// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: t -*-

// Code to Write and Read packets from DataFlash log memory
// Code to interact with the user to dump or erase logs

#define HEAD_BYTE1 0xA3    // Decimal 163
#define HEAD_BYTE2 0x95    // Decimal 149
#define END_BYTE 0xBA      // Decimal 186


// These are function definitions so the Menu can be constructed before the functions
// are defined below. Order matters to the compiler.
static int8_t	print_log_menu(uint8_t argc, 	const Menu::arg *argv);
static int8_t	dump_log(uint8_t argc, 			const Menu::arg *argv);
static int8_t	erase_logs(uint8_t argc, 		const Menu::arg *argv);
static int8_t	select_logs(uint8_t argc, 		const Menu::arg *argv);

// This is the help function
// PSTR is an AVR macro to read strings from flash memory
// printf_P is a version of print_f that reads from flash memory
static int8_t	help_log(uint8_t argc, 			const Menu::arg *argv)
{
	Serial.printf_P(PSTR("\n"
						 "Commands:\n"
						 "  dump <n>             dump log <n>\n"
						 "  erase                erase all logs\n"
						 "  enable <name>|all    enable logging <name> or everything\n"
						 "  disable <name>|all   disable logging <name> or everything\n"
						 "\n"));
}

// Creates a constant array of structs representing menu options
// and stores them in Flash memory, not RAM.
// User enters the string in the console to call the functions on the right.
// See class Menu in AP_Coommon for implementation details
const struct Menu::command log_menu_commands[] PROGMEM = {
	{"dump",	dump_log},
	{"erase",	erase_logs},
	{"enable",	select_logs},
	{"disable",	select_logs},
	{"help",	help_log}
};

// A Macro to create the Menu
MENU2(log_menu, "Log", log_menu_commands, print_log_menu);

static bool
print_log_menu(void)
{
	int log_start;
	int log_end;
	byte last_log_num = get_num_logs();

	Serial.printf_P(PSTR("logs enabled: "));
	if (0 == g.log_bitmask) {
		Serial.printf_P(PSTR("none"));
	} else {
		// Macro to make the following code a bit easier on the eye.
		// Pass it the capitalised name of the log option, as defined
		// in defines.h but without the LOG_ prefix.  It will check for
		// the bit being set and print the name of the log option to suit.
#define PLOG(_s)	if (g.log_bitmask & LOGBIT_ ## _s) Serial.printf_P(PSTR(" %S"), PSTR(#_s))
		PLOG(ATTITUDE_FAST);
		PLOG(ATTITUDE_MED);
		PLOG(GPS);
		PLOG(PM);
		PLOG(CTUN);
		PLOG(NTUN);
		PLOG(MODE);
		PLOG(RAW);
		PLOG(CMD);
		PLOG(CURRENT);
#undef PLOG
	}
	Serial.println();

	if (last_log_num == 0) {
		Serial.printf_P(PSTR("\nNo logs available for download\n"));
	} else {

		Serial.printf_P(PSTR("\n%d logs available for download\n"), last_log_num);
		for(int i=1;i<last_log_num+1;i++) {
			get_log_boundaries(last_log_num, i, log_start, log_end);
			Serial.printf_P(PSTR("Log number %d,    start page %d,   end page %d\n"),
							i, log_start, log_end);
		}
		Serial.println();
	}
	return(true);
}

static int8_t
dump_log(uint8_t argc, const Menu::arg *argv)
{
	byte dump_log;
	int dump_log_start;
	int dump_log_end;
	byte last_log_num;

	// check that the requested log number can be read
	dump_log = argv[1].i;
	last_log_num = get_num_logs();
	if ((argc != 2) || (dump_log < 1) || (dump_log > last_log_num)) {
		Serial.printf_P(PSTR("bad log number\n"));
		return(-1);
	}

	get_log_boundaries(last_log_num, dump_log, dump_log_start, dump_log_end);
	Serial.printf_P(PSTR("Dumping Log number %d,    start page %d,   end page %d\n"),
				  dump_log, dump_log_start, dump_log_end);
	Log_Read(dump_log_start, dump_log_end);
	Serial.printf_P(PSTR("Log read complete\n"));
}

