Release 1.5.0 27th Mar 2023
---------------------------

This is a major release with the following changes:

- fixed airspeed bus default
- limit mag to 25Hz by default
- fixed send rate of GPS yaw
- fixed HW ESC telem temp units
- allow set of port for HW telem
- send GNSS heading message if available
- stop sending old GNSS Fix message

Release 1.4.1 27th Sep 2022
---------------------------

This is a minor release with one bug fix:

 - fixed compass diagnonal compensation for AP_Periph compasses

Release 1.4.0 4th Sep 2022
--------------------------

This is a major release with a significant number of changes:

 - use new AP_CheckFirmware system
 - fixed passing of WGS84 height from GPS
 - support CANFD on STM32H7
 - fixes for moving baseline yaw with DroneCAN GPS
 - fixed GPS dropout issues on F4 and L4 GPS
 - added EFI peripheral support
 - fixed non-contiguous mask for ESC telem

Release 1.3.1 15th Apr 2022
---------------------------

This is a minor release with a single bug fix:

 - fixed intermittent loss of GPS packets on F4 and L4 GPS nodes which caused loss of GPS lock on the flight controller

Release 1.3.0 18th Mar 2022
---------------------------

This is a major release with several significant bug fixes and
improvements:

 - added new peripherals: BirdCANdy, MatekL431, CubeOrange-periph,
   G4-ESC, HerePro, Hitec-Airspeed, HolybroG4GPS, HolybroGPS,
   Sierra-F405, Sierra-F421, Sierra-F9P, Sierra-L431,
   f103-QiotekPeriph, f405-MatekGPS, f405-MatekAirspeed, mRo-M10095,
   ARK_GPS, HitecMosaic, MatekH743-periph, Pixracer-periph

 - support dshot for CAN ESC outputs

 - support a wider range of notify options

 - numerous small bug fixes

 - support lua scripting in peripherals

 - switched to DroneCAN compiler and libraries

 - support logging in peripherals

 - support dual CAN bus

 - support BLHeli monitoring of ESC telemetry

 - support mavlink in peripherals

 - support moving baseline yaw dual-GPS on dual-CAN GPS

 - support MPPT battery driver

 - fixed MSP GPS yaw

Note that the next major release will add CANFD support.

Release 1.2.0 6th Jan 2020
--------------------------

This is a major release with several significant bug fixes and
improvements:

 - support for battery monitor nodes

 - support for testing in SITL

 - improvements in error reporting to the flight controller

 - fixes to stack sizes

 - MSP output support

 - support for BGR NCP5623 LEDs

 - switched to common CAN stack with main ArduPilot vehicle code

 - added several new board types


Release 1.1.0 14th May 2020
---------------------------

This is a major release with several significant bug fixes:

 - fixed initial GPS timestamp which could cause ArduPilot to get bad
   time sync

 - fixed airspeed pressure wrap

 - fixed rangefinder to send the RNGFND1_ADDR as sensor_id

 - added distinctive LED blink pattern when waiting for UAVCAN node ID
   allocation

 - added HWESC build targets for HobbyWing ESC telemetry

 - fixed RM3100 compass scaling bug

Release 1.0.0 9th November 2019
-------------------------------

Initial stable release