#include "AP_Mount_Backend.h" #if HAL_MOUNT_ENABLED #include #include #include extern const AP_HAL::HAL& hal; #define AP_MOUNT_UPDATE_DT 0.02 // update rate in seconds. update() should be called at this rate // Default init function for every mount void AP_Mount_Backend::init() { // setting default target sysid from parameters _target_sysid = _params.sysid_default.get(); } // set device id of this instance, for MNTx_DEVID parameter void AP_Mount_Backend::set_dev_id(uint32_t id) { _params.dev_id.set_and_save(int32_t(id)); } // return true if this mount accepts roll targets bool AP_Mount_Backend::has_roll_control() const { return (_params.roll_angle_min < _params.roll_angle_max); } // return true if this mount accepts pitch targets bool AP_Mount_Backend::has_pitch_control() const { return (_params.pitch_angle_min < _params.pitch_angle_max); } // set angle target in degrees // yaw_is_earth_frame (aka yaw_lock) should be true if yaw angle is earth-frame, false if body-frame void AP_Mount_Backend::set_angle_target(float roll_deg, float pitch_deg, float yaw_deg, bool yaw_is_earth_frame) { // enforce angle limits roll_deg = constrain_float(roll_deg, _params.roll_angle_min, _params.roll_angle_max); pitch_deg = constrain_float(pitch_deg, _params.pitch_angle_min, _params.pitch_angle_max); if (!yaw_is_earth_frame) { // only limit yaw if in body-frame. earth-frame yaw limiting is backend specific // custom wrap code (instead of wrap_180) to better handle yaw of <= -180 if (yaw_deg > 180) { yaw_deg -= 360; } yaw_deg = constrain_float(yaw_deg, _params.yaw_angle_min, _params.yaw_angle_max); } // set angle targets mnt_target.target_type = MountTargetType::ANGLE; mnt_target.angle_rad.roll = radians(roll_deg); mnt_target.angle_rad.pitch = radians(pitch_deg); mnt_target.angle_rad.yaw = radians(yaw_deg); mnt_target.angle_rad.yaw_is_ef = yaw_is_earth_frame; // set the mode to mavlink targeting set_mode(MAV_MOUNT_MODE_MAVLINK_TARGETING); } // sets rate target in deg/s // yaw_lock should be true if the yaw rate is earth-frame, false if body-frame (e.g. rotates with body of vehicle) void AP_Mount_Backend::set_rate_target(float roll_degs, float pitch_degs, float yaw_degs, bool yaw_is_earth_frame) { // set rate targets mnt_target.target_type = MountTargetType::RATE; mnt_target.rate_rads.roll = radians(roll_degs); mnt_target.rate_rads.pitch = radians(pitch_degs); mnt_target.rate_rads.yaw = radians(yaw_degs); mnt_target.rate_rads.yaw_is_ef = yaw_is_earth_frame; // set the mode to mavlink targeting set_mode(MAV_MOUNT_MODE_MAVLINK_TARGETING); } // set_roi_target - sets target location that mount should attempt to point towards void AP_Mount_Backend::set_roi_target(const Location &target_loc) { // set the target gps location _roi_target = target_loc; _roi_target_set = true; // set the mode to GPS tracking mode set_mode(MAV_MOUNT_MODE_GPS_POINT); } // clear_roi_target - clears target location that mount should attempt to point towards void AP_Mount_Backend::clear_roi_target() { // clear the target GPS location _roi_target_set = false; // reset the mode if in GPS tracking mode if (_mode == MAV_MOUNT_MODE_GPS_POINT) { MAV_MOUNT_MODE default_mode = (MAV_MOUNT_MODE)_params.default_mode.get(); set_mode(default_mode); } } // set_sys_target - sets system that mount should attempt to point towards void AP_Mount_Backend::set_target_sysid(uint8_t sysid) { _target_sysid = sysid; // set the mode to sysid tracking mode set_mode(MAV_MOUNT_MODE_SYSID_TARGET); } #if AP_MAVLINK_MSG_MOUNT_CONFIGURE_ENABLED // process MOUNT_CONFIGURE messages received from