static int8_t
erase_logs(uint8_t argc, const Menu::arg *argv)
{
	for(int i = 10 ; i > 0; i--) {
		Serial.printf_P(PSTR("ATTENTION - Erasing log in %d seconds.  Power off now to save log! \n"), i);
		delay(1000);
	}
	Serial.printf_P(PSTR("\nErasing log...\n"));
	for(int j = 1; j < 4096; j++)
		DataFlash.PageErase(j);
	DataFlash.StartWrite(1);
	DataFlash.WriteByte(HEAD_BYTE1);
	DataFlash.WriteByte(HEAD_BYTE2);
	DataFlash.WriteByte(LOG_INDEX_MSG);
	DataFlash.WriteByte(0);
	DataFlash.WriteByte(END_BYTE);
	Serial.printf_P(PSTR("\nLog erased.\n"));
}

static int8_t
select_logs(uint8_t argc, const Menu::arg *argv)
{
	uint16_t	bits;

	if (argc != 2) {
		Serial.printf_P(PSTR("missing log type\n"));
		return(-1);
	}

	bits = 0;

	// Macro to make the following code a bit easier on the eye.
	// Pass it the capitalised name of the log option, as defined
	// in defines.h but without the LOG_ prefix.  It will check for
	// that name as the argument to the command, and set the bit in
	// bits accordingly.
	//
	if (!strcasecmp_P(argv[1].str, PSTR("all"))) {
		bits = ~(bits = 0);
	} else {
#define TARG(_s)	if (!strcasecmp_P(argv[1].str, PSTR(#_s))) bits |= LOGBIT_ ## _s
		TARG(ATTITUDE_FAST);
		TARG(ATTITUDE_MED);
		TARG(GPS);
		TARG(PM);
		TARG(CTUN);
		TARG(NTUN);
		TARG(MODE);
		TARG(RAW);
		TARG(CMD);
		TARG(CURRENT);
#undef TARG
	}

	if (!strcasecmp_P(argv[0].str, PSTR("enable"))) {
		g.log_bitmask.set_and_save(g.log_bitmask | bits);
	} else {
		g.log_bitmask.set_and_save(g.log_bitmask & ~bits);
	}
	return(0);
}

int8_t
process_logs(uint8_t argc, const Menu::arg *argv)
{
	log_menu.run();
}


byte get_num_logs(void)
{
	int page = 1;
	byte data;
	byte log_step = 0;

	DataFlash.StartRead(1);
	while (page == 1) {
		data = DataFlash.ReadByte();
		switch(log_step)		 //This is a state machine to read the packets
			{
			case 0:
				if(data==HEAD_BYTE1)	// Head byte 1
					log_step++;
				break;
			case 1:
				if(data==HEAD_BYTE2)	// Head byte 2
					log_step++;
				else
					log_step = 0;
				break;
			case 2:
				if(data==LOG_INDEX_MSG){
					byte num_logs = DataFlash.ReadByte();
					return num_logs;
				} else {
						log_step=0;	 // Restart, we have a problem...
				}
				break;
			}
		page = DataFlash.GetPage();
	}
	return 0;
}

void start_new_log(byte num_existing_logs)
{
	int page;
	int start_pages[50] = {0,0,0};
	int end_pages[50]	= {0,0,0};
	byte data;

	if(num_existing_logs > 0) {
		for(int i=0;i<num_existing_logs;i++) {
			get_log_boundaries(num_existing_logs, i+1,start_pages[i],end_pages[i]);
		}
		end_pages[num_existing_logs - 1] = find_last_log_page(start_pages[num_existing_logs - 1]);
	}

	if(end_pages[num_existing_logs - 1] < 4095 && num_existing_logs < MAX_NUM_LOGS) {
		if(num_existing_logs > 0)
			start_pages[num_existing_logs] = end_pages[num_existing_logs - 1] + 1;
		else
			start_pages[0] = 2;
		num_existing_logs++;
		DataFlash.StartWrite(1);
		DataFlash.WriteByte(HEAD_BYTE1);
		DataFlash.WriteByte(HEAD_BYTE2);
		DataFlash.WriteByte(LOG_INDEX_MSG);
		DataFlash.WriteByte(num_existing_logs);
		for(int i=0;i<MAX_NUM_LOGS;i++) {
			DataFlash.WriteInt(start_pages[i]);
			DataFlash.WriteInt(end_pages[i]);
		}
		DataFlash.WriteByte(END_BYTE);
		DataFlash.FinishWrite();
		DataFlash.StartWrite(start_pages[num_existing_logs-1]);
	} else {
		gcs.send_text(SEVERITY_LOW,"<start_new_log> Logs full - logging discontinued");
	}
}

void get_log_boundaries(byte num_logs, byte log_num, int & start_page, int & end_page)
{
	int page 		= 1;
	byte data;
	byte log_step	= 0;

