// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-

#include "Plane.h"

#if LOGGING_ENABLED == ENABLED

#if CLI_ENABLED == ENABLED
// Code to Write and Read packets from DataFlash.log memory
// Code to interact with the user to dump or erase logs

// Creates a constant array of structs representing menu options
// and stores them in Flash memory, not RAM.
// User enters the string in the console to call the functions on the right.
// See class Menu in AP_Coommon for implementation details
static const struct Menu::command log_menu_commands[] PROGMEM = {
    {"dump",        MENU_FUNC(dump_log)},
    {"erase",       MENU_FUNC(erase_logs)},
    {"enable",      MENU_FUNC(select_logs)},
    {"disable",     MENU_FUNC(select_logs)}
};

// A Macro to create the Menu
MENU2(log_menu, "Log", log_menu_commands, FUNCTOR_BIND(&plane, &Plane::print_log_menu, bool));

bool Plane::print_log_menu(void)
{
    cliSerial->println_P(PSTR("logs enabled: "));

    if (0 == g.log_bitmask) {
        cliSerial->println_P(PSTR("none"));
    }else{
        // Macro to make the following code a bit easier on the eye.
        // Pass it the capitalised name of the log option, as defined
        // in defines.h but without the LOG_ prefix.  It will check for
        // the bit being set and print the name of the log option to suit.
 #define PLOG(_s) if (g.log_bitmask & MASK_LOG_ ## _s) cliSerial->printf_P(PSTR(" %S"), PSTR(# _s))
        PLOG(ATTITUDE_FAST);
        PLOG(ATTITUDE_MED);
        PLOG(GPS);
        PLOG(PM);
        PLOG(CTUN);
        PLOG(NTUN);
        PLOG(MODE);
        PLOG(IMU);
        PLOG(CMD);
        PLOG(CURRENT);
        PLOG(COMPASS);
        PLOG(TECS);
        PLOG(CAMERA);
        PLOG(RC);
        PLOG(SONAR);
 #undef PLOG
    }

    cliSerial->println();

    DataFlash.ListAvailableLogs(cliSerial);
    return(true);
}

int8_t Plane::dump_log(uint8_t argc, const Menu::arg *argv)
{
    int16_t dump_log_num;
    uint16_t dump_log_start;
    uint16_t dump_log_end;
    uint16_t last_log_num;

    // check that the requested log number can be read
    dump_log_num = argv[1].i;
    last_log_num = DataFlash.find_last_log();

    if (dump_log_num == -2) {
        DataFlash.DumpPageInfo(cliSerial);
        return(-1);
    } else if (dump_log_num <= 0) {
        cliSerial->printf_P(PSTR("dumping all\n"));
        Log_Read(0, 1, 0);
        return(-1);
    } else if ((argc != 2)
               || ((uint16_t)dump_log_num > last_log_num))
    {
        cliSerial->printf_P(PSTR("bad log number\n"));
        return(-1);
    }

    DataFlash.get_log_boundaries(dump_log_num, dump_log_start, dump_log_end);
    Log_Read((uint16_t)dump_log_num, dump_log_start, dump_log_end);
    return 0;
}

int8_t Plane::erase_logs(uint8_t argc, const Menu::arg *argv)
{
    in_mavlink_delay = true;
    do_erase_logs();
    in_mavlink_delay = false;
    return 0;
}

int8_t Plane::select_logs(uint8_t argc, const Menu::arg *argv)
{
    uint32_t bits;

    if (argc != 2) {
        cliSerial->printf_P(PSTR("missing log type\n"));
        return(-1);
    }

    bits = 0;

