#pragma once

#include <AP_Common/AP_Common.h>
#include <AP_Param/AP_Param.h>
#include <AP_Math/AP_Math.h>
#include <AP_TemperatureSensor/AP_TemperatureSensor_config.h>
#include <GCS_MAVLink/GCS_MAVLink.h>
#include "AP_BattMonitor_Params.h"
#include "AP_BattMonitor_config.h"

// maximum number of battery monitors
#ifndef AP_BATT_MONITOR_MAX_INSTANCES
#define AP_BATT_MONITOR_MAX_INSTANCES       9
#endif

// first monitor is always the primary monitor
#define AP_BATT_PRIMARY_INSTANCE            0

#define AP_BATT_SERIAL_NUMBER_DEFAULT       -1

#define AP_BATT_MONITOR_TIMEOUT             5000

#define AP_BATT_MONITOR_RES_EST_TC_1        0.5f
#define AP_BATT_MONITOR_RES_EST_TC_2        0.1f

#if !HAL_MINIMIZE_FEATURES && BOARD_FLASH_SIZE > 1024
#define AP_BATT_MONITOR_CELLS_MAX           14
#else
#define AP_BATT_MONITOR_CELLS_MAX           12
#endif

// declare backend class
class AP_BattMonitor_Backend;
class AP_BattMonitor_Analog;
class AP_BattMonitor_SMBus;
class AP_BattMonitor_SMBus_Solo;
class AP_BattMonitor_SMBus_Generic;
class AP_BattMonitor_SMBus_Maxell;
class AP_BattMonitor_SMBus_Rotoye;
class AP_BattMonitor_DroneCAN;
class AP_BattMonitor_Generator;
class AP_BattMonitor_INA2XX;
class AP_BattMonitor_INA239;
class AP_BattMonitor_LTC2946;
class AP_BattMonitor_Torqeedo;
class AP_BattMonitor_FuelLevel_Analog;
class AP_BattMonitor_EFI;


class AP_BattMonitor
{
    friend class AP_BattMonitor_Backend;
    friend class AP_BattMonitor_Analog;
    friend class AP_BattMonitor_SMBus;
    friend class AP_BattMonitor_SMBus_Solo;
    friend class AP_BattMonitor_SMBus_Generic;
    friend class AP_BattMonitor_SMBus_Maxell;
    friend class AP_BattMonitor_SMBus_Rotoye;
    friend class AP_BattMonitor_DroneCAN;
    friend class AP_BattMonitor_Sum;
    friend class AP_BattMonitor_FuelFlow;
    friend class AP_BattMonitor_FuelLevel_PWM;
    friend class AP_BattMonitor_Generator;
    friend class AP_BattMonitor_EFI;
    friend class AP_BattMonitor_INA2XX;
    friend class AP_BattMonitor_INA239;
    friend class AP_BattMonitor_LTC2946;

    friend class AP_BattMonitor_Torqeedo;
    friend class AP_BattMonitor_FuelLevel_Analog;
    friend class AP_BattMonitor_Synthetic_Current;

public:

    // battery failsafes must be defined in levels of severity so that vehicles wont fall backwards
    enum class Failsafe : uint8_t {
        None = 0,
        Low,
        Critical
    };

    // Battery monitor driver types
    enum class Type {
        NONE                           = 0,
        ANALOG_VOLTAGE_ONLY            = 3,
        ANALOG_VOLTAGE_AND_CURRENT     = 4,
        SOLO                           = 5,
        BEBOP                          = 6,
        SMBus_Generic                  = 7,
        UAVCAN_BatteryInfo             = 8,
        BLHeliESC                      = 9,
        Sum                            = 10,
        FuelFlow                       = 11,
        FuelLevel_PWM                  = 12,
        SUI3                           = 13,
        SUI6                           = 14,
        NeoDesign                      = 15,
        MAXELL                         = 16,
        GENERATOR_ELEC                 = 17,
        GENERATOR_FUEL                 = 18,
        Rotoye                         = 19,
        // 20 was MPPT_PacketDigital
        INA2XX                         = 21,
        LTC2946                        = 22,
        Torqeedo                       = 23,
        FuelLevel_Analog               = 24,
        Analog_Volt_Synthetic_Current  = 25,
        INA239_SPI                     = 26,
        EFI                            = 27,
    };

    FUNCTOR_TYPEDEF(battery_failsafe_handler_fn_t, void, const char *, const int8_t);

    AP_BattMonitor(uint32_t log_battery_bit, battery_failsafe_handler_fn_t battery_failsafe_handler_fn, const int8_t *failsafe_priorities);

