/* Siyi gimbal driver using custom serial protocol Packet format (courtesy of Siyi's SDK document) ------------------------------------------------------------------------------------------- Field Index Bytes Description ------------------------------------------------------------------------------------------- STX 0 2 0x5566: starting mark CTRL 2 1 bit 0: need_ack. set if the current data packet needs ack bit 1: ack_pack. set if the current data packate IS an ack bit 2-7: reserved Data_len 3 2 Data field byte length. Low byte in the front SEQ 5 2 Frame sequence (0 ~ 65535). Low byte in the front. May be used to detect packet loss CMD_ID 7 1 Command ID DATA 8 Data_len Data CRC16 2 CRC16 check the complete data package. Low byte in the front */ #pragma once #include "AP_Mount_Backend.h" #if HAL_MOUNT_SIYI_ENABLED #include #include #include #define AP_MOUNT_SIYI_PACKETLEN_MAX 22 // maximum number of bytes in a packet sent to or received from the gimbal class AP_Mount_Siyi : public AP_Mount_Backend { public: // Constructor using AP_Mount_Backend::AP_Mount_Backend; /* Do not allow copies */ CLASS_NO_COPY(AP_Mount_Siyi); // init - performs any required initialisation for this instance void init() override; // update mount position - should be called periodically void update() override; // return true if healthy bool healthy() const override; // return true if this mount accepts roll targets bool has_roll_control() const override { return false; } // has_pan_control - returns true if this mount can control its pan (required for multicopters) bool has_pan_control() const override { return yaw_range_valid(); }; // // camera controls // // take a picture. returns true on success bool take_picture() override; // start or stop video recording // set start_recording = true to start record, false to stop recording bool record_video(bool start_recording) override; // set zoom specified as a rate or percentage bool set_zoom(ZoomType zoom_type, float zoom_value) override; // set focus specified as rate, percentage or auto // focus in = -1, focus hold = 0, focus out = 1 SetFocusResult set_focus(FocusType focus_type, float focus_value) override; // send camera information message to GCS void send_camera_information(mavlink_channel_t chan) const override; // send camera settings message to GCS void send_camera_settings(mavlink_channel_t chan) const override; protected: // get attitude as a quaternion. returns true on success bool get_attitude_quaternion(Quaternion& att_quat) override; private: // serial protocol command ids enum class SiyiCommandId { ACQUIRE_FIRMWARE_VERSION = 0x01, HARDWARE_ID = 0x02, AUTO_FOCUS = 0x04, MANUAL_ZOOM_AND_AUTO_FOCUS = 0x05, MANUAL_FOCUS = 0x06, GIMBAL_ROTATION = 0x07, CENTER = 0x08, ACQUIRE_GIMBAL_CONFIG_INFO = 0x0A, FUNCTION_FEEDBACK_INFO = 0x0B, PHOTO = 0x0C, ACQUIRE_GIMBAL_ATTITUDE = 0x0D, ABSOLUTE_ZOOM = 0x0F }; // Function Feedback Info packet info_type values enum class FunctionFeedbackInfo : uint8_t { SUCCESS = 0, FAILED_TO_TAKE_PHOTO = 1, HDR_ON = 2, HDR_OFF = 3, FAILED_TO_RECORD_VIDEO = 4 }; // Photo Function packet func_type values enum class PhotoFunction : uint8_t { TAKE_PICTURE = 0, HDR_TOGGLE = 1, RECORD_VIDEO_TOGGLE = 2, LOCK_MODE = 3, FOLLOW_MODE = 4, FPV_MODE = 5 }; // parsing state enum class ParseState : uint8_t { WAITING_FOR_HEADER_LOW, WAITING_FOR_HEADER_HIGH, WAITING_FOR_CTRL, WAITING_FOR_DATALEN_LOW, WAITING_FOR_DATALEN_HIGH, WAITING_FOR_SEQ_LOW, WAITING_FOR_SEQ_HIGH, WAITING_FOR_CMDID, WAITING_FOR_DATA, WAITING_FOR_CRC_LOW, WAITING_FOR_CRC_HIGH, }; // hardware model enum enum class HardwareModel : uint8_t { UNKNOWN, A8, ZR10 } _hardware_model; // gimbal mounting method/direction enum class GimbalMountingDirection : uint8_t { UNDEFINED = 0, NORMAL = 1, UPSIDE_DOWN = 2, } _gimbal_mounting_dir; // reading incoming packets from gimbal and confirm they are of the correct format // results are held in the _parsed_msg structure void read_incoming_packets(); // process successfully decoded packets held in the _parsed_msg structure void process_packet(); // send packet to