/* This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "AP_MSP.h" #include "AP_MSP_Telem_Backend.h" #include #include #if HAL_MSP_ENABLED extern const AP_HAL::HAL& hal; constexpr uint8_t AP_MSP_Telem_Backend::arrows[8]; using namespace MSP; AP_MSP_Telem_Backend::AP_MSP_Telem_Backend(AP_HAL::UARTDriver *uart) : AP_RCTelemetry(MSP_TIME_SLOT_MAX) { _msp_port.uart = uart; } /* Scheduler helper */ void AP_MSP_Telem_Backend::setup_wfq_scheduler(void) { // initialize packet weights for the WFQ scheduler // priority[i] = 1/_scheduler.packet_weight[i] // rate[i] = LinkRate * ( priority[i] / (sum(priority[1-n])) ) set_scheduler_entry(EMPTY_SLOT, 50, 50); // nothing to send set_scheduler_entry(NAME, 200, 200); // 5Hz 12 chars string used for general purpose text messages set_scheduler_entry(STATUS, 500, 500); // 2Hz flightmode set_scheduler_entry(CONFIG, 200, 200); // 5Hz OSD item positions set_scheduler_entry(RAW_GPS, 250, 250); // 4Hz GPS lat/lon set_scheduler_entry(COMP_GPS, 250, 250); // 4Hz home direction and distance set_scheduler_entry(ATTITUDE, 200, 200); // 5Hz attitude set_scheduler_entry(ALTITUDE, 250, 250); // 4Hz altitude(cm) and velocity(cm/s) set_scheduler_entry(ANALOG, 250, 250); // 4Hz rssi + batt set_scheduler_entry(BATTERY_STATE, 500, 500); // 2Hz battery #if HAL_WITH_ESC_TELEM set_scheduler_entry(ESC_SENSOR_DATA, 500, 500); // 2Hz ESC telemetry #endif set_scheduler_entry(RTC_DATETIME, 1000, 1000); // 1Hz RTC } /* * init - perform required initialisation */ bool AP_MSP_Telem_Backend::init() { enable_warnings(); return AP_RCTelemetry::init(); } bool AP_MSP_Telem_Backend::init_uart() { if (_msp_port.uart != nullptr) { // re-init port here for use in this thread _msp_port.uart->begin(0); return true; } return false; } void AP_MSP_Telem_Backend::process_outgoing_data() { if (is_scheduler_enabled()) { AP_RCTelemetry::run_wfq_scheduler(); } } /* Scheduler helper */ bool AP_MSP_Telem_Backend::is_packet_ready(uint8_t idx, bool queue_empty) { switch (idx) { case EMPTY_SLOT: // empty slot case NAME: // used for status_text messages case STATUS: // flightmode case CONFIG: // OSD config case RAW_GPS: // lat,lon, speed case COMP_GPS: // home dir,dist case ATTITUDE: // Attitude case ALTITUDE: // Altitude and Vario case ANALOG: // Rssi, Battery, mAh, Current case BATTERY_STATE: // voltage, capacity, current, mAh #if HAL_WITH_ESC_TELEM case ESC_SENSOR_DATA: // esc temp + rpm #endif case RTC_DATETIME: // RTC return true; default: return false; } } /* Invoked at each scheduler step */ void AP_MSP_Telem_Backend::process_packet(uint8_t idx) { if (idx == EMPTY_SLOT) { return; } uint8_t out_buf[MSP_PORT_OUTBUF_SIZE] {}; msp_packet_t reply = { .buf = { .ptr = out_buf, .end = MSP_ARRAYEND(out_buf), }, .cmd = (int16_t)msp_packet_type_map[idx], .flags = 0, .result = 0, }; uint8_t *out_buf_head = reply.buf.ptr; msp_process_out_command(msp_packet_type_map[idx], &reply.buf); uint32_t len = reply.buf.ptr - &out_buf[0]; sbuf_switch_to_reader(&reply.buf, out_buf_head); // change streambuf direction if (len > 0) { // don't send zero length packets msp_serial_encode(&_msp_port, &reply, _msp_port.msp_version); } _msp_port.c_state = MSP_IDLE; } uint8_t AP_MSP_Telem_Backend::calc_cell_count(const float battery_voltage) { return floorf((battery_voltage / CELLFULL) + 1); } float AP_MSP_Telem_Backend::get_vspeed_ms(void) const { { // release semaphore as soon as possible AP_AHRS &_ahrs = AP::ahrs(); Vector3f v {}; WITH_SEMAPHORE(_ahrs.get_semaphore()); if (_ahrs.get_velocity_NED(v)) { return -v.z; } } AP_Baro &_baro = AP::baro(); WITH_SEMAPHORE(_baro.get_semaphore()); return _baro.get_climb_rate(); } void AP_MSP_Telem_Backend::update_home_pos(home_state_t &home_state) { AP_AHRS &_ahrs = AP::ahrs(); WITH_SEMAPHORE(_ahrs.get_semaphore()); Location loc; float alt; if (_ahrs.get_location(loc) && _ahrs.home_is_set()) { const Location &home_loc = _ahrs.get_home(); home_state.home_distance_m = home_loc.get_distance(loc); home_state.home_bearing_cd = loc.get_bearing_to(home_loc); } else { home_state.home_distance_m = 0; home_state.home_bearing_cd = 0; } _ahrs.get_relative_position_D_home(alt); home_state.rel_altitude_cm = -alt * 100; home_state.home_is_set = _ahrs.home_is_set(); } void AP_MSP_Telem_Backend::update_gps_state(gps_state_t &gps_state) { AP_GPS& gps = AP::gps(); memset(&gps_state, 0, sizeof(gps_state)); WITH_SEMAPHORE(gps.get_semaphore()); gps_state.fix_type = gps.status() >= AP_GPS::GPS_Status::GPS_OK_FIX_3D? 2:0; gps_state.num_sats = gps.num_sats(); if (gps_state.fix_type > 0) { const Location &loc = AP::gps().location(); //get gps instance 0 gps_state.lat = loc.lat; gps_state.lon = loc.lng; gps_state.alt_m = loc.alt/100; // 1m resolution gps_state.speed_cms = gps.ground_speed() * 100; gps_state.ground_course_cd = gps.ground_course_cd(); } } void AP_MSP_Telem_Backend::update_battery_state(battery_state_t &battery_state) { memset(&battery_state, 0, sizeof(battery_state)); const AP_BattMonitor &_battery = AP::battery(); if (!_battery.current_amps(battery_state.batt_current_a)) { battery_state.batt_current_a = 0; } if (!_battery.consumed_mah(battery_state.batt_consumed_mah)) { battery_state.batt_consumed_mah = 0; } battery_state.batt_voltage_v =_battery.voltage(); battery_state.batt_capacity_mah = _battery.pack_capacity_mah(); const AP_Notify& notify = AP::notify(); if (notify.flags.failsafe_battery) { battery_state.batt_state = MSP_BATTERY_CRITICAL; } else { battery_state.batt_state = MSP_BATTERY_OK; } // detect cellcount and update only if we get a higher values, we do not want to update it while discharging uint8_t cc = calc_cell_count(battery_state.batt_voltage_v); if (cc > battery_state.batt_cellcount) { battery_state.batt_cellcount = cc; } } void AP_MSP_Telem_Backend::update_airspeed(airspeed_state_t &airspeed_state) { AP_AHRS &ahrs = AP::ahrs(); WITH_SEMAPHORE(ahrs.get_semaphore()); airspeed_state.airspeed_have_estimate = ahrs.airspeed_estimate(airspeed_state.airspeed_estimate_ms); if (!airspeed_state.airspeed_have_estimate) { airspeed_state.airspeed_estimate_ms = 0.0; } } /* MSP OSDs can display up to MSP_TXT_VISIBLE_CHARS chars (UTF8 characters are supported) We display the flight mode string either with or without wind state */ void AP_MSP_Telem_Backend::update_flight_mode_str(char *flight_mode_str, uint8_t size, bool wind_enabled) { #if OSD_ENABLED AP_OSD *osd = AP::osd(); if (osd == nullptr) { return; } #endif AP_Notify *notify = AP_Notify::get_singleton(); if (notify == nullptr) { return; } // clear memset(flight_mode_str, 0, size); if (wind_enabled) { /* Wind is rendered next to the current flight mode, for the direction we use an UTF8 arrow (bytes 0xE286[nn]) example: MANU 4m/s ↗ */ AP_AHRS &ahrs = AP::ahrs(); Vector3f v; { WITH_SEMAPHORE(ahrs.get_semaphore()); v = ahrs.wind_estimate(); } bool invert_wind = false; #if OSD_ENABLED AP_MSP *msp = AP::msp(); if (msp == nullptr) { return; } invert_wind = osd->screen[msp->_msp_status.current_screen].check_option(AP_OSD::OPTION_INVERTED_WIND); #endif if (invert_wind) { v = -v; } uint8_t units = OSD_UNIT_METRIC; #if OSD_ENABLED units = osd->units == AP_OSD::UNITS_IMPERIAL ? OSD_UNIT_IMPERIAL : OSD_UNIT_METRIC; #endif // if needed convert m/s to ft/s const float v_length = (units == OSD_UNIT_METRIC) ? v.length() : v.length() * 3.28084; const char* unit = (units == OSD_UNIT_METRIC) ? "m/s" : "f/s"; if (v_length > 1.0f) { const int32_t angle = wrap_360_cd(DEGX100 * atan2f(v.y, v.x) - ahrs.yaw_sensor); const int32_t interval = 36000 / ARRAY_SIZE(arrows); uint8_t arrow = arrows[((angle + interval / 2) / interval) % ARRAY_SIZE(arrows)]; snprintf(flight_mode_str, size, "%s %d%s%c%c%c", notify->get_flight_mode_str(), (uint8_t)roundf(v_length), unit, 0xE2, 0x86, arrow); } else { snprintf(flight_mode_str, size, "%s ---%s", notify->get_flight_mode_str(), unit); } } else { /* Flight mode is rendered with simple mode flags examples: MANU MANU [S] MANU [SS] */ #if HAL_GCS_ENABLED const char* simple_mode_str = gcs().simple_input_active() ? " [S]" : (gcs().supersimple_input_active() ? " [SS]" : ""); snprintf(flight_mode_str, size, "%s%s", notify->get_flight_mode_str(), simple_mode_str); #else snprintf(flight_mode_str, size, "%s", notify->get_flight_mode_str()); #endif } } void AP_MSP_Telem_Backend::enable_warnings() { AP_MSP *msp = AP::msp(); if (msp == nullptr) { return; } BIT_SET(msp->_osd_config.enabled_warnings, OSD_WARNING_FAIL_SAFE); BIT_SET(msp->_osd_config.enabled_warnings, OSD_WARNING_BATTERY_CRITICAL); } void AP_MSP_Telem_Backend::process_incoming_data() { if (_msp_port.uart == nullptr) { return; } uint32_t numc = MIN(_msp_port.uart->available(), 1024U); if (numc > 0) { // Process incoming bytes while (numc-- > 0) { const uint8_t c = _msp_port.uart->read(); msp_parse_received_data(&_msp_port, c); if (_msp_port.c_state == MSP_COMMAND_RECEIVED) { msp_process_received_command(); } } } } /* send an MSP packet */ void AP_MSP_Telem_Backend::msp_send_packet(uint16_t cmd, MSP::msp_version_e msp_version, const void *p, uint16_t size, bool is_request) { uint8_t out_buf[MSP_PORT_OUTBUF_SIZE]; msp_packet_t pkt = { .buf = { .ptr = out_buf, .end = MSP_ARRAYEND(out_buf), }, .cmd = (int16_t)cmd, .flags = 0, .result = 0, }; sbuf_write_data(&pkt.buf, p, size); sbuf_switch_to_reader(&pkt.buf, &out_buf[0]); msp_serial_encode(&_msp_port, &pkt, msp_version, is_request); } /* ported from betaflight/src/main/msp/msp_serial.c */ void AP_MSP_Telem_Backend::msp_process_received_command() { uint8_t out_buf[MSP_PORT_OUTBUF_SIZE]; msp_packet_t reply = { .buf = { .ptr = out_buf, .end = MSP_ARRAYEND(out_buf), }, .cmd = -1, .flags = 0, .result = 0, }; uint8_t *out_buf_head = reply.buf.ptr; msp_packet_t command = { .buf = { .ptr = _msp_port.in_buf, .end = _msp_port.in_buf + _msp_port.data_size, }, .cmd = (int16_t)_msp_port.cmd_msp, .flags = _msp_port.cmd_flags, .result = 0, }; const MSPCommandResult status = msp_process_command(&command, &reply); if (status != MSP_RESULT_NO_REPLY) { sbuf_switch_to_reader(&reply.buf, out_buf_head); // change streambuf direction msp_serial_encode(&_msp_port, &reply, _msp_port.msp_version); } _msp_port.c_state = MSP_IDLE; } /* ported from inav/src/main/fc/fc_msp.c */ MSPCommandResult AP_MSP_Telem_Backend::msp_process_command(msp_packet_t *cmd, msp_packet_t *reply) { MSPCommandResult ret = MSP_RESULT_ACK; sbuf_t *dst = &reply->buf; sbuf_t *src = &cmd->buf; const uint16_t cmd_msp = cmd->cmd; // initialize reply by default reply->cmd = cmd->cmd; if (MSP2_IS_SENSOR_MESSAGE(cmd_msp)) { ret = msp_process_sensor_command(cmd_msp, src); } else { ret = msp_process_out_command(cmd_msp, dst); } // Process DONT_REPLY flag if (cmd->flags & MSP_FLAG_DONT_REPLY) { ret = MSP_RESULT_NO_REPLY; } reply->result = ret; return ret; } MSPCommandResult AP_MSP_Telem_Backend::msp_process_out_command(uint16_t cmd_msp, sbuf_t *dst) { switch (cmd_msp) { case MSP_API_VERSION: return msp_process_out_api_version(dst); case MSP_FC_VARIANT: return msp_process_out_fc_variant(dst); case MSP_FC_VERSION: return msp_process_out_fc_version(dst); case MSP_BOARD_INFO: return msp_process_out_board_info(dst); case MSP_BUILD_INFO: return msp_process_out_build_info(dst); case MSP_NAME: return msp_process_out_name(dst); case MSP_OSD_CONFIG: return msp_process_out_osd_config(dst); case MSP_STATUS: case MSP_STATUS_EX: return msp_process_out_status(dst); case MSP_RAW_GPS: return msp_process_out_raw_gps(dst); case MSP_COMP_GPS: return msp_process_out_comp_gps(dst); case MSP_ATTITUDE: return msp_process_out_attitude(dst); case MSP_ALTITUDE: return msp_process_out_altitude(dst); case MSP_ANALOG: return msp_process_out_analog(dst); case MSP_BATTERY_STATE: return msp_process_out_battery_state(dst); case MSP_UID: return msp_process_out_uid(dst); #if HAL_WITH_ESC_TELEM case MSP_ESC_SENSOR_DATA: return msp_process_out_esc_sensor_data(dst); #endif case MSP_RTC: return msp_process_out_rtc(dst); case MSP_RC: return msp_process_out_rc(dst); default: // MSP always requires an ACK even for unsupported messages return MSP_RESULT_ACK; } } MSPCommandResult AP_MSP_Telem_Backend::msp_process_sensor_command(uint16_t cmd_msp, sbuf_t *src) { MSP_UNUSED(src); switch (cmd_msp) { case MSP2_SENSOR_RANGEFINDER: { const MSP::msp_rangefinder_data_message_t *pkt = (const MSP::msp_rangefinder_data_message_t *)src->ptr; msp_handle_rangefinder(*pkt); } break; case MSP2_SENSOR_OPTIC_FLOW: { const MSP::msp_opflow_data_message_t *pkt = (const MSP::msp_opflow_data_message_t *)src->ptr; msp_handle_opflow(*pkt); } break; case MSP2_SENSOR_GPS: { const MSP::msp_gps_data_message_t *pkt = (const MSP::msp_gps_data_message_t *)src->ptr; msp_handle_gps(*pkt); } break; case MSP2_SENSOR_COMPASS: { const MSP::msp_compass_data_message_t *pkt = (const MSP::msp_compass_data_message_t *)src->ptr; msp_handle_compass(*pkt); } break; case MSP2_SENSOR_BAROMETER: { const MSP::msp_baro_data_message_t *pkt = (const MSP::msp_baro_data_message_t *)src->ptr; msp_handle_baro(*pkt); } break; case MSP2_SENSOR_AIRSPEED: { const MSP::msp_airspeed_data_message_t *pkt = (const MSP::msp_airspeed_data_message_t *)src->ptr; msp_handle_airspeed(*pkt); } break; } return MSP_RESULT_NO_REPLY; } void AP_MSP_Telem_Backend::msp_handle_opflow(const MSP::msp_opflow_data_message_t &pkt) { #if HAL_MSP_OPTICALFLOW_ENABLED OpticalFlow *optflow = AP::opticalflow(); if (optflow == nullptr) { return; } optflow->handle_msp(pkt); #endif } void AP_MSP_Telem_Backend::msp_handle_rangefinder(const MSP::msp_rangefinder_data_message_t &pkt) { #if HAL_MSP_RANGEFINDER_ENABLED RangeFinder *rangefinder = AP::rangefinder(); if (rangefinder == nullptr) { return; } rangefinder->handle_msp(pkt); #endif } void AP_MSP_Telem_Backend::msp_handle_gps(const MSP::msp_gps_data_message_t &pkt) { #if HAL_MSP_GPS_ENABLED AP::gps().handle_msp(pkt); #endif } void AP_MSP_Telem_Backend::msp_handle_compass(const MSP::msp_compass_data_message_t &pkt) { #if HAL_MSP_COMPASS_ENABLED AP::compass().handle_msp(pkt); #endif } void AP_MSP_Telem_Backend::msp_handle_baro(const MSP::msp_baro_data_message_t &pkt) { #if HAL_MSP_BARO_ENABLED AP::baro().handle_msp(pkt); #endif } void AP_MSP_Telem_Backend::msp_handle_airspeed(const MSP::msp_airspeed_data_message_t &pkt) { #if HAL_MSP_AIRSPEED_ENABLED && AP_AIRSPEED_ENABLED auto *airspeed = AP::airspeed(); if (airspeed) { airspeed->handle_msp(pkt); } #endif } MSPCommandResult AP_MSP_Telem_Backend::msp_process_out_api_version(sbuf_t *dst) { const struct { uint8_t proto; uint8_t major; uint8_t minor; } api_version { proto : MSP_PROTOCOL_VERSION, major : API_VERSION_MAJOR, minor : API_VERSION_MINOR }; sbuf_write_data(dst, &api_version, sizeof(api_version)); return MSP_RESULT_ACK; } MSPCommandResult AP_MSP_Telem_Backend::msp_process_out_fc_version(sbuf_t *dst) { const struct { uint8_t major; uint8_t minor; uint8_t patch; } fc_version { major : FC_VERSION_MAJOR, minor : FC_VERSION_MINOR, patch : FC_VERSION_PATCH_LEVEL }; sbuf_write_data(dst, &fc_version, sizeof(fc_version)); return MSP_RESULT_ACK; } MSPCommandResult AP_MSP_Telem_Backend::msp_process_out_fc_variant(sbuf_t *dst) { sbuf_write_data(dst, "ARDU", FLIGHT_CONTROLLER_IDENTIFIER_LENGTH); return MSP_RESULT_ACK; } MSPCommandResult AP_MSP_Telem_Backend::msp_process_out_raw_gps(sbuf_t *dst) { #if OSD_ENABLED AP_OSD *osd = AP::osd(); if (osd == nullptr) { return MSP_RESULT_ERROR; } #endif gps_state_t gps_state; update_gps_state(gps_state); // handle airspeed override bool airspeed_en = false; #if OSD_ENABLED AP_MSP *msp = AP::msp(); if (msp == nullptr) { return MSP_RESULT_ERROR; } airspeed_en = osd->screen[msp->_msp_status.current_screen].aspeed.enabled; #endif if (airspeed_en) { airspeed_state_t airspeed_state; update_airspeed(airspeed_state); gps_state.speed_cms = airspeed_state.airspeed_estimate_ms * 100; // airspeed in cm/s } sbuf_write_data(dst, &gps_state, sizeof(gps_state)); return MSP_RESULT_ACK; } MSPCommandResult AP_MSP_Telem_Backend::msp_process_out_comp_gps(sbuf_t *dst) { home_state_t home_state; update_home_pos(home_state); // no need to apply yaw compensation, the DJI air unit will do it for us :-) uint16_t angle_deg = home_state.home_bearing_cd * 0.01; if (home_state.home_distance_m < 2) { //avoid fast rotating arrow at small distances angle_deg = 0; } const struct PACKED { uint16_t dist_home_m; uint16_t home_angle_deg; uint8_t toggle_gps; } gps { dist_home_m : uint16_t(constrain_int32(home_state.home_distance_m, 0, 0xFFFF)), home_angle_deg : angle_deg, toggle_gps : 1 }; sbuf_write_data(dst, &gps, sizeof(gps)); return MSP_RESULT_ACK; } // Autoscroll message is the same as in minimosd-extra. // Thanks to night-ghost for the approach. MSPCommandResult AP_MSP_Telem_Backend::msp_process_out_name(sbuf_t *dst) { #if OSD_ENABLED AP_OSD *osd = AP::osd(); if (osd == nullptr) { return MSP_RESULT_ERROR; } #endif AP_MSP *msp = AP::msp(); if (msp == nullptr) { return MSP_RESULT_ERROR; } AP_Notify * notify = AP_Notify::get_singleton(); if (notify) { uint16_t msgtime_ms = 10000; //default is 10 secs #if OSD_ENABLED msgtime_ms = AP::osd()->msgtime_s * 1000; #endif // text message is visible for _msp.msgtime_s but only if // a flight mode change did not steal focus const uint32_t visible_time_ms = AP_HAL::millis() - notify->get_text_updated_millis(); if (visible_time_ms < msgtime_ms && !msp->_msp_status.flight_mode_focus) { char buffer[NOTIFY_TEXT_BUFFER_SIZE]; strncpy(buffer, notify->get_text(), ARRAY_SIZE(buffer)); const uint8_t len = strnlen(buffer, ARRAY_SIZE(buffer)); for (uint8_t i=0; i MSP_TXT_VISIBLE_CHARS) { const uint8_t chars_to_scroll = len - MSP_TXT_VISIBLE_CHARS; const uint8_t total_cycles = 2*message_scroll_delay + 2*chars_to_scroll; const uint8_t current_cycle = (visible_time_ms / message_scroll_time_ms) % total_cycles; //calculate scroll start_position if (current_cycle < total_cycles/2) { //move to the left start_position = current_cycle - message_scroll_delay; } else { //move to the right start_position = total_cycles - current_cycle; } start_position = constrain_int16(start_position, 0, chars_to_scroll); uint8_t end_position = start_position + MSP_TXT_VISIBLE_CHARS; //ensure array boundaries start_position = MIN(start_position, int8_t(ARRAY_SIZE(buffer)-1)); end_position = MIN(end_position, int8_t(ARRAY_SIZE(buffer)-1)); //trim invisible part buffer[end_position] = 0; } sbuf_write_data(dst, buffer + start_position, strlen(buffer + start_position)); // max MSP_TXT_VISIBLE_CHARS chars general text... } else { bool wind_en = false; char flight_mode_str[MSP_TXT_BUFFER_SIZE]; #if OSD_ENABLED wind_en = osd->screen[msp->_msp_status.current_screen].wind.enabled; #endif update_flight_mode_str(flight_mode_str, ARRAY_SIZE(flight_mode_str), wind_en); sbuf_write_data(dst, flight_mode_str, ARRAY_SIZE(flight_mode_str)); // rendered as up to MSP_TXT_VISIBLE_CHARS chars with UTF8 support } } return MSP_RESULT_ACK; } MSPCommandResult AP_MSP_Telem_Backend::msp_process_out_status(sbuf_t *dst) { struct PACKED { uint16_t task_delta_time; uint16_t i2c_error_count; uint16_t sensor_status; uint32_t flight_mode_flags; uint8_t pid_profile; uint16_t system_load; uint16_t gyro_cycle_time; uint8_t box_mode_flags; uint8_t arming_disable_flags_count; uint32_t arming_disable_flags; uint8_t extra_flags; } status {}; status.flight_mode_flags = get_osd_flight_mode_bitmask(); status.arming_disable_flags_count = 1; status.arming_disable_flags = !AP::notify().flags.armed; sbuf_write_data(dst, &status, sizeof(status)); return MSP_RESULT_ACK; } MSPCommandResult AP_MSP_Telem_Backend::msp_process_out_osd_config(sbuf_t *dst) { #if OSD_ENABLED AP_OSD *osd = AP::osd(); if (osd == nullptr) { return MSP_RESULT_ERROR; } #endif const AP_MSP *msp = AP::msp(); if (msp == nullptr) { return MSP_RESULT_ERROR; } struct PACKED { uint8_t flags; uint8_t video_system; uint8_t units; uint8_t rssi_alarm; uint16_t capacity_alarm; uint8_t unused_0; uint8_t item_count; uint16_t alt_alarm; uint16_t items_position[OSD_ITEM_COUNT]; uint8_t stats_items_count; uint16_t stats_items[OSD_STAT_COUNT] ; uint8_t timers_count; uint16_t timers[OSD_TIMER_COUNT]; uint16_t enabled_warnings_old; uint8_t warnings_count_new; uint32_t enabled_warnings_new; uint8_t available_profiles; uint8_t selected_profile; uint8_t osd_stick_overlay; } osd_config {}; // Configuration osd_config.units = OSD_UNIT_METRIC; #if OSD_ENABLED osd_config.units = osd->units == AP_OSD::UNITS_METRIC ? OSD_UNIT_METRIC : OSD_UNIT_IMPERIAL; #endif // Alarms osd_config.rssi_alarm = msp->_osd_config.rssi_alarm; osd_config.capacity_alarm = msp->_osd_config.cap_alarm; osd_config.alt_alarm = msp->_osd_config.alt_alarm; // Reuse old timer alarm (U16) as OSD_ITEM_COUNT osd_config.item_count = OSD_ITEM_COUNT; // Element position and visibility uint16_t pos = 0; // default is hide this element for (uint8_t i = 0; i < OSD_ITEM_COUNT; i++) { pos = 0; // 0 is hide this item if (msp->_osd_item_settings[i] != nullptr) { // ok supported if (msp->_osd_item_settings[i]->enabled) { // ok enabled // let's check if we need to hide this dynamically if (!BIT_IS_SET(osd_hidden_items_bitmask, i)) { pos = MSP_OSD_POS(msp->_osd_item_settings[i]); } } } osd_config.items_position[i] = pos; } // Post flight statistics osd_config.stats_items_count = OSD_STAT_COUNT; // stats items count // Timers osd_config.timers_count = OSD_TIMER_COUNT; // timers // Enabled warnings // API < 1.41 // Send low word first for backwards compatibility osd_config.enabled_warnings_old = (uint16_t)(msp->_osd_config.enabled_warnings & 0xFFFF); // API >= 1.41 // Send the warnings count and 32bit enabled warnings flags. // Add currently active OSD profile (0 indicates OSD profiles not available). // Add OSD stick overlay mode (0 indicates OSD stick overlay not available). osd_config.warnings_count_new = OSD_WARNING_COUNT; osd_config.enabled_warnings_new = msp->_osd_config.enabled_warnings; // If the feature is not available there is only 1 profile and it's always selected osd_config.available_profiles = 1; osd_config.selected_profile = 1; sbuf_write_data(dst, &osd_config, sizeof(osd_config)); return MSP_RESULT_ACK; } MSPCommandResult AP_MSP_Telem_Backend::msp_process_out_attitude(sbuf_t *dst) { AP_AHRS &ahrs = AP::ahrs(); WITH_SEMAPHORE(ahrs.get_semaphore()); const struct PACKED { int16_t roll; int16_t pitch; int16_t yaw; } attitude { roll : int16_t(ahrs.roll_sensor * 0.1), // centidegress to decidegrees pitch : int16_t(ahrs.pitch_sensor * 0.1), // centidegress to decidegrees yaw : int16_t(ahrs.yaw_sensor * 0.01) // centidegress to degrees }; sbuf_write_data(dst, &attitude, sizeof(attitude)); return MSP_RESULT_ACK; } MSPCommandResult AP_MSP_Telem_Backend::msp_process_out_altitude(sbuf_t *dst) { home_state_t home_state; update_home_pos(home_state); const struct PACKED { int32_t rel_altitude_cm; // relative altitude cm int16_t vspeed_cms; // climb rate cm/s } altitude { rel_altitude_cm : home_state.rel_altitude_cm, vspeed_cms : int16_t(get_vspeed_ms() * 100) }; sbuf_write_data(dst, &altitude, sizeof(altitude)); return MSP_RESULT_ACK; } MSPCommandResult AP_MSP_Telem_Backend::msp_process_out_analog(sbuf_t *dst) { battery_state_t battery_state; update_battery_state(battery_state); float rssi; const struct PACKED { uint8_t voltage_dv; uint16_t mah; uint16_t rssi; int16_t current_ca; uint16_t voltage_cv; } analog { voltage_dv : (uint8_t)constrain_int16(battery_state.batt_voltage_v * 10, 0, 255), // battery voltage V to dV mah : (uint16_t)constrain_int32(battery_state.batt_consumed_mah, 0, 0xFFFF), // milliamp hours drawn from battery rssi : uint16_t(get_rssi(rssi) ? constrain_float(rssi,0,1) * 1023 : 0), // rssi 0-1 to 0-1023) current_ca : (int16_t)constrain_int32(battery_state.batt_current_a * 100, -0x8000, 0x7FFF), // current A to cA (0.01 steps, range is -320A to 320A) voltage_cv : (uint16_t)constrain_int32(battery_state.batt_voltage_v * 100,0,0xFFFF) // battery voltage in 0.01V steps }; sbuf_write_data(dst, &analog, sizeof(analog)); return MSP_RESULT_ACK; } MSPCommandResult AP_MSP_Telem_Backend::msp_process_out_battery_state(sbuf_t *dst) { const AP_MSP *msp = AP::msp(); if (msp == nullptr) { return MSP_RESULT_ERROR; } battery_state_t battery_state; update_battery_state(battery_state); const struct PACKED { uint8_t cellcount; uint16_t capacity_mah; uint8_t voltage_dv; uint16_t mah; int16_t current_ca; uint8_t state; uint16_t voltage_cv; } battery { cellcount : (uint8_t)constrain_int16((msp->_cellcount > 0 ? msp->_cellcount : battery_state.batt_cellcount), 0, 255), // cell count 0 indicates battery not detected. capacity_mah : (uint16_t)battery_state.batt_capacity_mah, // in mAh voltage_dv : (uint8_t)constrain_int16(battery_state.batt_voltage_v * 10, 0, 255), // battery voltage V to dV mah : (uint16_t)MIN(battery_state.batt_consumed_mah, 0xFFFF), // milliamp hours drawn from battery current_ca : (int16_t)constrain_int32(battery_state.batt_current_a * 100, -0x8000, 0x7FFF), // current A to cA (0.01 steps, range is -320A to 320A) state : (uint8_t)battery_state.batt_state, // BATTERY: OK=0, CRITICAL=2 voltage_cv : (uint16_t)constrain_int32(battery_state.batt_voltage_v * 100, 0, 0x7FFF) // battery voltage in 0.01V steps }; sbuf_write_data(dst, &battery, sizeof(battery)); return MSP_RESULT_ACK; } MSPCommandResult