// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*- /* * This event will be called when the failsafe changes * boolean failsafe reflects the current state */ static void failsafe_radio_on_event() { // if motors are not armed there is nothing to do if( !motors.armed() ) { return; } // This is how to handle a failsafe. switch(control_mode) { case STABILIZE: case ACRO: case SPORT: // if throttle is zero disarm motors if (g.rc_3.control_in == 0) { init_disarm_motors(); }else if(g.failsafe_throttle == FS_THR_ENABLED_ALWAYS_LAND) { // if failsafe_throttle is 3 (i.e. FS_THR_ENABLED_ALWAYS_LAND) land immediately set_mode_land_with_pause(); }else if(home_distance > wp_nav.get_wp_radius()) { if (!set_mode(RTL)) { set_mode_land_with_pause(); } }else{ // We have no GPS or are very close to home so we will land set_mode_land_with_pause(); } break; case AUTO: // failsafe_throttle is 1 do RTL, 2 means continue with the mission if (g.failsafe_throttle == FS_THR_ENABLED_ALWAYS_RTL) { if(home_distance > wp_nav.get_wp_radius()) { if (!set_mode(RTL)) { set_mode_land_with_pause(); } }else{ // We are very close to home so we will land set_mode_land_with_pause(); } }else if(g.failsafe_throttle == FS_THR_ENABLED_ALWAYS_LAND) { // if failsafe_throttle is 3 (i.e. FS_THR_ENABLED_ALWAYS_LAND) land immediately set_mode_land_with_pause(); } // if failsafe_throttle is 2 (i.e. FS_THR_ENABLED_CONTINUE_MISSION) no need to do anything break; case LOITER: case ALT_HOLD: case POSHOLD: // if landed with throttle at zero disarm, otherwise do the regular thing if (g.rc_3.control_in == 0 && ap.land_complete) { init_disarm_motors(); }else if(g.failsafe_throttle == FS_THR_ENABLED_ALWAYS_LAND) { // if failsafe_throttle is 3 (i.e. FS_THR_ENABLED_ALWAYS_LAND) land immediately set_mode_land_with_pause(); }else if(home_distance > wp_nav.get_wp_radius()) { if (!set_mode(RTL)) { set_mode_land_with_pause(); } }else{ // We have no GPS or are very close to home so we will land set_mode_land_with_pause(); } break; case LAND: // continue to land if battery failsafe is also active otherwise fall through to default handling if (g.failsafe_battery_enabled == FS_BATT_LAND && failsafe.battery) { break; } default: if(g.failsafe_throttle == FS_THR_ENABLED_ALWAYS_LAND) { // if failsafe_throttle is 3 (i.e. FS_THR_ENABLED_ALWAYS_LAND) land immediately set_mode_land_with_pause(); }else if(home_distance > wp_nav.get_wp_radius()) { if (!set_mode(RTL)){ set_mode_land_with_pause(); } }else{ // We have no GPS or are very close to home so we will land set_mode_land_with_pause(); } break; } // log the error to the dataflash Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_RADIO, ERROR_CODE_FAILSAFE_OCCURRED); } // failsafe_off_event - respond to radio contact being regained // we must be in AUTO, LAND or RTL modes // or Stabilize or ACRO mode but with motors disarmed static void failsafe_radio_off_event() { // no need to do anything except log the error as resolved // user can now override roll, pitch, yaw and throttle and even use flight mode switch to restore previous flight mode Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_RADIO, ERROR_CODE_FAILSAFE_RESOLVED); } static void failsafe_battery_event(void) { // return immediately if low battery event has already been triggered if (failsafe.battery) { return; } // failsafe check if (g.failsafe_battery_enabled != FS_BATT_DISABLED && motors.armed()) { switch(control_mode) { case STABILIZE: case ACRO: case SPORT: // if throttle is zero disarm motors if (g.rc_3.control_in == 0) { init_disarm_motors(); }else{ // set mode to RTL or LAND if (g.failsafe_battery_enabled == FS_BATT_RTL && home_distance > wp_nav.get_wp_radius()) { if (!set_mode(RTL)) { set_mode_land_with_pause(); } }else{ set_mode_land_with_pause(); } } break; case AUTO: // set mode to RTL or LAND if (home_distance > wp_nav.get_wp_radius()) { if (!set_mode(RTL)) { set_mode_land_with_pause(); } }else{ set_mode_land_with_pause(); } break; case LOITER: case ALT_HOLD: case POSHOLD: // if landed with throttle at zero disarm, otherwise fall through to default handling if (g.rc_3.control_in == 0 && ap.land_complete) { init_disarm_motors(); break; } default: // set mode to RTL or LAND if (g.failsafe_battery_enabled == FS_BATT_RTL && home_distance > wp_nav.get_wp_radius()) { if (!set_mode(RTL)) { set_mode_land_with_pause(); } }else{ set_mode_land_with_pause(); } break; } } // set the low battery flag