// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: t -*- /// @file AP_TECS.h /// @brief Combined Total Energy Speed & Height Control. This is a instance of an /// AP_SpdHgtControl class /* * Written by Paul Riseborough 2013 to provide: * - Combined control of speed and height using throttle to control * total energy and pitch angle to control exchange of energy between * potential and kinetic. * Selectable speed or height priority modes when calculating pitch angle * - Fallback mode when no airspeed measurement is available that * sets throttle based on height rate demand and switches pitch angle control to * height priority * - Underspeed protection that demands maximum throttle switches pitch angle control * to speed priority mode * - Relative ease of tuning through use of intuitive time constant, trim rate and damping parameters and the use * of easy to measure aircraft performance data */ #ifndef AP_TECS_H #define AP_TECS_H #include #include #include #include #include #include class AP_TECS : public AP_SpdHgtControl { public: AP_TECS(AP_AHRS &ahrs, const AP_Vehicle::FixedWing &parms) : _ahrs(ahrs), aparm(parms) { AP_Param::setup_object_defaults(this, var_info); } // Update of the estimated height and height rate internal state // Update of the inertial speed rate internal state // Should be called at 50Hz or greater // hgt_afe is the height above field elevation (takeoff height) void update_50hz(float hgt_afe); // Update the control loop calculations void update_pitch_throttle(int32_t hgt_dem_cm, int32_t EAS_dem_cm, enum FlightStage flight_stage, int32_t ptchMinCO_cd, int16_t throttle_nudge, float hgt_afe, float load_factor); // demanded throttle in percentage // should return 0 to 100 int32_t get_throttle_demand(void) {return int32_t(_throttle_dem * 100.0f);} // demanded pitch angle in centi-degrees // should return between -9000 to +9000 int32_t get_pitch_demand(void) { return int32_t(_pitch_dem * 5729.5781f);} // Rate of change of velocity along X body axis in m/s^2 float get_VXdot(void) { return _vel_dot; } // log data on internal state of the controller. Called at 10Hz void log_data(DataFlash_Class &dataflash, uint8_t msgid); // return current target airspeed float get_target_airspeed(void) const { return _TAS_dem / _ahrs.get_EAS2TAS(); } // return maximum climb rate float get_max_climbrate(void) const { return _maxClimbRate; } // return landing sink rate float get_land_sinkrate(void) const { return _land_sink; } // this supports the TECS_* user settable parameters static const struct AP_Param::GroupInfo var_info[]; struct PACKED log_TECS_Tuning { LOG_PACKET_HEADER; uint32_t time_ms; float hgt; float dhgt; float hgt_dem; float dhgt_dem; float spd_dem; float spd; float dspd; float ithr; float iptch; float thr; float ptch; float dspd_dem; } log_tuning; private: // Last time update_50Hz was called uint32_t _update_50hz_last_usec; // Last time update_speed was called uint32_t _update_speed_last_usec; // Last time update_pitch_throttle was called uint32_t _update_pitch_throttle_last_usec; // reference to the AHRS object AP_AHRS &_ahrs; const AP_Vehicle::FixedWing &aparm; // TECS tuning parameters AP_Float _hgtCompFiltOmega; AP_Float _spdCompFiltOmega; AP_Float _maxClimbRate; AP_Float _minSinkRate; AP_Float _maxSinkRate; AP_Float _timeConst; AP_Float _landTimeConst; AP_Float _ptchDamp; AP_Float _landDamp; AP_Float _thrDamp; AP_Float _integGain; AP_Float _vertAccLim; AP_Float _rollComp; AP_Float _spdWeight; AP_Float _spdWeightLand; AP_Float _landThrottle; AP_Float _landAirspeed; AP_Float _land_sink; AP_Int8 _pitch_max; AP_Int8 _pitch_min; // throttle demand in the range from 0.0 to 1.0 float _throttle_dem; // pitch angle demand in radians float _pitch_dem; // Integrator state 1 - height filter second derivative float _integ1_state; // Integrator state 2 - height rate float _climb_rate; // Integrator state 3 - height float _integ3_state; // Integrator state 4 - airspeed filter first derivative float _integ4_state; // Integrator state 5 - true airspeed float _integ5_state; // Integrator state 6 - throttle integrator float _integ6_state; // Integrator state 6 - pitch integrator float _integ7_state; // throttle demand rate limiter state float _last_throttle_dem; // pitch demand rate limiter state float _last_pitch_dem; // Rate of change of speed along X axis float _vel_dot; // Equivalent airspeed float _EAS; // True airspeed limits float _TASmax; float _TASmin; // Current and last true airspeed demand float _TAS_dem; float _TAS_dem_last; // Equivalent airspeed demand float _EAS_dem; // height demands float _hgt_dem; float _hgt_dem_in_old; float _hgt_dem_adj; float _hgt_dem_adj_last; float _hgt_rate_dem; float _hgt_dem_prev; float _land_hgt_dem; // Speed demand after application of rate limiting // This is the demand tracked by the TECS control loops float _TAS_dem_adj; // Speed rate demand after application of rate limiting // This is the demand tracked by the TECS control loops float _TAS_rate_dem; // Total energy rate filter state float _STEdotErrLast; // Underspeed condition bool _underspeed; // Bad descent condition caused by unachievable airspeed demand bool _badDescent; // climbout mode enum FlightStage _flight_stage; // pitch demand before limiting float _pitch_dem_unc; // Maximum and minimum specific total energy rate limits float _STEdot_max; float _STEdot_min; // Maximum and minimum floating point throttle limits float _THRmaxf; float _THRminf; // Maximum and minimum floating point pitch limits float _PITCHmaxf; float _PITCHminf; // Specific energy quantities float _SPE_dem; float _SKE_dem; float _SPEdot_dem; float _SKEdot_dem; float _SPE_est; float _SKE_est; float _SPEdot; float _SKEdot; // Specific energy error quantities float _STE_error; // Time since last update of main TECS loop (seconds) float _DT; // counter for demanded sink rate on land final uint8_t _flare_counter; // Update the airspeed internal state using a second order complementary filter void _update_speed(float load_factor); // Update the demanded airspeed void _update_speed_demand(void); // Update the demanded height void _update_height_demand(void); // Detect an underspeed condition void _detect_underspeed(void); // Update Specific Energy Quantities void _update_energies(void); // Update Demanded Throttle void _update_throttle(void); // Update Demanded Throttle Non-Airspeed void _update_throttle_option(int16_t throttle_nudge); // Detect Bad Descent void _detect_bad_descent(void); // Update Demanded Pitch Angle void _update_pitch(void); // Initialise states and variables void _initialise_states(int32_t ptchMinCO_cd, float hgt_afe); // Calculate specific total energy rate limits void _update_STE_rate_lim(void); // declares a 5point average filter using floats AverageFilterFloat_Size5 _vdot_filter; // current time constant float timeConstant(void) const; }; #define TECS_LOG_FORMAT(msg) { msg, sizeof(AP_TECS::log_TECS_Tuning), \ "TECS", "Iffffffffffff", "TimeMS,h,dh,h_dem,dh_dem,sp_dem,sp,dsp,ith,iph,th,ph,dsp_dem" } #endif //AP_TECS_H