AP_MSP_Telem_Backend::msp_process_out_esc_sensor_data(sbuf_t *dst) { #if HAL_WITH_ESC_TELEM AP_ESC_Telem& telem = AP::esc_telem(); if (telem.get_last_telem_data_ms(0)) { struct PACKED { uint8_t num_motors; struct PACKED { uint8_t temp; uint16_t rpm; } data[ESC_TELEM_MAX_ESCS]; } esc_sensor {}; esc_sensor.num_motors = telem.get_num_active_escs(); for (uint8_t i = 0; i < esc_sensor.num_motors; i++) { int16_t temp = 0; float rpm = 0.0f; IGNORE_RETURN(telem.get_rpm(i, rpm)); IGNORE_RETURN(telem.get_temperature(i, temp)); esc_sensor.data[i].temp = uint8_t(temp * 0.01f); esc_sensor.data[i].rpm = uint16_t(rpm * 0.1f); } sbuf_write_data(dst, &esc_sensor, 1 + 3*esc_sensor.num_motors); } #endif return MSP_RESULT_ACK; } MSPCommandResult AP_MSP_Telem_Backend::msp_process_out_rtc(sbuf_t *dst) { tm localtime_tm {}; // year is relative to 1900 uint64_t time_usec = 0; if (AP::rtc().get_utc_usec(time_usec)) { // may fail, leaving time_unix at 0 const time_t time_sec = time_usec / 1000000; localtime_tm = *gmtime(&time_sec); } const struct PACKED { uint16_t year; uint8_t mon; uint8_t mday; uint8_t hour; uint8_t min; uint8_t sec; uint16_t millis; } rtc { year : uint16_t(localtime_tm.tm_year + 1900), // tm_year is relative to year 1900 mon : uint8_t(localtime_tm.tm_mon + 1), // MSP requires [1-12] months mday : uint8_t(localtime_tm.tm_mday), hour : uint8_t(localtime_tm.tm_hour), min : uint8_t(localtime_tm.tm_min), sec : uint8_t(localtime_tm.tm_sec), millis : uint16_t((time_usec / 1000U) % 1000U) }; sbuf_write_data(dst, &rtc, sizeof(rtc)); return MSP_RESULT_ACK; } MSPCommandResult AP_MSP_Telem_Backend::msp_process_out_rc(sbuf_t *dst) { const RCMapper* rcmap = AP::rcmap(); if (rcmap == nullptr) { return MSP_RESULT_ERROR; } uint16_t values[16] = {}; rc().get_radio_in(values, ARRAY_SIZE(values)); const struct PACKED { uint16_t a; uint16_t e; uint16_t r; uint16_t t; } rc { // send only 4 channels, MSP order is AERT // note: rcmap channels start at 1 a : values[rcmap->roll()-1], // A e : values[rcmap->pitch()-1], // E r : values[rcmap->yaw()-1], // R t : values[rcmap->throttle()-1] // T }; sbuf_write_data(dst, &rc, sizeof(rc)); return MSP_RESULT_ACK; } MSPCommandResult AP_MSP_Telem_Backend::msp_process_out_board_info(sbuf_t *dst) { const AP_FWVersion &fwver = AP::fwversion(); struct PACKED { uint16_t hw_revision; uint8_t aio_flags; uint8_t capabilities; uint8_t fw_string_len; } fw_info {}; #if HAL_WITH_OSD_BITMAP fw_info.aio_flags = 2; // 2 == FC with MAX7456 #else fw_info.aio_flags = 0; // 0 == FC without MAX7456 #endif fw_info.fw_string_len = strlen(fwver.fw_string); sbuf_write_data(dst, "ARDU", BOARD_IDENTIFIER_LENGTH); sbuf_write_data(dst, &fw_info, sizeof(fw_info)); sbuf_write_data(dst, fwver.fw_string, strlen(fwver.fw_string)); return MSP_RESULT_ACK; } MSPCommandResult AP_MSP_Telem_Backend::msp_process_out_build_info(sbuf_t *dst) { const AP_FWVersion &fwver = AP::fwversion(); // we don't use real dates here as that would mean we don't get // consistent builds. Being able to reproduce the exact build at a // later date is a valuable property of the code sbuf_write_data(dst, "Jan 01 1980", BUILD_DATE_LENGTH); sbuf_write_data(dst, "00:00:00", BUILD_TIME_LENGTH); sbuf_write_data(dst, fwver.fw_hash_str, GIT_SHORT_REVISION_LENGTH); return MSP_RESULT_ACK; } MSPCommandResult AP_MSP_Telem_Backend::msp_process_out_uid(sbuf_t *dst) { uint8_t id[12] {}; uint8_t len = sizeof(id); hal.util->get_system_id_unformatted(id, len); sbuf_write_data(dst, id, sizeof(id)); return MSP_RESULT_ACK; } void AP_MSP_Telem_Backend::hide_osd_items(void) { #if OSD_ENABLED AP_OSD *osd = AP::osd(); if (osd == nullptr) { return; } #endif AP_MSP *msp = AP::msp(); if (msp == nullptr) { return; } const AP_Notify ¬ify = AP::notify(); // clear all and only set the flashing ones BIT_CLEAR(osd_hidden_items_bitmask, OSD_GPS_SATS); BIT_CLEAR(osd_hidden_items_bitmask, OSD_HOME_DIR); BIT_CLEAR(osd_hidden_items_bitmask, OSD_HOME_DIST); BIT_CLEAR(osd_hidden_items_bitmask, OSD_GPS_SPEED); BIT_CLEAR(osd_hidden_items_bitmask, OSD_CRAFT_NAME); BIT_CLEAR(osd_hidden_items_bitmask, OSD_AVG_CELL_VOLTAGE); BIT_CLEAR(osd_hidden_items_bitmask, OSD_MAIN_BATT_VOLTAGE); BIT_CLEAR(osd_hidden_items_bitmask, OSD_RTC_DATETIME); BIT_CLEAR(osd_hidden_items_bitmask, OSD_RSSI_VALUE); if (msp->_msp_status.flashing_on) { // flash satcount when no 3D Fix gps_state_t gps_state; update_gps_state(gps_state); if (gps_state.fix_type == 0) { BIT_SET(osd_hidden_items_bitmask, OSD_GPS_SATS); } // flash home dir and distance if home is not set home_state_t home_state; update_home_pos(home_state); if (!home_state.home_is_set) { BIT_SET(osd_hidden_items_bitmask, OSD_HOME_DIR); BIT_SET(osd_hidden_items_bitmask, OSD_HOME_DIST); } // flash airspeed if there's no estimate bool airspeed_en = false; #if OSD_ENABLED airspeed_en = osd->screen[msp->_msp_status.current_screen].aspeed.enabled; #endif if (airspeed_en) { airspeed_state_t airspeed_state; update_airspeed(airspeed_state); if (!airspeed_state.airspeed_have_estimate) { BIT_SET(osd_hidden_items_bitmask, OSD_GPS_SPEED); } } // flash text flightmode for 3secs after each change if (msp->_msp_status.flight_mode_focus) { BIT_SET(osd_hidden_items_bitmask, OSD_CRAFT_NAME); } // flash battery on failsafe if (notify.flags.failsafe_battery) { BIT_SET(osd_hidden_items_bitmask, OSD_AVG_CELL_VOLTAGE); BIT_SET(osd_hidden_items_bitmask, OSD_MAIN_BATT_VOLTAGE); } // flash rtc if no time available uint64_t time_usec; if (!AP::rtc().get_utc_usec(time_usec)) { BIT_SET(osd_hidden_items_bitmask, OSD_RTC_DATETIME); } // flash rssi if disabled float rssi; if (!get_rssi(rssi)) { BIT_SET(osd_hidden_items_bitmask, OSD_RSSI_VALUE); } } // disable flashing for min/max items if (displaying_stats_screen()) { BIT_CLEAR(osd_hidden_items_bitmask, OSD_HOME_DIST); BIT_CLEAR(osd_hidden_items_bitmask, OSD_GPS_SPEED); BIT_CLEAR(osd_hidden_items_bitmask, OSD_CRAFT_NAME); BIT_CLEAR(osd_hidden_items_bitmask, OSD_MAIN_BATT_VOLTAGE); BIT_CLEAR(osd_hidden_items_bitmask, OSD_RSSI_VALUE); } } #if HAL_WITH_MSP_DISPLAYPORT // ported from betaflight/src/main/io/displayport_msp.c void AP_MSP_Telem_Backend::msp_displayport_heartbeat() { const uint8_t subcmd[] = { msp_displayport_subcmd_e::MSP_DISPLAYPORT_HEARTBEAT }; // heartbeat is used to: // a) ensure display is not released by remote OSD software // b) prevent OSD Slave boards from displaying a 'disconnected' status. msp_send_packet(MSP_DISPLAYPORT, MSP::MSP_V1, subcmd, sizeof(subcmd), false); } void AP_MSP_Telem_Backend::msp_displayport_grab() { msp_displayport_heartbeat(); } void AP_MSP_Telem_Backend::msp_displayport_release() { const uint8_t subcmd[] = { msp_displayport_subcmd_e::MSP_DISPLAYPORT_RELEASE }; msp_send_packet(MSP_DISPLAYPORT, MSP::MSP_V1, subcmd, sizeof(subcmd), false); } void AP_MSP_Telem_Backend::msp_displayport_clear_screen() { const uint8_t subcmd[] = { msp_displayport_subcmd_e::MSP_DISPLAYPORT_CLEAR_SCREEN }; msp_send_packet(MSP_DISPLAYPORT, MSP::MSP_V1, subcmd, sizeof(subcmd), false); } void AP_MSP_Telem_Backend::msp_displayport_draw_screen() { const uint8_t subcmd[] = { msp_displayport_subcmd_e::MSP_DISPLAYPORT_DRAW_SCREEN }; msp_send_packet(MSP_DISPLAYPORT, MSP::MSP_V1, subcmd, sizeof(subcmd), false); } void AP_MSP_Telem_Backend::msp_displayport_write_string(uint8_t col, uint8_t row, bool blink, const char *string) { const uint8_t len = strnlen(string, OSD_MSP_DISPLAYPORT_MAX_STRING_LENGTH); struct PACKED { uint8_t sub_cmd; uint8_t row; uint8_t col; uint8_t attr; uint8_t text[OSD_MSP_DISPLAYPORT_MAX_STRING_LENGTH]; } packet {}; packet.sub_cmd = msp_displayport_subcmd_e::MSP_DISPLAYPORT_WRITE_STRING; packet.row = row; packet.col = col; if (blink) { packet.attr |= DISPLAYPORT_MSP_ATTR_BLINK; } memcpy(packet.text, string, len); msp_send_packet(MSP_DISPLAYPORT, MSP::MSP_V1, &packet, 4 + len, false); } #endif //HAL_WITH_MSP_DISPLAYPORT bool AP_MSP_Telem_Backend::displaying_stats_screen() const { #if OSD_ENABLED AP_OSD *osd = AP::osd(); if (osd == nullptr) { return false; } AP_MSP *msp = AP::msp(); if (msp == nullptr) { return false; } return osd->screen[msp->_msp_status.current_screen].stat.enabled; #else return false; #endif } bool AP_MSP_Telem_Backend::get_rssi(float &rssi) const { AP_RSSI* ap_rssi = AP::rssi(); if (ap_rssi == nullptr) { return false; } if (!ap_rssi->enabled()) { return false; } rssi = ap_rssi->read_receiver_rssi(); // range is [0-1] return true; } #endif //HAL_MSP_ENABLED