    // Macro to make the following code a bit easier on the eye.
    // Pass it the capitalised name of the log option, as defined
    // in defines.h but without the LOG_ prefix.  It will check for
    // that name as the argument to the command, and set the bit in
    // bits accordingly.
    //
    if (!strcasecmp_P(argv[1].str, PSTR("all"))) {
        bits = 0xFFFFFFFFUL;
    } else {
 #define TARG(_s)        if (!strcasecmp_P(argv[1].str, PSTR(# _s))) bits |= MASK_LOG_ ## _s
        TARG(ATTITUDE_FAST);
        TARG(ATTITUDE_MED);
        TARG(GPS);
        TARG(PM);
        TARG(CTUN);
        TARG(NTUN);
        TARG(MODE);
        TARG(IMU);
        TARG(CMD);
        TARG(CURRENT);
        TARG(COMPASS);
        TARG(TECS);
        TARG(CAMERA);
        TARG(RC);
        TARG(SONAR);
 #undef TARG
    }

    if (!strcasecmp_P(argv[0].str, PSTR("enable"))) {
        g.log_bitmask.set_and_save(g.log_bitmask | bits);
    }else{
        g.log_bitmask.set_and_save(g.log_bitmask & ~bits);
    }
    return(0);
}

int8_t Plane::process_logs(uint8_t argc, const Menu::arg *argv)
{
    log_menu.run();
    return 0;
}

#endif // CLI_ENABLED == ENABLED

void Plane::do_erase_logs(void)
{
    gcs_send_text_P(SEVERITY_LOW, PSTR("Erasing logs"));
    DataFlash.EraseAll();
    gcs_send_text_P(SEVERITY_LOW, PSTR("Log erase complete"));
}


// Write an attitude packet
void Plane::Log_Write_Attitude(void)
{
    Vector3f targets;       // Package up the targets into a vector for commonality with Copter usage of Log_Wrote_Attitude
    targets.x = nav_roll_cd;
    targets.y = nav_pitch_cd;
    targets.z = 0;          //Plane does not have the concept of navyaw. This is a placeholder.

    DataFlash.Log_Write_Attitude(ahrs, targets);
#if HAL_CPU_CLASS > HAL_CPU_CLASS_16
    DataFlash.Log_Write_PID(LOG_PIDR_MSG, rollController.get_pid_info());
    DataFlash.Log_Write_PID(LOG_PIDP_MSG, pitchController.get_pid_info());
#endif

#if AP_AHRS_NAVEKF_AVAILABLE
 #if OPTFLOW == ENABLED
    DataFlash.Log_Write_EKF(ahrs,optflow.enabled());
 #else
    DataFlash.Log_Write_EKF(ahrs,false);
 #endif
    DataFlash.Log_Write_AHRS2(ahrs);
#endif
#if CONFIG_HAL_BOARD == HAL_BOARD_SITL
    sitl.Log_Write_SIMSTATE(DataFlash);
#endif
    DataFlash.Log_Write_POS(ahrs);
}


struct PACKED log_Performance {
    LOG_PACKET_HEADER;
    uint64_t time_us;
    uint32_t loop_time;
    uint16_t main_loop_count;
    uint32_t g_dt_max;
    int16_t  gyro_drift_x;
    int16_t  gyro_drift_y;
    int16_t  gyro_drift_z;
    uint8_t  i2c_lockup_count;
    uint16_t ins_error_count;
};

// Write a performance monitoring packet. Total length : 19 bytes
void Plane::Log_Write_Performance()
{
    struct log_Performance pkt = {
        LOG_PACKET_HEADER_INIT(LOG_PERFORMANCE_MSG),
        time_us         : hal.scheduler->micros64(),
        loop_time       : millis() - perf_mon_timer,
        main_loop_count : mainLoop_count,
        g_dt_max        : G_Dt_max,
        gyro_drift_x    : (int16_t)(ahrs.get_gyro_drift().x * 1000),
        gyro_drift_y    : (int16_t)(ahrs.get_gyro_drift().y * 1000),
        gyro_drift_z    : (int16_t)(ahrs.get_gyro_drift().z * 1000),
        i2c_lockup_count: hal.i2c->lockup_count(),
        ins_error_count  : ins.error_count()
    };
    DataFlash.WriteBlock(&pkt, sizeof(pkt));
}