    /* Do not allow copies */
    CLASS_NO_COPY(AP_BattMonitor);

    static AP_BattMonitor *get_singleton() {
        return _singleton;
    }

    // cell voltages in millivolts
    struct cells {
        uint16_t cells[AP_BATT_MONITOR_CELLS_MAX];
    };

    // The BattMonitor_State structure is filled in by the backend driver
    struct BattMonitor_State {
        cells       cell_voltages;             // battery cell voltages in millivolts, 10 cells matches the MAVLink spec
        float       voltage;                   // voltage in volts
        float       current_amps;              // current in amperes
        float       consumed_mah;              // total current draw in milliamp hours since start-up
        float       consumed_wh;               // total energy consumed in Wh since start-up
        uint32_t    last_time_micros;          // time when voltage and current was last read in microseconds
        uint32_t    low_voltage_start_ms;      // time when voltage dropped below the minimum in milliseconds
        uint32_t    critical_voltage_start_ms; // critical voltage failsafe start timer in milliseconds
        float       temperature;               // battery temperature in degrees Celsius
#if AP_TEMPERATURE_SENSOR_ENABLED
        bool        temperature_external_use;
        float       temperature_external;      // battery temperature set by an external source in degrees Celsius
#endif
        uint32_t    temperature_time;          // timestamp of the last received temperature message
        float       voltage_resting_estimate;  // voltage with sag removed based on current and resistance estimate in Volt
        float       resistance;                // resistance, in Ohms, calculated by comparing resting voltage vs in flight voltage
        Failsafe failsafe;                     // stage failsafe the battery is in
        bool        healthy;                   // battery monitor is communicating correctly
        bool        is_powering_off;           // true when power button commands power off
        bool        powerOffNotified;          // only send powering off notification once
        uint32_t    time_remaining;            // remaining battery time
        bool        has_time_remaining;        // time_remaining is only valid if this is true
        uint8_t     instance;                  // instance number of this backend
        const struct AP_Param::GroupInfo *var_info;
    };

    static const struct AP_Param::GroupInfo *backend_var_info[AP_BATT_MONITOR_MAX_INSTANCES];

    // Return the number of battery monitor instances
    uint8_t num_instances(void) const { return _num_instances; }

    // detect and initialise any available battery monitors
    void init();

    /// Read the battery voltage and current for all batteries.  Should be called at 10hz
    void read();

    // healthy - returns true if monitor is functioning
    bool healthy(uint8_t instance) const;

    // return true if all configured battery monitors are healthy
    bool healthy() const;

    /// voltage - returns battery voltage in volts
    float voltage(uint8_t instance) const;
    float voltage() const { return voltage(AP_BATT_PRIMARY_INSTANCE); }

    // voltage for a GCS, may be resistance compensated
    float gcs_voltage(uint8_t instance) const;
    float gcs_voltage(void) const { return gcs_voltage(AP_BATT_PRIMARY_INSTANCE); }

    /// get voltage with sag removed (based on battery current draw and resistance)
    /// this will always be greater than or equal to the raw voltage
    float voltage_resting_estimate(uint8_t instance) const;
    float voltage_resting_estimate() const { return voltage_resting_estimate(AP_BATT_PRIMARY_INSTANCE); }

    /// current_amps - returns the instantaneous current draw in amperes
    bool current_amps(float &current, const uint8_t instance = AP_BATT_PRIMARY_INSTANCE) const WARN_IF_UNUSED;

    /// consumed_mah - returns total current drawn since start-up in milliampere.hours
    bool consumed_mah(float &mah, const uint8_t instance = AP_BATT_PRIMARY_INSTANCE) const WARN_IF_UNUSED;

    /// consumed_wh - returns total energy drawn since start-up in watt.hours
    bool consumed_wh(float&wh, const uint8_t instance = AP_BATT_PRIMARY_INSTANCE) const WARN_IF_UNUSED;

    /// capacity_remaining_pct - returns true if the percentage is valid and writes to percentage argument
    virtual bool capacity_remaining_pct(uint8_t &percentage, uint8_t instance) const WARN_IF_UNUSED;
    bool capacity_remaining_pct(uint8_t &percentage) const WARN_IF_UNUSED { return capacity_remaining_pct(percentage, AP_BATT_PRIMARY_INSTANCE); }

    /// time_remaining - returns remaining battery time
    bool time_remaining(uint32_t &seconds, const uint8_t instance = AP_BATT_PRIMARY_INSTANCE) const WARN_IF_UNUSED;

