/* This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #include #include "AP_Proximity_TeraRangerTowerEvo.h" #include #include #include extern const AP_HAL::HAL& hal; // update the state of the sensor void AP_Proximity_TeraRangerTowerEvo::update(void) { if (_uart == nullptr) { return; } if (_last_request_sent_ms == 0) { _last_request_sent_ms = AP_HAL::millis(); } //initialize the sensor if(_current_init_state != InitState::InitState_Finished) { initialise_modes(); } // process incoming messages read_sensor_data(); // check for timeout and set health status if ((_last_distance_received_ms == 0) || (AP_HAL::millis() - _last_distance_received_ms > PROXIMITY_TRTOWER_TIMEOUT_MS)) { set_status(AP_Proximity::Status::NoData); } else { set_status(AP_Proximity::Status::Good); } } // get maximum and minimum distances (in meters) of primary sensor float AP_Proximity_TeraRangerTowerEvo::distance_max() const { return 60.0f; } float AP_Proximity_TeraRangerTowerEvo::distance_min() const { return 0.50f; } void AP_Proximity_TeraRangerTowerEvo::initialise_modes() { if((AP_HAL::millis() - _last_request_sent_ms) < _mode_request_delay) { return; } if (_current_init_state == InitState_Printout) { set_mode(BINARY_MODE, 4); } else if (_current_init_state == InitState_Sequence) { //set tower mode - 4 sensors are triggered at once with 90 deg angle between each sensor set_mode(TOWER_MODE, 4); } else if (_current_init_state == InitState_Rate) { //set update rate of the sensor. set_mode(REFRESH_100_HZ, 5); } else if (_current_init_state == InitState_StreamStart) { set_mode(ACTIVATE_STREAM, 5); } } void AP_Proximity_TeraRangerTowerEvo::set_mode(const uint8_t *c, int length) { _uart->write(c, length); _last_request_sent_ms = AP_HAL::millis(); } // check for replies from sensor, returns true if at least one message was processed bool AP_Proximity_TeraRangerTowerEvo::read_sensor_data() { if (_uart == nullptr) { return false; } uint16_t message_count = 0; int16_t nbytes = _uart->available(); if(_current_init_state != InitState_Finished && nbytes == 4) { //Increment _current_init_state only when we receive 4 ack bytes switch (_current_init_state) { case InitState_Printout: _current_init_state = InitState_Sequence; break; case InitState_Sequence: _current_init_state = InitState_Rate; break; case InitState_Rate: _current_init_state = InitState_StreamStart; break; case InitState_StreamStart: _current_init_state = InitState_Finished; break; case InitState_Finished: break; } } while (nbytes-- > 0) { char c = _uart->read(); if (c == 'T' ) { buffer_count = 0; } buffer[buffer_count++] = c; // we should always read 19 bytes THxxxxxxxxxxxxxxxxMC if (buffer_count >= 20){ buffer_count = 0; //check if message has right CRC if (crc_crc8(buffer, 19) == buffer[19]){ update_sector_data(0, UINT16_VALUE(buffer[2], buffer[3])); // d1 update_sector_data(45, UINT16_VALUE(buffer[4], buffer[5])); // d2 update_sector_data(90, UINT16_VALUE(buffer[6], buffer[7])); // d3 update_sector_data(135, UINT16_VALUE(buffer[8], buffer[9])); // d4 update_sector_data(180, UINT16_VALUE(buffer[10], buffer[11])); // d5 update_sector_data(225, UINT16_VALUE(buffer[12], buffer[13])); // d6 update_sector_data(270, UINT16_VALUE(buffer[14], buffer[15])); // d7 update_sector_data(315, UINT16_VALUE(buffer[16], buffer[17])); // d8 message_count++; } } } return (message_count > 0); } // process reply void AP_Proximity_TeraRangerTowerEvo::update_sector_data(int16_t angle_deg, uint16_t distance_cm) { // Get location on 3-D boundary based on angle to the object const AP_Proximity_Boundary_3D::Face face = boundary.get_face(angle_deg); //check for target too far, target too close and sensor not connected const bool valid = distance_cm != 0xffff && distance_cm != 0x0000 && distance_cm != 0x0001; if (valid) { boundary.set_face_attributes(face, angle_deg, ((float) distance_cm) / 1000); // update OA database database_push(angle_deg, ((float) distance_cm) / 1000); } else { boundary.reset_face(face); } _last_distance_received_ms = AP_HAL::millis(); }