// Write a mission command. Total length : 36 bytes
void Plane::Log_Write_Cmd(const AP_Mission::Mission_Command &cmd)
{
    mavlink_mission_item_t mav_cmd = {};
    AP_Mission::mission_cmd_to_mavlink(cmd,mav_cmd);
    DataFlash.Log_Write_MavCmd(mission.num_commands(),mav_cmd);
}

struct PACKED log_Startup {
    LOG_PACKET_HEADER;
    uint64_t time_us;
    uint8_t startup_type;
    uint16_t command_total;
};

void Plane::Log_Write_Startup(uint8_t type)
{
    // Write all current parameters
    DataFlash.Log_Write_Parameters();

    struct log_Startup pkt = {
        LOG_PACKET_HEADER_INIT(LOG_STARTUP_MSG),
        time_us         : hal.scheduler->micros64(),
        startup_type    : type,
        command_total   : mission.num_commands()
    };
    DataFlash.WriteBlock(&pkt, sizeof(pkt));

    // write all commands to the dataflash as well
    if (should_log(MASK_LOG_CMD)) {
        Log_Write_EntireMission();
    }
}

void Plane::Log_Write_EntireMission()
{
    DataFlash.Log_Write_Message_P(PSTR("New mission"));

    AP_Mission::Mission_Command cmd;
    for (uint16_t i = 0; i < mission.num_commands(); i++) {
        if (mission.read_cmd_from_storage(i,cmd)) {
            Log_Write_Cmd(cmd);
        }
    }
}

struct PACKED log_Control_Tuning {
    LOG_PACKET_HEADER;
    uint64_t time_us;
    int16_t nav_roll_cd;
    int16_t roll;
    int16_t nav_pitch_cd;
    int16_t pitch;
    int16_t throttle_out;
    int16_t rudder_out;
    float   accel_y;
};

// Write a control tuning packet. Total length : 22 bytes
void Plane::Log_Write_Control_Tuning()
{
    Vector3f accel = ins.get_accel();
    struct log_Control_Tuning pkt = {
        LOG_PACKET_HEADER_INIT(LOG_CTUN_MSG),
        time_us         : hal.scheduler->micros64(),
        nav_roll_cd     : (int16_t)nav_roll_cd,
        roll            : (int16_t)ahrs.roll_sensor,
        nav_pitch_cd    : (int16_t)nav_pitch_cd,
        pitch           : (int16_t)ahrs.pitch_sensor,
        throttle_out    : (int16_t)channel_throttle->servo_out,
        rudder_out      : (int16_t)channel_rudder->servo_out,
        accel_y         : accel.y
    };
    DataFlash.WriteBlock(&pkt, sizeof(pkt));
}

// Write a TECS tuning packet
void Plane::Log_Write_TECS_Tuning(void)
{
    SpdHgt_Controller->log_data(DataFlash, LOG_TECS_MSG);
}

struct PACKED log_Nav_Tuning {
    LOG_PACKET_HEADER;
    uint64_t time_us;
    uint16_t yaw;
    float wp_distance;
    int16_t target_bearing_cd;
    int16_t nav_bearing_cd;
    int16_t altitude_error_cm;
    int16_t airspeed_cm;
    float   altitude;
    uint32_t groundspeed_cm;
};

// Write a navigation tuning packe
void Plane::Log_Write_Nav_Tuning()
{
    struct log_Nav_Tuning pkt = {
        LOG_PACKET_HEADER_INIT(LOG_NTUN_MSG),
        time_us             : hal.scheduler->micros64(),
        yaw                 : (uint16_t)ahrs.yaw_sensor,
        wp_distance         : auto_state.wp_distance,
        target_bearing_cd   : (int16_t)nav_controller->target_bearing_cd(),
        nav_bearing_cd      : (int16_t)nav_controller->nav_bearing_cd(),
        altitude_error_cm   : (int16_t)altitude_error_cm,
        airspeed_cm         : (int16_t)airspeed.get_airspeed_cm(),
        altitude            : barometer.get_altitude(),
        groundspeed_cm      : (uint32_t)(gps.ground_speed()*100)
    };
    DataFlash.WriteBlock(&pkt, sizeof(pkt));
}

struct PACKED log_Status {
    LOG_PACKET_HEADER;
    uint64_t time_us;
    uint8_t is_flying;
    float is_flying_probability;
    uint8_t armed;
    uint8_t safety;
};

void Plane::Log_Write_Status()
{
    struct log_Status pkt = {
        LOG_PACKET_HEADER_INIT(LOG_STATUS_MSG)
        ,time_us   : hal.scheduler->micros64()
        ,is_flying   : is_flying()
        ,is_flying_probability : isFlyingProbability
        ,armed       : hal.util->get_soft_armed()
        ,safety      : hal.util->safety_switch_state()
    };

