#include "AP_Logger_Backend.h" #include "LoggerMessageWriter.h" #include extern const AP_HAL::HAL& hal; AP_Logger_Backend::AP_Logger_Backend(AP_Logger &front, class LoggerMessageWriter_DFLogStart *writer) : _front(front), _startup_messagewriter(writer) { writer->set_logger_backend(this); } uint8_t AP_Logger_Backend::num_types() const { return _front._num_types; } const struct LogStructure *AP_Logger_Backend::structure(uint8_t num) const { return _front.structure(num); } uint8_t AP_Logger_Backend::num_units() const { return _front._num_units; } const struct UnitStructure *AP_Logger_Backend::unit(uint8_t num) const { return _front.unit(num); } uint8_t AP_Logger_Backend::num_multipliers() const { return _front._num_multipliers; } const struct MultiplierStructure *AP_Logger_Backend::multiplier(uint8_t num) const { return _front.multiplier(num); } AP_Logger_Backend::vehicle_startup_message_Writer AP_Logger_Backend::vehicle_message_writer() { return _front._vehicle_messages; } void AP_Logger_Backend::periodic_10Hz(const uint32_t now) { } void AP_Logger_Backend::periodic_1Hz() { } void AP_Logger_Backend::periodic_fullrate() { } void AP_Logger_Backend::periodic_tasks() { uint32_t now = AP_HAL::millis(); if (now - _last_periodic_1Hz > 1000) { periodic_1Hz(); _last_periodic_1Hz = now; } if (now - _last_periodic_10Hz > 100) { periodic_10Hz(now); _last_periodic_10Hz = now; } periodic_fullrate(); } void AP_Logger_Backend::start_new_log_reset_variables() { _startup_messagewriter->reset(); _front.backend_starting_new_log(this); } // this method can be overridden to do extra things with your buffer. // for example, in AP_Logger_MAVLink we may push messages into the UART. void AP_Logger_Backend::push_log_blocks() { WriteMoreStartupMessages(); } // returns true if all format messages have been written, and thus it is OK // for other messages to go out to the log bool AP_Logger_Backend::WriteBlockCheckStartupMessages() { #if APM_BUILD_TYPE(APM_BUILD_Replay) return true; #endif if (_startup_messagewriter->fmt_done()) { return true; } if (_writing_startup_messages) { // we have been called by a messagewriter, so writing is OK return true; } if (!_startup_messagewriter->finished() && !hal.scheduler->in_main_thread()) { // only the main thread may write startup messages out return false; } // we're not writing startup messages, so this must be some random // caller hoping to write blocks out. Push out log blocks - we // might end up clearing the buffer..... push_log_blocks(); // even if we did finish writing startup messages, we can't // permit any message to go in as its timestamp will be before // any we wrote in. Time going backwards annoys log readers. // sorry! currently busy writing out startup messages... return false; } // source more messages from the startup message writer: void AP_Logger_Backend::WriteMoreStartupMessages() { if (_startup_messagewriter->finished()) { return; } _writing_startup_messages = true; _startup_messagewriter->process(); _writing_startup_messages = false; } /* * support for Write(): */ bool AP_Logger_Backend::Write_Emit_FMT(uint8_t msg_type) { // get log structure from front end: char ls_name[LS_NAME_SIZE] = {}; char ls_format[LS_FORMAT_SIZE] = {}; char ls_labels[LS_LABELS_SIZE] = {}; char ls_units[LS_UNITS_SIZE] = {}; char ls_multipliers[LS_MULTIPLIERS_SIZE] = {}; struct LogStructure logstruct = { // these will be overwritten, but need to keep the compiler happy: 0, 0, ls_name, ls_format, ls_labels, ls_units, ls_multipliers }; if (!