	DataFlash.StartRead(1);
	while (page = 1) {
		data = DataFlash.ReadByte();
		switch(log_step)		 //This is a state machine to read the packets
			{
			case 0:
				if(data==HEAD_BYTE1)	// Head byte 1
					log_step++;
				break;
			case 1:
				if(data==HEAD_BYTE2)	// Head byte 2
					log_step++;
				else
					log_step = 0;
				break;
			case 2:
				if(data==LOG_INDEX_MSG){
					byte num_logs = DataFlash.ReadByte();
					for(int i=0;i<log_num;i++) {
						start_page = DataFlash.ReadInt();
						end_page = DataFlash.ReadInt();
					}
					if(log_num==num_logs)
						end_page = find_last_log_page(start_page);

					return;		// This is the normal exit point
				} else {
						log_step=0;	 // Restart, we have a problem...
				}
				break;
			}
		page = DataFlash.GetPage();
	}
	//  Error condition if we reach here with page = 2   TO DO - report condition
}

int find_last_log_page(int bottom_page)
{
	int top_page = 4096;
	int look_page;
	long check;

	while((top_page - bottom_page) > 1) {
		look_page = (top_page + bottom_page) / 2;
		DataFlash.StartRead(look_page);
		check = DataFlash.ReadLong();
		if(check == 0xFFFFFFFF)
			top_page = look_page;
		else
			bottom_page = look_page;
	}
	return top_page;
}


// Write an attitude packet. Total length : 10 bytes
void Log_Write_Attitude(int log_roll, int log_pitch, uint16_t log_yaw)
{
	DataFlash.WriteByte(HEAD_BYTE1);
	DataFlash.WriteByte(HEAD_BYTE2);
	DataFlash.WriteByte(LOG_ATTITUDE_MSG);
	DataFlash.WriteInt(log_roll);
	DataFlash.WriteInt(log_pitch);
	DataFlash.WriteInt(log_yaw);
	DataFlash.WriteByte(END_BYTE);
}

// Write a performance monitoring packet. Total length : 19 bytes
void Log_Write_Performance()
{
	DataFlash.WriteByte(HEAD_BYTE1);
	DataFlash.WriteByte(HEAD_BYTE2);
	DataFlash.WriteByte(LOG_PERFORMANCE_MSG);
	DataFlash.WriteLong(millis()- perf_mon_timer);
	DataFlash.WriteInt(mainLoop_count);
	DataFlash.WriteInt(G_Dt_max);
	DataFlash.WriteByte(dcm.gyro_sat_count);
	DataFlash.WriteByte(imu.adc_constraints);
	DataFlash.WriteByte(dcm.renorm_sqrt_count);
	DataFlash.WriteByte(dcm.renorm_blowup_count);
	DataFlash.WriteByte(gps_fix_count);
	DataFlash.WriteInt((int)(dcm.get_health() * 1000));
	DataFlash.WriteByte(END_BYTE);
}

// Write a command processing packet. Total length : 19 bytes
//void Log_Write_Cmd(byte num, byte id, byte p1, long alt, long lat, long lng)
void Log_Write_Cmd(byte num, struct Location *wp)
{
	DataFlash.WriteByte(HEAD_BYTE1);
	DataFlash.WriteByte(HEAD_BYTE2);
	DataFlash.WriteByte(LOG_CMD_MSG);
	DataFlash.WriteByte(num);
	DataFlash.WriteByte(wp->id);
	DataFlash.WriteByte(wp->p1);
	DataFlash.WriteLong(wp->alt);
	DataFlash.WriteLong(wp->lat);
	DataFlash.WriteLong(wp->lng);
	DataFlash.WriteByte(END_BYTE);
}

void Log_Write_Startup(byte type)
{
	DataFlash.WriteByte(HEAD_BYTE1);
	DataFlash.WriteByte(HEAD_BYTE2);
	DataFlash.WriteByte(LOG_STARTUP_MSG);
	DataFlash.WriteByte(type);
	DataFlash.WriteByte(g.waypoint_total);
	DataFlash.WriteByte(END_BYTE);

