#pragma once #include #include #include class AR_AttitudeControl { public: // constructor AR_AttitudeControl(); // do not allow copying CLASS_NO_COPY(AR_AttitudeControl); static AR_AttitudeControl *get_singleton() { return _singleton; } // // steering controller // // return a steering servo output given a desired lateral acceleration rate in m/s/s. // positive lateral acceleration is to the right. dt should normally be the main loop rate. // return value is normally in range -1.0 to +1.0 but can be higher or lower float get_steering_out_lat_accel(float desired_accel, bool motor_limit_left, bool motor_limit_right, float dt); // return a steering servo output given a heading in radians // set rate_max_rads to a non-zero number to apply a limit on the desired turn rate // return value is normally in range -1.0 to +1.0 but can be higher or lower float get_steering_out_heading(float heading_rad, float rate_max_rads, bool motor_limit_left, bool motor_limit_right, float dt); // return a desired turn-rate given a desired heading in radians // normally the results are later passed into get_steering_out_rate float get_turn_rate_from_heading(float heading_rad, float rate_max_rads) const; // return a steering servo output given a desired yaw rate in radians/sec. // positive yaw is to the right // return value is normally in range -1.0 to +1.0 but can be higher or lower // also sets steering_limit_left and steering_limit_right flags float get_steering_out_rate(float desired_rate, bool motor_limit_left, bool motor_limit_right, float dt); // get latest desired turn rate in rad/sec recorded during calls to get_steering_out_rate. For reporting purposes only float get_desired_turn_rate() const; // get latest desired lateral acceleration in m/s/s recorded during calls to get_steering_out_lat_accel. For reporting purposes only float get_desired_lat_accel() const; // get actual lateral acceleration in m/s/s. returns true on success. For reporting purposes only bool get_lat_accel(float &lat_accel) const; // calculate the turn rate in rad/sec given a lateral acceleration (in m/s/s) and speed (in m/s) float get_turn_rate_from_lat_accel(float lat_accel, float speed) const; // get the lateral acceleration limit (in m/s/s). Returns at least 0.1G or approximately 1 m/s/s float get_turn_lat_accel_max() const { return MAX(_turn_lateral_G_max, 0.1f) * GRAVITY_MSS; } // returns true if the steering has been limited which can be caused by the physical steering surface // reaching its physical limits (aka motor limits) or acceleration or turn rate limits being applied bool steering_limit_left() const { return _steering_limit_left; } bool steering_limit_right() const { return _steering_limit_right; } // // throttle / speed controller // // set limits used by throttle controller // forward/back acceleration max in m/s/s // forward/back deceleartion max in m/s/s void set_throttle_limits(float throttle_accel_max, float throttle_decel_max); // return a throttle output from -1 to +1 given a desired speed in m/s (use negative speeds to travel backwards) // desired_speed argument should already have been passed through get_desired_speed_accel_limited function // motor_limit should be true if motors have hit their upper or lower limits // cruise speed should be in m/s, cruise throttle should be a number from -1 to +1 float get_throttle_out_speed(float desired_speed, bool motor_limit_low, bool motor_limit_high, float cruise_speed, float cruise_throttle, float dt); // return a throttle output from -1 to +1 to perform a controlled stop. stopped is set to true once stop has been completed float get_throttle_out_stop(bool motor_limit_low, bool motor_limit_high, float cruise_speed, float cruise_throttle, float dt, bool &stopped); // balancebot pitch to throttle controller // returns a throttle output from -1 to +1 given a desired pitch angle (in radians) // pitch_max should be the user defined max pitch angle (in radians) // motor_limit should be true if the motors have hit their upper or lower limit float get_throttle_out_from_pitch(float desired_pitch, float pitch_max, bool motor_limit, float dt); // returns true if the pitch angle has been limited to prevent falling over // pitch limit protection is implemented within get_throttle_out_from_pitch bool pitch_limited() const { return _pitch_limited; } // get latest desired pitch in radians for reporting purposes float get_desired_pitch() const; // Sailboat heel(roll) angle contorller, release sail to keep at maximum heel angle float get_sail_out_from_heel(float desired_heel, float dt); // low level control accessors for reporting and logging AC_P& get_steering_angle_p() { return _steer_angle_p; } AC_PID& get_steering_rate_pid() { return _steer_rate_pid; } AC_PID& get_pitch_to_throttle_pid() { return _pitch_to_throttle_pid; } AC_PID& get_sailboat_heel_pid() { return _sailboat_heel_pid; } const AP_PIDInfo& get_throttle_speed_pid_info() const { return _throttle_speed_pid_info; } // set the PID notch sample rates void set_notch_sample_rate(float sample_rate); // get the slew rate value for speed and steering for oscillation detection in lua scripts void get_srate(float &steering_srate, float &speed_srate); // get forward speed in m/s (earth-frame horizontal velocity but only along vehicle x-axis). returns true on success bool get_forward_speed(float &speed) const; // get throttle/speed controller maximum acceleration (also used for deceleration) float get_accel_max() const { return MAX(_throttle_accel_max, 0.0f); } // get throttle/speed controller maximum deceleration float get_decel_max() const; // check if speed controller active bool speed_control_active() const; // get latest desired speed recorded during call to get_throttle_out_speed. For reporting purposes only float get_desired_speed() const; // get acceleration limited desired speed float get_desired_speed_accel_limited(float desired_speed, float dt) const; // get minimum stopping distance (in meters) given a speed (in m/s) float get_stopping_distance(float speed) const; // get speed below which vehicle is considered stopped (in m/s) float get_stop_speed() const { return MAX(_stop_speed, 0.0f); } // relax I terms of throttle and steering controllers void relax_I(); // parameter var table static const struct AP_Param::GroupInfo var_info[]; private: static AR_AttitudeControl *_singleton; // parameters AC_P _steer_angle_p; // steering angle controller AC_PID _steer_rate_pid; // steering rate controller AC_PID _throttle_speed_pid; // throttle speed controller AC_PID _pitch_to_throttle_pid;// balancebot pitch controller AP_Float _pitch_to_throttle_ff; // balancebot feed forward from current pitch angle AP_Float _pitch_limit_tc; // balancebot pitch limit protection time constant AP_Float _pitch_limit_throttle_thresh; // balancebot pitch limit throttle threshold (in the range 0 to 1.0) AP_Float _throttle_accel_max; // speed/throttle control acceleration (and deceleration) maximum in m/s/s. 0 to disable limits AP_Float _throttle_decel_max; // speed/throttle control deceleration maximum in m/s/s. 0 to use ATC_ACCEL_MAX for deceleration AP_Int8 _brake_enable; // speed control brake enable/disable. if set to 1 a reversed output to the motors to slow the vehicle. AP_Float _stop_speed; // speed control stop speed. Motor outputs to zero once vehicle speed falls below this value AP_Float _steer_accel_max; // steering angle acceleration max in deg/s/s AP_Float _steer_rate_max; // steering rate control maximum rate in deg/s AP_Float _turn_lateral_G_max; // sterring maximum lateral acceleration limit in 'G' // steering control uint32_t _steer_lat_accel_last_ms; // system time of last call to lateral acceleration controller (i.e. get_steering_out_lat_accel) uint32_t _steer_turn_last_ms; // system time of last call to steering rate controller float _desired_lat_accel; // desired lateral acceleration (in m/s/s) from latest call to get_steering_out_lat_accel (for reporting purposes) float _desired_turn_rate; // desired turn rate (in radians/sec) either from external caller or from lateral acceleration controller bool _steering_limit_left; // true when the steering control has reached its left limit (e.g. motor has reached limits or accel or turn rate limits applied) bool _steering_limit_right; // true when the steering control has reached its right limit (e.g. motor has reached limits or accel or turn rate limits applied) // throttle control uint32_t _speed_last_ms; // system time of last call to get_throttle_out_speed float _desired_speed; // last recorded desired speed uint32_t _stop_last_ms; // system time the vehicle was at a complete stop bool _throttle_limit_low; // throttle output was limited from going too low (used to reduce i-term buildup) bool _throttle_limit_high; // throttle output was limited from going too high (used to reduce i-term buildup) AP_PIDInfo _throttle_speed_pid_info; // local copy of throttle_speed controller's PID info to allow reporting of unusual FF // balancebot pitch control uint32_t _balance_last_ms = 0; // system time that get_throttle_out_from_pitch was last called float _pitch_limit_low = 0; // min desired pitch (in radians) used to protect against falling over float _pitch_limit_high = 0; // max desired pitch (in radians) used to protect against falling over bool _pitch_limited = false; // true if pitch was limited on last call to get_throttle_out_from_pitch // Sailboat heel control AC_PID _sailboat_heel_pid; // Sailboat heel angle pid controller uint32_t _heel_controller_last_ms = 0; };