/*
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
//
// Copyright (c) 2010 Michael Smith. All rights reserved.
//
#include
#if CONFIG_HAL_BOARD == HAL_BOARD_SITL
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include "UARTDriver.h"
#include "SITL_State.h"
#include
extern const AP_HAL::HAL& hal;
using namespace HALSITL;
bool UARTDriver::_console;
/* UARTDriver method implementations */
void UARTDriver::begin(uint32_t baud, uint16_t rxSpace, uint16_t txSpace)
{
if (_portNumber >= ARRAY_SIZE(_sitlState->_uart_path)) {
AP_HAL::panic("port number out of range; you may need to extend _sitlState->_uart_path");
}
const char *path = _sitlState->_uart_path[_portNumber];
if (baud != 0) {
_uart_baudrate = baud;
}
if (strcmp(path, "GPS1") == 0) {
/* gps */
_connected = true;
_fd = _sitlState->gps_pipe(0);
} else if (strcmp(path, "GPS2") == 0) {
/* 2nd gps */
_connected = true;
_fd = _sitlState->gps_pipe(1);
} else {
/* parse type:args:flags string for path.
For example:
tcp:5760:wait // tcp listen on port 5760
tcp:0:wait // tcp listen on use base_port + 0
tcpclient:192.168.2.15:5762
udpclient:127.0.0.1
udpclient:127.0.0.1:14550
mcast:
mcast:239.255.145.50:14550
uart:/dev/ttyUSB0:57600
sim:ParticleSensor_SDS021:
*/
char *saveptr = nullptr;
char *s = strdup(path);
char *devtype = strtok_r(s, ":", &saveptr);
char *args1 = strtok_r(nullptr, ":", &saveptr);
char *args2 = strtok_r(nullptr, ":", &saveptr);
if (strcmp(devtype, "tcp") == 0) {
uint16_t port = atoi(args1);
bool wait = (args2 && strcmp(args2, "wait") == 0);
_tcp_start_connection(port, wait);
} else if (strcmp(devtype, "tcpclient") == 0) {
if (args2 == nullptr) {
AP_HAL::panic("Invalid tcp client path: %s", path);
}
uint16_t port = atoi(args2);
_tcp_start_client(args1, port);
} else if (strcmp(devtype, "uart") == 0) {
uint32_t baudrate = args2? atoi(args2) : baud;
::printf("UART connection %s:%u\n", args1, baudrate);
_uart_path = strdup(args1);
_uart_baudrate = baudrate;
_uart_start_connection();
} else if (strcmp(devtype, "sim") == 0) {
if (!_connected) {
::printf("SIM connection %s:%s on port %u\n", args1, args2, _portNumber);
_connected = true;
_fd = _sitlState->sim_fd(args1, args2);
_fd_write = _sitlState->sim_fd_write(args1);
}
} else if (strcmp(devtype, "udpclient") == 0) {
// udp client connection
const char *ip = args1;
uint16_t port = args2?atoi(args2):14550;
if (!_connected) {
::printf("UDP connection %s:%u\n", ip, port);
_udp_start_client(ip, port);
}
} else if (strcmp(devtype, "mcast") == 0) {
// udp multicast connection
const char *ip = args1 && *args1?args1:mcast_ip_default;
uint16_t port = args2?atoi(args2):mcast_port_default;
if (!_connected) {
::printf("UDP multicast connection %s:%u\n", ip, port);
_udp_start_multicast(ip, port);
}
} else {
AP_HAL::panic("Invalid device path: %s", path);
}
free(s);
}
if (hal.console != this) { // don't clear USB buffers (allows early startup messages to escape)
_readbuffer.clear();
_writebuffer.clear();
}
_set_nonblocking(_fd);
}
void UARTDriver::end()
{
}
uint32_t UARTDriver::available(void)
{
_check_connection();
if (!_connected) {
return 0;
}
return _readbuffer.available();
}
uint32_t UARTDriver::txspace(void)
{
_check_connection();
if (!_connected) {
return 0;
}
return _writebuffer.space();
}
int16_t UARTDriver::read(void)
{