	// create a location struct to hold the temp Waypoints for printing
	struct Location cmd = get_wp_with_index(0);
		Log_Write_Cmd(0, &cmd);

	for (int i=1; i<g.waypoint_total; i++){
		cmd = get_wp_with_index(i);
		Log_Write_Cmd(i, &cmd);
	}
}


// Write a control tuning packet. Total length : 22 bytes
void Log_Write_Control_Tuning()
{
	Vector3f accel = imu.get_accel();

	DataFlash.WriteByte(HEAD_BYTE1);
	DataFlash.WriteByte(HEAD_BYTE2);
	DataFlash.WriteByte(LOG_CONTROL_TUNING_MSG);
	DataFlash.WriteInt((int)(g.rc_1.servo_out));
	DataFlash.WriteInt((int)nav_roll);
	DataFlash.WriteInt((int)dcm.roll_sensor);
	DataFlash.WriteInt((int)(g.rc_2.servo_out));
	DataFlash.WriteInt((int)nav_pitch);
	DataFlash.WriteInt((int)dcm.pitch_sensor);
	DataFlash.WriteInt((int)(g.rc_3.servo_out));
	DataFlash.WriteInt((int)(g.rc_4.servo_out));
	DataFlash.WriteInt((int)(accel.y * 10000));  
	DataFlash.WriteByte(END_BYTE);
}

// Write a navigation tuning packet. Total length : 18 bytes
void Log_Write_Nav_Tuning()
{
	DataFlash.WriteByte(HEAD_BYTE1);
	DataFlash.WriteByte(HEAD_BYTE2);
	DataFlash.WriteByte(LOG_NAV_TUNING_MSG);
	DataFlash.WriteInt((uint16_t)dcm.yaw_sensor);
	DataFlash.WriteInt((int)wp_distance);
	DataFlash.WriteInt((uint16_t)target_bearing);
	DataFlash.WriteInt((uint16_t)nav_bearing);
	DataFlash.WriteInt(altitude_error);
	DataFlash.WriteInt((int)airspeed);
	DataFlash.WriteInt((int)(nav_gain_scaler*1000));
	DataFlash.WriteByte(END_BYTE);
}

// Write a mode packet. Total length : 5 bytes
void Log_Write_Mode(byte mode)
{
	DataFlash.WriteByte(HEAD_BYTE1);
	DataFlash.WriteByte(HEAD_BYTE2);
	DataFlash.WriteByte(LOG_MODE_MSG);
	DataFlash.WriteByte(mode);
	DataFlash.WriteByte(END_BYTE);
}

// Write an GPS packet. Total length : 30 bytes
void Log_Write_GPS(	long log_Time, long log_Lattitude, long log_Longitude, long log_mix_alt, long log_gps_alt,
					long log_Ground_Speed, long log_Ground_Course, byte log_Fix, byte log_NumSats)
{
	DataFlash.WriteByte(HEAD_BYTE1);
	DataFlash.WriteByte(HEAD_BYTE2);
	DataFlash.WriteByte(LOG_GPS_MSG);
	DataFlash.WriteLong(log_Time);
	DataFlash.WriteByte(log_Fix);
	DataFlash.WriteByte(log_NumSats);
	DataFlash.WriteLong(log_Lattitude);
	DataFlash.WriteLong(log_Longitude);
	DataFlash.WriteLong(log_mix_alt);
	DataFlash.WriteLong(log_gps_alt);
	DataFlash.WriteLong(log_Ground_Speed);
	DataFlash.WriteLong(log_Ground_Course);
	DataFlash.WriteByte(END_BYTE);
	DataFlash.WriteByte(END_BYTE);
}

// Write an raw accel/gyro data packet. Total length : 28 bytes
void Log_Write_Raw()
{
	Vector3f gyro = imu.get_gyro();
	Vector3f accel = imu.get_accel();
	gyro *= t7;								// Scale up for storage as long integers
	accel *= t7;
	DataFlash.WriteByte(HEAD_BYTE1);
	DataFlash.WriteByte(HEAD_BYTE2);
	DataFlash.WriteByte(LOG_RAW_MSG);