_front.fill_log_write_logstructure(logstruct, msg_type)) { // this is a bug; we've been asked to write out the FMT // message for a msg_type, but the frontend can't supply the // required information AP::internalerror().error(AP_InternalError::error_t::logger_missing_logstructure); return false; } if (!Write_Format(&logstruct)) { return false; } if (!Write_Format_Units(&logstruct)) { return false; } return true; } bool AP_Logger_Backend::Write(const uint8_t msg_type, va_list arg_list, bool is_critical) { // stack-allocate a buffer so we can WriteBlock(); this could be // 255 bytes! If we were willing to lose the WriteBlock // abstraction we could do WriteBytes() here instead? const char *fmt = nullptr; uint8_t msg_len; AP_Logger::log_write_fmt *f; for (f = _front.log_write_fmts; f; f=f->next) { if (f->msg_type == msg_type) { fmt = f->fmt; msg_len = f->msg_len; break; } } if (fmt == nullptr) { AP::internalerror().error(AP_InternalError::error_t::logger_logwrite_missingfmt); return false; } if (bufferspace_available() < msg_len) { return false; } uint8_t buffer[msg_len]; uint8_t offset = 0; buffer[offset++] = HEAD_BYTE1; buffer[offset++] = HEAD_BYTE2; buffer[offset++] = msg_type; for (uint8_t i=0; iin_main_thread()) { return false; } return true; } #if CONFIG_HAL_BOARD == HAL_BOARD_SITL void AP_Logger_Backend::validate_WritePrioritisedBlock(const void *pBuffer, uint16_t size) { // just check the first few packets to avoid too much overhead // (finding the structures is expensive) static uint16_t count = 0; if (count > 65534) { return; } count++; // we assume here that we ever WritePrioritisedBlock for a single // message. If this assumption becomes false we can't do these // checks. if (size < 3) { AP_HAL::panic("Short prioritised block"); } if (((uint8_t*)pBuffer)[0] != HEAD_BYTE1 || ((uint8_t*)pBuffer)[1] != HEAD_BYTE2) { AP_HAL::panic("Not passed a message"); } const uint8_t type = ((uint8_t*)pBuffer)[2]; uint8_t type_len; const struct LogStructure *s = _front.structure_for_msg_type(type); if (s == nullptr) { const struct AP_Logger::log_write_fmt *t = _front.log_write_fmt_for_msg_type(type); if (t == nullptr) { AP_HAL::panic("No structure for msg_type=%u", type); } type_len = t->msg_len; } else { type_len = s->msg_len; } if (type_len != size) { char name[5] = {}; // get a null-terminated string memcpy(name, s->name, 4); AP_HAL::panic("Size mismatch for %u (%s) (expected=%u got=%u)\n", type, name, type_len, size); } } #endif bool AP_Logger_Backend::WritePrioritisedBlock(const void *pBuffer, uint16_t size, bool is_critical) { #if CONFIG_HAL_BOARD == HAL_BOARD_SITL validate_WritePrioritisedBlock(pBuffer, size); #endif if (!ShouldLog(is_critical)) { return false; } if (StartNewLogOK()) { start_new_log(); } if (!WritesOK()) { return false; } return _WritePrioritisedBlock(pBuffer, size, is_critical); } bool AP_Logger_Backend::ShouldLog(bool is_critical) { if (!_front.WritesEnabled()) { return false; } if (!_initialised) { return false; } if (!_startup_messagewriter->finished() && !hal.scheduler->in_main_thread()) { // only the main thread may write startup messages out return false; } if (is_critical && have_logged_armed && !_front._params.file_disarm_rot) { // if we have previously logged while armed then we log all // critical messages from then on. That fixes a problem where // logs show the wrong flight mode if you disarm then arm again return true; } if (!_front.vehicle_is_armed() && !_front.log_while_disarmed()) { return false; } if (_front.vehicle_is_armed()) { have_logged_armed = true; } return true; } bool AP_Logger_Backend::Write_MessageF(const char *fmt, ...) { char msg[65] {}; // sizeof(log_Message.msg) + null-termination va_list ap; va_start(ap, fmt); hal.util->vsnprintf(msg, sizeof(msg), fmt, ap); va_end(ap); return Write_Message(msg); } // Write rally points bool AP_Logger_Backend::Write_RallyPoint(uint8_t total, uint8_t sequence, const RallyLocation &rally_point) { struct log_Rally pkt_rally = { LOG_PACKET_HEADER_INIT(LOG_RALLY_MSG), time_us : AP_HAL::micros64(), total : total, sequence : sequence, latitude : rally_point.lat, longitude : rally_point.lng, altitude : rally_point.alt }; return WriteBlock(&pkt_rally, sizeof(pkt_rally)); } // Write rally points void AP_Logger_Backend::Write_Rally() { LoggerMessageWriter_WriteAllRallyPoints writer; writer.set_logger_backend(this); writer.process(); }