)" % str(frame)) if frame in known_broken_frames: self.progress("Actually, no I'm not - it is known-broken (%s)" % (known_broken_frames[frame])) continue frame_bits = vinfo_options["frames"][frame] print("frame_bits: %s" % str(frame_bits)) if frame_bits.get("external", False): self.progress("Actually, no I'm not - it is an external simulation") continue model = frame_bits.get("model", frame) # the model string for Callisto has crap in it.... we # should really have another entry in the vehicleinfo data # to carry the path to the JSON. actual_model = model.split(":")[0] defaults = self.model_defaults_filepath(actual_model) if type(defaults) != list: defaults = [defaults] self.customise_SITL_commandline( ["--defaults", ','.join(defaults), ], model=model, wipe=True, ) self.takeoff(10) self.do_RTL() self.set_rc(8, 1000) def governortest(self): '''Test Heli Internal Throttle Curve and Governor''' self.customise_SITL_commandline( ["--defaults", ','.join(self.model_defaults_filepath('heli-gas')), ], model="heli-gas", wipe=True, ) self.set_parameter("H_RSC_MODE", 4) self.takeoff(10) self.do_RTL() self.set_rc(8, 1000) def hover(self): self.progress("Setting hover collective") self.set_rc(3, 1500) def PosHoldTakeOff(self): """ensure vehicle stays put until it is ready to fly""" self.context_push() ex = None try: self.set_parameter("PILOT_TKOFF_ALT", 700) self.change_mode('POSHOLD') self.zero_throttle() self.set_rc(8, 1000) self.wait_ready_to_arm() # Arm self.arm_vehicle() self.progress("Raising rotor speed") self.set_rc(8, 2000) self.progress("wait for rotor runup to complete") self.wait_servo_channel_value(8, 1659, timeout=10) self.delay_sim_time(20) # check we are still on the ground... m = self.mav.recv_match(type='GLOBAL_POSITION_INT', blocking=True) max_relalt_mm = 1000 if abs(m.relative_alt) > max_relalt_mm: raise NotAchievedException("Took off prematurely (abs(%f)>%f)" % (m.relative_alt, max_relalt_mm)) self.progress("Pushing collective past half-way") self.set_rc(3, 1600) self.delay_sim_time(0.5) self.hover() # make sure we haven't already reached alt: m = self.mav.recv_match(type='GLOBAL_POSITION_INT', blocking=True) max_initial_alt = 1500 if abs(m.relative_alt) > max_initial_alt: raise NotAchievedException("Took off too fast (%f > %f" % (abs(m.relative_alt), max_initial_alt)) self.progress("Monitoring takeoff-to-alt") self.wait_altitude(6.9, 8, relative=True) self.progress("Making sure we stop at our takeoff altitude") tstart = self.get_sim_time() while self.get_sim_time() - tstart < 5: m = self.mav.recv_match(type='GLOBAL_POSITION_INT', blocking=True) delta = abs(7000 - m.relative_alt) self.progress("alt=%f delta=%f" % (m.relative_alt/1000, delta/1000)) if delta > 1000: raise NotAchievedException("Failed to maintain takeoff alt") self.progress("takeoff OK") except Exception as e: self.print_exception_caught(e) ex = e self.land_and_disarm() self.set_rc(8, 1000) self.context_pop() if ex is not None: raise ex def StabilizeTakeOff(self): """Fly stabilize takeoff""" self.context_push() ex = None try: self.change_mode('STABILIZE') self.set_rc(3, 1000) self.set_rc(8, 1000) self.wait_ready_to_arm() self.arm_vehicle() self.set_rc(8, 2000) self.progress("wait for rotor runup to complete") self.wait_servo_channel_value(8, 1659, timeout=10) self.delay_sim_time(20) # check we are still on the ground... m = self.mav.recv_match(type='GLOBAL_POSITION_INT', blocking=True) if abs(m.relative_alt) > 100: raise NotAchievedException("Took off prematurely") self.progress("Pushing throttle past half-way") self.set_rc(3, 1650) self.progress("Monitoring takeoff") self.wait_altitude(6.9, 