	DataFlash.WriteLong((long)gyro.x);
	DataFlash.WriteLong((long)gyro.y);
	DataFlash.WriteLong((long)gyro.z);
	DataFlash.WriteLong((long)accel.x);
	DataFlash.WriteLong((long)accel.y);
	DataFlash.WriteLong((long)accel.z);
	
	DataFlash.WriteByte(END_BYTE);
}

void Log_Write_Current()
{
	DataFlash.WriteByte(HEAD_BYTE1);
	DataFlash.WriteByte(HEAD_BYTE2);
	DataFlash.WriteByte(LOG_CURRENT_MSG);
	DataFlash.WriteInt(g.rc_3.control_in);
	DataFlash.WriteInt((int)(current_voltage 	* 100.0));
	DataFlash.WriteInt((int)(current_amps 		* 100.0));
	DataFlash.WriteInt((int)current_total);
	DataFlash.WriteByte(END_BYTE);
}

// Read a Current packet
void Log_Read_Current()
{
	Serial.printf("CURR: %d, %4.4f, %4.4f, %d\n", 
			DataFlash.ReadInt(),
			((float)DataFlash.ReadInt() / 100.f),
			((float)DataFlash.ReadInt() / 100.f),
			DataFlash.ReadInt());
}

// Read an control tuning packet
void Log_Read_Control_Tuning()
{
	float logvar;

	Serial.print("CTUN:");
	for (int y=1;y<10;y++) {
		logvar = DataFlash.ReadInt();
		if(y < 8) logvar = logvar/100.f;
		if(y == 9) logvar = logvar/10000.f;
		Serial.print(logvar);
		Serial.print(comma);
	}
	Serial.println(" ");
}

// Read a nav tuning packet
void Log_Read_Nav_Tuning()
{
	Serial.print("NTUN:");
	Serial.print((float)((uint16_t)DataFlash.ReadInt())/100.0);			// Yaw from IMU
	Serial.print(comma);
	Serial.print(DataFlash.ReadInt());									// wp_distance
	Serial.print(comma);
	Serial.print((float)((uint16_t)DataFlash.ReadInt())/100.0);			// target_bearing - Bearing to Target
	Serial.print(comma);
	Serial.print((float)((uint16_t)DataFlash.ReadInt())/100.0);			// nav_bearing - Bearing to steer
	Serial.print(comma);
	Serial.print((float)DataFlash.ReadInt()/100.0);						// Altitude error
	Serial.print(comma);
	Serial.print((float)DataFlash.ReadInt()/100.0);						// Airspeed 
	Serial.println(comma);
	//Serial.print((float)DataFlash.ReadInt()/1000.0);					// nav_gain_scaler
	//Serial.println(comma);
}

// Read a performance packet
void Log_Read_Performance()
{
	long pm_time;
	int logvar;

	Serial.print("PM:");
	pm_time = DataFlash.ReadLong();
	Serial.print(pm_time);
	Serial.print(comma);
	for (int y=1;y<9;y++) {
		if(y<3 || y>7) logvar = DataFlash.ReadInt();
		else logvar = DataFlash.ReadByte();
		//if(y > 7) logvar = logvar/1000.f;
		Serial.print(logvar);
		Serial.print(comma);
	}
	Serial.println(" ");
}

// Read a command processing packet
void Log_Read_Cmd()
{
	byte logvarb;
	long logvarl;

	Serial.print("CMD:");
	for(int i=1;i<4;i++) {
		logvarb = DataFlash.ReadByte();
		Serial.print(logvarb,DEC);
		Serial.print(comma);
	}
	for(int i=1;i<4;i++) {
		logvarl = DataFlash.ReadLong();
		Serial.print(logvarl,DEC);
		Serial.print(comma);
	}
	Serial.println(" ");
}

void Log_Read_Startup()
{
	byte logbyte = DataFlash.ReadByte();
	if (logbyte == TYPE_AIRSTART_MSG)
		Serial.print("AIR START - ");
	else if (logbyte == TYPE_GROUNDSTART_MSG)
		Serial.print("GROUND START - ");
	else
		Serial.print("UNKNOWN STARTUP TYPE -");
	Serial.print(DataFlash.ReadByte(), DEC);
	Serial.println(" commands in memory");
}