GCS. deprecated. void AP_Mount_Backend::handle_mount_configure(const mavlink_mount_configure_t &packet) { set_mode((MAV_MOUNT_MODE)packet.mount_mode); } #endif #if HAL_GCS_ENABLED // send a GIMBAL_DEVICE_ATTITUDE_STATUS message to GCS void AP_Mount_Backend::send_gimbal_device_attitude_status(mavlink_channel_t chan) { if (suppress_heartbeat()) { // block heartbeat from transmitting to the GCS GCS_MAVLINK::disable_channel_routing(chan); } Quaternion att_quat; if (!get_attitude_quaternion(att_quat)) { return; } // construct quaternion array const float quat_array[4] = {att_quat.q1, att_quat.q2, att_quat.q3, att_quat.q4}; mavlink_msg_gimbal_device_attitude_status_send(chan, 0, // target system 0, // target component AP_HAL::millis(), // autopilot system time get_gimbal_device_flags(), quat_array, // attitude expressed as quaternion std::numeric_limits::quiet_NaN(), // roll axis angular velocity (NaN for unknown) std::numeric_limits::quiet_NaN(), // pitch axis angular velocity (NaN for unknown) std::numeric_limits::quiet_NaN(), // yaw axis angular velocity (NaN for unknown) 0, // failure flags (not supported) std::numeric_limits::quiet_NaN(), // delta_yaw (NaN for unknonw) std::numeric_limits::quiet_NaN(), // delta_yaw_velocity (NaN for unknonw) _instance + 1); // gimbal_device_id } #endif // return gimbal manager capability flags used by GIMBAL_MANAGER_INFORMATION message uint32_t AP_Mount_Backend::get_gimbal_manager_capability_flags() const { uint32_t cap_flags = GIMBAL_MANAGER_CAP_FLAGS_HAS_RETRACT | GIMBAL_MANAGER_CAP_FLAGS_HAS_NEUTRAL | GIMBAL_MANAGER_CAP_FLAGS_HAS_RC_INPUTS | GIMBAL_MANAGER_CAP_FLAGS_CAN_POINT_LOCATION_LOCAL | GIMBAL_MANAGER_CAP_FLAGS_CAN_POINT_LOCATION_GLOBAL; // roll control if (has_roll_control()) { cap_flags |= GIMBAL_MANAGER_CAP_FLAGS_HAS_ROLL_AXIS | GIMBAL_MANAGER_CAP_FLAGS_HAS_ROLL_FOLLOW | GIMBAL_MANAGER_CAP_FLAGS_HAS_ROLL_LOCK; } // pitch control if (has_pitch_control()) { cap_flags |= GIMBAL_MANAGER_CAP_FLAGS_HAS_PITCH_AXIS | GIMBAL_MANAGER_CAP_FLAGS_HAS_PITCH_FOLLOW | GIMBAL_MANAGER_CAP_FLAGS_HAS_PITCH_LOCK; } // yaw control if (has_pan_control()) { cap_flags |= GIMBAL_MANAGER_CAP_FLAGS_HAS_YAW_AXIS | GIMBAL_MANAGER_CAP_FLAGS_HAS_YAW_FOLLOW | GIMBAL_MANAGER_CAP_FLAGS_HAS_YAW_LOCK; } return cap_flags; } // send a GIMBAL_MANAGER_INFORMATION message to GCS void AP_Mount_Backend::send_gimbal_manager_information(mavlink_channel_t chan) { mavlink_msg_gimbal_manager_information_send(chan, AP_HAL::millis(), // autopilot system time get_gimbal_manager_capability_flags(), // bitmap of gimbal manager capability flags _instance + 1, // gimbal device id radians(_params.roll_angle_min), // roll_min in radians radians(_params.roll_angle_max), // roll_max in radians radians(_params.pitch_angle_min), // pitch_min in radians radians(_params.pitch_angle_max), // pitch_max in radians radians(_params.yaw_angle_min), // yaw_min in radians radians(_params.yaw_angle_max)); // yaw_max in radians } // send a GIMBAL_MANAGER_STATUS message to GCS void AP_Mount_Backend::send_gimbal_manager_status(mavlink_channel_t chan) { uint32_t flags = GIMBAL_MANAGER_FLAGS_ROLL_LOCK | GIMBAL_MANAGER_FLAGS_PITCH_LOCK; if (_yaw_lock) { flags |= GIMBAL_MANAGER_FLAGS_YAW_LOCK; } mavlink_msg_gimbal_manager_status_send(chan, AP_HAL::millis(), // autopilot system time flags, // bitmap of gimbal manager flags _instance + 1, // gimbal device id mavlink_control_id.sysid, // primary control system id mavlink_control_id.compid, // primary control component id 0, // secondary control system id 0); // secondary control component id } #if