# hw definition file for processing by chibios_hwdef.py
# for H743 bootloader

# MCU class and specific type
MCU STM32H7xx STM32H743xx

# crystal frequency
OSCILLATOR_HZ 8000000

define STM32_HSE_BYPASS

# board ID for firmware load
APJ_BOARD_ID 139

# the nucleo seems to have trouble with flashing the last sector?
FLASH_SIZE_KB 2048

FLASH_RESERVE_START_KB 128


# order of UARTs (and USB)
SERIAL_ORDER OTG1 EMPTY EMPTY UART7

PA11 OTG_FS_DM OTG1
PA12 OTG_FS_DP OTG1

PA13 JTMS-SWDIO SWD
PA14 JTCK-SWCLK SWD

# UART7 is debug
PF6 UART7_RX UART7 NODMA
PE8 UART7_TX UART7 NODMA

define HAL_USE_EMPTY_STORAGE 1
define HAL_STORAGE_SIZE 16384

define HAL_SPI_CHECK_CLOCK_FREQ

# sensor CS
PA4 MPU_CS CS
PC7 BARO_CS CS

PB0 LED1 OUTPUT LOW
PB7 LED2 OUTPUT LOW

# SPI1
PA5 SPI1_SCK SPI1
PA6 SPI1_MISO SPI1
PA7 SPI1_MOSI SPI1

# SPI3
PB3 SPI3_SCK SPI3
PB4 SPI3_MISO SPI3
PB5 SPI3_MOSI SPI3

# SPI devices
SPIDEV mpu6000        SPI3 DEVID1  MPU_CS    MODE3  2*MHZ  8*MHZ
SPIDEV ms5611         SPI3 DEVID2  BARO_CS   MODE3  8*MHZ  8*MHZ

# analog in
PA0 BATT_VOLTAGE_SENS ADC1 SCALE(1)
PA1 BATT_CURRENT_SENS ADC1 SCALE(1)

define ALLOW_ARM_NO_COMPASS
define HAL_COMPASS_DEFAULT HAL_COMPASS_NONE

# probe for an invensense IMU
IMU Invensense SPI:mpu6000 ROTATION_NONE

# and ms5611 baro
BARO MS56XX SPI:ms56xx

# define HAL_DISABLE_DCACHE