/* * Copyright (c) 2001-2003 Swedish Institute of Computer Science. * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. * * Author: Adam Dunkels * */ #pragma once #include #if CONFIG_HAL_BOARD == HAL_BOARD_CHIBIOS #include "hwdef.h" #endif #ifdef __cplusplus extern "C" { #endif /* macOS specific */ #if defined(__APPLE__) /* lwip/contrib/ports/unix/port/netif/sio.c */ #include /* lwip/src/apps/http/makefsdata/makefsdata.c */ #define GETCWD(path, len) getcwd(path, len) #define GETCWD_SUCCEEDED(ret) (ret != NULL) #define CHDIR(path) chdir(path) #define CHDIR_SUCCEEDED(ret) (ret == 0) /* lwip/src/netif/ppp/fsm.c */ /* lwip/src/netif/ppp/pppos.c */ /* lwip/src/netif/ppp/vj.c */ #pragma GCC diagnostic ignored "-Wimplicit-fallthrough" #endif #ifdef LWIP_OPTTEST_FILE #include "lwipopts_test.h" #else /* LWIP_OPTTEST_FILE */ #define LWIP_IPV4 1 #define LWIP_IPV6 0 #define MEM_LIBC_MALLOC 1 #define MEMP_MEM_MALLOC 1 #define LWIP_NETCONN_SEM_PER_THREAD 0 /** * SO_REUSE==1: Enable SO_REUSEADDR option. */ #ifndef SO_REUSE #define SO_REUSE 1 #endif #define NO_SYS 0 #define LWIP_SOCKET (NO_SYS==0) #define LWIP_NETCONN (NO_SYS==0) #define LWIP_NETIF_API (NO_SYS==0) #ifndef LWIP_IGMP #define LWIP_IGMP LWIP_IPV4 #endif #define LWIP_ICMP LWIP_IPV4 #define LWIP_SNMP LWIP_UDP #ifdef LWIP_HAVE_MBEDTLS #define LWIP_SNMP_V3 (LWIP_SNMP) #endif #define LWIP_DNS 0 #define LWIP_MDNS_RESPONDER 0 #define LWIP_NUM_NETIF_CLIENT_DATA (LWIP_MDNS_RESPONDER) #ifndef LWIP_HAVE_LOOPIF #define LWIP_HAVE_LOOPIF 1 #endif #ifndef LWIP_NETIF_LOOPBACK #define LWIP_NETIF_LOOPBACK 1 #endif #define LWIP_LOOPBACK_MAX_PBUFS 10 #define TCP_LISTEN_BACKLOG 1 #define LWIP_COMPAT_SOCKETS 0 #define LWIP_SO_RCVTIMEO 1 #define LWIP_SO_RCVBUF 1 #define LWIP_TCPIP_CORE_LOCKING 1 #define LWIP_NETIF_LINK_CALLBACK 1 #define LWIP_NETIF_STATUS_CALLBACK 1 #define LWIP_NETIF_EXT_STATUS_CALLBACK 1 #define USE_PPP 1 #define LWIP_TIMEVAL_PRIVATE 0 #define LWIP_FD_SET_PRIVATE 0 #define TCP_WND 12000 #define TCP_SND_BUF 12000 #define DEFAULT_ACCEPTMBOX_SIZE 20 // #define LWIP_DEBUG #ifdef LWIP_DEBUG #define LWIP_DBG_MIN_LEVEL 0 #define PPP_DEBUG LWIP_DBG_ON #define MEM_DEBUG LWIP_DBG_ON #define MEMP_DEBUG LWIP_DBG_ON #define PBUF_DEBUG LWIP_DBG_OFF #define API_LIB_DEBUG LWIP_DBG_OFF #define API_MSG_DEBUG LWIP_DBG_OFF #define TCPIP_DEBUG LWIP_DBG_ON #define NETIF_DEBUG LWIP_DBG_ON #define SOCKETS_DEBUG LWIP_DBG_OFF #define DNS_DEBUG LWIP_DBG_OFF #define AUTOIP_DEBUG LWIP_DBG_OFF #define DHCP_DEBUG LWIP_DBG_OFF #define IP_DEBUG LWIP_DBG_OFF #define IP_REASS_DEBUG LWIP_DBG_OFF #define ICMP_DEBUG LWIP_DBG_OFF #define IGMP_DEBUG LWIP_DBG_OFF #define UDP_DEBUG LWIP_DBG_OFF #define TCP_DEBUG LWIP_DBG_ON #define TCP_INPUT_DEBUG LWIP_DBG_ON #define TCP_OUTPUT_DEBUG LWIP_DBG_ON #define TCP_RTO_DEBUG LWIP_DBG_OFF #define TCP_CWND_DEBUG LWIP_DBG_OFF #define TCP_WND_DEBUG LWIP_DBG_OFF #define TCP_FR_DEBUG LWIP_DBG_OFF #define TCP_QLEN_DEBUG LWIP_DBG_OFF #define TCP_RST_DEBUG LWIP_DBG_OFF #endif #define LWIP_DBG_TYPES_ON (LWIP_DBG_ON|LWIP_DBG_TRACE|LWIP_DBG_STATE|LWIP_DBG_FRESH|LWIP_DBG_HALT) /* ---------- Memory options ---------- */ /* MEM_ALIGNMENT: should be set to the alignment of the CPU for which lwIP is compiled. 