8, relative=True) self.progress("takeoff OK") except Exception as e: self.print_exception_caught(e) ex = e self.land_and_disarm() self.set_rc(8, 1000) self.context_pop() if ex is not None: raise ex def SplineWaypoint(self, timeout=600): """ensure basic spline functionality works""" self.load_mission("copter_spline_mission.txt", strict=False) self.change_mode("LOITER") self.wait_ready_to_arm() self.arm_vehicle() self.progress("Raising rotor speed") self.set_rc(8, 2000) self.delay_sim_time(20) self.change_mode("AUTO") self.set_rc(3, 1500) tstart = self.get_sim_time() while True: if self.get_sim_time() - tstart > timeout: raise AutoTestTimeoutException("Vehicle did not disarm after mission") if not self.armed(): break self.delay_sim_time(1) self.progress("Lowering rotor speed") self.set_rc(8, 1000) def AutoRotation(self, timeout=600): """Check engine-out behaviour""" self.set_parameter("AROT_ENABLE", 1) start_alt = 100 # metres self.set_parameter("PILOT_TKOFF_ALT", start_alt * 100) self.change_mode('POSHOLD') self.set_rc(3, 1000) self.set_rc(8, 1000) self.wait_ready_to_arm() self.arm_vehicle() self.set_rc(8, 2000) self.progress("wait for rotor runup to complete") self.wait_servo_channel_value(8, 1659, timeout=10) self.delay_sim_time(20) self.set_rc(3, 2000) self.wait_altitude(start_alt - 1, (start_alt + 5), relative=True, timeout=timeout) self.context_collect('STATUSTEXT') self.progress("Triggering autorotate by raising interlock") self.set_rc(8, 1000) self.wait_statustext("SS Glide Phase", check_context=True) self.wait_statustext(r"SIM Hit ground at ([0-9.]+) m/s", check_context=True, regex=True) speed = float(self.re_match.group(1)) if speed > 30: raise NotAchievedException("Hit too hard") self.wait_disarmed() def ManAutoRotation(self, timeout=600): """Check autorotation power recovery behaviour""" RAMP_TIME = 4 AROT_RAMP_TIME = 2 self.set_parameter("H_RSC_AROT_MN_EN", 1) self.set_parameter("H_RSC_AROT_ENG_T", AROT_RAMP_TIME) self.set_parameter("H_RSC_AROT_IDLE", 20) self.set_parameter("H_RSC_RAMP_TIME", RAMP_TIME) self.set_parameter("H_RSC_IDLE", 0) start_alt = 100 # metres self.set_parameter("PILOT_TKOFF_ALT", start_alt * 100) self.change_mode('POSHOLD') self.set_rc(3, 1000) self.set_rc(8, 1000) self.wait_ready_to_arm() self.arm_vehicle() self.set_rc(8, 2000) self.progress("wait for rotor runup to complete") self.wait_servo_channel_value(8, 1659, timeout=10) self.delay_sim_time(20) self.set_rc(3, 2000) self.wait_altitude(start_alt - 1, (start_alt + 5), relative=True, timeout=timeout) self.context_collect('STATUSTEXT') self.change_mode('STABILIZE') self.progress("Triggering manual autorotation by disabling interlock") self.set_rc(3, 1000) self.set_rc(8, 1000) self.wait_servo_channel_value(8, 1199, timeout=3) self.progress("channel 8 set to autorotation window") # wait to establish autorotation self.delay_sim_time(2) self.set_rc(8, 2000) self.wait_servo_channel_value(8, 1659, timeout=AROT_RAMP_TIME * 1.1) # give time for engine to power up self.set_rc(3, 1400) self.delay_sim_time(2) self.progress("in-flight power recovery") self.set_rc(3, 1500) self.delay_sim_time(5) # initiate autorotation again self.set_rc(3, 1000) self.set_rc(8, 1000) self.wait_statustext(r"SIM Hit ground at ([0-9.]