/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*- #include "Copter.h" /* * control_althold.pde - init and run calls for althold, flight mode */ // althold_init - initialise althold controller bool Copter::althold_init(bool ignore_checks) { // initialize vertical speeds and leash lengths pos_control.set_speed_z(-g.pilot_velocity_z_max, g.pilot_velocity_z_max); pos_control.set_accel_z(g.pilot_accel_z); // initialise altitude target to stopping point pos_control.set_target_to_stopping_point_z(); // stop takeoff if running takeoff_stop(); return true; } // althold_run - runs the althold controller // should be called at 100hz or more void Copter::althold_run() { AltHoldModeState althold_state; float takeoff_climb_rate = 0.0f; // apply SIMPLE mode transform to pilot inputs update_simple_mode(); // get pilot desired lean angles float target_roll, target_pitch; get_pilot_desired_lean_angles(channel_roll->control_in, channel_pitch->control_in, target_roll, target_pitch); // get pilot's desired yaw rate float target_yaw_rate = get_pilot_desired_yaw_rate(channel_yaw->control_in); // get pilot desired climb rate float target_climb_rate = get_pilot_desired_climb_rate(channel_throttle->control_in); target_climb_rate = constrain_float(target_climb_rate, -g.pilot_velocity_z_max, g.pilot_velocity_z_max); // Alt Hold State Machine Determination if(!ap.auto_armed || !motors.get_interlock()) { althold_state = AltHold_Disarmed; } else if (takeoff_state.running || (ap.land_complete && (channel_throttle->control_in > get_takeoff_trigger_throttle()))){ althold_state = AltHold_Takeoff; } else if (ap.land_complete){ althold_state = AltHold_Landed; } else { althold_state = AltHold_Flying; } // Alt Hold State Machine switch (althold_state) { case AltHold_Disarmed: #if FRAME_CONFIG == HELI_FRAME // Helicopters always stabilize roll/pitch/yaw // call attitude controller attitude_control.angle_ef_roll_pitch_rate_ef_yaw_smooth(target_roll, target_pitch, target_yaw_rate, get_smoothing_gain()); attitude_control.set_throttle_out(0,false,g.throttle_filt); #else // Multirotors do not stabilize roll/pitch/yaw when disarmed attitude_control.set_throttle_out_unstabilized(0,true,g.throttle_filt); #endif // HELI_FRAME pos_control.relax_alt_hold_controllers(get_throttle_pre_takeoff(channel_throttle->control_in)-throttle_average); break; case AltHold_Takeoff: // initiate take-off if (!takeoff_state.running) { takeoff_timer_start(constrain_float(g.pilot_takeoff_alt,0.0f,1000.0f)); // indicate we are taking off set_land_complete(false); // clear i terms set_throttle_takeoff(); } // get take-off adjusted pilot and takeoff climb rates takeoff_get_climb_rates(target_climb_rate, takeoff_climb_rate); // call attitude controller attitude_control.angle_ef_roll_pitch_rate_ef_yaw_smooth(target_roll, target_pitch, target_yaw_rate, get_smoothing_gain()); // call position controller pos_control.set_alt_target_from_climb_rate(target_climb_rate, G_Dt, false); pos_control.add_takeoff_climb_rate(takeoff_climb_rate, G_Dt); pos_control.update_z_controller(); break; case AltHold_Landed: #if FRAME_CONFIG == HELI_FRAME // Helicopters always stabilize roll/pitch/yaw // call attitude controller attitude_control.angle_ef_roll_pitch_rate_ef_yaw_smooth(target_roll, target_pitch, target_yaw_rate, get_smoothing_gain()); attitude_control.set_throttle_out(get_throttle_pre_takeoff(channel_throttle->control_in),false,g.throttle_filt); #else // Multirotors do not stabilize roll/pitch/yaw when disarmed attitude_control.set_throttle_out_unstabilized(get_throttle_pre_takeoff(channel_throttle->control_in),true,g.throttle_filt); #endif pos_control.relax_alt_hold_controllers(get_throttle_pre_takeoff(channel_throttle->control_in)-throttle_average); break; case AltHold_Flying: // call attitude controller attitude_control.angle_ef_roll_pitch_rate_ef_yaw_smooth(target_roll, target_pitch, target_yaw_rate, get_smoothing_gain()); // call throttle controller if (sonar_enabled && (sonar_alt_health >= SONAR_ALT_HEALTH_MAX)) { // if sonar is ok, use surface tracking target_climb_rate = get_surface_tracking_climb_rate(target_climb_rate, pos_control.get_alt_target(), G_Dt); } // call position controller pos_control.set_alt_target_from_climb_rate(target_climb_rate, G_Dt, false); pos_control.update_z_controller(); break; } }