// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*- // ////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////////// // // WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING // // DO NOT EDIT this file to adjust your configuration. Create your own // APM_Config.h and use APM_Config.h.example as a reference. // // WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING /// ////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////////// // // Default and automatic configuration details. // // Notes for maintainers: // // - Try to keep this file organised in the same order as APM_Config.h.example // #include "defines.h" /// /// DO NOT EDIT THIS INCLUDE - if you want to make a local change, make that /// change in your local copy of APM_Config.h. /// #ifdef USE_CMAKE_APM_CONFIG #include "APM_Config_cmake.h" // <== Prefer cmake config if it exists #else #include "APM_Config.h" // <== THIS INCLUDE, DO NOT EDIT IT. EVER. #endif /// /// DO NOT EDIT THIS INCLUDE - if you want to make a local change, make that /// change in your local copy of APM_Config.h. /// // Just so that it's completely clear... #define ENABLED 1 #define DISABLED 0 // this avoids a very common config error #define ENABLE ENABLED #define DISABLE DISABLED ////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////////// // HARDWARE CONFIGURATION AND CONNECTIONS ////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////////// #ifdef CONFIG_APM_HARDWARE #error CONFIG_APM_HARDWARE option is depreated! use CONFIG_HAL_BOARD instead. #endif #ifndef MAV_SYSTEM_ID # define MAV_SYSTEM_ID 1 #endif ////////////////////////////////////////////////////////////////////////////// // FrSky telemetry support // #ifndef FRSKY_TELEM_ENABLED #if CONFIG_HAL_BOARD == HAL_BOARD_APM1 || CONFIG_HAL_BOARD == HAL_BOARD_APM2 # define FRSKY_TELEM_ENABLED DISABLED #else # define FRSKY_TELEM_ENABLED ENABLED #endif #endif ////////////////////////////////////////////////////////////////////////////// // Optical flow sensor support // #ifndef OPTFLOW #if AP_AHRS_NAVEKF_AVAILABLE # define OPTFLOW ENABLED #else # define OPTFLOW DISABLED #endif #endif ////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////////// // RADIO CONFIGURATION ////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////////// // Radio channel limits // // Note that these are not called out in APM_Config.h.reference. // #ifndef CH5_MIN # define CH5_MIN 1000 #endif #ifndef CH5_MAX # define CH5_MAX 2000 #endif #ifndef CH6_MIN # define CH6_MIN 1000 #endif #ifndef CH6_MAX # define CH6_MAX 2000 #endif #ifndef CH7_MIN # define CH7_MIN 1000 #endif #ifndef CH7_MAX # define CH7_MAX 2000 #endif #ifndef CH8_MIN # define CH8_MIN 1000 #endif #ifndef CH8_MAX # define CH8_MAX 2000 #endif #ifndef FLAP_1_PERCENT # define FLAP_1_PERCENT 0 #endif #ifndef FLAP_1_SPEED # define FLAP_1_SPEED 0 #endif #ifndef FLAP_2_PERCENT # define FLAP_2_PERCENT 0 #endif #ifndef FLAP_2_SPEED # define FLAP_2_SPEED 0 #endif ////////////////////////////////////////////////////////////////////////////// // FLIGHT_MODE // FLIGHT_MODE_CHANNEL // #ifndef FLIGHT_MODE_CHANNEL # define FLIGHT_MODE_CHANNEL 8 #endif #if (FLIGHT_MODE_CHANNEL != 5) && (FLIGHT_MODE_CHANNEL != 6) && (FLIGHT_MODE_CHANNEL != 7) && (FLIGHT_MODE_CHANNEL != 8) # error XXX # error XXX You must set FLIGHT_MODE_CHANNEL to 5, 6, 7 or 8 # error XXX #endif #if !defined(FLIGHT_MODE_1) # define FLIGHT_MODE_1 RTL #endif #if !defined(FLIGHT_MODE_2) # define FLIGHT_MODE_2 RTL #endif #if !defined(FLIGHT_MODE_3) # define FLIGHT_MODE_3 FLY_BY_WIRE_A #endif #if !defined(FLIGHT_MODE_4) # define FLIGHT_MODE_4 FLY_BY_WIRE_A #endif #if !defined(FLIGHT_MODE_5) # define FLIGHT_MODE_5 MANUAL #endif #if !defined(FLIGHT_MODE_6) # define FLIGHT_MODE_6 MANUAL #endif ////////////////////////////////////////////////////////////////////////////// // THROTTLE_FAILSAFE // THROTTLE_FS_VALUE // SHORT_FAILSAFE_ACTION // LONG_FAILSAFE_ACTION #ifndef THROTTLE_FAILSAFE # define THROTTLE_FAILSAFE ENABLED #endif #ifndef THROTTLE_FS_VALUE # define THROTTLE_FS_VALUE 950 #endif #ifndef SHORT_FAILSAFE_ACTION # define SHORT_FAILSAFE_ACTION 0 #endif #ifndef LONG_FAILSAFE_ACTION # define LONG_FAILSAFE_ACTION 0 #endif ////////////////////////////////////////////////////////////////////////////// // AUTO_TRIM // #ifndef AUTO_TRIM # define AUTO_TRIM DISABLED #endif ////////////////////////////////////////////////////////////////////////////// // THROTTLE_OUT // #ifndef THROTTE_OUT # define THROTTLE_OUT ENABLED #endif ////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////////// // STARTUP BEHAVIOUR ////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////////// // GROUND_START_DELAY // #ifndef GROUND_START_DELAY # define GROUND_START_DELAY 0 #endif ////////////////////////////////////////////////////////////////////////////// // ENABLE ELEVON_MIXING // #ifndef ELEVON_MIXING # define ELEVON_MIXING DISABLED #endif #ifndef ELEVON_REVERSE # define ELEVON_REVERSE DISABLED #endif #ifndef ELEVON_CH1_REVERSE # define ELEVON_CH1_REVERSE DISABLED #endif #ifndef ELEVON_CH2_REVERSE # define ELEVON_CH2_REVERSE DISABLED #endif ////////////////////////////////////////////////////////////////////////////// // CAMERA TRIGGER AND CONTROL // // uses 1182 bytes of memory #ifndef CAMERA # define CAMERA ENABLED #endif ////////////////////////////////////////////////////////////////////////////// // MOUNT (ANTENNA OR CAMERA) // // uses 7726 bytes of memory on 2560 chips (all options are enabled) #ifndef MOUNT # define MOUNT ENABLED #endif ////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////////// // FLIGHT AND NAVIGATION CONTROL ////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////////// // Altitude measurement and control. // #ifndef ALTITUDE_MIX # define ALTITUDE_MIX 1 #endif ////////////////////////////////////////////////////////////////////////////// // AIRSPEED_CRUISE // #ifndef AIRSPEED_CRUISE # define AIRSPEED_CRUISE 12 // 12 m/s #endif #define AIRSPEED_CRUISE_CM AIRSPEED_CRUISE*100 ////////////////////////////////////////////////////////////////////////////// // MIN_GNDSPEED // #ifndef MIN_GNDSPEED # define MIN_GNDSPEED 0 // m/s (0 disables) #endif #define MIN_GNDSPEED_CM MIN_GNDSPEED*100 ////////////////////////////////////////////////////////////////////////////// // FLY_BY_WIRE_B airspeed control // #ifndef AIRSPEED_FBW_MIN # define AIRSPEED_FBW_MIN 9 #endif #ifndef AIRSPEED_FBW_MAX # define AIRSPEED_FBW_MAX 22 #endif #ifndef ALT_HOLD_FBW # define ALT_HOLD_FBW 0 #endif #define ALT_HOLD_FBW_CM ALT_HOLD_FBW*100 ////////////////////////////////////////////////////////////////////////////// // Servo Mapping // #ifndef THROTTLE_MIN # define THROTTLE_MIN 0 // percent #endif #ifndef THROTTLE_CRUISE # define THROTTLE_CRUISE 45 #endif #ifndef THROTTLE_MAX # define THROTTLE_MAX 75 #endif ////////////////////////////////////////////////////////////////////////////// // Autopilot control limits // #ifndef HEAD_MAX # define HEAD_MAX 45 #endif #ifndef PITCH_MAX # define PITCH_MAX 20 #endif #ifndef PITCH_MIN # define PITCH_MIN -25 #endif #define HEAD_MAX_CENTIDEGREE HEAD_MAX * 100 #define PITCH_MAX_CENTIDEGREE PITCH_MAX * 100 #define PITCH_MIN_CENTIDEGREE PITCH_MIN * 100 #ifndef RUDDER_MIX # define RUDDER_MIX 0.5 #endif ////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////////// // DEBUGGING ////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////////// ////////////////////////////////////////////////////////////////////////////// // Dataflash logging control // #ifndef LOGGING_ENABLED # define LOGGING_ENABLED ENABLED #endif #if CONFIG_HAL_BOARD == HAL_BOARD_APM1 || CONFIG_HAL_BOARD == HAL_BOARD_APM2 #define DEFAULT_LOG_BITMASK \ MASK_LOG_ATTITUDE_MED | \ MASK_LOG_GPS | \ MASK_LOG_PM | \ MASK_LOG_NTUN | \ MASK_LOG_CTUN | \ MASK_LOG_MODE | \ MASK_LOG_CMD | \ MASK_LOG_COMPASS | \ MASK_LOG_CURRENT | \ MASK_LOG_TECS | \ MASK_LOG_CAMERA | \ MASK_LOG_RC #else // other systems have plenty of space for full logs #define DEFAULT_LOG_BITMASK 0xffff #endif ////////////////////////////////////////////////////////////////////////////// // Navigation defaults // #ifndef WP_RADIUS_DEFAULT # define WP_RADIUS_DEFAULT 90 #endif #ifndef LOITER_RADIUS_DEFAULT # define LOITER_RADIUS_DEFAULT 60 #endif #ifndef ALT_HOLD_HOME # define ALT_HOLD_HOME 100 #endif #define ALT_HOLD_HOME_CM ALT_HOLD_HOME*100 #ifndef USE_CURRENT_ALT # define USE_CURRENT_ALT FALSE #endif #ifndef INVERTED_FLIGHT_PWM # define INVERTED_FLIGHT_PWM 1750 #endif #ifndef PX4IO_OVERRIDE_PWM # define PX4IO_OVERRIDE_PWM 1750 #endif ////////////////////////////////////////////////////////////////////////////// // Developer Items // #ifndef SCALING_SPEED # define SCALING_SPEED 15.0 #endif // use this to completely disable the CLI. We now default the CLI to // off on smaller boards. #ifndef CLI_ENABLED #if HAL_CPU_CLASS > HAL_CPU_CLASS_16 # define CLI_ENABLED ENABLED #else # define CLI_ENABLED DISABLE #endif #endif // use this to disable geo-fencing #ifndef GEOFENCE_ENABLED # define GEOFENCE_ENABLED ENABLED #endif // pwm value on FENCE_CHANNEL to use to enable fenced mode #ifndef FENCE_ENABLE_PWM # define FENCE_ENABLE_PWM 1750 #endif // a digital pin to set high when the geo-fence triggers. Defaults // to -1, which means don't activate a pin #ifndef FENCE_TRIGGERED_PIN # define FENCE_TRIGGERED_PIN -1 #endif // if RESET_SWITCH_CH is not zero, then this is the PWM value on // that channel where we reset the control mode to the current switch // position (to for example return to switched mode after failsafe or // fence breach) #ifndef RESET_SWITCH_CHAN_PWM # define RESET_SWITCH_CHAN_PWM 1750 #endif // OBC Failsafe enable #ifndef OBC_FAILSAFE #if HAL_CPU_CLASS >= HAL_CPU_CLASS_75 # define OBC_FAILSAFE ENABLED #else # define OBC_FAILSAFE DISABLED #endif #endif #if OBC_FAILSAFE == ENABLED && HAL_CPU_CLASS < HAL_CPU_CLASS_75 #define CLI_ENABLED DISABLED #endif /* build a firmware version string. GIT_VERSION comes from Makefile builds */ #ifndef GIT_VERSION #define FIRMWARE_STRING THISFIRMWARE #else #define FIRMWARE_STRING THISFIRMWARE " (" GIT_VERSION ")" #endif