#pragma once

#include "AP_BattMonitor.h"
#include "AP_BattMonitor_Backend.h"
#if HAL_ENABLE_DRONECAN_DRIVERS
#include <AP_DroneCAN/AP_DroneCAN.h>

#define AP_BATTMONITOR_UAVCAN_TIMEOUT_MICROS         5000000 // sensor becomes unhealthy if no successful readings for 5 seconds

#ifndef AP_BATTMONITOR_UAVCAN_MPPT_DEBUG
#define AP_BATTMONITOR_UAVCAN_MPPT_DEBUG 0
#endif

class AP_BattMonitor_DroneCAN : public AP_BattMonitor_Backend
{
public:
    enum BattMonitor_DroneCAN_Type {
        UAVCAN_BATTERY_INFO = 0
    };

    /// Constructor
    AP_BattMonitor_DroneCAN(AP_BattMonitor &mon, AP_BattMonitor::BattMonitor_State &mon_state, BattMonitor_DroneCAN_Type type, AP_BattMonitor_Params &params);

    static const struct AP_Param::GroupInfo var_info[];

    void init() override {}

    /// Read the battery voltage and current.  Should be called at 10hz
    void read() override;

    /// capacity_remaining_pct - returns true if the percentage is valid and writes to percentage argument
    bool capacity_remaining_pct(uint8_t &percentage) const override;

    bool has_temperature() const override { return _has_temperature; }

    bool has_current() const override { return true; }

    // Always have consumed energy, either directly from BatteryInfoAux msg or by cumulative current draw
    bool has_consumed_energy() const override { return true; }

    bool has_time_remaining() const override { return _has_time_remaining; }

    bool has_cell_voltages() const override { return _has_cell_voltages; }

    bool get_cycle_count(uint16_t &cycles) const override;

    // return mavlink fault bitmask (see MAV_BATTERY_FAULT enum)
    uint32_t get_mavlink_fault_bitmask() const override;

    static bool subscribe_msgs(AP_DroneCAN* ap_dronecan);
    static AP_BattMonitor_DroneCAN* get_dronecan_backend(AP_DroneCAN* ap_dronecan, uint8_t node_id, uint8_t battery_id);
    static void handle_battery_info_trampoline(AP_DroneCAN *ap_dronecan, const CanardRxTransfer& transfer, const uavcan_equipment_power_BatteryInfo &msg);
    static void handle_battery_info_aux_trampoline(AP_DroneCAN *ap_dronecan, const CanardRxTransfer& transfer, const ardupilot_equipment_power_BatteryInfoAux &msg);
    static void handle_mppt_stream_trampoline(AP_DroneCAN *ap_dronecan, const CanardRxTransfer& transfer, const mppt_Stream &msg);

    void mppt_set_powered_state(bool power_on) override;

    // reset remaining percentage to given value
    bool reset_remaining(float percentage) override;

private:
    void handle_battery_info(const uavcan_equipment_power_BatteryInfo &msg);
    void handle_battery_info_aux(const ardupilot_equipment_power_BatteryInfoAux &msg);
    void update_interim_state(const float voltage, const float current, const float temperature_K, const uint8_t soc, uint8_t soh_pct);

    static bool match_battery_id(uint8_t instance, uint8_t battery_id);

    // MPPT related enums and methods
    enum class MPPT_FaultFlags : uint8_t {
        OVER_VOLTAGE        = (1U<<0),
        UNDER_VOLTAGE       = (1U<<1),
        OVER_CURRENT        = (1U<<2),
        OVER_TEMPERATURE    = (1U<<3),
    };
    void handle_mppt_stream(const mppt_Stream &msg);
    void mppt_check_powered_state();

#if AP_BATTMONITOR_UAVCAN_MPPT_DEBUG
    static void mppt_report_faults(const uint8_t instance, const uint8_t fault_flags);
    static const char* mppt_fault_string(const MPPT_FaultFlags fault);
#endif

    // Return true if the DroneCAN state of charge should be used.
    // Return false if state of charge should be calculated locally by counting mah.
    bool use_CAN_SoC() const;

    AP_BattMonitor::BattMonitor_State _interim_state;

    HAL_Semaphore _sem_battmon;

    AP_DroneCAN* _ap_dronecan;
    uint8_t _soc;
    uint8_t _node_id;
    uint16_t _cycle_count;
    float _remaining_capacity_wh;
    float _full_charge_capacity_wh;
    bool _has_temperature;
    bool _has_cell_voltages;
    bool _has_time_remaining;
    bool _has_battery_info_aux;
    uint8_t _instance;                  // instance of this battery monitor

    AP_Float _curr_mult;                 // scaling multiplier applied to current reports for adjustment
    // MPPT variables
    struct {
        bool is_detected;               // true if this UAVCAN device is a Packet Digital MPPT
        bool powered_state;             // true if the mppt is powered on, false if powered off
        bool vehicle_armed_last;        // latest vehicle armed state. used to detect changes and power on/off MPPT board
        uint8_t fault_flags;            // bits holding fault flags
        uint32_t powered_state_remote_ms; // timestamp of when request was sent, zeroed on response. Used to retry
    } _mppt;

    void handle_outputEnable_response(const CanardRxTransfer&, const mppt_OutputEnableResponse&);

    Canard::ObjCallback<AP_BattMonitor_DroneCAN, mppt_OutputEnableResponse> mppt_outputenable_res_cb{this, &AP_BattMonitor_DroneCAN::handle_outputEnable_response};
    Canard::Client<mppt_OutputEnableResponse> *mppt_outputenable_client;
};
#endif