// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: t -*- /* GPS_MTK.cpp - Ublox GPS library for Arduino Code by Jordi Mu�oz and Jose Julio. DIYDrones.com This code works with boards based on ATMega168/328 and ATMega1280 (Serial port 1) This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. GPS configuration : Costum protocol Baud rate : 38400 Methods: init() : GPS initialization update() : Call this funcion as often as you want to ensure you read the incomming gps data Properties: lattitude : lattitude * 10000000 (long value) longitude : longitude * 10000000 (long value) altitude : altitude * 100 (meters) (long value) ground_speed : Speed (m/s) * 100 (long value) ground_course : Course (degrees) * 100 (long value) new_data : 1 when a new data is received. You need to write a 0 to new_data when you read the data fix : 1: GPS NO fix, 2: 2D fix, 3: 3D fix. */ #include "AP_GPS_IMU.h" #if defined(ARDUINO) && ARDUINO >= 100 #include "Arduino.h" #else #include "WProgram.h" #endif // Constructors //////////////////////////////////////////////////////////////// AP_GPS_IMU::AP_GPS_IMU(Stream *s) : GPS(s) { } // Public Methods ////////////////////////////////////////////////////////////// void AP_GPS_IMU::init(void) { // we expect the stream to already be open at the corret bitrate idleTimeout = 1200; } // optimization : This code doesn't wait for data. It only proccess the data available. // We can call this function on the main loop (50Hz loop) // If we get a complete packet this function calls parse_IMU_gps() to parse and update the GPS info. bool AP_GPS_IMU::read(void) { byte data; int numc = 0; numc = _port->available(); if (numc > 0) { for (int i=0; iread(); switch(step) { //Normally we start from zero. This is a state machine case 0: if(data == 0x44) // IMU sync char 1 step++; //OH first data packet is correct, so jump to the next step break; case 1: if(data == 0x49) // IMU sync char 2 step++; //ooh! The second data packet is correct, jump to the step 2 else step=0; //Nop, is not correct so restart to step zero and try again. break; case 2: if(data == 0x59) // IMU sync char 3 step++; //ooh! The second data packet is correct, jump to the step 2 else step=0; //Nop, is not correct so restart to step zero and try again. break; case 3: if(data == 0x64) // IMU sync char 4 step++; //ooh! The second data packet is correct, jump to the step 2 else step=0; //Nop, is not correct so restart to step zero and try again. break; case 4: payload_length = data; checksum(payload_length); step++; if (payload_length > 28) { step = 0; //Bad data, so restart to step zero and try again. payload_counter = 0; ck_a = 0; ck_b = 0; //payload_error_count++; } break; case 5: message_num = data; checksum(data); step++; break; case 6: // Payload data read... // We stay in this state until we reach the payload_length buffer[payload_counter] = data; checksum(data); payload_counter++; if (payload_counter >= payload_length) { step++; } break; case 7: GPS_ck_a = data; // First checksum byte step++; break; case 8: GPS_ck_b = data; // Second checksum byte // We end the IMU/GPS read... // Verify the received checksum with the generated checksum.. if((ck_a == GPS_ck_a) && (ck_b == GPS_ck_b)) { if (message_num == 0x02) { join_data(); } else if (message_num == 0x03) { GPS_join_data(); } else if (message_num == 0x04) { join_data_xplane(); } else if (message_num == 0x0a) { //PERF_join_data(); } else { // _error("Invalid message number = %d\n", (int)message_num); } } else { // _error("XXX Checksum error\n"); //bad checksum //imu_checksum_error_count++; } // Variable initialization step = 0; payload_counter = 0; ck_a = 0; ck_b = 0; break; } }// End for... } return true; } /**************************************************************** * ****************************************************************/ void AP_GPS_IMU::join_data(void) { //Verifing if we are in class 1, you can change this "IF" for a "Switch" in case you want to use other IMU classes.. //In this case all the message im using are in class 1, to know more about classes check PAGE 60 of DataSheet. //Storing IMU roll roll_sensor = *(int *)&buffer[0]; //Storing IMU pitch pitch_sensor = *(int *)&buffer[2]; //Storing IMU heading (yaw) ground_course = *(int *)&buffer[4]; imu_ok = true; } void AP_GPS_IMU::join_data_xplane() { //Storing IMU roll roll_sensor = *(int *)&buffer[0]; //Storing IMU pitch pitch_sensor = *(int *)&buffer[2]; //Storing IMU heading (yaw) ground_course = *(unsigned int *)&buffer[4]; //Storing airspeed airspeed = *(int *)&buffer[6]; imu_ok = true; } void AP_GPS_IMU::GPS_join_data(void) { longitude = *(long *)&buffer[0]; // degrees * 10e7 latitude = *(long *)&buffer[4]; //Storing GPS Height above the sea level altitude = (long)*(int *)&buffer[8] * 10; //Storing Speed speed_3d = ground_speed = (float)*(int *)&buffer[10]; //We skip the gps ground course because we use yaw value from the IMU for ground course time = *(long *)&buffer[14]; imu_health = buffer[15]; new_data = true; fix = true; } /**************************************************************** * ****************************************************************/ // checksum algorithm void AP_GPS_IMU::checksum(unsigned char data) { ck_a += data; ck_b += ck_a; } /**************************************************************** * Unused ****************************************************************/ void AP_GPS_IMU::setHIL(long _time, float _latitude, float _longitude, float _altitude, float _ground_speed, float _ground_course, float _speed_3d, uint8_t _num_sats) {};