+) m/s", check_context=True, regex=True) speed = float(self.re_match.group(1)) if speed > 30: raise NotAchievedException("Hit too hard") self.set_rc(3, 1000) # verify servo 8 resets to RSC_IDLE after land complete self.wait_servo_channel_value(8, 1000, timeout=3) self.wait_disarmed() def mission_item_home(self, target_system, target_component): '''returns a mission_item_int which can be used as home in a mission''' return self.mav.mav.mission_item_int_encode( target_system, target_component, 0, # seq mavutil.mavlink.MAV_FRAME_GLOBAL_INT, mavutil.mavlink.MAV_CMD_NAV_WAYPOINT, 0, # current 0, # autocontinue 3, # p1 0, # p2 0, # p3 0, # p4 int(1.0000 * 1e7), # latitude int(2.0000 * 1e7), # longitude 31.0000, # altitude mavutil.mavlink.MAV_MISSION_TYPE_MISSION) def mission_item_takeoff(self, target_system, target_component): '''returns a mission_item_int which can be used as takeoff in a mission''' return self.mav.mav.mission_item_int_encode( target_system, target_component, 1, # seq mavutil.mavlink.MAV_FRAME_GLOBAL_RELATIVE_ALT_INT, mavutil.mavlink.MAV_CMD_NAV_TAKEOFF, 0, # current 0, # autocontinue 0, # p1 0, # p2 0, # p3 0, # p4 int(1.0000 * 1e7), # latitude int(1.0000 * 1e7), # longitude 31.0000, # altitude mavutil.mavlink.MAV_MISSION_TYPE_MISSION) def mission_item_rtl(self, target_system, target_component): '''returns a mission_item_int which can be used as takeoff in a mission''' return self.mav.mav.mission_item_int_encode( target_system, target_component, 1, # seq mavutil.mavlink.MAV_FRAME_GLOBAL, mavutil.mavlink.MAV_CMD_NAV_RETURN_TO_LAUNCH, 0, # current 0, # autocontinue 0, # p1 0, # p2 0, # p3 0, # p4 0, # latitude 0, # longitude 0.0000, # altitude mavutil.mavlink.MAV_MISSION_TYPE_MISSION) def scurve_nasty_mission(self, target_system=1, target_component=1): '''returns a mission which attempts to give the SCurve library indigestion. The same destination is given several times.''' wp2_loc = self.mav.location() wp2_offset_n = 20 wp2_offset_e = 30 self.location_offset_ne(wp2_loc, wp2_offset_n, wp2_offset_e) wp2_by_three = self.mav.mav.mission_item_int_encode( target_system, target_component, 2, # seq mavutil.mavlink.MAV_FRAME_GLOBAL_RELATIVE_ALT_INT, mavutil.mavlink.MAV_CMD_NAV_WAYPOINT, 0, # current 0, # autocontinue 3, # p1 0, # p2 0, # p3 0, # p4 int(wp2_loc.lat * 1e7), # latitude int(wp2_loc.lng * 1e7), # longitude 31.0000, # altitude mavutil.mavlink.MAV_MISSION_TYPE_MISSION) wp5_loc = self.mav.location() wp5_offset_n = -20 wp5_offset_e = 30 self.location_offset_ne(wp5_loc, wp5_offset_n, wp5_offset_e) wp5_by_three = self.mav.mav.mission_item_int_encode( target_system, target_component, 5, # seq mavutil.mavlink.MAV_FRAME_GLOBAL_RELATIVE_ALT_INT, mavutil.mavlink.MAV_CMD_NAV_SPLINE_WAYPOINT, 0, # current 0, # autocontinue 3, # p1 0, # p2 0, # p3 0, # p4 int(wp5_loc.lat * 1e7), # latitude int(wp5_loc.lng * 1e7), # longitude 31.0000, # altitude mavutil.mavlink.MAV_MISSION_TYPE_MISSION) ret = copy.copy([ # slot 0 is home self.mission_item_home(target_system=target_system, target_component=target_component), # slot 1 is takeoff self.mission_item_takeoff(target_system=target_system, target_component=target_component), # now three spline waypoints right on top of one another: copy.copy(wp2_by_three), copy.copy(wp2_by_three), copy.copy(wp2_by_three), # now three MORE spline waypoints right on top of one another somewhere else: copy.copy(wp5_by_three), copy.copy(wp5_by_three), copy.copy(wp5_by_three), self.mission_item_rtl(target_system=target_system, target_component=target_component), ]) # renumber the items: count = 0 for item in ret: item.seq = count count += 1 return ret def scurve_nasty_up_mission(self, target_system=1, target_component=1): '''returns a mission which attempts to give the SCurve library indigestion. The same destination is given several times but with differing altitudes.''' wp2_loc = self.mav.location() wp2_offset_n = 20 wp2_offset_e = 30 self.location_offset_ne(wp2_loc, wp2_offset_n, wp2_offset_e) wp2 = self.mav.mav.mission_item_int_encode( target_system, target_component, 2, # seq mavutil.mavlink.MAV_FRAME_GLOBAL_RELATIVE_ALT_INT, mavutil.mavlink.MAV_CMD_NAV_WAYPOINT, 0, # current 0, # autocontinue 3, # p1 0, # p2 0, # p3 0, # p4 int(wp2_loc.lat * 1e7), # latitude int(wp2_loc.lng * 1e7), # longitude 31.0000, # altitude mavutil.mavlink.MAV_MISSION_TYPE_MISSION) wp3 = copy.copy(wp2) wp3.alt = 40 wp4 = copy.copy(wp2) wp4.alt = 31 wp5_loc = self.mav.location() wp5_offset_n = -20 wp5_offset_e = 30 self.location_offset_ne(wp5_loc, wp5_offset_n, wp5_offset_e) wp5 = self.mav.mav.mission_item_int_encode( target_system, target_component, 5, # seq mavutil.mavlink.MAV_FRAME_GLOBAL_RELATIVE_ALT_INT, mavutil.mavlink.MAV_CMD_NAV_SPLINE_WAYPOINT, 0, # current 0, # autocontinue 3, # p1 0, # p2 0, # p3 0, # p4 int(wp5_loc.lat * 1e7), # latitude int(wp5_loc.lng * 1e7), # longitude 31.0000, # altitude mavutil.mavlink.MAV_MISSION_TYPE_MISSION) wp6 = copy.copy(wp5) wp6.alt = 41 wp7 = copy.copy(wp5) wp7.alt = 51 ret = copy.copy([ # slot 0 is home self.mission_item_home(target_system=target_system, target_component=target_component), # slot 1 is takeoff self.mission_item_takeoff(target_system=target_system, target_component=target_component), wp2, wp3, wp4, # now three MORE spline waypoints right on top of one another somewhere else: wp5, wp6, wp7, self.mission_item_rtl(target_system=target_system, target_component=target_component), ]) # renumber the items: count = 0 for item in ret: item.seq = count count += 1 return ret def fly_mission_points(self, points): '''takes a list of waypoints and flies them, expecting a disarm at end''' self.check_mission_upload_download(points) self.set_parameter("AUTO_OPTIONS", 3) self.change_mode('AUTO') self.set_rc(8, 1000) self.wait_ready_to_arm() self.arm_vehicle() self.progress("Raising rotor speed") self.set_rc(8, 2000) self.wait_waypoint(0, len(points)-1) self.wait_disarmed() self.set_rc(8, 1000) def NastyMission(self): '''constructs and runs missions designed to test scurves''' self.fly_mission_points(self.scurve_nasty_mission()) # hopefully we don't need this step forever: self.progress("Restting mission state machine by changing into LOITER") self.change_mode('LOITER') self.fly_mission_points(self.scurve_nasty_up_mission()) def set_rc_default(self): super(AutoTestHelicopter, self).set_rc_default() self.progress("Lowering rotor speed") self.set_rc(8, 1000) def fly_mission(self, filename, strict=True): num_wp = self.load_mission(filename, strict=strict) self.change_mode("LOITER") self.wait_ready_to_arm() self.arm_vehicle() self.set_rc(8, 2000) # Raise rotor speed self.delay_sim_time(20) self.change_mode("AUTO") self.set_rc(3, 1500) self.wait_waypoint(1, num_wp-1) self.wait_disarmed() self.set_rc(8, 1000) # Lower rotor speed # FIXME move this & plane's version to common def AirspeedDrivers(self, timeout=600): '''Test AirSpeed drivers''' # set the start location to CMAC to use same test script as other vehicles self.sitl_start_loc = mavutil.location(-35.362881, 149.165222, 582.000000, 90.0) # CMAC self.customise_SITL_commandline(["--home", "%s,%s,%s,%s" % (-35.362881, 149.165222, 582.000000, 90.0)]) # insert listener to compare airspeeds: airspeed = [None, None] def check_airspeeds(mav, m): m_type = m.get_type() if (m_type == 'NAMED_VALUE_FLOAT' and m.name == 'AS2'): airspeed[1] = m.value elif m_type == 'VFR_HUD': airspeed[0] = m.airspeed else: return if airspeed[0] is None or airspeed[1] is None: return delta = abs(airspeed[0] - airspeed[1]) if delta > 3: raise NotAchievedException("Airspeed mismatch (as1=%f as2=%f)" % (airspeed[0], airspeed[1])) # Copter's airspeed