if (available() <= 0) {
return -1;
}
uint8_t c;
_readbuffer.read(&c, 1);
return c;
}
bool UARTDriver::discard_input(void)
{
_readbuffer.empty();
return true;
}
void UARTDriver::flush(void)
{
}
// size_t UARTDriver::write(uint8_t c)
// {
// if (txspace() <= 0) {
// return 0;
// }
// _writebuffer.write(&c, 1);
// return 1;
// }
size_t UARTDriver::write(uint8_t c)
{
return write(&c, 1);
}
size_t UARTDriver::write(const uint8_t *buffer, size_t size)
{
if (txspace() <= size) {
size = txspace();
}
if (size <= 0) {
return 0;
}
if (_unbuffered_writes) {
// write buffer straight to the file descriptor
int fd = _fd_write;
if (fd == -1) {
fd = _fd;
}
const ssize_t nwritten = ::write(fd, buffer, size);
if (nwritten == -1 && errno != EAGAIN && _uart_path) {
if (_fd_write != -1) {
close(_fd_write);
_fd_write = -1;
}
close(_fd);
_fd = -1;
_connected = false;
}
// these have no effect
tcdrain(_fd);
} else {
_writebuffer.write(buffer, size);
}
return size;
}
/*
start a TCP connection for the serial port. If wait_for_connection
is true then block until a client connects
*/
void UARTDriver::_tcp_start_connection(uint16_t port, bool wait_for_connection)
{
int one=1;
struct sockaddr_in sockaddr;
int ret;
if (_connected) {
return;
}
_use_send_recv = true;
if (_console) {
// hack for console access
_connected = true;
_use_send_recv = false;
_listen_fd = -1;
_fd = 1;
return;
}
if (_fd != -1) {
close(_fd);
}
if (_listen_fd == -1) {
memset(&sockaddr,0,sizeof(sockaddr));
#ifdef HAVE_SOCK_SIN_LEN
sockaddr.sin_len = sizeof(sockaddr);
#endif
if (port > 1000) {
sockaddr.sin_port = htons(port);
} else {
sockaddr.sin_port = htons(_sitlState->base_port() + port);
}
sockaddr.sin_family = AF_INET;
_listen_fd = socket(AF_INET, SOCK_STREAM, 0);
if (_listen_fd == -1) {
fprintf(stderr, "socket failed - %s\n", strerror(errno));
exit(1);
}
ret = fcntl(_listen_fd, F_SETFD, FD_CLOEXEC);
if (ret == -1) {
fprintf(stderr, "fcntl failed on setting FD_CLOEXEC - %s\n", strerror(errno));
exit(1);
}
/* we want to be able to re-use ports quickly */
if (setsockopt(_listen_fd, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one)) == -1) {
fprintf(stderr, "setsockopt failed: %s\n", strerror(errno));
exit(1);
}
fprintf(stderr, "bind port %u for %u\n",
(unsigned)ntohs(sockaddr.sin_port),
(unsigned)_portNumber);
ret = bind(_listen_fd, (struct sockaddr *)&sockaddr, sizeof(sockaddr));
if (ret == -1) {
fprintf(stderr, "bind failed on port %u - %s\n",
(unsigned)ntohs(sockaddr.sin_port),
strerror(errno));
exit(1);
}
ret = listen(_listen_fd, 5);
if (ret == -1) {
fprintf(stderr, "listen failed - %s\n", strerror(errno));
exit(1);
}
fprintf(stderr, "Serial port %u on TCP port %u\n", _portNumber,
(unsigned)ntohs(sockaddr.sin_port));
fflush(stdout);
}
if (wait_for_connection) {
fprintf(stdout, "Waiting for connection ....\n");
fflush(stdout);
_fd = accept(_listen_fd, nullptr, nullptr);
if (_fd == -1) {
fprintf(stderr, "accept() error - %s", strerror(errno));
exit(1);
}
setsockopt(_fd, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one));
setsockopt(_fd, IPPROTO_TCP, TCP_NODELAY, &one, sizeof(one));
fcntl(_fd, F_SETFD, FD_CLOEXEC);
_connected = true;
fprintf(stdout, "Connection on serial port %u\n", (unsigned)ntohs(sockaddr.sin_port));
}
}
/*
start a TCP client connection for the serial port.