AP_MAVLINK_MSG_MOUNT_CONTROL_ENABLED // process MOUNT_CONTROL messages received from GCS. deprecated. void AP_Mount_Backend::handle_mount_control(const mavlink_mount_control_t &packet) { switch (get_mode()) { case MAV_MOUNT_MODE_MAVLINK_TARGETING: // input_a : Pitch in centi-degrees // input_b : Roll in centi-degrees // input_c : Yaw in centi-degrees (interpreted as body-frame) set_angle_target(packet.input_b * 0.01, packet.input_a * 0.01, packet.input_c * 0.01, false); break; case MAV_MOUNT_MODE_GPS_POINT: { // input_a : lat in degE7 // input_b : lon in degE7 // input_c : alt in cm (interpreted as above home) const Location target_location { packet.input_a, packet.input_b, packet.input_c, Location::AltFrame::ABOVE_HOME }; set_roi_target(target_location); break; } case MAV_MOUNT_MODE_RETRACT: case MAV_MOUNT_MODE_NEUTRAL: case MAV_MOUNT_MODE_RC_TARGETING: case MAV_MOUNT_MODE_SYSID_TARGET: case MAV_MOUNT_MODE_HOME_LOCATION: default: // no effect in these modes break; } } #endif // handle do_mount_control command. Returns MAV_RESULT_ACCEPTED on success MAV_RESULT AP_Mount_Backend::handle_command_do_mount_control(const mavlink_command_int_t &packet) { const MAV_MOUNT_MODE new_mode = (MAV_MOUNT_MODE)packet.z; // interpret message fields based on mode switch (new_mode) { case MAV_MOUNT_MODE_RETRACT: case MAV_MOUNT_MODE_NEUTRAL: case MAV_MOUNT_MODE_RC_TARGETING: case MAV_MOUNT_MODE_HOME_LOCATION: // simply set mode set_mode(new_mode); return MAV_RESULT_ACCEPTED; case MAV_MOUNT_MODE_MAVLINK_TARGETING: { // set body-frame target angles (in degrees) from mavlink message const float pitch_deg = packet.param1; // param1: pitch (in degrees) const float roll_deg = packet.param2; // param2: roll in degrees const float yaw_deg = packet.param3; // param3: yaw in degrees // warn if angles are invalid to catch angles sent in centi-degrees if ((fabsf(pitch_deg) > 90) || (fabsf(roll_deg) > 180) || (fabsf(yaw_deg) > 360)) { send_warning_to_GCS("invalid angle targets"); return MAV_RESULT_FAILED; } set_angle_target(packet.param2, packet.param1, packet.param3, false); return MAV_RESULT_ACCEPTED; } case MAV_MOUNT_MODE_GPS_POINT: { // set lat, lon, alt position targets from mavlink message // warn if lat, lon appear to be in param1,2 instead of param x,y as this indicates // sender is relying on a bug in AP-4.2's (and earlier) handling of MAV_CMD_DO_MOUNT_CONTROL if (!is_zero(packet.param1) && !is_zero(packet.param2) && packet.x == 0 && packet.y == 0) { send_warning_to_GCS("GPS_POINT target invalid"); return MAV_RESULT_FAILED; } // param4: altitude in meters // x: latitude in degrees * 1E7 // y: longitude in degrees * 1E7 const Location target_location { packet.x, // latitude in degrees * 1E7 packet.y, // longitude in degrees * 1E7 (int32_t)packet.param4 * 100, // alt converted from meters to cm Location::AltFrame::ABOVE_HOME }; set_roi_target(target_location); return MAV_RESULT_ACCEPTED; } default: // invalid mode return MAV_RESULT_FAILED; } } // handle do_gimbal_manager_configure. Returns MAV_RESULT_ACCEPTED on success // requires original message in order to extract caller's sysid and compid MAV_RESULT AP_Mount_Backend::handle_command_do_gimbal_manager_configure(const mavlink_command_int_t &packet, const mavlink_message_t &msg) { // sanity check param1 and param2 values if ((packet.param1 < -3) || (packet.param1 > UINT8_MAX) || (packet.param2 < -3) || (packet.param2 > UINT8_MAX)) { return MAV_RESULT_FAILED; } // convert negative packet1 and packet2 values int16_t new_sysid = packet.param1; switch (new_sysid) { case -1: // leave unchanged