/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*- /* * control_stabilize.pde - init and run calls for stabilize flight mode */ // stabilize_init - initialise stabilize controller static bool stabilize_init(bool ignore_checks) { // set target altitude to zero for reporting // To-Do: make pos controller aware when it's active/inactive so it can always report the altitude error? pos_control.set_alt_target(0); // stabilize should never be made to fail return true; } // stabilize_run - runs the main stabilize controller // should be called at 100hz or more static void stabilize_run() { int16_t target_roll, target_pitch; float target_yaw_rate; int16_t pilot_throttle_scaled; // if not armed or throttle at zero, set throttle to zero and exit immediately if(!motors.armed() || g.rc_3.control_in <= 0) { attitude_control.relax_bf_rate_controller(); attitude_control.set_yaw_target_to_current_heading(); attitude_control.set_throttle_out(0, false); return; } // apply SIMPLE mode transform to pilot inputs update_simple_mode(); // convert pilot input to lean angles // To-Do: convert get_pilot_desired_lean_angles to return angles as floats get_pilot_desired_lean_angles(g.rc_1.control_in, g.rc_2.control_in, target_roll, target_pitch); // get pilot's desired yaw rate target_yaw_rate = get_pilot_desired_yaw_rate(g.rc_4.control_in); // get pilot's desired throttle pilot_throttle_scaled = get_pilot_desired_throttle(g.rc_3.control_in); // reset target lean angles and heading while landed if (ap.land_complete) { attitude_control.relax_bf_rate_controller(); attitude_control.set_yaw_target_to_current_heading(); }else{ // call attitude controller attitude_control.angle_ef_roll_pitch_rate_ef_yaw_smooth(target_roll, target_pitch, target_yaw_rate, get_smoothing_gain()); // body-frame rate controller is run directly from 100hz loop } // output pilot's throttle attitude_control.set_throttle_out(pilot_throttle_scaled, true); }