#pragma once

#include <AP_HAL/AP_HAL.h>
#include <AP_Param/AP_Param.h>
#include <AP_GPS/AP_GPS.h>
#include <AP_Compass/AP_Compass.h>
#include <AP_Baro/AP_Baro.h>
#include <AP_Airspeed/AP_Airspeed.h>
#include <AP_RangeFinder/AP_RangeFinder.h>
#include <AP_MSP/AP_MSP.h>
#include <AP_MSP/msp.h>
#include "../AP_Bootloader/app_comms.h"
#include "hwing_esc.h"

#if defined(HAL_PERIPH_NEOPIXEL_COUNT) || defined(HAL_PERIPH_ENABLE_NCP5623_LED)
#define AP_PERIPH_HAVE_LED
#endif

#include "Parameters.h"

#if CONFIG_HAL_BOARD == HAL_BOARD_SITL
void stm32_watchdog_init();
void stm32_watchdog_pat();
#endif
/*
  app descriptor compatible with MissionPlanner
 */
extern const struct app_descriptor app_descriptor;

class AP_Periph_FW {
public:
    void init();
    void update();

    Parameters g;

    void can_start();
    void can_update();
    void can_mag_update();
    void can_gps_update();
    void can_baro_update();
    void can_airspeed_update();
    void can_rangefinder_update();

    void load_parameters();

    AP_SerialManager serial_manager;

#ifdef HAL_PERIPH_ENABLE_GPS
    AP_GPS gps;
#endif

#ifdef HAL_PERIPH_ENABLE_MAG
    Compass compass;
#endif

#ifdef HAL_PERIPH_ENABLE_BARO
    AP_Baro baro;
#endif

#ifdef HAL_PERIPH_ENABLE_MSP
    struct {
        AP_MSP msp;
        MSP::msp_port_t port;
        uint32_t last_gps_ms;
        uint32_t last_baro_ms;
        uint32_t last_mag_ms;
    } msp;
    void msp_init(AP_HAL::UARTDriver *_uart);
    void msp_sensor_update(void);
    void send_msp_packet(uint16_t cmd, void *p, uint16_t size);
    void send_msp_GPS(void);
    void send_msp_compass(void);
    void send_msp_baro(void);
#endif
    
#ifdef HAL_PERIPH_ENABLE_ADSB
    void adsb_init();
    void adsb_update();
    void can_send_ADSB(struct __mavlink_adsb_vehicle_t &msg);
    struct {
        mavlink_message_t msg;
        mavlink_status_t status;
    } adsb;
#endif

#ifdef HAL_PERIPH_ENABLE_AIRSPEED
    AP_Airspeed airspeed;
#endif

#ifdef HAL_PERIPH_ENABLE_RANGEFINDER
    RangeFinder rangefinder;
#endif

#ifdef HAL_PERIPH_ENABLE_PWM_HARDPOINT
    void pwm_irq_handler(uint8_t pin, bool pin_state, uint32_t timestamp);
    void pwm_hardpoint_init();
    void pwm_hardpoint_update();
    struct {
        uint8_t last_state;
        uint32_t last_ts_us;
        uint32_t last_send_ms;
        uint16_t pwm_value;
        uint16_t highest_pwm;
    } pwm_hardpoint;
#endif

#ifdef HAL_PERIPH_ENABLE_HWESC
    HWESC_Telem hwesc_telem;
    void hwesc_telem_update();
#endif
    
    // setup the var_info table
    AP_Param param_loader{var_info};

    static const AP_Param::Info var_info[];

    uint32_t last_mag_update_ms;
    uint32_t last_gps_update_ms;
    uint32_t last_baro_update_ms;
    uint32_t last_airspeed_update_ms;
};

extern AP_Periph_FW periph;

extern "C" {
void can_printf(const char *fmt, ...);
}