break; case -2: // set itself in control mavlink_control_id.sysid = msg.sysid; mavlink_control_id.compid = msg.compid; break; case -3: // remove control if currently in control if ((mavlink_control_id.sysid == msg.sysid) && (mavlink_control_id.compid == msg.compid)) { mavlink_control_id.sysid = 0; mavlink_control_id.compid = 0; } break; default: mavlink_control_id.sysid = packet.param1; mavlink_control_id.compid = packet.param2; break; } return MAV_RESULT_ACCEPTED; } // handle a GLOBAL_POSITION_INT message bool AP_Mount_Backend::handle_global_position_int(uint8_t msg_sysid, const mavlink_global_position_int_t &packet) { if (_target_sysid != msg_sysid) { return false; } _target_sysid_location.lat = packet.lat; _target_sysid_location.lng = packet.lon; // global_position_int.alt is *UP*, so is location. _target_sysid_location.set_alt_cm(packet.alt*0.1, Location::AltFrame::ABSOLUTE); _target_sysid_location_set = true; return true; } // write mount log packet void AP_Mount_Backend::write_log(uint64_t timestamp_us) { // return immediately if no yaw estimate float ahrs_yaw = AP::ahrs().yaw; if (isnan(ahrs_yaw)) { return; } const auto nanf = AP::logger().quiet_nanf(); // get_attitude_quaternion and convert to Euler angles float roll = nanf; float pitch = nanf; float yaw_bf = nanf; float yaw_ef = nanf; if (_frontend.get_attitude_euler(_instance, roll, pitch, yaw_bf)) { yaw_ef = wrap_180(yaw_bf + degrees(ahrs_yaw)); } // get mount's target (desired) angles and convert yaw to earth frame float target_roll = nanf; float target_pitch = nanf; float target_yaw = nanf; bool target_yaw_is_ef = false; IGNORE_RETURN(get_angle_target(target_roll, target_pitch, target_yaw, target_yaw_is_ef)); // get rangefinder distance float rangefinder_dist = nanf; IGNORE_RETURN(get_rangefinder_distance(rangefinder_dist)); const struct log_Mount pkt { LOG_PACKET_HEADER_INIT(static_cast(LOG_MOUNT_MSG)), time_us : (timestamp_us > 0) ? timestamp_us : AP_HAL::micros64(), instance : _instance, desired_roll : target_roll, actual_roll : roll, desired_pitch : target_pitch, actual_pitch : pitch, desired_yaw_bf: target_yaw_is_ef ? nanf : target_yaw, actual_yaw_bf : yaw_bf, desired_yaw_ef: target_yaw_is_ef ? target_yaw : nanf, actual_yaw_ef : yaw_ef, rangefinder_dist : rangefinder_dist, }; AP::logger().WriteCriticalBlock(&pkt, sizeof(pkt)); } // get pilot input (in the range -1 to +1) received through RC void AP_Mount_Backend::get_rc_input(float& roll_in, float& pitch_in, float& yaw_in) const { const RC_Channel *roll_ch = rc().find_channel_for_option(_instance == 0 ? RC_Channel::AUX_FUNC::MOUNT1_ROLL : RC_Channel::AUX_FUNC::MOUNT2_ROLL); const RC_Channel *pitch_ch = rc().find_channel_for_option(_instance == 0 ? RC_Channel::AUX_FUNC::MOUNT1_PITCH : RC_Channel::AUX_FUNC::MOUNT2_PITCH); const RC_Channel *yaw_ch = rc().find_channel_for_option(_instance == 0 ? RC_Channel::AUX_FUNC::MOUNT1_YAW : RC_Channel::AUX_FUNC::MOUNT2_YAW); roll_in = 0; if ((roll_ch != nullptr) && (roll_ch->get_radio_in() > 0)) { roll_in = roll_ch->norm_input_dz(); } pitch_in = 0; if ((pitch_ch != nullptr) && (pitch_ch->get_radio_in() > 0)) { pitch_in = pitch_ch->norm_input_dz(); } yaw_in = 0; if ((yaw_ch != nullptr) && (yaw_ch->get_radio_in() > 0)) { yaw_in = yaw_ch->norm_input_dz(); } } // get angle or rate targets from pilot RC // target_type will be either ANGLE or RATE, rpy will be the target angle in deg or rate in deg/s void AP_Mount_Backend::get_rc_target(MountTargetType& target_type, MountTarget& target_rpy) const { // get RC input from pilot float roll_in, pitch_in, yaw_in; get_rc_input(roll_in, pitch_in, yaw_in); // yaw