*/
void UARTDriver::_tcp_start_client(const char *address, uint16_t port)
{
int one=1;
struct sockaddr_in sockaddr;
int ret;
if (_connected) {
return;
}
_use_send_recv = true;
if (_fd != -1) {
close(_fd);
}
memset(&sockaddr,0,sizeof(sockaddr));
#ifdef HAVE_SOCK_SIN_LEN
sockaddr.sin_len = sizeof(sockaddr);
#endif
sockaddr.sin_port = htons(port);
sockaddr.sin_family = AF_INET;
sockaddr.sin_addr.s_addr = inet_addr(address);
_fd = socket(AF_INET, SOCK_STREAM, 0);
if (_fd == -1) {
fprintf(stderr, "socket failed - %s\n", strerror(errno));
exit(1);
}
ret = fcntl(_fd, F_SETFD, FD_CLOEXEC);
if (ret == -1) {
fprintf(stderr, "fcntl failed on setting FD_CLOEXEC - %s\n", strerror(errno));
exit(1);
}
/* we want to be able to re-use ports quickly */
setsockopt(_fd, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one));
ret = connect(_fd, (struct sockaddr *)&sockaddr, sizeof(sockaddr));
if (ret == -1) {
fprintf(stderr, "connect failed on port %u - %s\n",
(unsigned)ntohs(sockaddr.sin_port),
strerror(errno));
exit(1);
}
setsockopt(_fd, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one));
setsockopt(_fd, IPPROTO_TCP, TCP_NODELAY, &one, sizeof(one));
fcntl(_fd, F_SETFD, FD_CLOEXEC);
_connected = true;
}
/*
start a UDP client connection for the serial port.
*/
void UARTDriver::_udp_start_client(const char *address, uint16_t port)
{
struct sockaddr_in sockaddr;
int ret;
if (_connected) {
return;
}
_use_send_recv = true;
if (_fd != -1) {
close(_fd);
}
memset(&sockaddr,0,sizeof(sockaddr));
#ifdef HAVE_SOCK_SIN_LEN
sockaddr.sin_len = sizeof(sockaddr);
#endif
sockaddr.sin_port = htons(port);
sockaddr.sin_family = AF_INET;
sockaddr.sin_addr.s_addr = inet_addr(address);
_fd = socket(AF_INET, SOCK_DGRAM, 0);
if (_fd == -1) {
fprintf(stderr, "socket failed - %s\n", strerror(errno));
exit(1);
}
ret = fcntl(_fd, F_SETFD, FD_CLOEXEC);
if (ret == -1) {
fprintf(stderr, "fcntl failed on setting FD_CLOEXEC - %s\n", strerror(errno));
exit(1);
}
// try to setup for broadcast, this may fail if insufficient privileges
int one = 1;
setsockopt(_fd,SOL_SOCKET,SO_BROADCAST,(char *)&one,sizeof(one));
ret = connect(_fd, (struct sockaddr *)&sockaddr, sizeof(sockaddr));
if (ret == -1) {
fprintf(stderr, "udp connect failed on port %u - %s\n",
(unsigned)ntohs(sockaddr.sin_port),
strerror(errno));
exit(1);
}
_is_udp = true;
_packetise = true;
_connected = true;
}
/*
start a UDP multicast connection
*/
void UARTDriver::_udp_start_multicast(const char *address, uint16_t port)
{
if (_connected) {
return;
}
// establish the listening port
struct sockaddr_in sockaddr;
int ret;
memset(&sockaddr,0,sizeof(sockaddr));
#ifdef HAVE_SOCK_SIN_LEN
sockaddr.sin_len = sizeof(sockaddr);
#endif
sockaddr.sin_port = htons(port);
sockaddr.sin_family = AF_INET;
sockaddr.sin_addr.s_addr = inet_addr(address);
_mc_fd = socket(AF_INET, SOCK_DGRAM, 0);
if (_mc_fd == -1) {
fprintf(stderr, "socket failed - %s\n", strerror(errno));
exit(1);
}
ret = fcntl(_mc_fd, F_SETFD, FD_CLOEXEC);
if (ret == -1) {
fprintf(stderr, "fcntl failed on setting FD_CLOEXEC - %s\n", strerror(errno));
exit(1);
}
int one = 1;
if (setsockopt(_mc_fd, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one)) == -1) {
fprintf(stderr, "setsockopt failed: %s\n", strerror(errno));
exit(1);
}
// close on exec, to allow reboot
fcntl(_mc_fd, F_SETFD, FD_CLOEXEC);
ret = bind(_mc_fd, (struct sockaddr *)&sockaddr, sizeof(sockaddr));
if (ret == -1) {
fprintf(stderr, "multicast bind failed on port %u - %s\n",