    /// pack_capacity_mah - returns the capacity of the battery pack in mAh when the pack is full
    int32_t pack_capacity_mah(uint8_t instance) const;
    int32_t pack_capacity_mah() const { return pack_capacity_mah(AP_BATT_PRIMARY_INSTANCE); }
 
    /// returns true if a battery failsafe has ever been triggered
    bool has_failsafed(void) const { return _has_triggered_failsafe; };

    /// returns the highest failsafe action that has been triggered
    int8_t get_highest_failsafe_priority(void) const { return _highest_failsafe_priority; };

    /// get_type - returns battery monitor type
    enum Type get_type() const { return get_type(AP_BATT_PRIMARY_INSTANCE); }
    enum Type get_type(uint8_t instance) const {
        return (Type)_params[instance]._type.get();
    }

    /// get_serial_number - returns battery serial number
    int32_t get_serial_number() const { return get_serial_number(AP_BATT_PRIMARY_INSTANCE); }
    int32_t get_serial_number(uint8_t instance) const {
        return _params[instance]._serial_number;
    }

    /// true when (voltage * current) > watt_max
    bool overpower_detected() const;
    bool overpower_detected(uint8_t instance) const;

    // cell voltages in millivolts
    bool has_cell_voltages() const { return has_cell_voltages(AP_BATT_PRIMARY_INSTANCE); }
    bool has_cell_voltages(const uint8_t instance) const;
    const cells &get_cell_voltages() const { return get_cell_voltages(AP_BATT_PRIMARY_INSTANCE); }
    const cells &get_cell_voltages(const uint8_t instance) const;

    // temperature
    bool get_temperature(float &temperature) const { return get_temperature(temperature, AP_BATT_PRIMARY_INSTANCE); }
    bool get_temperature(float &temperature, const uint8_t instance) const;
#if AP_TEMPERATURE_SENSOR_ENABLED
    bool set_temperature(const float temperature, const uint8_t instance);
    bool set_temperature_by_serial_number(const float temperature, const int32_t serial_number);
#endif

    // MPPT Control (Solar panels)
    void MPPT_set_powered_state_to_all(const bool power_on);
    void MPPT_set_powered_state(const uint8_t instance, const bool power_on);

    // cycle count
    bool get_cycle_count(uint8_t instance, uint16_t &cycles) const;

    // get battery resistance estimate in ohms
    float get_resistance() const { return get_resistance(AP_BATT_PRIMARY_INSTANCE); }
    float get_resistance(uint8_t instance) const { return state[instance].resistance; }

    // returns false if we fail arming checks, in which case the buffer will be populated with a failure message
    bool arming_checks(size_t buflen, char *buffer) const;

    // sends powering off mavlink broadcasts and sets notify flag
    void checkPoweringOff(void);

    // reset battery remaining percentage
    bool reset_remaining_mask(uint16_t battery_mask, float percentage);
    bool reset_remaining(uint8_t instance, float percentage) { return reset_remaining_mask(1U<<instance, percentage);}

    // Returns mavlink charge state
    MAV_BATTERY_CHARGE_STATE get_mavlink_charge_state(const uint8_t instance) const;

    // Returns mavlink fault state
    uint32_t get_mavlink_fault_bitmask(const uint8_t instance) const;

    static const struct AP_Param::GroupInfo var_info[];

protected:

    /// parameters
    AP_BattMonitor_Params _params[AP_BATT_MONITOR_MAX_INSTANCES];

private:
    static AP_BattMonitor *_singleton;

    BattMonitor_State state[AP_BATT_MONITOR_MAX_INSTANCES];
    AP_BattMonitor_Backend *drivers[AP_BATT_MONITOR_MAX_INSTANCES];
    uint32_t    _log_battery_bit;
    uint8_t     _num_instances;                                     /// number of monitors

    void convert_dynamic_param_groups(uint8_t instance);

    /// returns the failsafe state of the battery
    Failsafe check_failsafe(const uint8_t instance);
    void check_failsafes(void); // checks all batteries failsafes

    battery_failsafe_handler_fn_t _battery_failsafe_handler_fn;
    const int8_t *_failsafe_priorities; // array of failsafe priorities, sorted highest to lowest priority, -1 indicates no more entries

    int8_t      _highest_failsafe_priority; // highest selected failsafe action level (used to restrict what actions we move into)
    bool        _has_triggered_failsafe;  // true after a battery failsafe has been triggered for the first time

};

namespace AP {
    AP_BattMonitor &battery();
};