set_failsafe_battery(true); // warn the ground station and log to dataflash gcs_send_text_P(SEVERITY_LOW,PSTR("Low Battery!")); Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_BATT, ERROR_CODE_FAILSAFE_OCCURRED); } // failsafe_gps_check - check for gps failsafe static void failsafe_gps_check() { uint32_t last_gps_update_ms; // return immediately if gps failsafe is disabled or we have never had GPS lock if (g.failsafe_gps_enabled == FS_GPS_DISABLED || !ap.home_is_set) { // if we have just disabled the gps failsafe, ensure the gps failsafe event is cleared if (failsafe.gps) { failsafe_gps_off_event(); set_failsafe_gps(false); } return; } // calc time since last gps update last_gps_update_ms = millis() - gps_glitch.last_good_update(); // check if all is well if( last_gps_update_ms < FAILSAFE_GPS_TIMEOUT_MS) { // check for recovery from gps failsafe if( failsafe.gps ) { failsafe_gps_off_event(); set_failsafe_gps(false); } return; } // do nothing if gps failsafe already triggered or motors disarmed if( failsafe.gps || !motors.armed()) { return; } // GPS failsafe event has occured // update state, warn the ground station and log to dataflash set_failsafe_gps(true); gcs_send_text_P(SEVERITY_LOW,PSTR("Lost GPS!")); Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_GPS, ERROR_CODE_FAILSAFE_OCCURRED); // take action based on flight mode and FS_GPS_ENABLED parameter if (mode_requires_GPS(control_mode) || g.failsafe_gps_enabled == FS_GPS_LAND_EVEN_STABILIZE) { if (g.failsafe_gps_enabled == FS_GPS_ALTHOLD && !failsafe.radio) { set_mode(ALT_HOLD); }else{ set_mode_land_with_pause(); } } // if flight mode is LAND ensure it's not the GPS controlled LAND if (control_mode == LAND) { land_do_not_use_GPS(); } } // failsafe_gps_off_event - actions to take when GPS contact is restored static void failsafe_gps_off_event(void) { // log recovery of GPS in logs? Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_GPS, ERROR_CODE_FAILSAFE_RESOLVED); } // failsafe_gcs_check - check for ground station failsafe static void failsafe_gcs_check() { uint32_t last_gcs_update_ms; // return immediately if gcs failsafe is disabled, gcs has never been connected or we are not overriding rc controls from the gcs if( g.failsafe_gcs == FS_GCS_DISABLED || failsafe.last_heartbeat_ms == 0 || !failsafe.rc_override_active) { return; } // calc time since last gcs update last_gcs_update_ms = millis() - failsafe.last_heartbeat_ms; // check if all is well if( last_gcs_update_ms < FS_GCS_TIMEOUT_MS) { // check for recovery from gcs failsafe if (failsafe.gcs) { failsafe_gcs_off_event(); set_failsafe_gcs(false); } return; } // do nothing if gcs failsafe already triggered or motors disarmed if( failsafe.gcs || !motors.armed()) { return; } // GCS failsafe event has occured // update state, log to dataflash set_failsafe_gcs(true); Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_GCS, ERROR_CODE_FAILSAFE_OCCURRED); // clear overrides so that RC control can be regained with radio. hal.rcin->clear_overrides(); failsafe.rc_override_active = false; // This is how to handle a failsafe. // use the throttle failsafe setting to decide what to do switch(control_mode) { case STABILIZE: case ACRO: case SPORT: // if throttle is zero disarm motors if (g.rc_3.control_in == 0) { init_disarm_motors(); }else if(home_distance > wp_nav.get_wp_radius()) { if (!set_mode(RTL)) { set_mode_land_with_pause(); } }else{ // We have no GPS or are very close to home so we will land set_mode_land_with_pause(); } break; case AUTO: // if g.failsafe_gcs is 1 do RTL, 2 means continue with the mission if (g.failsafe_gcs == FS_GCS_ENABLED_ALWAYS_RTL) { if (home_distance > wp_nav.get_wp_radius()) { if (!set_mode(RTL)) { set_mode_land_with_pause(); } }else{ // We are very close to home so we will land set_mode_land_with_pause(); } } // if failsafe_throttle is 2 (i.e. FS_THR_ENABLED_CONTINUE_MISSION) no need to do anything break; default: if(home_distance > wp_nav.get_wp_radius()) { if (!set_mode(RTL)) { set_mode_land_with_pause(); } }else{ // We have no GPS or are very close to home so we will land set_mode_land_with_pause(); } break; } } // failsafe_gcs_off_event - actions to take when GCS contact is restored static void failsafe_gcs_off_event(void) { // log recovery of GCS in logs? Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_GCS, ERROR_CODE_FAILSAFE_RESOLVED); } static void update_events() { ServoRelayEvents.update_events(); }