frame target_rpy.yaw_is_ef = _yaw_lock; // if RC_RATE is zero, targets are angle if (_params.rc_rate_max <= 0) { target_type = MountTargetType::ANGLE; // roll angle target_rpy.roll = radians(((roll_in + 1.0f) * 0.5f * (_params.roll_angle_max - _params.roll_angle_min) + _params.roll_angle_min)); // pitch angle target_rpy.pitch = radians(((pitch_in + 1.0f) * 0.5f * (_params.pitch_angle_max - _params.pitch_angle_min) + _params.pitch_angle_min)); // yaw angle if (target_rpy.yaw_is_ef) { // if yaw is earth-frame pilot yaw input control angle from -180 to +180 deg target_rpy.yaw = yaw_in * M_PI; } else { // yaw target in body frame so apply body frame limits target_rpy.yaw = radians(((yaw_in + 1.0f) * 0.5f * (_params.yaw_angle_max - _params.yaw_angle_min) + _params.yaw_angle_min)); } return; } // calculate rate targets target_type = MountTargetType::RATE; const float rc_rate_max_rads = radians(_params.rc_rate_max.get()); target_rpy.roll = roll_in * rc_rate_max_rads; target_rpy.pitch = pitch_in * rc_rate_max_rads; target_rpy.yaw = yaw_in * rc_rate_max_rads; } // get angle targets (in radians) to a Location // returns true on success, false on failure bool AP_Mount_Backend::get_angle_target_to_location(const Location &loc, MountTarget& angle_rad) const { // exit immediately if vehicle's location is unavailable Location current_loc; if (!AP::ahrs().get_location(current_loc)) { return false; } // exit immediate if location is invalid if (!loc.initialised()) { return false; } const float GPS_vector_x = Location::diff_longitude(loc.lng, current_loc.lng)*cosf(ToRad((current_loc.lat + loc.lat) * 0.00000005f)) * 0.01113195f; const float GPS_vector_y = (loc.lat - current_loc.lat) * 0.01113195f; int32_t target_alt_cm = 0; if (!loc.get_alt_cm(Location::AltFrame::ABOVE_HOME, target_alt_cm)) { return false; } int32_t current_alt_cm = 0; if (!current_loc.get_alt_cm(Location::AltFrame::ABOVE_HOME, current_alt_cm)) { return false; } float GPS_vector_z = target_alt_cm - current_alt_cm; float target_distance = 100.0f*norm(GPS_vector_x, GPS_vector_y); // Careful , centimeters here locally. Baro/alt is in cm, lat/lon is in meters. // calculate roll, pitch, yaw angles angle_rad.roll = 0; angle_rad.pitch = atan2f(GPS_vector_z, target_distance); angle_rad.yaw = atan2f(GPS_vector_x, GPS_vector_y); angle_rad.yaw_is_ef = true; return true; } // get angle targets (in radians) to ROI location // returns true on success, false on failure bool AP_Mount_Backend::get_angle_target_to_roi(MountTarget& angle_rad) const { if (!_roi_target_set) { return false; } return get_angle_target_to_location(_roi_target, angle_rad); } // return body-frame yaw angle from a mount target float AP_Mount_Backend::MountTarget::get_bf_yaw() const { if (yaw_is_ef) { // convert to body-frame return wrap_PI(yaw - AP::ahrs().yaw); } // target is already body-frame return yaw; } // return earth-frame yaw angle from a mount target float AP_Mount_Backend::MountTarget::get_ef_yaw() const { if (yaw_is_ef) { // target is already earth-frame return yaw; } // convert to earth-frame return wrap_PI(yaw + AP::ahrs().yaw); } // sets roll, pitch, yaw and yaw_is_ef void AP_Mount_Backend::MountTarget::set(const Vector3f& rpy, bool yaw_is_ef_in) { roll = rpy.x; pitch = rpy.y; yaw = rpy.z; yaw_is_ef = yaw_is_ef_in; } // update angle targets using a given rate target // the resulting angle_rad yaw frame will match the rate_rad yaw frame // assumes a 50hz update rate void AP_Mount_Backend::update_angle_target_from_rate(const MountTarget& rate_rad, MountTarget& angle_rad) const { // update roll and pitch angles and apply limits angle_rad.roll = constrain_float(angle_rad.roll + rate_rad.roll * AP_MOUNT_UPDATE_DT, radians(_params.roll_angle_min), radians(_params.roll_angle_max)); angle_rad.pitch = constrain_float(angle_rad.pitch + rate_rad.pitch * AP_MOUNT_UPDATE_DT, radians(_params.pitch_angle_min), radians(_params.pitch_angle_max)); // ensure angle yaw frames matches rate yaw frame if (angle_rad.yaw_is_ef != rate_rad.yaw_is_ef) { if (rate_rad.yaw_is_ef) { angle_rad.yaw = angle_rad.get_ef_yaw(); } else { angle_rad.yaw = angle_rad.get_bf_yaw(); } angle_rad.yaw_is_ef = rate_rad.yaw_is_ef; } // update yaw angle target angle_rad.yaw = angle_rad.yaw + rate_rad.yaw * AP_MOUNT_UPDATE_DT; if (angle_rad.yaw_is_ef) { // if earth-frame yaw wraps between += 180 degrees angle_rad.yaw = wrap_PI(angle_rad.yaw); } else { // if body-frame constrain yaw to body-frame limits angle_rad.yaw = constrain_float(angle_rad.yaw, radians(_params.yaw_angle_min), radians(_params.yaw_angle_max)); } } // helper function to provide GIMBAL_DEVICE_FLAGS for use in GIMBAL_DEVICE_ATTITUDE_STATUS message uint16_t AP_Mount_Backend::get_gimbal_device_flags() const { const uint16_t flags = (get_mode() == MAV_MOUNT_MODE_RETRACT ? GIMBAL_DEVICE_FLAGS_RETRACT : 0) | (get_mode() == MAV_MOUNT_MODE_NEUTRAL ? GIMBAL_DEVICE_FLAGS_NEUTRAL : 0) | GIMBAL_DEVICE_FLAGS_ROLL_LOCK | // roll angle is always earth-frame GIMBAL_DEVICE_FLAGS_PITCH_LOCK; // pitch angle is always earth-frame, yaw_angle is always body-frame return flags; } // get angle targets (in radians) to home location // returns true on success, false on failure bool AP_Mount_Backend::get_angle_target_to_home(MountTarget& angle_rad) const { // exit immediately if home is not set if (!AP::ahrs().home_is_set()) { return false; } return get_angle_target_to_location(AP::ahrs().get_home(), angle_rad); } // get angle targets (in radians) to a vehicle with sysid of _target_sysid // returns true on success, false on failure bool AP_Mount_Backend::get_angle_target_to_sysid(MountTarget& angle_rad) const { // exit immediately if sysid is not set or no location available if (!_target_sysid_location_set) { return false; } if (!_target_sysid) { return false; } return get_angle_target_to_location(_target_sysid_location, angle_rad); } // get target rate in deg/sec. returns true on success bool AP_Mount_Backend::get_rate_target(float& roll_degs, float& pitch_degs, float& yaw_degs, bool& yaw_is_earth_frame) { if (mnt_target.target_type == MountTargetType::RATE) { roll_degs = degrees(mnt_target.rate_rads.roll); pitch_degs = degrees(mnt_target.rate_rads.pitch); yaw_degs = degrees(mnt_target.rate_rads.yaw); yaw_is_earth_frame = mnt_target.rate_rads.yaw_is_ef; return true; } return false; } // get target angle in deg. returns true on success bool AP_Mount_Backend::get_angle_target(float& roll_deg, float& pitch_deg, float& yaw_deg, bool& yaw_is_earth_frame) { if (mnt_target.target_type == MountTargetType::ANGLE) { roll_deg = degrees(mnt_target.angle_rad.roll); pitch_deg = degrees(mnt_target.angle_rad.pitch); yaw_deg = degrees(mnt_target.angle_rad.yaw); yaw_is_earth_frame = mnt_target.angle_rad.yaw_is_ef; return true; } return false; } // sent warning to GCS. Warnings are throttled to at most once every 30 seconds void AP_Mount_Backend::send_warning_to_GCS(const char* warning_str) { uint32_t now_ms = AP_HAL::millis(); if (now_ms - _last_warning_ms < 30000) { return; } GCS_SEND_TEXT(MAV_SEVERITY_WARNING, "Mount: %s", warning_str); _last_warning_ms = now_ms; } #endif // HAL_MOUNT_ENABLED