(unsigned)ntohs(sockaddr.sin_port),
strerror(errno));
exit(1);
}
struct ip_mreq mreq {};
mreq.imr_multiaddr.s_addr = inet_addr(address);
mreq.imr_interface.s_addr = htonl(INADDR_ANY);
ret = setsockopt(_mc_fd, IPPROTO_IP, IP_ADD_MEMBERSHIP, &mreq, sizeof(mreq));
if (ret == -1) {
fprintf(stderr, "multicast membership add failed on port %u - %s\n",
(unsigned)ntohs(sockaddr.sin_port),
strerror(errno));
exit(1);
}
// now start the outgoing connection as an ordinary UDP connection
_udp_start_client(address, port);
}
/*
start a UART connection for the serial port
*/
void UARTDriver::_uart_start_connection(void)
{
struct termios t {};
if (!_connected) {
_fd = ::open(_uart_path, O_RDWR | O_CLOEXEC);
if (_fd == -1) {
return;
}
// use much smaller buffer sizes on real UARTs
_writebuffer.set_size(1024);
_readbuffer.set_size(512);
::printf("Opened %s\n", _uart_path);
}
if (_fd == -1) {
AP_HAL::panic("Unable to open UART %s", _uart_path);
}
// set non-blocking
int flags = fcntl(_fd, F_GETFL, 0);
flags = flags | O_NONBLOCK;
fcntl(_fd, F_SETFL, flags);
// disable LF -> CR/LF
tcgetattr(_fd, &t);
t.c_iflag &= ~(BRKINT | ICRNL | IMAXBEL | IXON | IXOFF);
t.c_oflag &= ~(OPOST | ONLCR);
t.c_lflag &= ~(ISIG | ICANON | IEXTEN | ECHO | ECHOE | ECHOK | ECHOCTL | ECHOKE);
t.c_cc[VMIN] = 0;
if (_sitlState->use_rtscts()) {
t.c_cflag |= CRTSCTS;
}
tcsetattr(_fd, TCSANOW, &t);
// set baudrate
set_speed(_uart_baudrate);
_connected = true;
_use_send_recv = false;
}
/*
see if a new connection is coming in
*/
void UARTDriver::_check_connection(void)
{
if (_connected) {
// we only want 1 connection at a time
return;
}
if (_select_check(_listen_fd)) {
_fd = accept(_listen_fd, nullptr, nullptr);
if (_fd != -1) {
int one = 1;
_connected = true;
setsockopt(_fd, IPPROTO_TCP, TCP_NODELAY, &one, sizeof(one));
setsockopt(_fd, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one));
fcntl(_fd, F_SETFD, FD_CLOEXEC);
fprintf(stdout, "New connection on serial port %u\n", _portNumber);
}
}
}
/*
use select() to see if something is pending
*/
bool UARTDriver::_select_check(int fd)
{
if (fd == -1) {
return false;
}
fd_set fds;
struct timeval tv;
FD_ZERO(&fds);
FD_SET(fd, &fds);
// zero time means immediate return from select()
tv.tv_sec = 0;
tv.tv_usec = 0;
if (select(fd+1, &fds, nullptr, nullptr, &tv) == 1) {
return true;
}
return false;
}
void UARTDriver::_set_nonblocking(int fd)
{
unsigned v = fcntl(fd, F_GETFL, 0);
fcntl(fd, F_SETFL, v | O_NONBLOCK);
}
bool UARTDriver::set_unbuffered_writes(bool on) {
if (_fd == -1) {
return false;
}
_unbuffered_writes = on;
// this has no effect
unsigned v = fcntl(_fd, F_GETFL, 0);
v &= ~O_NONBLOCK;
#if defined(__APPLE__) && defined(__MACH__)
fcntl(_fd, F_SETFL | F_NOCACHE, v | O_SYNC);
#else
fcntl(_fd, F_SETFL, v | O_DIRECT | O_SYNC);
#endif
return _unbuffered_writes;
}
void UARTDriver::_check_reconnect(void)
{
if (!_uart_path) {
return;
}
_uart_start_connection();
}
void UARTDriver::_timer_tick(void)
{
if (!_connected) {
_check_reconnect();
return;
}
ssize_t nwritten;
uint32_t max_bytes = 10000;
SITL::SITL *_sitl = AP::sitl();
if (_sitl && _sitl->telem_baudlimit_enable) {
// limit byte rate to configured baudrate
uint32_t now = AP_HAL::micros();
float dt = 1.0e-6 * (now - last_tick_us);
max_bytes = _uart_baudrate * dt / 10;
if (max_bytes == 0) {
return;
}
last_tick_us = now;
}
if (_packetise) {
uint16_t n = _writebuffer.available();
n = MIN(n, max_bytes);
if (n > 0) {
n = mavlink_packetise(_writebuffer, n);
}