    DataFlash.WriteBlock(&pkt, sizeof(pkt));
}

struct PACKED log_Sonar {
    LOG_PACKET_HEADER;
    uint64_t time_us;
    float distance;
    float voltage;
    float baro_alt;
    float groundspeed;
    uint8_t throttle;
    uint8_t count;
    float correction;
};

// Write a sonar packet
void Plane::Log_Write_Sonar()
{
#if RANGEFINDER_ENABLED == ENABLED
    struct log_Sonar pkt = {
        LOG_PACKET_HEADER_INIT(LOG_SONAR_MSG),
        time_us     : hal.scheduler->micros64(),
        distance    : (float)rangefinder.distance_cm(),
        voltage     : rangefinder.voltage_mv()*0.001f,
        baro_alt    : barometer.get_altitude(),
        groundspeed : gps.ground_speed(),
        throttle    : (uint8_t)(100 * channel_throttle->norm_output()),
        count       : rangefinder_state.in_range_count,
        correction  : rangefinder_state.correction
    };
    DataFlash.WriteBlock(&pkt, sizeof(pkt));
#endif
}

struct PACKED log_Optflow {
    LOG_PACKET_HEADER;
    uint64_t time_us;
    uint8_t surface_quality;
    float flow_x;
    float flow_y;
    float body_x;
    float body_y;
};

#if OPTFLOW == ENABLED
// Write an optical flow packet
void Plane::Log_Write_Optflow()
{
    // exit immediately if not enabled
    if (!optflow.enabled()) {
        return;
    }
    const Vector2f &flowRate = optflow.flowRate();
    const Vector2f &bodyRate = optflow.bodyRate();
    struct log_Optflow pkt = {
        LOG_PACKET_HEADER_INIT(LOG_OPTFLOW_MSG),
        time_us         : hal.scheduler->micros64(),
        surface_quality : optflow.quality(),
        flow_x           : flowRate.x,
        flow_y           : flowRate.y,
        body_x           : bodyRate.x,
        body_y           : bodyRate.y
    };
    DataFlash.WriteBlock(&pkt, sizeof(pkt));
}
#endif

struct PACKED log_Arm_Disarm {
    LOG_PACKET_HEADER;
    uint64_t time_us;
    uint8_t  arm_state;
    uint16_t arm_checks;
};

void Plane::Log_Write_Current()
{
    DataFlash.Log_Write_Current(battery, channel_throttle->control_in);

    // also write power status
    DataFlash.Log_Write_Power();
}

void Plane::Log_Arm_Disarm() {
    struct log_Arm_Disarm pkt = {
        LOG_PACKET_HEADER_INIT(LOG_ARM_DISARM_MSG),
        time_us                 : hal.scheduler->micros64(),
        arm_state               : arming.is_armed(),
        arm_checks              : arming.get_enabled_checks()      
    };
    DataFlash.WriteBlock(&pkt, sizeof(pkt));
}

void Plane::Log_Write_GPS(uint8_t instance)
{
    DataFlash.Log_Write_GPS(gps, instance, current_loc.alt - ahrs.get_home().alt);
}

void Plane::Log_Write_IMU() 
{
    DataFlash.Log_Write_IMU(ins);
}

void Plane::Log_Write_RC(void)
{
    DataFlash.Log_Write_RCIN();
    DataFlash.Log_Write_RCOUT();
}

void Plane::Log_Write_Baro(void)
{
    DataFlash.Log_Write_Baro(barometer);
}

// Write a AIRSPEED packet
void Plane::Log_Write_Airspeed(void)
{
    DataFlash.Log_Write_Airspeed(airspeed);
}

