/*
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
#include "AP_RangeFinder_config.h"
#if AP_RANGEFINDER_AINSTEIN_LR_D1_ENABLED
#ifndef AP_RANGEFINDER_AINSTEIN_LR_D1_SHOW_MALFUNCTIONS
#define AP_RANGEFINDER_AINSTEIN_LR_D1_SHOW_MALFUNCTIONS 1
#endif
#include "AP_RangeFinder_Ainstein_LR_D1.h"
#include
// get_reading - read a value from the sensor
bool AP_RangeFinder_Ainstein_LR_D1::get_reading(float &reading_m)
{
if (uart == nullptr || uart->available() == 0) {
return false;
}
bool has_data = false;
uint32_t available = MAX(uart->available(), static_cast(PACKET_SIZE*4));
while (available >= PACKET_SIZE) {
// ---------------
// Sync up with the header
const uint8_t header[] = {
0xEB, // Header MSB
0x90, // Header LSB
0x00 // Device ID
};
for (uint8_t i = 0; iread() != header[i]) {
continue;
}
}
const uint8_t rest_of_packet_size = (PACKET_SIZE - ARRAY_SIZE(header));
if (available < rest_of_packet_size) {
return false;
}
// ---------------
// header is aligned!
// ---------------
uint8_t buffer[rest_of_packet_size];
available -= uart->read(buffer, ARRAY_SIZE(buffer));
const uint8_t checksum = buffer[ARRAY_SIZE(buffer)-1]; // last byte is a checksum
if (crc_sum_of_bytes(buffer, ARRAY_SIZE(buffer)-1) != checksum) {
// bad Checksum
continue;
}
const uint8_t malfunction_alert = buffer[1];
reading_m = UINT16_VALUE(buffer[3], buffer[4]) * 0.01;
const uint8_t snr = buffer[5];
#if AP_RANGEFINDER_AINSTEIN_LR_D1_SHOW_MALFUNCTIONS
const uint32_t now_ms = AP_HAL::millis();
if (malfunction_alert_prev != malfunction_alert && now_ms - malfunction_alert_last_send_ms >= 1000) {
malfunction_alert_prev = malfunction_alert;
malfunction_alert_last_send_ms = now_ms;
report_malfunction(malfunction_alert);
}
#endif
/* From datasheet:
Altitude measurements associated with a SNR value
of 13dB or lower are considered erroneous.
SNR values of 0 are considered out of maximum range (655 metres)
The altitude measurements should not in any circumstances be used as true
measurements independently of the corresponding SNR values.
*/
signal_quality_pct = (snr <= 13 || malfunction_alert != 0) ? RangeFinder::SIGNAL_QUALITY_MIN : RangeFinder::SIGNAL_QUALITY_MAX;
if (snr <= 13) {
has_data = false;
if (snr == 0) {
state.status = RangeFinder::Status::OutOfRangeHigh;
reading_m = MAX(656, max_distance_cm() * 0.01 + 1);
} else {
state.status = RangeFinder::Status::NoData;
}
} else {
has_data = true;
state.status = RangeFinder::Status::Good;
}
}
return has_data;
}
#if AP_RANGEFINDER_AINSTEIN_LR_D1_SHOW_MALFUNCTIONS
void AP_RangeFinder_Ainstein_LR_D1::report_malfunction(const uint8_t _malfunction_alert_) {
if (_malfunction_alert_ & static_cast(MalfunctionAlert::Temperature)) {
GCS_SEND_TEXT(MAV_SEVERITY_WARNING, "RangeFinder: Temperature alert");
}
if (_malfunction_alert_ & static_cast(MalfunctionAlert::Voltage)) {
GCS_SEND_TEXT(MAV_SEVERITY_WARNING, "RangeFinder: Voltage alert");
}
if (_malfunction_alert_ & static_cast(MalfunctionAlert::IFSignalSaturation)) {
GCS_SEND_TEXT(MAV_SEVERITY_WARNING, "RangeFinder: IF signal saturation alert");
}
if (_malfunction_alert_ & static_cast(MalfunctionAlert::AltitudeReading)) {
GCS_SEND_TEXT(MAV_SEVERITY_WARNING, "RangeFinder: Altitude reading overflow alert");
}
}
#endif // AP_RANGEFINDER_AINSTEIN_LR_D1_SHOW_MALFUNCTIONS
#endif // AP_RANGEFINDER_AINSTEIN_LR_D1_ENABLED