4 byte alignment -> define MEM_ALIGNMENT to 4, 2 byte alignment -> define MEM_ALIGNMENT to 2. */ /* MSVC port: intel processors don't need 4-byte alignment, but are faster that way! */ #define MEM_ALIGNMENT 4U /* MEM_SIZE: the size of the heap memory. If the application will send a lot of data that needs to be copied, this should be set high. */ #define MEM_SIZE 10240 /* MEMP_NUM_PBUF: the number of memp struct pbufs. If the application sends a lot of data out of ROM (or other static memory), this should be set high. */ #define MEMP_NUM_PBUF 64 /* MEMP_NUM_RAW_PCB: the number of UDP protocol control blocks. One per active RAW "connection". */ #define MEMP_NUM_RAW_PCB 3 /* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One per active UDP "connection". */ #define MEMP_NUM_UDP_PCB 8 /* MEMP_NUM_TCP_PCB: the number of simultaneously active TCP connections. */ #define MEMP_NUM_TCP_PCB 5 /* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections. */ #define MEMP_NUM_TCP_PCB_LISTEN 8 /* MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments. */ #define MEMP_NUM_TCP_SEG 16 /* MEMP_NUM_SYS_TIMEOUT: the number of simultaneously active timeouts. */ #define MEMP_NUM_SYS_TIMEOUT 17 /* The following four are used only with the sequential API and can be set to 0 if the application only will use the raw API. */ /* MEMP_NUM_NETBUF: the number of struct netbufs. */ #define MEMP_NUM_NETBUF 100 /* MEMP_NUM_NETCONN: the number of struct netconns. */ #define MEMP_NUM_NETCONN 64 /* MEMP_NUM_TCPIP_MSG_*: the number of struct tcpip_msg, which is used for sequential API communication and incoming packets. Used in src/api/tcpip.c. */ #define MEMP_NUM_TCPIP_MSG_API 16 #define MEMP_NUM_TCPIP_MSG_INPKT 16 /* ---------- Pbuf options ---------- */ /* PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */ #define PBUF_POOL_SIZE 120 /* PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. */ #define PBUF_POOL_BUFSIZE 256 /** SYS_LIGHTWEIGHT_PROT * define SYS_LIGHTWEIGHT_PROT in lwipopts.h if you want inter-task protection * for certain critical regions during buffer allocation, deallocation and memory * allocation and deallocation. */ #define SYS_LIGHTWEIGHT_PROT (NO_SYS==0) /* ---------- TCP options ---------- */ #define LWIP_TCP 1 #define TCP_TTL 255 #ifndef LWIP_ALTCP #define LWIP_ALTCP (LWIP_TCP) #endif #ifdef LWIP_HAVE_MBEDTLS #define LWIP_ALTCP_TLS (LWIP_TCP) #define LWIP_ALTCP_TLS_MBEDTLS (LWIP_TCP) #endif /* Controls if TCP should queue segments that arrive out of order. Define to 0 if your device is low on memory. */ #define TCP_QUEUE_OOSEQ 1 /* TCP Maximum segment size. */ #define TCP_MSS 1024 /* TCP sender buffer space (bytes). */ #ifndef TCP_SND_BUF #define TCP_SND_BUF 2048 #endif /* TCP sender buffer space (pbufs). This must be at least = 2 * TCP_SND_BUF/TCP_MSS for things to work. */ #define TCP_SND_QUEUELEN (4 * TCP_SND_BUF/TCP_MSS) /* TCP writable space (bytes). This must be less than or equal to TCP_SND_BUF. It is the amount of space which must be available in the tcp snd_buf for select to return writable */ #define TCP_SNDLOWAT (TCP_SND_BUF/2) /* TCP receive window. */ #ifndef TCP_WND #define TCP_WND (20 * 1024) #endif /* Maximum number of retransmissions of data segments. */ #define TCP_MAXRTX 12 /* Maximum number of retransmissions of SYN segments. */ #define TCP_SYNMAXRTX 4 /* ---------- ARP options ---------- */ #define LWIP_ARP 1 #define ARP_TABLE_SIZE 10 #define ARP_QUEUEING 1 #ifndef ARP_PROXYARP_SUPPORT #define ARP_PROXYARP_SUPPORT 1 #endif /* ---------- IP options ---------- */ /* Define IP_FORWARD to 1 if you wish to have the ability to forward IP packets across network interfaces. If you are going to run lwIP on a device with only one network interface, define this to 0. */ #ifndef IP_FORWARD #define IP_FORWARD 1 #endif /* extra header space when forwarding for adding the ethernet header */ #define PBUF_LINK_HLEN 16 /* IP reassembly and segmentation.These are orthogonal even * if they both deal with IP fragments */ #define IP_REASSEMBLY 1 #define IP_REASS_MAX_PBUFS (10 * ((1500 + PBUF_POOL_BUFSIZE - 1) / PBUF_POOL_BUFSIZE)) #define MEMP_NUM_REASSDATA IP_REASS_MAX_PBUFS #define IP_FRAG 1 #define IPV6_FRAG_COPYHEADER 1 /* ---------- ICMP options ---------- */ #define ICMP_TTL 255 /* ---------- DHCP options ---------- */ /* Define LWIP_DHCP to 1 if you want DHCP configuration of interfaces. */ #ifndef LWIP_DHCP #define LWIP_DHCP 1 #endif /* 1 if you want to do an ARP check on the offered address (recommended). */ #define DHCP_DOES_ARP_CHECK (LWIP_DHCP) /* ---------- AUTOIP options ------- */ #define LWIP_AUTOIP (LWIP_DHCP) #define LWIP_DHCP_AUTOIP_COOP (LWIP_DHCP && LWIP_AUTOIP) /* ---------- UDP options ---------- */ #ifndef LWIP_UDP #define LWIP_UDP 1 #endif #define LWIP_UDPLITE LWIP_UDP #define UDP_TTL 255 /* ---------- RAW options ---------- */ #define LWIP_RAW 0 /* ---------- Statistics options ---------- */ #define LWIP_STATS 0 #define LWIP_STATS_DISPLAY 0 /* ---------- NETBIOS options ---------- */ #define LWIP_NETBIOS_RESPOND_NAME_QUERY 0 /* ---------- PPP options ---------- */ #ifndef PPP_SUPPORT #define PPP_SUPPORT 1 /* Set > 0 for PPP */ #endif #if PPP_SUPPORT #define NUM_PPP 1 /* Max PPP sessions. */ /* Select modules to enable. Ideally these would be set in the makefile but * we're limited by the command line length so you need to modify the settings * in this file. */ #define PPPOE_SUPPORT 0 #define PPPOS_SUPPORT PPP_SUPPORT #define PAP_SUPPORT 0 /* Set > 0 for PAP. */ #define CHAP_SUPPORT 0 /* Set > 0 for CHAP. */ #define MSCHAP_SUPPORT 0 /* Set > 0 for MSCHAP */ #define CBCP_SUPPORT 0 /* Set > 0 for CBCP (NOT FUNCTIONAL!) */ #define CCP_SUPPORT 0 /* Set > 0 for CCP */ /* VJ support disabled due to bugs with IP forwarding */ #define VJ_SUPPORT 0 /* Set > 0 for VJ header compression. */ #define MD5_SUPPORT 0 /* Set > 0 for MD5 (see also CHAP) */ #endif /* PPP_SUPPORT */ #endif /* LWIP_OPTTEST_FILE */ /* The following defines must be done even in OPTTEST mode: */ #if !defined(NO_SYS) || !NO_SYS /* default is 0 */ void sys_check_core_locking(void); #define LWIP_ASSERT_CORE_LOCKED() sys_check_core_locking() #endif #ifndef LWIP_PLATFORM_ASSERT /* Define LWIP_PLATFORM_ASSERT to something to catch missing stdio.h includes */ void ap_networking_platform_assert(const char *msg, int line, const char *file); #define LWIP_PLATFORM_ASSERT(x) ap_networking_platform_assert(x, __LINE__, __FILE__) #endif /* map LWIP debugging onto ap_networking_printf to allow for easier redirection to a file or dedicated serial port */ #ifdef __cplusplus extern "C" { #endif int ap_networking_printf(const char *fmt, ...); #ifdef __cplusplus } #endif #define LWIP_PLATFORM_DIAG(x) do {ap_networking_printf x; } while(0) // #define AP_NETWORKING_LWIP_DEBUG_FILE "lwip.log" #ifdef __cplusplus } #endif