# hw definition file for processing by chibios_pins.py

# MCU class and specific type
MCU STM32F7xx STM32F732xx

FLASH_RESERVE_START_KB 0
# two sectors for bootloader, two for storage
FLASH_BOOTLOADER_LOAD_KB 64

# board ID for firmware load
APJ_BOARD_ID 1028

# also support px4 firmware with ID 85
ALT_BOARD_ID 85

# setup build for a peripheral firmware
env AP_PERIPH 1

# crystal frequency
OSCILLATOR_HZ 16000000

# assume 512k flash part
FLASH_SIZE_KB 512

# order of UARTs
SERIAL_ORDER OTG1

PC7 USB_RESET_N OUTPUT PUSHPULL HIGH

# use safety button to stay in bootloader
PC14 STAY_IN_BOOTLOADER INPUT PULLDOWN
define HAL_STAY_IN_BOOTLOADER_VALUE 1

PA6 LED_BOOTLOADER OUTPUT HIGH
define HAL_LED_ON 0

# Now we define the pins that USB is connected on.
PA11 OTG_FS_DM OTG1
PA12 OTG_FS_DP OTG1

# These are the pins for SWD debugging with a STlinkv2 or black-magic probe.
PA13 JTMS-SWDIO SWD
PA14 JTCK-SWCLK SWD

define HAL_USE_SERIAL FALSE

define STM32_SERIAL_USE_USART1 FALSE
define STM32_SERIAL_USE_USART2 FALSE
define STM32_SERIAL_USE_USART3 FALSE

define HAL_NO_GPIO_IRQ
define HAL_USE_EMPTY_IO TRUE

# avoid timer and RCIN threads to save memory
define HAL_NO_TIMER_THREAD
define HAL_NO_RCIN_THREAD

define DMA_RESERVE_SIZE 0

define HAL_DISABLE_LOOP_DELAY

# enable CAN support
PB8 CAN1_RX CAN1
PB9 CAN1_TX CAN1

# make bl baudrate match debug baudrate for easier debugging
define BOOTLOADER_BAUDRATE 57600

# use a small bootloader timeout
define HAL_BOOTLOADER_TIMEOUT 1000

# Add CS pins to ensure they are high in bootloader
PA15 IMU_CS CS