gimbal // returns true on success, false if outgoing serial buffer is full bool send_packet(SiyiCommandId cmd_id, const uint8_t* databuff, uint8_t databuff_len); bool send_1byte_packet(SiyiCommandId cmd_id, uint8_t data_byte); // request info from gimbal void request_firmware_version() { send_packet(SiyiCommandId::ACQUIRE_FIRMWARE_VERSION, nullptr, 0); } void request_hardware_id() { send_packet(SiyiCommandId::HARDWARE_ID, nullptr, 0); } void request_configuration() { send_packet(SiyiCommandId::ACQUIRE_GIMBAL_CONFIG_INFO, nullptr, 0); } void request_function_feedback_info() { send_packet(SiyiCommandId::FUNCTION_FEEDBACK_INFO, nullptr, 0); } void request_gimbal_attitude() { send_packet(SiyiCommandId::ACQUIRE_GIMBAL_ATTITUDE, nullptr, 0); } // rotate gimbal. pitch_rate and yaw_rate are scalars in the range -100 ~ +100 // yaw_is_ef should be true if gimbal should maintain an earth-frame target (aka lock) void rotate_gimbal(int8_t pitch_scalar, int8_t yaw_scalar, bool yaw_is_ef); // set gimbal's lock vs follow mode // lock should be true if gimbal should maintain an earth-frame target // lock is false to follow / maintain a body-frame target void set_lock(bool lock); // send target pitch and yaw rates to gimbal // yaw_is_ef should be true if yaw_rads target is an earth frame rate, false if body_frame void send_target_rates(float pitch_rads, float yaw_rads, bool yaw_is_ef); // send target pitch and yaw angles to gimbal // yaw_is_ef should be true if yaw_rad target is an earth frame angle, false if body_frame void send_target_angles(float pitch_rad, float yaw_rad, bool yaw_is_ef); // send zoom rate command to camera. zoom out = -1, hold = 0, zoom in = 1 bool send_zoom_rate(float zoom_value); // send zoom multiple command to camera. e.g. 1x, 10x, 30x // only supported by ZR10 and ZR30 bool send_zoom_mult(float zoom_mult); // get zoom multiple max float get_zoom_mult_max() const; // update absolute zoom controller // only used for A8 that does not support abs zoom control void update_zoom_control(); // internal variables AP_HAL::UARTDriver *_uart; // uart connected to gimbal bool _initialised; // true once the driver has been initialised bool _got_firmware_version; // true once gimbal firmware version has been received struct { uint8_t major; uint8_t minor; uint8_t patch; } _cam_firmware_version; // camera firmware version (for reporting for GCS) // buffer holding bytes from latest packet. This is only used to calculate the crc uint8_t _msg_buff[AP_MOUNT_SIYI_PACKETLEN_MAX]; uint8_t _msg_buff_len; const uint8_t _msg_buff_data_start = 8; // data starts at this byte of _msg_buff // parser state and unpacked fields struct PACKED { uint16_t data_len; // expected number of data bytes uint8_t command_id; // command id uint16_t data_bytes_received; // number of data bytes received so far uint16_t crc16; // latest message's crc ParseState state; // state of incoming message processing } _parsed_msg; // variables for sending packets to gimbal uint32_t _last_send_ms; // system time (in milliseconds) of last packet sent to gimbal uint16_t _last_seq; // last sequence number used (should be increment for each send) bool _last_lock; // last lock value sent to gimbal uint8_t _lock_send_counter; // counter used to resend lock status to gimbal at regular intervals // actual attitude received from gimbal Vector3f _current_angle_rad; // current angles in radians received from gimbal (x=roll, y=pitch, z=yaw) uint32_t _last_current_angle_rad_ms; // system time _current_angle_rad was updated uint32_t _last_req_current_angle_rad_ms; // system time that this driver last requested current angle // variables for camera state bool _last_record_video; // last record_video state sent to gimbal // absolute zoom control. only used for A8 that does not support abs zoom control float _zoom_mult_target; // current zoom multiple target. 0 if no target float _zoom_mult; // most recent actual zoom multiple received from camera uint32_t _last_zoom_control_ms; // system time that zoom control was last run }; #endif // HAL_MOUNT_SIYISERIAL_ENABLED