static const struct LogStructure log_structure[] PROGMEM = {
    LOG_COMMON_STRUCTURES,
    { LOG_PERFORMANCE_MSG, sizeof(log_Performance), 
      "PM",  "QIHIhhhBH", "TimeUS,LTime,MLC,gDt,GDx,GDy,GDz,I2CErr,INSErr" },
    { LOG_STARTUP_MSG, sizeof(log_Startup),         
      "STRT", "QBH",         "TimeUS,SType,CTot" },
    { LOG_CTUN_MSG, sizeof(log_Control_Tuning),     
      "CTUN", "Qcccchhf",    "TimeUS,NavRoll,Roll,NavPitch,Pitch,ThrOut,RdrOut,AccY" },
    { LOG_NTUN_MSG, sizeof(log_Nav_Tuning),         
      "NTUN", "QCfccccfI",   "TimeUS,Yaw,WpDist,TargBrg,NavBrg,AltErr,Arspd,Alt,GSpdCM" },
    { LOG_SONAR_MSG, sizeof(log_Sonar),             
      "SONR", "QffffBBf",   "TimeUS,DistCM,Volt,BaroAlt,GSpd,Thr,Cnt,Corr" },
    { LOG_ARM_DISARM_MSG, sizeof(log_Arm_Disarm),
      "ARM", "QHB", "TimeUS,ArmState,ArmChecks" },
    { LOG_ATRP_MSG, sizeof(AP_AutoTune::log_ATRP),
      "ATRP", "QBBcfff",  "TimeUS,Type,State,Servo,Demanded,Achieved,P" },
    { LOG_STATUS_MSG, sizeof(log_Status),
      "STAT", "QBfBB",  "TimeUS,isFlying,isFlyProb,Armed,Safety" },
#if OPTFLOW == ENABLED
    { LOG_OPTFLOW_MSG, sizeof(log_Optflow),
      "OF",   "QBffff",   "TimeUS,Qual,flowX,flowY,bodyX,bodyY" },
#endif
    TECS_LOG_FORMAT(LOG_TECS_MSG)
};

#if CLI_ENABLED == ENABLED
// Read the DataFlash.log memory : Packet Parser
void Plane::Log_Read(uint16_t log_num, int16_t start_page, int16_t end_page)
{
    cliSerial->printf_P(PSTR("\n" FIRMWARE_STRING
                             "\nFree RAM: %u\n"),
                        (unsigned)hal.util->available_memory());

    cliSerial->println_P(PSTR(HAL_BOARD_NAME));

	DataFlash.LogReadProcess(log_num, start_page, end_page,
                             FUNCTOR_BIND_MEMBER(&Plane::print_flight_mode, void, AP_HAL::BetterStream *, uint8_t),
                             cliSerial);
}
#endif // CLI_ENABLED

// start a new log
void Plane::start_logging() 
{
    DataFlash.StartNewLog();
    DataFlash.Log_Write_Message_P(PSTR(FIRMWARE_STRING));
#if defined(PX4_GIT_VERSION) && defined(NUTTX_GIT_VERSION)
    DataFlash.Log_Write_Message_P(PSTR("PX4: " PX4_GIT_VERSION " NuttX: " NUTTX_GIT_VERSION));
#endif

    // write system identifier as well if available
    char sysid[40];
    if (hal.util->get_system_id(sysid)) {
        DataFlash.Log_Write_Message(sysid);
    }
}

/*
  initialise logging subsystem
 */
void Plane::log_init(void)
{
    DataFlash.Init(log_structure, sizeof(log_structure)/sizeof(log_structure[0]));
    if (!DataFlash.CardInserted()) {
        gcs_send_text_P(SEVERITY_LOW, PSTR("No dataflash card inserted"));
        g.log_bitmask.set(0);
    } else if (DataFlash.NeedErase()) {
        gcs_send_text_P(SEVERITY_LOW, PSTR("ERASING LOGS"));
        do_erase_logs();
        for (uint8_t i=0; i<num_gcs; i++) {
            gcs[i].reset_cli_timeout();
        }
    }
    arming.set_logging_available(DataFlash.CardInserted());
}

#else // LOGGING_ENABLED

int8_t Plane::process_logs(uint8_t argc, const Menu::arg *argv) 
{
    return 0;
}


#endif // LOGGING_ENABLED