// Read an attitude packet
void Log_Read_Attitude()
{
	int log_roll;
	int log_pitch;
	uint16_t log_yaw;

	log_roll 	= DataFlash.ReadInt();
	log_pitch 	= DataFlash.ReadInt();
	log_yaw 	= (uint16_t)DataFlash.ReadInt();

	Serial.print("ATT:");
	Serial.print(log_roll);
	Serial.print(comma);
	Serial.print(log_pitch);
	Serial.print(comma);
	Serial.print(log_yaw);
	Serial.println();
}

// Read a mode packet
void Log_Read_Mode()
{	
	Serial.print("MOD:");
	Serial.println(flight_mode_strings[DataFlash.ReadByte()]);
}

// Read a GPS packet
void Log_Read_GPS()
{

	Serial.print("GPS:");
	Serial.print(DataFlash.ReadLong());						// Time
	Serial.print(comma);
	Serial.print((int)DataFlash.ReadByte());				// Fix
	Serial.print(comma);
	Serial.print((int)DataFlash.ReadByte());				// Num of Sats
	Serial.print(comma);
	Serial.print((float)DataFlash.ReadLong()/t7, 7);			// Lattitude
	Serial.print(comma);
	Serial.print((float)DataFlash.ReadLong()/t7, 7);			// Longitude
	Serial.print(comma);
	Serial.print((float)DataFlash.ReadLong()/100.0);		// Baro/gps altitude mix
	Serial.print(comma);
	Serial.print((float)DataFlash.ReadLong()/100.0);		// GPS altitude
	Serial.print(comma);
	Serial.print((float)DataFlash.ReadLong()/100.0);		// Ground Speed
	Serial.print(comma);
	Serial.println((float)DataFlash.ReadLong()/100.0);		// Ground Course

}

// Read a raw accel/gyro packet
void Log_Read_Raw()
{
	float logvar;
	Serial.print("RAW:");
	for (int y=0;y<6;y++) {
		logvar = (float)DataFlash.ReadLong()/t7;
		Serial.print(logvar);
		Serial.print(comma);
	}
	Serial.println(" ");
}

// Read the DataFlash log memory : Packet Parser
void Log_Read(int start_page, int end_page)
{
	byte data;
	byte log_step=0;
	int packet_count=0;
	int page = start_page;


	DataFlash.StartRead(start_page);
	while (page < end_page && page != -1)
		{
		data = DataFlash.ReadByte();
		switch(log_step)		 //This is a state machine to read the packets
			{
			case 0:
				if(data==HEAD_BYTE1)	// Head byte 1
					log_step++;
				break;
			case 1:
				if(data==HEAD_BYTE2)	// Head byte 2
					log_step++;
				else
					log_step = 0;
				break;
			case 2:
				if(data==LOG_ATTITUDE_MSG){
					Log_Read_Attitude();
					log_step++;

				}else if(data==LOG_MODE_MSG){
					Log_Read_Mode();
					log_step++;

				}else if(data==LOG_CONTROL_TUNING_MSG){
					Log_Read_Control_Tuning();
					log_step++;

				}else if(data==LOG_NAV_TUNING_MSG){
					Log_Read_Nav_Tuning();
					log_step++;

				}else if(data==LOG_PERFORMANCE_MSG){
					Log_Read_Performance();
					log_step++;

				}else if(data==LOG_RAW_MSG){
					Log_Read_Raw();
					log_step++;

				}else if(data==LOG_CMD_MSG){
					Log_Read_Cmd();
					log_step++;
					
				}else if(data==LOG_CURRENT_MSG){
					Log_Read_Current();
					log_step++;
					
				}else if(data==LOG_STARTUP_MSG){
					Log_Read_Startup();
					log_step++;
				}else {
					if(data == LOG_GPS_MSG){
						Log_Read_GPS();
						log_step++;
					} else {
						Serial.print("Error Reading Packet: ");
						Serial.print(packet_count); 
						log_step = 0;	 // Restart, we have a problem...
					}
				}
				break;
			case 3:
				if(data==END_BYTE){
					 packet_count++;
				}else{
					Serial.print("Error Reading END_BYTE  ");
					Serial.println(data,DEC);
				}
				log_step=0;			// Restart sequence: new packet...
				break;
			}
		page = DataFlash.GetPage();
		}
	Serial.print("Number of packets read: ");
	Serial.println(packet_count);
}