sensors are off by default self.set_parameter("ARSPD_ENABLE", 1) self.set_parameter("ARSPD_TYPE", 2) # Analog airspeed driver self.set_parameter("ARSPD_PIN", 1) # Analog airspeed driver pin for SITL self.reboot_sitl() airspeed_sensors = [ ("MS5525", 3, 1), ("DLVR", 7, 2), ] for (name, t, bus) in airspeed_sensors: self.context_push() if bus is not None: self.set_parameter("ARSPD2_BUS", bus) self.set_parameter("ARSPD2_TYPE", t) self.reboot_sitl() self.wait_ready_to_arm() self.arm_vehicle() self.install_message_hook_context(check_airspeeds) self.fly_mission("ap1.txt", strict=False) if airspeed[0] is None: raise NotAchievedException("Never saw an airspeed1") if airspeed[1] is None: raise NotAchievedException("Never saw an airspeed2") self.context_pop() if not self.current_onboard_log_contains_message("ARSP"): raise NotAchievedException("Expected ARSP log message") self.reboot_sitl() def TurbineStart(self, timeout=200): """Check Turbine Start Feature""" RAMP_TIME = 4 # set option for Turbine Start self.set_parameter("RC6_OPTION", 161) self.set_parameter("H_RSC_RAMP_TIME", RAMP_TIME) self.set_parameter("H_RSC_SETPOINT", 66) self.set_parameter("DISARM_DELAY", 0) self.set_rc(3, 1000) self.set_rc(8, 1000) # check that turbine start doesn't activate while disarmed self.progress("Checking Turbine Start doesn't activate while disarmed") self.set_rc(6, 2000) tstart = self.get_sim_time() while self.get_sim_time() - tstart < 2: servo = self.mav.recv_match(type='SERVO_OUTPUT_RAW', blocking=True) if servo.servo8_raw > 1050: raise NotAchievedException("Turbine Start activated while disarmed") self.set_rc(6, 1000) # check that turbine start doesn't activate armed with interlock enabled self.progress("Checking Turbine Start doesn't activate while armed with interlock enabled") self.wait_ready_to_arm() self.arm_vehicle() self.set_rc(8, 2000) self.set_rc(6, 2000) tstart = self.get_sim_time() while self.get_sim_time() - tstart < 5: servo = self.mav.recv_match(type='SERVO_OUTPUT_RAW', blocking=True) if servo.servo8_raw > 1660: raise NotAchievedException("Turbine Start activated with interlock enabled") self.set_rc(8, 1000) self.set_rc(6, 1000) self.disarm_vehicle() # check that turbine start activates as designed (armed with interlock disabled) self.progress("Checking Turbine Start activates as designed (armed with interlock disabled)") self.delay_sim_time(2) self.arm_vehicle() self.set_rc(6, 2000) tstart = self.get_sim_time() while True: if self.get_sim_time() - tstart > 5: raise AutoTestTimeoutException("Turbine Start did not activate") servo = self.mav.recv_match(type='SERVO_OUTPUT_RAW', blocking=True) if servo.servo8_raw > 1800: break self.wait_servo_channel_value(8, 1000, timeout=3) self.set_rc(6, 1000) # check that turbine start will not reactivate after interlock enabled self.progress("Checking Turbine Start doesn't activate once interlock is enabled after start)") self.set_rc(8, 2000) self.set_rc(6, 2000) tstart = self.get_sim_time() while self.get_sim_time() - tstart < 5: servo = self.mav.recv_match(type='SERVO_OUTPUT_RAW', blocking=True) if servo.servo8_raw > 1660: raise NotAchievedException("Turbine Start activated with interlock enabled") self.set_rc(6, 1000) self.set_rc(8, 1000) self.disarm_vehicle() def tests(self): '''return list of all tests''' ret = AutoTest.tests(self) ret.extend([ self.AVCMission, self.RotorRunup, self.PosHoldTakeOff, self.StabilizeTakeOff, self.SplineWaypoint, self.AutoRotation, self.ManAutoRotation, self.governortest, self.FlyEachFrame, self.AirspeedDrivers, self.TurbineStart, self.NastyMission, ]) return ret def disabled_tests(self): return { }