// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*- /// @file GCS.h /// @brief Interface definition for the various Ground Control System // protocols. #ifndef __GCS_H #define __GCS_H #include #include #include "GCS_MAVLink.h" #include #include #include #include #include "MAVLink_routing.h" #include #include // check if a message will fit in the payload space available #define HAVE_PAYLOAD_SPACE(chan, id) (comm_get_txspace(chan) >= MAVLINK_NUM_NON_PAYLOAD_BYTES+MAVLINK_MSG_ID_ ## id ## _LEN) #define CHECK_PAYLOAD_SIZE(id) if (comm_get_txspace(chan) < MAVLINK_NUM_NON_PAYLOAD_BYTES+MAVLINK_MSG_ID_ ## id ## _LEN) return false #define CHECK_PAYLOAD_SIZE2(id) if (!HAVE_PAYLOAD_SPACE(chan, id)) return false // GCS Message ID's /// NOTE: to ensure we never block on sending MAVLink messages /// please keep each MSG_ to a single MAVLink message. If need be /// create new MSG_ IDs for additional messages on the same /// stream enum ap_message { MSG_HEARTBEAT, MSG_ATTITUDE, MSG_LOCATION, MSG_EXTENDED_STATUS1, MSG_EXTENDED_STATUS2, MSG_NAV_CONTROLLER_OUTPUT, MSG_CURRENT_WAYPOINT, MSG_VFR_HUD, MSG_RADIO_OUT, MSG_RADIO_IN, MSG_RAW_IMU1, MSG_RAW_IMU2, MSG_RAW_IMU3, MSG_GPS_RAW, MSG_SYSTEM_TIME, MSG_SERVO_OUT, MSG_NEXT_WAYPOINT, MSG_NEXT_PARAM, MSG_STATUSTEXT, MSG_LIMITS_STATUS, MSG_FENCE_STATUS, MSG_AHRS, MSG_SIMSTATE, MSG_HWSTATUS, MSG_WIND, MSG_RANGEFINDER, MSG_TERRAIN, MSG_BATTERY2, MSG_CAMERA_FEEDBACK, MSG_MOUNT_STATUS, MSG_OPTICAL_FLOW, MSG_GIMBAL_REPORT, MSG_MAG_CAL_PROGRESS, MSG_MAG_CAL_REPORT, MSG_EKF_STATUS_REPORT, MSG_LOCAL_POSITION, MSG_PID_TUNING, MSG_VIBRATION, MSG_RPM, MSG_MISSION_ITEM_REACHED, MSG_RETRY_DEFERRED // this must be last }; /// /// @class GCS_MAVLINK /// @brief MAVLink transport control class /// class GCS_MAVLINK { public: GCS_MAVLINK(); FUNCTOR_TYPEDEF(run_cli_fn, void, AP_HAL::UARTDriver*); void update(run_cli_fn run_cli); void init(AP_HAL::UARTDriver *port, mavlink_channel_t mav_chan); void setup_uart(const AP_SerialManager& serial_manager, AP_SerialManager::SerialProtocol protocol, uint8_t instance); void send_message(enum ap_message id); void send_text(MAV_SEVERITY severity, const char *str); void send_text_P(MAV_SEVERITY severity, const prog_char_t *str); void data_stream_send(void); void queued_param_send(); void queued_waypoint_send(); void set_snoop(void (*_msg_snoop)(const mavlink_message_t* msg)) { msg_snoop = _msg_snoop; } // accessor for uart AP_HAL::UARTDriver *get_uart() { return _port; } static const struct AP_Param::GroupInfo var_info[]; // set to true if this GCS link is active bool initialised; // NOTE! The streams enum below and the // set of AP_Int16 stream rates _must_ be // kept in the same order enum streams {STREAM_RAW_SENSORS, STREAM_EXTENDED_STATUS, STREAM_RC_CHANNELS, STREAM_RAW_CONTROLLER, STREAM_POSITION, STREAM_EXTRA1, STREAM_EXTRA2, STREAM_EXTRA3, STREAM_PARAMS, NUM_STREAMS}; // see if we should send a stream now. Called at 50Hz bool stream_trigger(enum streams stream_num); // this costs us 51 bytes per instance, but means that low priority // messages don't block the CPU mavlink_statustext_t pending_status; // call to reset the timeout window for entering the cli void reset_cli_timeout(); uint32_t last_heartbeat_time; // milliseconds // last time we got a non-zero RSSI from RADIO_STATUS static uint32_t last_radio_status_remrssi_ms; // mission item index to be sent on queued msg, delayed or not uint16_t mission_item_reached_index = AP_MISSION_CMD_INDEX_NONE; // common send functions void send_meminfo(void); void send_power_status(void); void send_ahrs2(AP_AHRS &ahrs); bool send_gps_raw(AP_GPS &gps); void send_system_time(AP_GPS &gps); void send_radio_in(uint8_t receiver_rssi); void send_raw_imu(const AP_InertialSensor &ins, const Compass &compass); void send_scaled_pressure(AP_Baro &barometer); void send_sensor_offsets(const AP_InertialSensor &ins, const Compass &compass, AP_Baro &barometer); void send_ahrs(AP_AHRS &ahrs); void send_battery2(const AP_BattMonitor &battery); #if AP_AHRS_NAVEKF_AVAILABLE void send_opticalflow(AP_AHRS_NavEKF &ahrs, const OpticalFlow &optflow); #endif void send_autopilot_version(uint8_t major_version, uint8_t minor_version, uint8_t patch_version, uint8_t version_type) const; void send_local_position(const AP_AHRS &ahrs) const; void send_vibration(const AP_InertialSensor &ins) const; // return a bitmap of active channels. Used by libraries to loop // over active channels to send to all active channels static uint8_t active_channel_mask(void) { return mavlink_active; } /* send a statustext message to all active MAVLink connections. This function is static so it can be called from any library */ static void send_statustext_all(MAV_SEVERITY severity, const prog_char_t *fmt, ...); /* send a MAVLink message to all components with this vehicle's system id This is a no-op if no routes to components have been learned */ static void send_to_components(const mavlink_message_t* msg) { routing.send_to_components(msg); } /* search for a component in the routing table with given mav_type and retrieve it's sysid, compid and channel returns if a matching component is found */ static bool find_by_mavtype(uint8_t mav_type, uint8_t &sysid, uint8_t &compid, mavlink_channel_t &channel) { return routing.find_by_mavtype(mav_type, sysid, compid, channel); } private: void handleMessage(mavlink_message_t * msg); /// The stream we are communicating over AP_HAL::UARTDriver *_port; /// Perform queued sending operations /// AP_Param * _queued_parameter; ///< next parameter to // be sent in queue enum ap_var_type _queued_parameter_type; ///< type of the next // parameter AP_Param::ParamToken _queued_parameter_token; ///AP_Param token for // next() call uint16_t _queued_parameter_index; ///< next queued // parameter's index uint16_t _queued_parameter_count; ///< saved count of // parameters for // queued send uint32_t _queued_parameter_send_time_ms; /// Count the number of reportable parameters. /// /// Not all parameters can be reported via MAVlink. We count the number // that are /// so that we can report to a GCS the number of parameters it should // expect when it /// requests the full set. /// /// @return The number of reportable parameters. /// uint16_t _count_parameters(); ///< count reportable // parameters uint16_t _parameter_count; ///< cache of reportable // parameters mavlink_channel_t chan; uint16_t packet_drops; // this allows us to detect the user wanting the CLI to start uint8_t crlf_count; // waypoints uint16_t waypoint_request_i; // request index uint16_t waypoint_request_last; // last request index uint16_t waypoint_dest_sysid; // where to send requests uint16_t waypoint_dest_compid; // " bool waypoint_receiving; // currently receiving uint16_t waypoint_count; uint32_t waypoint_timelast_receive; // milliseconds uint32_t waypoint_timelast_request; // milliseconds const uint16_t waypoint_receive_timeout; // milliseconds // saveable rate of each stream AP_Int16 streamRates[NUM_STREAMS]; // number of 50Hz ticks until we next send this stream uint8_t stream_ticks[NUM_STREAMS]; // number of extra ticks to add to slow things down for the radio uint8_t stream_slowdown; // millis value to calculate cli timeout relative to. // exists so we can separate the cli entry time from the system start time uint32_t _cli_timeout; uint8_t _log_listing:1; // sending log list uint8_t _log_sending:1; // sending log data // next log list entry to send uint16_t _log_next_list_entry; // last log list entry to send uint16_t _log_last_list_entry; // number of log files uint16_t _log_num_logs; // log number for data send uint16_t _log_num_data; // offset in log uint32_t _log_data_offset; // size of log file uint32_t _log_data_size; // number of bytes left to send uint32_t _log_data_remaining; // start page of log data uint16_t _log_data_page; // deferred message handling enum ap_message deferred_messages[MSG_RETRY_DEFERRED]; uint8_t next_deferred_message; uint8_t num_deferred_messages; // bitmask of what mavlink channels are active static uint8_t mavlink_active; // mavlink routing object static MAVLink_routing routing; // a vehicle can optionally snoop on messages for other systems static void (*msg_snoop)(const mavlink_message_t* msg); // vehicle specific message send function bool try_send_message(enum ap_message id); void handle_guided_request(AP_Mission::Mission_Command &cmd); void handle_change_alt_request(AP_Mission::Mission_Command &cmd); void handle_log_request_list(mavlink_message_t *msg, DataFlash_Class &dataflash); void handle_log_request_data(mavlink_message_t *msg, DataFlash_Class &dataflash); void handle_log_request_erase(mavlink_message_t *msg, DataFlash_Class &dataflash); void handle_log_request_end(mavlink_message_t *msg, DataFlash_Class &dataflash); void handle_log_message(mavlink_message_t *msg, DataFlash_Class &dataflash); void handle_log_send(DataFlash_Class &dataflash); void handle_log_send_listing(DataFlash_Class &dataflash); bool handle_log_send_data(DataFlash_Class &dataflash); void handle_mission_request_list(AP_Mission &mission, mavlink_message_t *msg); void handle_mission_request(AP_Mission &mission, mavlink_message_t *msg); void handle_mission_set_current(AP_Mission &mission, mavlink_message_t *msg); void handle_mission_count(AP_Mission &mission, mavlink_message_t *msg); void handle_mission_clear_all(AP_Mission &mission, mavlink_message_t *msg); void handle_mission_write_partial_list(AP_Mission &mission, mavlink_message_t *msg); bool handle_mission_item(mavlink_message_t *msg, AP_Mission &mission); void handle_request_data_stream(mavlink_message_t *msg, bool save); void handle_param_request_list(mavlink_message_t *msg); void handle_param_request_read(mavlink_message_t *msg); void handle_param_set(mavlink_message_t *msg, DataFlash_Class *DataFlash); void handle_radio_status(mavlink_message_t *msg, DataFlash_Class &dataflash, bool log_radio); void handle_serial_control(mavlink_message_t *msg, AP_GPS &gps); void lock_channel(mavlink_channel_t chan, bool lock); FUNCTOR_TYPEDEF(set_mode_fn, bool, uint8_t); void handle_set_mode(mavlink_message_t* msg, set_mode_fn set_mode); void handle_gimbal_report(AP_Mount &mount, mavlink_message_t *msg) const; void handle_gps_inject(const mavlink_message_t *msg, AP_GPS &gps); // return true if this channel has hardware flow control bool have_flow_control(void); }; #endif // __GCS_H