if (n > 0) {
// keep as a single UDP packet
uint8_t tmpbuf[n];
_writebuffer.peekbytes(tmpbuf, n);
ssize_t ret = send(_fd, tmpbuf, n, MSG_DONTWAIT);
if (ret > 0) {
_writebuffer.advance(ret);
}
}
} else {
uint32_t navail;
const uint8_t *readptr = _writebuffer.readptr(navail);
if (readptr && navail > 0) {
navail = MIN(navail, max_bytes);
if (!_use_send_recv) {
int fd = _fd_write;
if (fd == -1) {
fd = _fd;
}
nwritten = ::write(fd, readptr, navail);
if (nwritten == -1 && errno != EAGAIN && _uart_path) {
if (_fd_write != -1){
close(_fd_write);
_fd_write = -1;
}
close(_fd);
_fd = -1;
_connected = false;
}
} else {
nwritten = send(_fd, readptr, navail, MSG_DONTWAIT);
}
if (nwritten > 0) {
_writebuffer.advance(nwritten);
}
}
}
uint32_t space = _readbuffer.space();
if (space == 0) {
return;
}
space = MIN(space, max_bytes);
char buf[space];
ssize_t nread = 0;
if (_mc_fd >= 0) {
if (_select_check(_mc_fd)) {
struct sockaddr_in from;
socklen_t fromlen = sizeof(from);
nread = recvfrom(_mc_fd, buf, space, MSG_DONTWAIT, (struct sockaddr *)&from, &fromlen);
uint16_t port = ntohs(from.sin_port);
if (_mc_myport == 0) {
// get our own address, so we can recognise packets from ourself
struct sockaddr_in myaddr;
socklen_t myaddrlen;
if (getsockname(_fd, (struct sockaddr *)&myaddr, &myaddrlen) == 0) {
_mc_myport = ntohs(myaddr.sin_port);
}
}
if (_mc_myport == port) {
// assume this is a packet from ourselves. This is not
// entirely accurate, as it could be a packet from
// another machine that has assigned the same port,
// unfortunately we don't have a better way to detect
// packets from ourselves
nread = 0;
}
}
} else if (!_use_send_recv) {
if (!_select_check(_fd)) {
return;
}
int fd = _console?0:_fd;
nread = ::read(fd, buf, space);
if (nread == -1 && errno != EAGAIN && _uart_path) {
close(_fd);
_fd = -1;
_connected = false;
}
} else if (_select_check(_fd)) {
nread = recv(_fd, buf, space, MSG_DONTWAIT);
if (nread <= 0 && !_is_udp) {
// the socket has reached EOF
close(_fd);
_fd = -1;
_connected = false;
fprintf(stdout, "Closed connection on serial port %u\n", _portNumber);
fflush(stdout);
return;
}
}
if (nread > 0) {
_readbuffer.write((uint8_t *)buf, nread);
_receive_timestamp = AP_HAL::micros64();
}
}
/*
return timestamp estimate in microseconds for when the start of
a nbytes packet arrived on the uart. This should be treated as a
time constraint, not an exact time. It is guaranteed that the
packet did not start being received after this time, but it
could have been in a system buffer before the returned time.
This takes account of the baudrate of the link. For transports
that have no baudrate (such as USB) the time estimate may be
less accurate.
A return value of zero means the HAL does not support this API
*/
uint64_t UARTDriver::receive_time_constraint_us(uint16_t nbytes)
{
uint64_t last_receive_us = _receive_timestamp;
if (_uart_baudrate > 0) {
// assume 10 bits per byte.
uint32_t transport_time_us = (1000000UL * 10UL / _uart_baudrate) * (nbytes+available());
last_receive_us -= transport_time_us;
}
return last_receive_us;
}
ssize_t UARTDriver::get_system_outqueue_length() const
{
if (!_connected) {
return 0;
}
#if defined(__CYGWIN__) || defined(__CYGWIN64__) || defined(CYGWIN_BUILD)
return 0;
#elif defined(__APPLE__) && defined(__MACH__)
return 0;
#else
int size;
if (ioctl(_fd, TIOCOUTQ, &size) == -1) {
// ::fprintf(stderr, "ioctl TIOCOUTQ failed: %m\n");
return 0;
}
return size;
#endif
}
#endif // CONFIG_HAL_BOARD